..::Huntgroup Issues::..

[Alfonso Alejandro Reyes Jiménez]

Hi, I'm trying to use the huntgroup feature on the freeradius software
with out luck. I think I'm missing something that's why I'm sending this
email maybe you can help me.

Right now I have the following files:

huntgroups file at the end:

squid         NAS-IP-Address == 127.0.0.1

users file at the end:

alfonso  Auth-Type := Local, User-Password == "testing", Huntgroup-Name
== "squid"

clients.conf at the end:

client 127.0.0.1 {
       secret          = xxxxxxxxxxx
       shortname       = squid
}

When I try with the radtest to log in, I get an access-reject.

Here's the client side response:

[root at mscitum raddb]# radtest alfonso testing localhost 10 xxxxxxx
Sending Access-Request of id 134 to 127.0.0.1 port 1812
        User-Name = "alfonso"
        User-Password = "testing"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 10
rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=134,
length=20


Here's the output of the debug, it seems that it doesn't find the config
file.

rad_recv: Access-Request packet from host 127.0.0.1:36858, id=134,
length=59
        User-Name = "alfonso"
        User-Password = "testing"
        NAS-IP-Address = 255.255.255.255
        NAS-Port = 10
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
  modcall[authorize]: module "preprocess" returns ok for request 1
  modcall[authorize]: module "chap" returns noop for request 1
  modcall[authorize]: module "mschap" returns noop for request 1
    rlm_realm: No '@' in User-Name = "alfonso", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 1
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 1
    users: Matched entry DEFAULT at line 152
  modcall[authorize]: module "files" returns ok for request 1
modcall: leaving group authorize (returns ok) for request 1
  rad_check_password:  Found Auth-Type System
auth: type "System"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
  modcall[authenticate]: module "unix" returns notfound for request 1
modcall: leaving group authenticate (returns notfound) for request 1
auth: Failed to validate the user.
Delaying request 1 for 1 seconds
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 134 to 127.0.0.1 port 36858
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 134 with timestamp 4c7319f1
Nothing to do.  Sleeping until we see a request.

May be I'm missing to enable some feature, thanks in advance for your
help.

Regards 

Alfonso.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20100823/0f49ffe1/attachment.html>