7600 -Pppoe service ,hardware requirements

[Ivan Kalik]

This is freeradius, not Cisco support list.

Ivan Kalik
Kalik Informatika ISP

> I want to implement the pppoe service at one cisco 7600
> -sup720bxl-SIp600-Spa5gbe  ,but no success.
> I have searching at the cisco web to see if is possible with SIp 600 but
> not found .I am not sure that the SIP 600 is OK.
> The router has one another SIP400 but the SPA-5X1GE is not suported by
> this SIP
> 3/1 5xGE SPA                    SPA-5X1GE          JAB093507M9  2.2
> OutSrvc
>
> The IOS version is 122-33.SRD.
>
> interface GigabitEthernet1/0/4
>  no ip address
>  vlan-id dot1q 60
>   pppoe enable group vlan60
>   exit-vlan-config
>  !
>  vlan-id dot1q 88
>   pppoe enable group vlan60
>   exit-vlan-config
>
>
> bba-group pppoe vlan60
>  virtual-template 60
>  sessions per-vc limit 500
>  sessions per-mac limit 1
>  sessions per-vlan limit 1024
>  sessions auto cleanup
> interface Virtual-Template60
>
>  mtu 1492
>  ip unnumbered Loopback60
>  no ip redirects
>  no ip unreachables
>  no ip proxy-arp
>  ip nat inside
>  peer default ip address pool vlan60-pool
>  ppp mtu adaptive
>  ppp authentication pap chap
>
> Any idea?
>
> Regards
>
> Ilir
>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html