Assign VLAN

[Iliya Peregoudov]

VLAN ID assignment should be done in Access-Accept, not in 
Access-Challenge. Try to compare Access-Accept sent by Cisco ACS and 
Access-Accept sent by FreeRADIUS.

Rangel, Luciano wrote:
> Alan,
> 
> 
> In my switch I see that radius send vlan 0 but as Access-chalange send vlan 200 as below.
> 
> Sending Access-Challenge of id 155 to 10.0.0.3 port 1645
>         Tunnel-Type:0 = VLAN
>         Tunnel-Medium-Type:0 = IEEE-802
>         Tunnel-Private-Group-Id:0 = "200"
>         EAP-Message = 0x0103001604108840585485ec8c2c8e14826bdf5ec42b
>         Message-Authenticator = 0x00000000000000000000000000000000
>         State = 0x42b5c77d42b6c3940045ff626d0da231