FreeRadius 2.0.5... canŽt make it work

[Jan Strauch]

Hello world !

I try to set up a new FR-server (v2.0.5). I lost 4 days until now and it still does not work.
It just generates amounts of output without accepting anything:

terminal 1 : radiusd -X gives me :

FreeRADIUS Version 2.0.5, for host i686-pc-linux-gnu, built on Oct  9 2008 at 16:13:43
Copyright (C) 1999-2008 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/snmp.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/sql.conf
including configuration file /etc/raddb/sql/mysql/dialup.conf
including configuration file /etc/raddb/sql/mysql/counter.conf
including configuration file /etc/raddb/policy.conf
including dictionary file /etc/raddb/dictionary
main {
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/radius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/radius/radacct"
        hostname_lookups = yes
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        allow_core_dumps = no
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = no
 log {
        stripped_names = yes
        auth = yes
        auth_badpass = yes
        auth_goodpass = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating expr
 Module: Linked to module rlm_expiration
 Module: Instantiating expiration
  expiration {
        reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating logintime
  logintime {
        reply-message = "You are calling outside your allowed timespan  "
        minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server {
 modules {
 }
}
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 1812
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
}
main {
        snmp = no
        smux_password = ""
        snmp_write_access = no
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Ready to process requests.

terminal 2 : radtest test test localhost 0 test

Sending Access-Request of id 178 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 127.0.0.2
        NAS-Port = 0
Sending Access-Request of id 178 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 127.0.0.2
        NAS-Port = 0
Sending Access-Request of id 178 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 127.0.0.2
        NAS-Port = 0
Sending Access-Request of id 178 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 127.0.0.2
        NAS-Port = 0
Sending Access-Request of id 178 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 127.0.0.2
        NAS-Port = 0
Sending Access-Request of id 178 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 127.0.0.2
        NAS-Port = 0
Sending Access-Request of id 178 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 127.0.0.2
        NAS-Port = 0
Sending Access-Request of id 178 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 127.0.0.2
        NAS-Port = 0
Sending Access-Request of id 178 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 127.0.0.2
        NAS-Port = 0
Sending Access-Request of id 178 to 127.0.0.1 port 1812
        User-Name = "test"
        User-Password = "test"
        NAS-IP-Address = 127.0.0.2
        NAS-Port = 0
radclient: no response from server for ID 178 socket 3

Parallel on terminal 1 :
Ignoring request to authentication address * port 1812 from unknown client 127.0.0.1 port 59802
Ready to process requests.
Ignoring request to authentication address * port 1812 from unknown client 127.0.0.1 port 59802
Ready to process requests.
...
 ... but 127.0.0.1 is not unknown 

sql.conf : readclients = yes
clients.conf : completely commented out

mysql> select * from nas order by id desc limit 1;
+----+-----------+-----------+--------+-------+--------+-----------+-------------+
| id   | nasname   | shortname | type     | ports  | secret  | community | description   | 
+----+-----------+-----------+--------+-------+--------+-----------+-------------+
| 56  | 127.0.0.1  | localhost   | MikTik   |   NULL | test     | NULL        | NULL           | 
+----+-----------+-----------+--------+-------+--------+-----------+-------------+
1 row in set (0.00 sec)

What do I do wrong ?
This thing does not care what I configure, it always does the same, nothing.
I have sqltrace = yes, but after days of trying there is no sqltrace.sql on the server (yes I made updatedb)
there is nearly nothing in the log, but I configured it to log everything (good-auth, bad-auth, etc)

All this worked best with FR 1.x.x.

Please help

thx
_______________________________________________________________________
Aufgepasst: Sind Ihre Daten beim Online-Banking auch optimal geschützt?
Jetzt absichern: https://homebanking.web.de/?mc=mail@footer.hb