Accounting : Alvarion WiMax Base Station as NAS
Ben Wiechman
wiechman.lists at gmail.com
Wed Nov 18 04:49:50 CET 2009
Session-Timeout is supported. At some point you could not set the session
timeout greater than 65536 or the timer rolled over. We simply set ours to a
number lower than that. I haven't tested with the various firmware updates
we've received in the last year to see if this is still the case.
Ben
> -----Original Message-----
> From: freeradius-users-
> bounces+wiechman.lists=gmail.com at lists.freeradius.org
> [mailto:freeradius-users-
> bounces+wiechman.lists=gmail.com at lists.freeradius.org] On Behalf Of
> Sylvain De Muynck
> Sent: Tuesday, November 17, 2009 8:49 PM
> To: freeradius-users at lists.freeradius.org
> Subject: Accounting : Alvarion WiMax Base Station as NAS
>
>
>
> Thanks for your prompt reply,
> I am trying to contact technical support team from Alvarion to get more
> documentations and support however it looks like it is not going to be
> easy regarding all your replies. Ah.. Alvarion as NAS..!
> By the way, for those who tried it, was the session time-out
> (authentication part) working ?
> Regards
> Sylvain
>
>
> Sylvain De Muynck
> Executive assistant to VAS/ISP and head of Operations
> Millicom Lao Co., Ltd. (Tigo Lao)
> 14 Lane Xang Avenue, PO Box 4693
> Vientiane, Lao PDR
> Tigo: +856 207 800 563
> Office: +856 207 800 700
> Fax: +856 207 800 701
> Email: sylvain.demuynck at tigolao.com
>
>
>
> -----Original Message-----
> From: freeradius-users-
> bounces+sylvain.demuynck=tigolao.com at lists.freeradius.org
> [mailto:freeradius-users-
> bounces+sylvain.demuynck=tigolao.com at lists.freeradius.org] On Behalf Of
> freeradius-users-request at lists.freeradius.org
> Sent: Wednesday, November 18, 2009 4:49 AM
> To: freeradius-users at lists.freeradius.org
> Subject: Freeradius-Users Digest, Vol 55, Issue 77
>
> Send Freeradius-Users mailing list submissions to
> freeradius-users at lists.freeradius.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.freeradius.org/mailman/listinfo/freeradius-users
> or, via email, send a message with subject or body 'help' to
> freeradius-users-request at lists.freeradius.org
>
> You can reach the person managing the list at
> freeradius-users-owner at lists.freeradius.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Freeradius-Users digest..."
>
>
> Today's Topics:
>
> 1. Authenticating in a Debian lenny through freeradius
> (Wagner Pereira)
> 2. Re: Nas update with DynDNS (????????? ?????)
> 3. RE: SSID based authentication (Garber, Neal)
> 4. RE: Accounting : Alvarion WiMax Base Station as NAS (Ben Wiechman)
> 5. Re: Authenticate Many Sites on dynamic IPs through One
> Freeradius Server (Charles (KOL) Goma)
> 6. Re: Book About Free-Radius Configurations (INACIO ALVES)
> 7. Re: Book About Free-Radius Configurations (Marinko Tarlac)
> 8. adding eap-tls/peap/ttls support to freeradius problem
> (Tomas Pelka)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 17 Nov 2009 10:14:59 -0200
> From: Wagner Pereira <wpereira at pop-sp.rnp.br>
> Subject: Authenticating in a Debian lenny through freeradius
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Message-ID: <4B0293C3.8030606 at pop-sp.rnp.br>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi,
>
> What should I edit in a Debian lenny aiming to authenticate my user in
> another server running freeradius (via PAP method, according to Alan
> Dekok in http://deployingradius.com)
>
> Thanks.
>
> --
>
> Wagner Pereira
>
> PoP-SP/RNP - Ponto de Presen?a da RNP em S?o Paulo
> CCE/USP - Centro de Computa??o Eletr?nica da Universidade de S?o Paulo
> http://www.pop-sp.rnp.br
> (11) 3091-8902
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 17 Nov 2009 15:42:41 +0300
> From: ????????? ????? <avkosykh at gmail.com>
> Subject: Re: Nas update with DynDNS
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Message-ID:
> <879ce10d0911170442n660b450u5b45628ba274526e at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> hi.
>
> try to use sites-available/dynamic-clients. i'm use this fearture, add
> new
> client to mysql table and don't need to restart radius.
>
>
> ? ?????????,
> ????? ?????????
>
>
> 2009/11/17 Fahd Kasri <fahd.kasri at weblib.eu>
>
> > To avoid restarting radiusd everytime the Nas table is updated, I want
> to
> > use something similar to DynDNS. Does radiusd cache the domain's IP
> address
> > at startup or does it resolve the domain name every time?
> >
> > --
> > Fahd
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <https://lists.freeradius.org/pipermail/freeradius-
> users/attachments/20091117/5becd87c/attachment.html>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 17 Nov 2009 09:43:54 -0500
> From: "Garber, Neal" <Neal.Garber at energyeast.com>
> Subject: RE: SSID based authentication
> To: "'FreeRadius users mailing list'"
> <freeradius-users at lists.freeradius.org>
> Message-ID:
> <3FF48394E621F14F97A9117CF92D138E582247567C at EEROCH1CMS1.Energyeast
> .net>
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> > If I want an enduser to be able to connect to the same SSID on
> multiple AP?s then I can not use
> > "Called-Station-ID" since it also includes information about the mac
> address for a specific AP.
> > So how do I do to be able to authenticate by just using the SSID and
> not the mac address for a specific AP?
>
> Check your AP documentation to see if it can send an attribute
> containing the SSID. On the Cisco AP's that we use, it is sent in
> "Cisco-AVPair".
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <https://lists.freeradius.org/pipermail/freeradius-
> users/attachments/20091117/7f939f90/attachment.html>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 17 Nov 2009 09:05:40 -0600
> From: "Ben Wiechman" <wiechman.lists at gmail.com>
> Subject: RE: Accounting : Alvarion WiMax Base Station as NAS
> To: "FreeRadius users mailing list"
> <freeradius-users at lists.freeradius.org>
> Message-ID: <4b02bbc7.0e0bca0a.3428.3050 at mx.google.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Alvarion does not support Interim updates, nor do they provide any of
> the
> other information you are looking for.
>
> Ben
>
> > -----Original Message-----
> > From: freeradius-users-
> > bounces+wiechman.lists=gmail.com at lists.freeradius.org
> > [mailto:freeradius-users-
> > bounces+wiechman.lists=gmail.com at lists.freeradius.org] On Behalf Of
> Alan
> > DeKok
> > Sent: Tuesday, November 17, 2009 5:19 AM
> > To: FreeRadius users mailing list
> > Subject: Re: Accounting : Alvarion WiMax Base Station as NAS
> >
> > Sylvain De Muynck wrote:
> > > As everyone already tried to use BreeMax Alvarion BTS as NAS for the
> > > freeradius ?
> >
> > Lots. The experiences haven't been good.
> >
> > > I got trouble for the accounting part of it :
> > >
> > > . Cannot see upload/download (acct-input/output-octets)
> > > . Total time is always equal to 0
> > > . No interim updates (even if Acct-Interim-Updates
> configured)
> > >
> > > It seems like I should configure this on my NAS however I do not
> know
> > > how could I do it.
> >
> > Ask Alvarion. If they can't help, buy a NAS from a manufacturer who
> > provides documentation and support.
> >
> > Alan DeKok.
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 17 Nov 2009 19:38:12 +0200
> From: "Charles \(KOL\) Goma" <charles at goma.kivu-online.com>
> Subject: Re: Authenticate Many Sites on dynamic IPs through One
> Freeradius Server
> To: <freeradius-users at lists.freeradius.org>
> Message-ID: <004501ca67ac$bdff4720$19fe10ac at mordekai>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I have test-configured freeradius to work on my hotspot. It works fine
> and I am happy.
>
> I am planning to have about 17 of my sites authenticate through one
> freeradius server. These 17 HOTSPOTS are in different parts of the
> country and have dynamic IPs.
>
> 1. How do I configure that in clients.conf?
>
> 2. Bandwidth charges are different in most of the 17 sites. How can i
> set these billing difference in my setup.
>
> Any lead on these two will be highly appreciated.
>
> Charles
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <https://lists.freeradius.org/pipermail/freeradius-
> users/attachments/20091117/9894b588/attachment.html>
>
> ------------------------------
>
> Message: 6
> Date: Tue, 17 Nov 2009 21:03:03 +0000 (GMT)
> From: INACIO ALVES <inacioalves at yahoo.de>
> Subject: Re: Book About Free-Radius Configurations
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Message-ID: <437989.19163.qm at web27406.mail.ukl.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Thanks Alan Dekok,
>
> I think that I saw in your blog that you is writting a book about
> RADIUS. The project continues?
> And about the book
> http://www.amazon.com/Radius-Jonathan-
> Hassell/dp/0596003226/ref=pd_sim_b_3
> do you know it? I'm need to buy some book to configure a freeradius
> server on my network.
>
> Thanks,
>
> In?cio Alves
>
> Bacharel em Matem?tica(UFC)/T?cnico em Conectividade(IFCE)
> http://www.polluxweb.com/inacioalves/site
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <https://lists.freeradius.org/pipermail/freeradius-
> users/attachments/20091117/70735421/attachment.html>
>
> ------------------------------
>
> Message: 7
> Date: Tue, 17 Nov 2009 22:20:26 +0100
> From: Marinko Tarlac <mangia81 at gmail.com>
> Subject: Re: Book About Free-Radius Configurations
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Message-ID: <4B03139A.6050908 at gmail.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> I have that book and I don't recommend it. It seems just like a RFC
> copy.
>
> Unfort. you do not have to much options. The better idea is to read this
> list and ask if you find something that bothers you :)
>
> Best regards
>
> INACIO ALVES wrote:
> > Thanks Alan Dekok,
> >
> > I think that I saw in your blog that you is writting a book about
> > RADIUS. The project continues?
> > And about the book
> > http://www.amazon.com/Radius-Jonathan-
> Hassell/dp/0596003226/ref=pd_sim_b_3
> > do you know it? I'm need to buy some book to configure a freeradius
> > server on my network.
> >
> > Thanks,
> >
> > In?cio Alves
> >
> > Bacharel em Matem?tica(UFC)/T?cnico em Conectividade(IFCE)
> > http://www.polluxweb.com/inacioalves/site
> >
> >
> > ----------------------------------------------------------------------
> --
> >
> > -
> > List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>
>
> ------------------------------
>
> Message: 8
> Date: Tue, 17 Nov 2009 22:48:57 +0100
> From: Tomas Pelka <tompelka at gmail.com>
> Subject: adding eap-tls/peap/ttls support to freeradius problem
> To: freeradius-users at lists.freeradius.org
> Message-ID: <4B031A49.4040908 at gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hi guys,
> have some problems with compiling freeradius with eap-tls/peap/ttls
> support.
>
> configure running:
> ./configure --prefix=/usr \
> --exec-prefix=/usr \
> --mandir=$(mandir) \
> --sysconfdir=/etc \
> --libdir=$(libdir) \
> --datadir=/usr/share \
> --localstatedir=/var \
> --with-raddbdir=$(raddbdir) \
> --with-logdir=/var/log/$(package) \
> --enable-ltdl-install=no --enable-strict-dependencies \
> --with-large-files --with-udpfromto --with-edir \
> --enable-developer \
> --config-cache \
> --with-rlm_eap_tls \
> --with-rlm_eap_ttls \
> --with-rlm_eap_peap \
> --without-rlm_eap_tnc \
> --without-rlm_otp \
> --with-rlm_sql_postgresql_lib_dir=`pg_config --libdir` \
> --with-rlm_sql_postgresql_include_dir=`pg_config --
> includedir` \
> --with-openssl \
> --without-rlm_eap_ikev2 \
> --without-rlm_sql_oracle \
> --without-rlm_sql_unixodbc \
> --with-system-libtool \
> --without-rlm_counter \
> --without-rlm_ldap
>
>
> Gcc output:
> /usr/bin/libtool --mode=link gcc -release 2.0.4 \
> -module -export-dynamic -o rlm_sql_log.la \
> -rpath /usr/lib/freeradius rlm_sql_log.lo rlm_sql_log.c
> /usr/src/freeradius-2.0.4+dfsg/src/lib/libfreeradius-radius.la
> /usr/src/freeradius-2.0.4+dfsg/src/modules/rlm_sql/.libs/rlm_sql.la
> -lnsl -lresolv -lpthread
> libtool: link: cannot find the library
> `/usr/src/freeradius-2.0.4+dfsg/src/modules/rlm_sql/.libs/rlm_sql.la' or
> unhandled argument
> `/usr/src/freeradius-2.0.4+dfsg/src/modules/rlm_sql/.libs/rlm_sql.la'
> make[7]: *** [rlm_sql_log.la] Error 1
> make[7]: Leaving directory
> `/usr/src/freeradius-2.0.4+dfsg/src/modules/rlm_sql_log'
> make[6]: *** [common] Error 2
> make[6]: Leaving directory `/usr/src/freeradius-2.0.4+dfsg/src/modules'
> make[5]: *** [all] Error 2
> make[5]: Leaving directory `/usr/src/freeradius-2.0.4+dfsg/src/modules'
> make[4]: *** [common] Error 2
> make[4]: Leaving directory `/usr/src/freeradius-2.0.4+dfsg/src'
> make[3]: *** [all] Error 2
> make[3]: Leaving directory `/usr/src/freeradius-2.0.4+dfsg/src'
> make[2]: *** [common] Error 2
> make[2]: Leaving directory `/usr/src/freeradius-2.0.4+dfsg'
> make[1]: *** [all] Error 2
> make[1]: Leaving directory `/usr/src/freeradius-2.0.4+dfsg'
> make: *** [build-arch-stamp] Error 2
>
> Am I missing something?
> Thanks for advice.
>
> --
> Tom
>
>
> ------------------------------
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>
> End of Freeradius-Users Digest, Vol 55, Issue 77
> ************************************************
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list