Radius Manager

Teguh Kurniawan teguhkurniawanwijaya at gmail.com
Fri Feb 12 15:39:03 CET 2010


Hello,
I use "ancient" Free Radius 1.1.7 packages (from Ubuntu 8.04/Hardy) on
Ubuntu Server 9.10. I use "ancient" Free Radius, because the
requirement from Radius Manager we buy from
http://www.radius-manager.com/.
But after finish setting up the configuration for Free Radius, I've
got some problem. Some problem I could fixed after asking some
question from this mailing list and searching from google.
But I've got another problem, my testing is rejected. What should I do ?
Best Regards,

Teguh Kurniawan

# radtest user 1111 localhost 1812 testing123
Sending Access-Request of id 172 to 127.0.0.1 port 1812
       User-Name = "user"
       User-Password = "1111"
       NAS-IP-Address = 255.255.255.255
       NAS-Port = 1812
rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=172, length=20

/etc/hosts
127.0.0.1       localhost
192.168.0.3     radiusmanager.testme.net        radiusmanager

# freeradius -X
Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /etc/freeradius/proxy.conf
Config:   including file: /etc/freeradius/clients.conf
Config:   including file: /etc/freeradius/snmp.conf
Config:   including file: /etc/freeradius/eap.conf
Config:   including file: /etc/freeradius/sql.conf
 main: prefix = "/usr"
 main: localstatedir = "/var"
 main: logdir = "/var/log/freeradius"
 main: libdir = "/usr/lib/freeradius"
 main: radacctdir = "/var/log/freeradius/radacct"
 main: hostname_lookups = no
 main: snmp = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 1812
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/var/log/freeradius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/var/run/freeradius/freeradius.pid"
 main: user = "freerad"
 main: group = "freerad"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = no
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "crypt"
 pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "/etc/shadow"
 unix: group = "(null)"
 unix: radwtmp = "/var/log/freeradius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
 preprocess: huntgroups = "/etc/freeradius/huntgroups"
 preprocess: hints = "/etc/freeradius/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
 preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
 files: usersfile = "/etc/freeradius/users"
 files: acctusersfile = "/etc/freeradius/acct_users"
 files: preproxy_usersfile = "/etc/freeradius/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Module: Loaded SQL
 sql: driver = "rlm_sql_mysql"
 sql: server = "localhost"
 sql: port = ""
 sql: login = "radius"
 sql: password = "radius123"
 sql: radius_db = "radius"
 sql: nas_table = "nas"
 sql: sqltrace = no
 sql: sqltracefile = "/var/log/freeradius/sqltrace.sql"
 sql: readclients = no
 sql: deletestalesessions = yes
 sql: num_sql_socks = 5
 sql: sql_user_name = "%{User-Name}"
 sql: default_user_profile = ""
 sql: query_on_not_found = no
 sql: authorize_check_query = "SELECT id, UserName, Attribute, Value,
op           FROM radcheck           WHERE Username =
'%{SQL-User-Name}'           ORDER BY id"
 sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value,
op           FROM radreply           WHERE Username =
'%{SQL-User-Name}'           ORDER BY id"
 sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
 FROM radgroupcheck,usergroup WHERE usergroup.Username =
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName
ORDER BY radgroupcheck.id"
 sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
 FROM radgroupreply,usergroup WHERE usergroup.Username =
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName
ORDER BY radgroupreply.id"
 sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
 sql: accounting_update_query = "           UPDATE radacct
SET              FramedIPAddress = '%{Framed-IP-Address}',
 AcctSessionTime     = '%{Acct-Session-Time}',
AcctInputOctets     = '%{Acct-Input-Gigawords:-0}'  << 32 |
                       '%{Acct-Input-Octets:-0}',
AcctOutputOctets    = '%{Acct-Output-Gigawords:-0}' << 32 |
                       '%{Acct-Output-Octets:-0}'           WHERE
AcctSessionId = '%{Acct-Session-Id}'           AND UserName        =
'%{SQL-User-Name}'           AND NASIPAddress    =
'%{NAS-IP-Address}'"
 sql: accounting_update_query_alt = "           INSERT INTO radacct
        (AcctSessionId,    AcctUniqueId,      UserName,
Realm,            NASIPAddress,      NASPortId,
NASPortType,      AcctStartTime,     AcctSessionTime,
AcctAuthentic,    ConnectInfo_start, AcctInputOctets,
AcctOutputOctets, CalledStationId,   CallingStationId,
ServiceType,      FramedProtocol,    FramedIPAddress,
AcctStartDelay,   XAscendSessionSvrKey)           VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}',              '%{NAS-Port-Type}',
DATE_SUB('%S',                       INTERVAL (%{Acct-Session-Time:-0}
+                                 %{Acct-Delay-Time:-0}) SECOND),
                '%{Acct-Session-Time}',
'%{Acct-Authentic}', '',              '%{Acct-Input-Gigawords:-0}' <<
32 |              '%{Acct-Input-Octets:-0}',
'%{Acct-Output-Gigawords:-0}' << 32 |
'%{Acct-Output-Octets:-0}',              '%{Called-Station-Id}',
'%{Calling-Station-Id}',              '%{Service-Type}',
'%{Framed-Protocol}',              '%{Framed-IP-Address}',
 '0', '%{X-Ascend-Session-Svr-Key}')"
 sql: accounting_start_query = "           INSERT INTO radacct
   (AcctSessionId,    AcctUniqueId,     UserName,              Realm,
          NASIPAddress,     NASPortId,              NASPortType,
AcctStartTime,    AcctStopTime,              AcctSessionTime,
AcctAuthentic,    ConnectInfo_start,              ConnectInfo_stop,
AcctInputOctets,  AcctOutputOctets,              CalledStationId,
CallingStationId, AcctTerminateCause,              ServiceType,
FramedProtocol,   FramedIPAddress,              AcctStartDelay,
AcctStopDelay,    XAscendSessionSvrKey)           VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}',              '%{NAS-Port-Type}', '%S', '0',
 '0', '%{Acct-Authentic}', '%{Connect-Info}',              '', '0',
'0',              '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
            '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}',              '%{Acct-Delay-Time:-0}', '0',
'%{X-Ascend-Session-Svr-Key}')"
 sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime =
'%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start =
'%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND
UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
 sql: accounting_stop_query = "           UPDATE radacct SET
  AcctStopTime       = '%S',              AcctSessionTime    =
'%{Acct-Session-Time}',              AcctInputOctets    =
'%{Acct-Input-Gigawords:-0}' << 32 |
'%{Acct-Input-Octets:-0}',              AcctOutputOctets   =
'%{Acct-Output-Gigawords:-0}' << 32 |
 '%{Acct-Output-Octets:-0}',              AcctTerminateCause =
'%{Acct-Terminate-Cause}',              AcctStopDelay      =
'%{Acct-Delay-Time:-0}',              ConnectInfo_stop   =
'%{Connect-Info}'           WHERE AcctSessionId   =
'%{Acct-Session-Id}'           AND UserName          =
'%{SQL-User-Name}'           AND NASIPAddress      =
'%{NAS-IP-Address}'"
 sql: accounting_stop_query_alt = "           INSERT INTO radacct
      (AcctSessionId, AcctUniqueId, UserName,              Realm,
NASIPAddress, NASPortId,              NASPortType, AcctStartTime,
AcctStopTime,              AcctSessionTime, AcctAuthentic,
ConnectInfo_start,              ConnectInfo_stop, AcctInputOctets,
AcctOutputOctets,              CalledStationId, CallingStationId,
AcctTerminateCause,              ServiceType, FramedProtocol,
FramedIPAddress,              AcctStartDelay, AcctStopDelay)
VALUES             ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
            '%{SQL-User-Name}',              '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}',              '%{NAS-Port-Type}',
          DATE_SUB('%S',                  INTERVAL
(%{Acct-Session-Time:-0} +                  %{Acct-Delay-Time:-0})
SECOND),              '%S', '%{Acct-Session-Time}',
'%{Acct-Authentic}', '',              '%{Connect-Info}',
'%{Acct-Input-Gigawords:-0}' << 32 |
'%{Acct-Input-Octets:-0}',              '%{Acct-Output-Gigawords:-0}'
<< 32 |              '%{Acct-Output-Octets:-0}',
'%{Called-Station-Id}', '%{Calling-Station-Id}',
'%{Acct-Terminate-Cause}',              '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}',              '0',
'%{Acct-Delay-Time:-0}')"
 sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE
UserName='%{SQL-User-Name}'"
 sql: connect_failure_retry_delay = 60
 sql: simul_count_query = "SELECT COUNT(*)
 FROM radacct                              WHERE
UserName='%{SQL-User-Name}'                              AND
AcctStopTime = 0"
 sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
                              NASIPAddress, NASPortId,
FramedIPAddress,                                CallingStationId,
FramedProtocol                                FROM radacct
                  WHERE UserName='%{SQL-User-Name}'
            AND AcctStopTime = 0"
 sql: postauth_query = "INSERT into radpostauth (user, pass, reply,
date) values ('%{User-Name}', '%{User-Password:-Chap-Password}',
'%{reply:Packet-Type}', NOW())"
 sql: safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded Acct-Unique-Session-Id
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:55166, id=172, length=56
       User-Name = "user"
       User-Password = "1111"
       NAS-IP-Address = 255.255.255.255
       NAS-Port = 1812
 Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
 modcall[authorize]: module "preprocess" returns ok for request 0
 modcall[authorize]: module "chap" returns noop for request 0
 modcall[authorize]: module "mschap" returns noop for request 0
   rlm_realm: No '@' in User-Name = "user", looking up realm NULL
   rlm_realm: No such realm "NULL"
 modcall[authorize]: module "suffix" returns noop for request 0
 rlm_eap: No EAP-Message, not doing EAP
 modcall[authorize]: module "eap" returns noop for request 0
   users: Matched entry DEFAULT at line 217
radius_xlat:  '/usr/local/bin/rmauth "255.255.255.255" "user""" "1812"'
 modcall[authorize]: module "files" returns ok for request 0
radius_xlat:  'user'
rlm_sql (sql): sql_set_user escaped user --> 'user'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op
FROM radcheck           WHERE Username = 'user'           ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
 FROM radgroupcheck,usergroup WHERE usergroup.Username = 'user' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY
radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op
FROM radreply           WHERE Username = 'user'           ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
 FROM radgroupreply,usergroup WHERE usergroup.Username = 'user' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY
radgroupreply.id'
rlm_sql (sql): Released sql socket id: 4
 modcall[authorize]: module "sql" returns ok for request 0
rlm_pap: Found existing Auth-Type, not changing it.
 modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns ok) for request 0
 rad_check_password:  Found Auth-Type Local
auth: type Local
auth: user supplied User-Password matches local User-Password
 Processing the session section of radiusd.conf
modcall: entering group session for request 0
radius_xlat:  'user'
rlm_sql (sql): sql_set_user escaped user --> 'user'
radius_xlat:  'SELECT COUNT(*)                              FROM
radacct                              WHERE UserName='user'
                AND AcctStopTime = 0'
rlm_sql (sql): Reserving sql socket id: 3
rlm_sql (sql): Released sql socket id: 3
 modcall[session]: module "sql" returns ok for request 0
modcall: leaving group session (returns ok) for request 0
cfg.c, line 175: no permission for configfile
Exec-Program output:
Exec-Program: returned: 1
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 172 to 127.0.0.1 port 55166
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 172 with timestamp 4b7537cd
Nothing to do.  Sleeping until we see a request.



More information about the Freeradius-Users mailing list