i install freeradius successfully, but i can't telnet the port

[Spacelee]

what should i write in client.conf

mine is like this:
client fremont.iqwer.com {
    ipaddr = 173.233.234.52
    shortname = fremont
    secret = 19861230
    nastype = other
}

2010/6/8 Spacelee <fjctlzy at gmail.com>

> on the radius server, i type the two command , and get those results, the
> iptables has been shutdown
>
>
> radtest test test localhost 1812 19861230
> Sending Access-Request of id 124 to 127.0.0.1 port 1812
>  User-Name = "test"
> User-Password = "test"
> NAS-IP-Address = 127.0.0.1
>  NAS-Port = 1812
> rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=124,
> length=20
>
>
> radtest test test 173.224.212.50 1812 19861230
> Sending Access-Request of id 236 to 173.234.232.50 port 1812
> User-Name = "test"
>  User-Password = "test"
> NAS-IP-Address = 127.0.0.1
> NAS-Port = 1812
> Sending Access-Request of id 236 to 173.224.212.50 port 1812
> User-Name = "test"
> User-Password = "test"
>  NAS-IP-Address = 127.0.0.1
> NAS-Port = 1812
> Sending Access-Request of id 236 to 173.224.212.50 port 1812
>  User-Name = "test"
> User-Password = "test"
> NAS-IP-Address = 127.0.0.1
>  NAS-Port = 1812
> radclient: no response from server for ID 236 socket 3
>
>
> 2010/6/8 Spacelee <fjctlzy at gmail.com>
>
>> this is the file users' content
>> test Auth-Type:=MS-CHAP, User-Password:="test", Simultaneous-Use:=100
>>         Service-Type = Framed-User,
>>         Framed-Protocol = PPP,
>>         Framed-IP-Address = 255.255.255.254,
>>         Framed-IP-Netmask = 255.255.255.0
>>
>>
>>
>> 2010/6/8 Spacelee <fjctlzy at gmail.com>
>>
>> i use netstat and found there is radius listen on 1812, 1813 and 1814
>>> using udp
>>> i shut down all the iptables both on the server of pptp and the server
>>> radius
>>>
>>> but the pptp can't be authenticated , the log is
>>>
>>> RADIUS plugin initialized.
>>> Jun  8 15:26:29 mountainview pppd[4604]: Plugin
>>> /usr/lib64/pppd/2.4.4/radattr.so loaded.
>>> Jun  8 15:26:29 mountainview pppd[4604]: RADATTR plugin initialized.
>>> Jun  8 15:26:29 mountainview pppd[4604]: Plugin
>>> /usr/lib64/pptpd/pptpd-logwtmp.so loaded.
>>> Jun  8 15:26:29 mountainview pppd[4604]: pptpd-logwtmp: $Version$
>>> Jun  8 15:26:29 mountainview pppd[4604]: pppd 2.4.4 started by root, uid
>>> 0
>>> Jun  8 15:26:29 mountainview pppd[4604]: Using interface ppp0
>>> Jun  8 15:26:29 mountainview pppd[4604]: Connect: ppp0 <--> /dev/pts/1
>>> Jun  8 15:27:03 mountainview pppd[4604]: rc_send_server: no reply from
>>> RADIUS server puppet:1812
>>> Jun  8 15:27:03 mountainview pppd[4604]: Peer test failed CHAP
>>> authentication
>>> Jun  8 15:27:03 mountainview pppd[4604]: Connection terminated.
>>> Jun  8 15:27:03 mountainview pppd[4604]: Exit.
>>>
>>>
>>> it says there is not reply
>>>
>>> 2010/6/8 Alan Buxey <A.L.M.Buxey at lboro.ac.uk>
>>>
>>> Hi,
>>>> > i can start freeradius ok, but my pptp can't remote access radius
>>>> server, I telnet 1812 or 1813 , but both are connection refused, i don't
>>>> know what to do with this situation
>>>>
>>>> firewall eg iptables , on the server you put freeradius on?
>>>>
>>>> alan
>>>> -
>>>> List info/subscribe/unsubscribe? See
>>>> http://www.freeradius.org/list/users.html
>>>>
>>>
>>>
>>>
>>> --
>>> Spacelee
>>>
>>
>>
>>
>> --
>> Spacelee
>>
>
>
>
> --
> Spacelee
>



-- 
Spacelee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20100608/1fbd7e6e/attachment.html>