Assign VLAN

Rangel, Luciano luciano.rangel at logica.com
Fri Dec 10 01:06:23 CET 2010


I change the options copy_request_to_tunnel and use_tunneled_reply to yes in eap.conf (peap section) and it work.

Sending Access-Accept of id 180 to 10.0.0.3 port 1645
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "200"
        User-Name = "GROUPINFRA\\rangell"
        MS-MPPE-Recv-Key = 0xb51c2c8aac12b69bfbe31c1e465fd0f467af4c88506f8dcf510ea66826a31669
        MS-MPPE-Send-Key = 0xcb5f1f33817d2fae734542c23733f3432dd320c2e52a7e8da192916ec6381237
        EAP-Message = 0x030c0004
        Message-Authenticator = 0x00000000000000000000000000000000
Finished request 10.

THANKS FOR HELP AND PATIENCE FROM ALL AND SORRY FOR THE LETTLE KNOWLEDGE ON FREERADIUS.

Best Regards,

Luciano Rangel





-----Original Message-----
From: freeradius-users-bounces+luciano.rangel=logica.com at lists.freeradius.org [mailto:freeradius-users-bounces+luciano.rangel=logica.com at lists.freeradius.org] On Behalf Of Alan Buxey
Sent: quinta-feira, 9 de dezembro de 2010 21:24
To: FreeRadius users mailing list
Subject: Re: Assign VLAN

Hi,

> Freeradius Access-Accept:
> 
> Sending Access-Accept of id 29 to 10.0.0.3 port 1645
>         MS-MPPE-Recv-Key = 0x88a007eda1d4841ea348c3a0d49fd963e3f188a3f77509c3d3eb045d3a23fa7c
>         MS-MPPE-Send-Key = 0xbe8168ed341e6a4f0332a9d0c8b1893f574e98fa4af7af74dbebf944f687eaf7
>         EAP-Message = 0x030c0004
>         Message-Authenticator = 0x00000000000000000000000000000000
>         User-Name = "GROUPINFRA\\rangell"
> Finished request 10.
> 
> I don´t see attributes (VLAN, IEEE-802 and 200) in freerdius access-accept, but in a stretch of logs I see messages below:

copy the PEAP tunnel attributes to the outer - if you read eap.conf
that is provided with default config you will see the option to set
that to 'yes'

alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html


Think green - keep it on the screen.

This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.






More information about the Freeradius-Users mailing list