i install freeradius successfully, but i can't telnet the port

[Spacelee]

i use radius -X to see the log, it looks like:

Ignoring request to authentication address * port 1812 from unknown client
123.116.121.228 port 56627
Ready to process requests.
Ignoring request to authentication address * port 1812 from unknown client
123.116.121.228 port 56627
Ready to process requests.


2010/6/8 Spacelee <fjctlzy at gmail.com>

> what should i write in client.conf
>
> mine is like this:
> client fremont.iqwer.com {
>     ipaddr = 173.233.234.52
>     shortname = fremont
>     secret = 19861230
>     nastype = other
> }
>
> 2010/6/8 Spacelee <fjctlzy at gmail.com>
>
>> on the radius server, i type the two command , and get those results, the
>> iptables has been shutdown
>>
>>
>> radtest test test localhost 1812 19861230
>> Sending Access-Request of id 124 to 127.0.0.1 port 1812
>>  User-Name = "test"
>> User-Password = "test"
>> NAS-IP-Address = 127.0.0.1
>>  NAS-Port = 1812
>> rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=124,
>> length=20
>>
>>
>> radtest test test 173.224.212.50 1812 19861230
>> Sending Access-Request of id 236 to 173.234.232.50 port 1812
>> User-Name = "test"
>>  User-Password = "test"
>> NAS-IP-Address = 127.0.0.1
>> NAS-Port = 1812
>> Sending Access-Request of id 236 to 173.224.212.50 port 1812
>> User-Name = "test"
>> User-Password = "test"
>>  NAS-IP-Address = 127.0.0.1
>> NAS-Port = 1812
>> Sending Access-Request of id 236 to 173.224.212.50 port 1812
>>  User-Name = "test"
>> User-Password = "test"
>> NAS-IP-Address = 127.0.0.1
>>  NAS-Port = 1812
>> radclient: no response from server for ID 236 socket 3
>>
>>
>> 2010/6/8 Spacelee <fjctlzy at gmail.com>
>>
>>> this is the file users' content
>>> test Auth-Type:=MS-CHAP, User-Password:="test", Simultaneous-Use:=100
>>>         Service-Type = Framed-User,
>>>         Framed-Protocol = PPP,
>>>         Framed-IP-Address = 255.255.255.254,
>>>         Framed-IP-Netmask = 255.255.255.0
>>>
>>>
>>>
>>> 2010/6/8 Spacelee <fjctlzy at gmail.com>
>>>
>>> i use netstat and found there is radius listen on 1812, 1813 and 1814
>>>> using udp
>>>> i shut down all the iptables both on the server of pptp and the server
>>>> radius
>>>>
>>>> but the pptp can't be authenticated , the log is
>>>>
>>>> RADIUS plugin initialized.
>>>> Jun  8 15:26:29 mountainview pppd[4604]: Plugin
>>>> /usr/lib64/pppd/2.4.4/radattr.so loaded.
>>>> Jun  8 15:26:29 mountainview pppd[4604]: RADATTR plugin initialized.
>>>> Jun  8 15:26:29 mountainview pppd[4604]: Plugin
>>>> /usr/lib64/pptpd/pptpd-logwtmp.so loaded.
>>>> Jun  8 15:26:29 mountainview pppd[4604]: pptpd-logwtmp: $Version$
>>>> Jun  8 15:26:29 mountainview pppd[4604]: pppd 2.4.4 started by root, uid
>>>> 0
>>>> Jun  8 15:26:29 mountainview pppd[4604]: Using interface ppp0
>>>> Jun  8 15:26:29 mountainview pppd[4604]: Connect: ppp0 <--> /dev/pts/1
>>>> Jun  8 15:27:03 mountainview pppd[4604]: rc_send_server: no reply from
>>>> RADIUS server puppet:1812
>>>> Jun  8 15:27:03 mountainview pppd[4604]: Peer test failed CHAP
>>>> authentication
>>>> Jun  8 15:27:03 mountainview pppd[4604]: Connection terminated.
>>>> Jun  8 15:27:03 mountainview pppd[4604]: Exit.
>>>>
>>>>
>>>> it says there is not reply
>>>>
>>>> 2010/6/8 Alan Buxey <A.L.M.Buxey at lboro.ac.uk>
>>>>
>>>> Hi,
>>>>> > i can start freeradius ok, but my pptp can't remote access radius
>>>>> server, I telnet 1812 or 1813 , but both are connection refused, i don't
>>>>> know what to do with this situation
>>>>>
>>>>> firewall eg iptables , on the server you put freeradius on?
>>>>>
>>>>> alan
>>>>> -
>>>>> List info/subscribe/unsubscribe? See
>>>>> http://www.freeradius.org/list/users.html
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Spacelee
>>>>
>>>
>>>
>>>
>>> --
>>> Spacelee
>>>
>>
>>
>>
>> --
>> Spacelee
>>
>
>
>
> --
> Spacelee
>



-- 
Spacelee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20100608/5714a618/attachment.html>