Accounting and SQL
David Peterson
davidp at wirelessconnections.net
Sat Jul 10 04:25:04 CEST 2010
Yes I have FreeRadius working with the Extreme and the 4-Motion BSR.
Contact me off-list if you need any support.
David
-----Original Message-----
From:
freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradius.org
[mailto:freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradiu
s.org] On Behalf Of Ben Wiechman
Sent: Friday, July 09, 2010 5:56 PM
To: FreeRadius users mailing list
Subject: RE: Accounting and SQL
Are you by chance testing the FreeRADIUS ready version of Alvarion's BTS
firmware?
> -----Original Message-----
> From: freeradius-users-
> bounces+wiechman.lists=gmail.com at lists.freeradius.org
> [mailto:freeradius-users-
> bounces+wiechman.lists=gmail.com at lists.freeradius.org] On Behalf Of
> David Peterson
> Sent: Friday, July 09, 2010 1:14 PM
> To: 'FreeRadius users mailing list'
> Subject: RE: Accounting and SQL
>
> To answer my question, the NAS was not sending any data and is now
> fixed and
> sending accounting.
>
> David
>
> -----Original Message-----
> From:
> freeradius-users-bounces+david.peterson=acc-
> corp.net at lists.freeradius.org
> [mailto:freeradius-users-bounces+david.peterson=acc-
> corp.net at lists.freeradiu
> s.org] On Behalf Of David Peterson
> Sent: Friday, July 09, 2010 9:02 AM
> To: 'FreeRadius users mailing list'
> Subject: Accounting and SQL
>
> I have accounting and SQL set up (probably broken). I see the debug
> showing
> it updating table radacct but the table remains empty.
>
> root at ubuntu:/usr/local/etc/raddb# radiusd -X
> FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Jun 21
> 2010
> at 14:47:46
> Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE.
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License v2.
> Starting - reading configuration files ...
> including configuration file /usr/local/etc/raddb/radiusd.conf
> including configuration file /usr/local/etc/raddb/proxy.conf
> including configuration file /usr/local/etc/raddb/clients.conf
> including configuration file
> /usr/local/etc/raddb/sites-available/dynamic-clients
> including files in directory /usr/local/etc/raddb/modules/
> including configuration file /usr/local/etc/raddb/modules/passwd
> including configuration file /usr/local/etc/raddb/modules/mac2vlan
> including configuration file /usr/local/etc/raddb/modules/policy
> including configuration file /usr/local/etc/raddb/modules/wimax
> including configuration file /usr/local/etc/raddb/modules/ippool
> including configuration file /usr/local/etc/raddb/modules/radutmp
> including configuration file /usr/local/etc/raddb/modules/smsotp
> including configuration file /usr/local/etc/raddb/modules/echo
> including configuration file /usr/local/etc/raddb/modules/expr
> including configuration file /usr/local/etc/raddb/modules/pam
> including configuration file /usr/local/etc/raddb/modules/inner-eap
> including configuration file /usr/local/etc/raddb/modules/logintime
> including configuration file /usr/local/etc/raddb/modules/ldap
> including configuration file /usr/local/etc/raddb/modules/pap
> including configuration file /usr/local/etc/raddb/modules/ntlm_auth
> including configuration file /usr/local/etc/raddb/modules/preprocess
> including configuration file /usr/local/etc/raddb/modules/unix
> including configuration file /usr/local/etc/raddb/modules/attr_rewrite
> including configuration file /usr/local/etc/raddb/modules/etc_group
> including configuration file /usr/local/etc/raddb/modules/linelog
> including configuration file
> /usr/local/etc/raddb/modules/sqlcounter_expire_on_login
> including configuration file /usr/local/etc/raddb/modules/digest
> including configuration file /usr/local/etc/raddb/modules/otp
> including configuration file /usr/local/etc/raddb/modules/realm
> including configuration file /usr/local/etc/raddb/modules/acct_unique
> including configuration file /usr/local/etc/raddb/modules/attr_filter
> including configuration file /usr/local/etc/raddb/modules/perl
> including configuration file /usr/local/etc/raddb/modules/krb5
> including configuration file /usr/local/etc/raddb/modules/checkval
> including configuration file /usr/local/etc/raddb/modules/files
> including configuration file /usr/local/etc/raddb/modules/cui
> including configuration file /usr/local/etc/raddb/modules/exec
> including configuration file /usr/local/etc/raddb/modules/expiration
> including configuration file /usr/local/etc/raddb/modules/smbpasswd
> including configuration file /usr/local/etc/raddb/modules/detail.log
> including configuration file /usr/local/etc/raddb/modules/mschap
> including configuration file /usr/local/etc/raddb/modules/sradutmp
> including configuration file /usr/local/etc/raddb/modules/counter
> including configuration file /usr/local/etc/raddb/modules/mac2ip
> including configuration file /usr/local/etc/raddb/modules/detail
> including configuration file
> /usr/local/etc/raddb/modules/detail.example.com
> including configuration file /usr/local/etc/raddb/modules/chap
> including configuration file /usr/local/etc/raddb/modules/sql_log
> including configuration file /usr/local/etc/raddb/modules/always
> including configuration file /usr/local/etc/raddb/eap.conf
> including configuration file /usr/local/etc/raddb/sql.conf
> including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf
> including configuration file
> /usr/local/etc/raddb/sql/mysql/counter.conf
> including configuration file /usr/local/etc/raddb/policy.conf
> including files in directory /usr/local/etc/raddb/sites-enabled/
> including configuration file /usr/local/etc/raddb/sites-enabled/default
> including configuration file
> /usr/local/etc/raddb/sites-enabled/control-socket
> including configuration file /usr/local/etc/raddb/sites-enabled/inner-
> tunnel
> main {
> allow_core_dumps = no
> }
> including dictionary file /usr/local/etc/raddb/dictionary
> main {
> prefix = "/usr/local"
> localstatedir = "/usr/local/var"
> logdir = "/usr/local/var/log/radius"
> libdir = "/usr/local/lib"
> radacctdir = "/usr/local/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 1024
> pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
> checkrad = "/usr/local/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> }
> security {
> max_attributes = 200
> reject_delay = 1
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> realm WiMax.com {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = "testing123"
> nastype = "other"
> }
> client dynamic {
> ipaddr = 192.168.0.0
> netmask = 16
> require_message_authenticator = no
> dynamic_clients = "dynamic_client_server"
> lifetime = 86400
> }
> radiusd: #### Instantiating modules ####
> instantiate {
> Module: Linked to module rlm_exec
> Module: Instantiating exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> }
> Module: Linked to module rlm_expr
> Module: Instantiating expr
> Module: Linked to module rlm_expiration
> Module: Instantiating expiration
> expiration {
> reply-message = "Password Has Expired "
> }
> Module: Linked to module rlm_logintime
> Module: Instantiating logintime
> logintime {
> reply-message = "You are calling outside your allowed timespan
> "
> minimum-timeout = 60
> }
> }
> radiusd: #### Loading Virtual Servers ####
> server dynamic_client_server {
> modules {
> Module: Checking authorize {...} for more modules to load
> Module: Linked to module rlm_always
> Module: Instantiating ok
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> } # modules
> } # server
> server inner-tunnel {
> modules {
> Module: Checking authenticate {...} for more modules to load
> Module: Linked to module rlm_pap
> Module: Instantiating pap
> pap {
> encryption_scheme = "auto"
> auto_header = no
> }
> Module: Linked to module rlm_chap
> Module: Instantiating chap
> Module: Linked to module rlm_mschap
> Module: Instantiating mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = no
> }
> Module: Linked to module rlm_unix
> Module: Instantiating unix
> unix {
> radwtmp = "/usr/local/var/log/radius/radwtmp"
> }
> Module: Linked to module rlm_eap
> Module: Instantiating eap
> eap {
> default_eap_type = "md5"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 4096
> }
> Module: Linked to sub-module rlm_eap_md5
> Module: Instantiating eap-md5
> Module: Linked to sub-module rlm_eap_leap
> Module: Instantiating eap-leap
> Module: Linked to sub-module rlm_eap_gtc
> Module: Instantiating eap-gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> Module: Linked to sub-module rlm_eap_tls
> Module: Instantiating eap-tls
> tls {
> rsa_key_exchange = no
> dh_key_exchange = yes
> rsa_key_length = 512
> dh_key_length = 512
> verify_depth = 0
> pem_file_type = yes
> private_key_file = "/usr/local/etc/raddb/certs/server.pem"
> certificate_file = "/usr/local/etc/raddb/certs/server.pem"
> CA_file = "/usr/local/etc/raddb/certs/ca.pem"
> private_key_password = "whatever"
> dh_file = "/usr/local/etc/raddb/certs/dh"
> random_file = "/usr/local/etc/raddb/certs/random"
> fragment_size = 1024
> include_length = yes
> check_crl = no
> cipher_list = "DEFAULT"
> make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> }
> Module: Linked to sub-module rlm_eap_ttls
> Module: Instantiating eap-ttls
> ttls {
> default_eap_type = "md5"
> copy_request_to_tunnel = yes
> use_tunneled_reply = yes
> virtual_server = "inner-tunnel"
> include_length = yes
> }
> Module: Linked to sub-module rlm_eap_peap
> Module: Instantiating eap-peap
> peap {
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> }
> Module: Linked to sub-module rlm_eap_mschapv2
> Module: Instantiating eap-mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> }
> Module: Checking authorize {...} for more modules to load
> Module: Linked to module rlm_realm
> Module: Instantiating suffix
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> Module: Linked to module rlm_files
> Module: Instantiating files
> files {
> usersfile = "/usr/local/etc/raddb/users"
> acctusersfile = "/usr/local/etc/raddb/acct_users"
> preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
> compat = "no"
> }
> Module: Linked to module rlm_sql
> Module: Instantiating sql
> sql {
> driver = "rlm_sql_mysql"
> server = "localhost"
> port = ""
> login = "root"
> password = "unl0ck"
> radius_db = "radius"
> read_groups = yes
> sqltrace = no
> sqltracefile = "/usr/local/var/log/radius/sqltrace.sql"
> readclients = no
> deletestalesessions = yes
> num_sql_socks = 5
> lifetime = 0
> max_queries = 0
> sql_user_name = "%{User-Name}"
> default_user_profile = ""
> nas_query = "SELECT id, nasname, shortname, type, secret,
> server
> FROM nas"
> authorize_check_query = "SELECT id, username, attribute, value,
> op FROM radcheck WHERE username = BINARY
> '%{SQL-User-Name}' ORDER BY id"
> authorize_reply_query = "SELECT id, username, attribute, value,
> op FROM radreply WHERE username = BINARY
> '%{SQL-User-Name}' ORDER BY id"
> authorize_group_check_query = "SELECT id, groupname,
> attribute, Value, op FROM radgroupcheck
> WHERE
> groupname = '%{Sql-Group}' ORDER BY id"
> authorize_group_reply_query = "SELECT id, groupname,
> attribute, value, op FROM radgroupreply
> WHERE
> groupname = '%{Sql-Group}' ORDER BY id"
> accounting_onoff_query = " UPDATE radacct
> SET acctstoptime = '%S',
> acctsessiontime
> = unix_timestamp('%S') -
> unix_timestamp(acctstarttime), acctterminatecause =
> '%{Acct-Terminate-Cause}', acctstopdelay =
> %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL
> AND
> nasipaddress = '%{NAS-IP-Address}' AND acctstarttime
> <=
> '%S'"
> accounting_update_query = " UPDATE radacct
> SET framedipaddress = '%{Framed-IP-Address}',
> acctsessiontime = '%{Acct-Session-Time}',
> acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32
> |
> '%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
> '%{%{Acct-Output-Gigawords}:-0}' << 32
> |
> '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid =
> '%{Acct-Session-Id}' AND username =
> '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
> accounting_update_query_alt = " INSERT INTO
> radacct (acctsessionid, acctuniqueid,
> username, realm, nasipaddress,
> nasportid, nasporttype, acctstarttime,
> acctsessiontime, acctauthentic, connectinfo_start,
> acctinputoctets, acctoutputoctets, calledstationid,
> callingstationid, servicetype, framedprotocol,
> framedipaddress, acctstartdelay,
> xascendsessionsvrkey) VALUES ('%{Acct-Session-
> Id}',
> '%{Acct-Unique-Session-Id}', '%{SQL-User-
> Name}',
> '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
> '%{NAS-Port-Type}', DATE_SUB('%S',
> INTERVAL (%{%{Acct-Session-Time}:-0} +
> %{%{Acct-Delay-Time}:-0}) SECOND),
> '%{Acct-Session-Time}', '%{Acct-Authentic}',
> '', '%{%{Acct-Input-Gigawords}:-0}' << 32 |
> '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-
> Gigawords}:-0}'
> << 32 | '%{%{Acct-Output-Octets}:-0}',
> '%{Called-Station-Id}', '%{Calling-Station-Id}',
> '%{Service-Type}', '%{Framed-Protocol}',
> '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-
> Key}')"
> accounting_start_query = " INSERT INTO
> radacct
> (acctsessionid, acctuniqueid, username,
> realm, nasipaddress, nasportid,
> nasporttype, acctstarttime, acctstoptime,
> acctsessiontime, acctauthentic, connectinfo_start,
> connectinfo_stop, acctinputoctets, acctoutputoctets,
> calledstationid, callingstationid, acctterminatecause,
> servicetype, framedprotocol, framedipaddress,
> acctstartdelay, acctstopdelay, xascendsessionsvrkey)
> VALUES ('%{Acct-Session-Id}',
> '%{Acct-Unique-Session-Id}', '%{SQL-User-
> Name}',
> '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
> '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}',
> '%{Connect-Info}', '', '0', '0',
> '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
> '%{Service-Type}', '%{Framed-Protocol}',
> '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0',
> '%{X-Ascend-Session-Svr-Key}')"
> accounting_start_query_alt = " UPDATE radacct
> SET acctstarttime = '%S',
> acctstartdelay =
> '%{%{Acct-Delay-Time}:-0}', connectinfo_start =
> '%{Connect-Info}' WHERE acctsessionid =
> '%{Acct-Session-Id}' AND username =
> '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-
> Address}'"
> accounting_stop_query = " UPDATE radacct
> SET
> acctstoptime = '%S', acctsessiontime =
> '%{Acct-Session-Time}', acctinputoctets =
> '%{%{Acct-Input-Gigawords}:-0}' << 32
> |
> '%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
> '%{%{Acct-Output-Gigawords}:-0}' << 32
> |
> '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> '%{Acct-Terminate-Cause}', acctstopdelay =
> '%{%{Acct-Delay-Time}:-0}', connectinfo_stop =
> '%{Connect-Info}' WHERE acctsessionid =
> '%{Acct-Session-Id}' AND username =
> '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-
> Address}'"
> accounting_stop_query_alt = " INSERT INTO
> radacct (acctsessionid, acctuniqueid,
> username,
> realm, nasipaddress, nasportid, nasporttype,
> acctstarttime,
> acctstoptime, acctsessiontime, acctauthentic,
> connectinfo_start, connectinfo_stop, acctinputoctets,
> acctoutputoctets, calledstationid, callingstationid,
> acctterminatecause, servicetype, framedprotocol,
> framedipaddress, acctstartdelay, acctstopdelay)
> VALUES ('%{Acct-Session-Id}',
> '%{Acct-Unique-Session-Id}', '%{SQL-User-
> Name}',
> '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
> '%{NAS-Port-Type}', DATE_SUB('%S',
> INTERVAL
> (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-
> 0})
> SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-
> Authentic}',
> '', '%{Connect-Info}',
> '%{%{Acct-Input-Gigawords}:-0}' << 32 |
> '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-
> Gigawords}:-0}'
> << 32 | '%{%{Acct-Output-Octets}:-0}',
> '%{Called-Station-Id}', '%{Calling-Station-Id}',
> '%{Acct-Terminate-Cause}', '%{Service-Type}',
> '%{Framed-Protocol}', '%{Framed-IP-Address}', '0',
> '%{%{Acct-Delay-Time}:-0}')"
> group_membership_query = "SELECT groupname FROM
> radusergroup WHERE username = BINARY '%{SQL-User-
> Name}'
> ORDER BY priority"
> connect_failure_retry_delay = 60
> simul_count_query = ""
> simul_verify_query = "SELECT radacctid, acctsessionid,
> username, nasipaddress, nasportid,
> framedipaddress, callingstationid,
> framedprotocol FROM radacct
> WHERE username =
> '%{SQL-User-Name}' AND acctstoptime IS
> NULL"
> postauth_query = "INSERT INTO
> radpostauth
> (username, pass, reply, authdate) VALUES
> ( '%{User-Name}',
> '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S')"
> safe-characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> }
> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> linked
> rlm_sql (sql): Attempting to connect to root at localhost:/radius
> rlm_sql (sql): starting 0
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
> rlm_sql_mysql: Starting connect to MySQL server for #0
> rlm_sql (sql): Connected new DB handle, #0
> rlm_sql (sql): starting 1
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
> rlm_sql_mysql: Starting connect to MySQL server for #1
> rlm_sql (sql): Connected new DB handle, #1
> rlm_sql (sql): starting 2
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
> rlm_sql_mysql: Starting connect to MySQL server for #2
> rlm_sql (sql): Connected new DB handle, #2
> rlm_sql (sql): starting 3
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
> rlm_sql_mysql: Starting connect to MySQL server for #3
> rlm_sql (sql): Connected new DB handle, #3
> rlm_sql (sql): starting 4
> rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
> rlm_sql_mysql: Starting connect to MySQL server for #4
> rlm_sql (sql): Connected new DB handle, #4
> Module: Checking session {...} for more modules to load
> Module: Checking post-proxy {...} for more modules to load
> Module: Checking post-auth {...} for more modules to load
> Module: Linked to module rlm_attr_filter
> Module: Instantiating attr_filter.access_reject
> attr_filter attr_filter.access_reject {
> attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
> key = "%{User-Name}"
> }
> } # modules
> } # server
> server {
> modules {
> Module: Checking authenticate {...} for more modules to load
> Module: Instantiating attr_filter.access_challenge
> attr_filter attr_filter.access_challenge {
> attrsfile = "/usr/local/etc/raddb/attrs.access_challenge"
> key = "%{User-Name}"
> }
> Module: Instantiating handled
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> Module: Checking authorize {...} for more modules to load
> Module: Linked to module rlm_preprocess
> Module: Instantiating preprocess
> preprocess {
> huntgroups = "/usr/local/etc/raddb/huntgroups"
> hints = "/usr/local/etc/raddb/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> Module: Linked to module rlm_wimax
> Module: Instantiating wimax
> wimax {
> delete_mppe_keys = yes
> }
> Module: Checking preacct {...} for more modules to load
> Module: Linked to module rlm_acct_unique
> Module: Instantiating acct_unique
> acct_unique {
> key = "User-Name, Acct-Session-Id, NAS-IP-Address,
> Client-IP-Address, NAS-Port"
> }
> Module: Checking accounting {...} for more modules to load
> Module: Linked to module rlm_radutmp
> Module: Instantiating radutmp
> radutmp {
> filename = "/usr/local/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> perm = 384
> callerid = yes
> }
> Module: Instantiating attr_filter.accounting_response
> attr_filter attr_filter.accounting_response {
> attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
> key = "%{User-Name}"
> }
> Module: Checking session {...} for more modules to load
> Module: Checking post-proxy {...} for more modules to load
> Module: Checking post-auth {...} for more modules to load
> } # modules
> } # server
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> }
> listen {
> type = "control"
> listen {
> socket = "/usr/local/var/run/radiusd/radiusd.sock"
> }
> }
> Listening on authentication address * port 1812
> Listening on accounting address * port 1813
> Listening on command file /usr/local/var/run/radiusd/radiusd.sock
> Listening on proxy address * port 1814
> Ready to process requests.
> rad_recv: Access-Request packet from host 192.168.60.50 port 49154,
> id=22,
> length=163
> server dynamic_client_server {
> rlm_sql (sql): Reserving sql socket id: 4
> rlm_sql (sql): Released sql socket id: 4
> rlm_sql (sql): Reserving sql socket id: 3
> rlm_sql (sql): Released sql socket id: 3
> rlm_sql (sql): Reserving sql socket id: 2
> rlm_sql (sql): Released sql socket id: 2
> rlm_sql (sql): Reserving sql socket id: 1
> rlm_sql (sql): Released sql socket id: 1
> } # server dynamic_client_server
> - Added client 192.168.60.50 with shared secret unl0ck
> rad_recv: Access-Request packet from host 192.168.60.50 port 49154,
> id=22,
> length=163
> User-Name = "KeepAliveUserNameAndPassword"
> NAS-IP-Address = 192.168.60.50
> NAS-Port-Type = 27
> NAS-Port = 0
> Calling-Station-Id = "\000\000\000\000\000"
> NAS-Identifier = "001001001000032000"
> WiMAX-GMT-Timezone-offset = 0
> Acct-Session-Id = "KeepAliveSessionId"
> User-Password = "KeepAliveUserNameAndPassword"
> +- entering group authorize {...}
> ++[preprocess] returns ok
> ++[mschap] returns noop
> rlm_wimax: Fixing WiMAX binary Calling-Station-Id to 00-00-00-00-00-00
> ++[wimax] returns ok
> [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking
> up
> realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] returns noop
> [eap] No EAP-Message, not doing EAP
> ++[eap] returns noop
> ++[files] returns noop
> [sql] expand: %{User-Name} -> KeepAliveUserNameAndPassword
> [sql] sql_set_user escaped user --> 'KeepAliveUserNameAndPassword'
> rlm_sql (sql): Reserving sql socket id: 0
> [sql] expand: SELECT id, username, attribute, value, op FROM
> radcheck WHERE username = BINARY '%{SQL-User-Name}'
> ORDER
> BY id -> SELECT id, username, attribute, value, op FROM
> radcheck WHERE username = BINARY
> 'KeepAliveUserNameAndPassword' ORDER BY id
> [sql] User found in radcheck table
> [sql] expand: SELECT id, username, attribute, value, op FROM
> radreply WHERE username = BINARY '%{SQL-User-Name}'
> ORDER
> BY id -> SELECT id, username, attribute, value, op FROM
> radreply WHERE username = BINARY
> 'KeepAliveUserNameAndPassword' ORDER BY id
> [sql] expand: SELECT groupname FROM radusergroup
> WHERE
> username = BINARY '%{SQL-User-Name}' ORDER BY priority ->
> SELECT
> groupname FROM radusergroup WHERE username = BINARY
> 'KeepAliveUserNameAndPassword' ORDER BY priority
> rlm_sql (sql): Released sql socket id: 0
> ++[sql] returns ok
> ++[expiration] returns noop
> ++[logintime] returns noop
> WARNING: Please update your configuration, and remove 'Auth-Type =
> Local'
> WARNING: Use the PAP or CHAP modules instead.
> User-Password in the request is correct.
> +- entering group post-auth {...}
> [sql] expand: %{User-Name} -> KeepAliveUserNameAndPassword
> [sql] sql_set_user escaped user --> 'KeepAliveUserNameAndPassword'
> [sql] expand: %{User-Password} -> KeepAliveUserNameAndPassword
> [sql] expand: INSERT INTO radpostauth
> (username,
> pass, reply, authdate) VALUES
> ( '%{User-Name}',
> '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S') -> INSERT INTO
> radpostauth (username, pass, reply,
> authdate) VALUES (
> 'KeepAliveUserNameAndPassword',
> 'KeepAliveUserNameAndPassword',
> 'Access-Accept', '2010-07-08 16:11:46')
> rlm_sql (sql) in sql_postauth: query is INSERT INTO
> radpostauth (username, pass, reply,
> authdate) VALUES (
> 'KeepAliveUserNameAndPassword',
> 'KeepAliveUserNameAndPassword', 'Access-
> Accept',
> '2010-07-08 16:11:46')
> rlm_sql (sql): Reserving sql socket id: 4
> rlm_sql (sql): Released sql socket id: 4
> ++[sql] returns ok
> ++[exec] returns noop
> expand: %{User-Name} -> KeepAliveUserNameAndPassword
> expand: %{EAP-MSK} ->
> ++[reply] returns noop
> [wimax] No EAP-MSK or EAP-EMSK. Cannot create WiMAX keys.
> ++[wimax] returns noop
> Sending Access-Accept of id 22 to 192.168.60.50 port 49154
> WiMAX-IP-Technology = CMIP4
> WiMAX-FA-RK-Key = 0x00
> WiMAX-MSK = 0x
> Finished request 0.
> Going to the next request
> Waking up in 4.9 seconds.
> rad_recv: Accounting-Request packet from host 192.168.60.50 port 49155,
> id=14, length=135
> User-Name = "KeepAliveUserNameAndPassword"
> NAS-IP-Address = 192.168.60.50
> NAS-Port-Type = 27
> NAS-Port = 0
> Calling-Station-Id = "\000\000\000\000\000"
> NAS-Identifier = "001001001000032000"
> WiMAX-GMT-Timezone-offset = 0
> Acct-Status-Type = Stop
> Acct-Session-Id = "KeepAliveSessionId"
> +- entering group preacct {...}
> ++[preprocess] returns ok
> expand: %{Acct-Session-Time} ->
> ... expanding second conditional
> expand: %{Acct-Delay-Time} ->
> ... expanding second conditional
> expand: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay-
> Time}:-0}
> -> 1278619906 - 0 - 0
> expand: %{expr: %l - %{%{Acct-Session-Time}:-0} -
> %{%{Acct-Delay-Time}:-0}} -> 1278619906
> ++[request] returns ok
> [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address =
> 192.168.60.50,NAS-IP-Address = 192.168.60.50,Acct-Session-Id =
> "KeepAliveSessionId",User-Name = "KeepAliveUserNameAndPassword"'
> [acct_unique] Acct-Unique-Session-ID = "3e3e3f7489ea6051".
> ++[acct_unique] returns ok
> [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking
> up
> realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] returns noop
> ++[files] returns noop
> +- entering group accounting {...}
> ++[unix] returns ok
> [radutmp] expand: /usr/local/var/log/radius/radutmp ->
> /usr/local/var/log/radius/radutmp
> [radutmp] expand: %{User-Name} -> KeepAliveUserNameAndPassword
> rlm_radutmp: Logout for NAS Extreme 5000 port 0, but no Login record
> ++[radutmp] returns ok
> [sql] expand: %{User-Name} -> KeepAliveUserNameAndPassword
> [sql] sql_set_user escaped user --> 'KeepAliveUserNameAndPassword'
> [sql] expand: %{Acct-Input-Gigawords} ->
> [sql] ... expanding second conditional
> [sql] expand: %{Acct-Input-Octets} ->
> [sql] ... expanding second conditional
> [sql] expand: %{Acct-Output-Gigawords} ->
> [sql] ... expanding second conditional
> [sql] expand: %{Acct-Output-Octets} ->
> [sql] ... expanding second conditional
> [sql] expand: %{Acct-Delay-Time} ->
> [sql] ... expanding second conditional
> [sql] expand: UPDATE radacct SET
> acctstoptime = '%S', acctsessiontime =
> '%{Acct-Session-Time}', acctinputoctets =
> '%{%{Acct-Input-Gigawords}:-0}' << 32
> |
> '%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
> '%{%{Acct-Output-Gigawords}:-0}' << 32
> |
> '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> '%{Acct-Terminate-Cause}', acctstopdelay =
> '%{%{Acct-Delay-Time}:-0}', connectinfo_stop =
> '%{Connect-Info}' WHERE acctsessionid =
> '%{Acct-Session-Id}' AND username =
> '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-
> Address}'
> -> UPDATE radacct SET acctstoptime =
> '2010-07-08 16:11:46', acctsessiontime =
> '',
> acctinputoctets = '0' << 32 |
> '0', acctoutputoctets = '0' << 32 |
> rlm_sql (sql): Reserving sql socket id: 3
> [sql] expand: stop packet with zero session length. [user '%{User-
> Name}',
> nas '%{NAS-IP-Address}'] -> stop packet with zero session length. [user
> 'KeepAliveUserNameAndPassword', nas '192.168.60.50']
> [sql] stop packet with zero session length. [user
> 'KeepAliveUserNameAndPassword', nas '192.168.60.50']
> rlm_sql (sql): Released sql socket id: 3
> ++[sql] returns noop
> ++? if (noop)
> ? Evaluating (noop) -> TRUE
> ++? if (noop) -> TRUE
> ++- entering if (noop) {...}
> +++[ok] returns ok
> ++- if (noop) returns ok
> [attr_filter.accounting_response] expand: %{User-Name} ->
> KeepAliveUserNameAndPassword
> attr_filter: Matched entry DEFAULT at line 12
> ++[attr_filter.accounting_response] returns updated
> Sending Accounting-Response of id 14 to 192.168.60.50 port 49155
> Finished request 1.
> Cleaning up request 1 ID 14 with timestamp +25
> Going to the next request
> Waking up in 4.9 seconds.
> Cleaning up request 0 ID 22 with timestamp +25
> Ready to process requests.
>
> David Peterson
>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list