Invalid Attributes
Ben Wiechman
wiechman.lists at gmail.com
Mon Jun 28 23:56:28 CEST 2010
The dictionary that is displayed by Wichorus in their documentation is for
their own internal MIG product and the syntax has been modified from that
typically used by FreeRADIUS.
Wichorus uses a mix of attributes from NWG release 1.2, 1.3, and beyond.
Attached is a sample WiMAX dictionary that we have been using with our
Wichorus gateway. It isn't 100% complete, but should support basic
functionality and be able to process the WiMAX Capabilities TLV
modifications that Wichorus currently uses. Note that these differ from the
NWG 1.5 release from which most of them were pulled in several ways which
are documented in the dictionary.
I would recommend NOT replacing the default WiMAX dictionary included with
FreeRADIUS. Install this alongside it and see the comments in
/etc/raddb/dictionary about configuring custom dictionaries.
Ben
> -----Original Message-----
> From: freeradius-users-
> bounces+wiechman.lists=gmail.com at lists.freeradius.org
> [mailto:freeradius-users-
> bounces+wiechman.lists=gmail.com at lists.freeradius.org] On Behalf Of
> Moayad Mohammad
> Sent: Monday, June 21, 2010 8:24 AM
> To: freeradius-users at lists.freeradius.org
> Subject: Re: Re: Invalid Attributes
>
>
> Thanks for your response, I want to upload new dictionary for wichrous
> system, because wichorus has their own standard dictionary and wimax
> dictionary doesn't work with wichorus ASN-GW
>
> Regards,
>
> -----Original Message-----
> From:
> freeradius-users-bounces+mmohammad=thebluezone.com at lists.freeradius.org
> [mailto:freeradius-users-
> bounces+mmohammad=thebluezone.com at lists.freeradius.
> org] On Behalf Of freeradius-users-request at lists.freeradius.org
> Sent: Monday, June 21, 2010 3:42 PM
> To: freeradius-users at lists.freeradius.org
> Subject: Freeradius-Users Digest, Vol 62, Issue 87
>
> Send Freeradius-Users mailing list submissions to
> freeradius-users at lists.freeradius.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.freeradius.org/mailman/listinfo/freeradius-users
> or, via email, send a message with subject or body 'help' to
> freeradius-users-request at lists.freeradius.org
>
> You can reach the person managing the list at
> freeradius-users-owner at lists.freeradius.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Freeradius-Users digest..."
>
>
> Today's Topics:
>
> 1. Invalid Attributes (Moayad Mohammad)
> 2. Re: Invalid Attributes (Alan DeKok)
> 3. Re: checkval and != op (Alan DeKok)
> 4. Re: checkval and != op (Christian Zoffoli)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 21 Jun 2010 14:35:13 +0300
> From: "Moayad Mohammad" <mmohammad at thebluezone.com>
> Subject: Invalid Attributes
> To: <freeradius-users at lists.freeradius.org>
> Message-ID: <006b01cb1135$d228f6f0$767ae4d0$@com>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi to all,
>
> I have to add wichorus dictionary for WiMAX, but in
> this
> dictionary some attributes are invalid to freeradius.
>
> for example: parent_attr and subtype values.
>
>
>
> In the below sample of the dictionary:
>
> VENDOR Wimax 24757
>
> BEGIN-VENDOR Wimax
>
> ATTRIBUTE Wimax-Capability 1 octets
>
> ATTRIBUTE Wimax-Capability-Release 1 string parent_attr=Wimax-
> Capability
> subtype=1
>
> ATTRIBUTE Wimax-Capability-Accounting 1 octets
> parent_attr=Wimax-Capability subtype=2
>
> ATTRIBUTE Wimax-Capability-Hotlining 1 octets parent_attr=Wimax-
> Capability
> subtype=3
>
> ATTRIBUTE Wimax-Capability-Idle-Mode-Notification 1 octets
> parent_attr=Wimax-Capability subtype=4
>
>
>
> What I should to do?
>
>
>
>
>
> Regards,
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <https://lists.freeradius.org/pipermail/freeradius-
> users/attachments/2010062
> 1/22722f74/attachment.html>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 21 Jun 2010 13:46:05 +0200
> From: Alan DeKok <aland at deployingradius.com>
> Subject: Re: Invalid Attributes
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Message-ID: <4C1F50FD.4000606 at deployingradius.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Moayad Mohammad wrote:
> > I have to add wichorus dictionary for WiMAX, but in
> this
> > dictionary some attributes are invalid to freeradius.
> >
> > for example: parent_attr and subtype values.
>
> Yes... those are not part of FreeRADIUS.
>
> > What I should to do?
>
> Read the documentation for how dictionaries are formatted, and create
> the dictionary using the correct format.
>
> Or, *read the dictionary that is included with FreeRADIUS*.
>
> The server ships with a WiMAX dictionary. It's beyond me why you're
> trying to replace it with one from another vendor.
>
> Alan DeKok.
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 21 Jun 2010 13:50:08 +0200
> From: Alan DeKok <aland at deployingradius.com>
> Subject: Re: checkval and != op
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Message-ID: <4C1F51F0.6020900 at deployingradius.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Christian Zoffoli wrote:
> > mysql> SELECT * FROM radcheck WHERE username='bumlwdgx';
> ...
> > mysql> SELECT * FROM radusergroup WHERE username='bumlwdgx';
>
> <sigh> You asked about radgroupcheck. Why post this?
>
> > SELECT * FROM radgroupcheck WHERE groupname='wireless';
> > +----+-----------+--------------------+----+-------------------+
> > | id | groupname | attribute | op | value |
> > +----+-----------+--------------------+----+-------------------+
> > | 18 | wireless | Calling-Station-Id | != | 00-22-15-16-35-B0 |
>
> Which is OK, and should work.
>
>
> > rad_recv: Access-Request packet from host 127.0.0.1 port 34220, id=1,
> > length=298
> > ChilliSpot-Version = "1.2.2"
> > User-Name = "bumlwdgx"
> > CHAP-Challenge = 0x777d7fc0c28a480f750e1f5506c3ccd7
> > CHAP-Password = 0x008617e203333f1fc66b2cacc4cbbe2255
> > NAS-IP-Address = 192.168.182.1
> > Service-Type = Login-User
> > Framed-IP-Address = 192.168.182.2
> > Calling-Station-Id = "00-22-15-16-35-B0"
>
> Which shouldn't match the entry in radgroupcheck.
>
> > expand: SELECT id, groupname, attribute, Value, op
> > FROM radgroupcheck WHERE groupname = '%{Sql-Group}'
> > ORDER BY id -> SELECT id, groupname, attribute, Value, op
> > FROM radgroupcheck WHERE groupname = 'wireless'
> > ORDER BY id
> > rlm_sql (sql): Released sql socket id: 0
>
> Which doesn't match, as expected.
>
> > ++[sql] returns ok
> > rlm_checkval: Item Name: Calling-Station-Id, Value: 00-22-15-16-35-B0
> > rlm_checkval: Could not find attribute named Calling-Station-Id in
> check
> > pairs
>
> Of *course* this doesn't work. You didn't add a Calling-Station-Id
> to
> the check pairs.
>
> I told you that the behavior of rlm_sql was documented. Go read that
> documentation. *Nothing* in it suggests that using "!=" as a check
> operator will result in the Calling-Station-Id attribute being added to
> the check pairs.
>
> > in radiusd.conf I have:
> >
> > checkval {
> > item-name = Calling-Station-Id
> > check-name = Calling-Station-Id
> > data-type = string
> > }
>
> Why? What possible use is this? What do you expect it to do?
>
> Alan DeKok.
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 21 Jun 2010 14:41:58 +0200
> From: Christian Zoffoli <czoffoli at xmerlin.org>
> Subject: Re: checkval and != op
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Message-ID: <4C1F5E16.6080501 at xmerlin.org>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Il 21/06/2010 13:50, Alan DeKok ha scritto:
> [cut]
> > Why? What possible use is this? What do you expect it to do?
>
> there is something strange IMHO
>
>
> if I try a different user in the wired group and this radgroupcheck:
>
> mysql> SELECT * FROM radgroupcheck WHERE groupname='wired';
> +----+-----------+--------------------+----+-------------------+
> | id | groupname | attribute | op | value |
> +----+-----------+--------------------+----+-------------------+
> | 6 | wired | Calling-Station-Id | := | 00-22-15-16-35-B0 |
> | 7 | wired | Simultaneous-Use | := | 1 |
> | 10 | wired | Max-All-Session | := | 3600 |
> | 12 | wired | Access-Period | := | 604800 |
> +----+-----------+--------------------+----+-------------------+
> 4 rows in set (0.00 sec)
>
>
> All works as expected. The software is the same, the machine is the
> same
> but now rlm_checkval works
>
>
> ---
> rad_recv: Access-Request packet from host 127.0.0.1 port 51146, id=1,
> length=298
> ChilliSpot-Version = "1.2.2"
> User-Name = "m7dby5cc"
> CHAP-Challenge = 0x0c8e9cdfd1f76caa475d8120e0af8660
> CHAP-Password = 0x00d4c0245b2a9b2a0429c5c3401da5439e
> NAS-IP-Address = 192.168.182.1
> Service-Type = Login-User
> Framed-IP-Address = 192.168.182.2
> Calling-Station-Id = "00-22-15-16-35-B0"
> Called-Station-Id = "00-0D-B9-15-F4-C9"
> NAS-Identifier = "localhost"
> Acct-Session-Id = "4c1f311000000001"
> NAS-Port-Type = Wireless-802.11
> NAS-Port = 1
> WISPr-Location-ID = "isocc=,cc=,ac=,network=XTekLABS,"
> WISPr-Location-Name = "HotSpot_Service"
> WISPr-Logoff-URL = "http://192.168.182.1:3990/logoff"
> Message-Authenticator = 0x7d095fb7ce6c28a7459e053a4074bf17
> +- entering group authorize
> ++[preprocess] returns ok
> rlm_realm: No '@' in User-Name = "m7dby5cc", looking up realm NULL
> rlm_realm: No such realm "NULL"
> ++[suffix] returns noop
> expand: %{Stripped-User-Name} ->
> expand: %{User-Name} -> m7dby5cc
> expand: %{%{User-Name}:-DEFAULT} -> m7dby5cc
> expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} ->
> m7dby5cc
> rlm_sql (sql): sql_set_user escaped user --> 'm7dby5cc'
> rlm_sql (sql): Reserving sql socket id: 0
> expand: SELECT id, username, attribute, value, op FROM
> radcheck WHERE username = '%{SQL-User-Name}' ORDER
> BY id -> SELECT id, username, attribute, value, op FROM
> radcheck WHERE username = 'm7dby5cc' ORDER BY id
> rlm_sql (sql): User found in radcheck table
> expand: SELECT id, username, attribute, value, op FROM
> radreply WHERE username = '%{SQL-User-Name}' ORDER
> BY id -> SELECT id, username, attribute, value, op FROM
> radreply WHERE username = 'm7dby5cc' ORDER BY id
> expand: SELECT groupname FROM radusergroup
> WHERE
> username = '%{SQL-User-Name}' ORDER BY priority -> SELECT
> groupname FROM radusergroup WHERE username =
> 'm7dby5cc' ORDER BY priority
> expand: SELECT id, groupname, attribute, Value, op
> FROM radgroupcheck WHERE groupname = '%{Sql-Group}'
> ORDER BY id -> SELECT id, groupname, attribute, Value, op
> FROM radgroupcheck WHERE groupname = 'wired'
> ORDER BY id
> rlm_sql (sql): User found in group wired
> expand: SELECT id, groupname, attribute, value, op
> FROM radgroupreply WHERE groupname = '%{Sql-Group}'
> ORDER BY id -> SELECT id, groupname, attribute, value, op
> FROM radgroupreply WHERE groupname = 'wired'
> ORDER BY id
> rlm_sql (sql): Released sql socket id: 0
> ++[sql] returns ok
> rlm_checkval: Item Name: Calling-Station-Id, Value: 00-22-15-16-35-B0
> rlm_checkval: Value Name: Calling-Station-Id, Value: 00-22-15-16-35-B0
> ++[checkval] returns ok
> rlm_expiration: Checking Expiration time: '18 Dec 2010 11:06:25'
> ++[expiration] returns ok
> rlm_sqlcounter: Entering module authorize code
> sqlcounter_expand: 'SELECT SUM(AcctSessionTime) FROM radacct WHERE
> UserName='%{User-Name}''
> expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE
> UserName='%{User-Name}' -> SELECT SUM(AcctSessionTime) FROM radacct
> WHERE UserName='m7dby5cc'
> sqlcounter_expand: '%{sql:SELECT SUM(AcctSessionTime) FROM radacct
> WHERE UserName='m7dby5cc'}'
> rlm_sql (sql): - sql_xlat
> expand: %{Stripped-User-Name} ->
> expand: %{User-Name} -> m7dby5cc
> expand: %{%{User-Name}:-DEFAULT} -> m7dby5cc
> expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} ->
> m7dby5cc
> rlm_sql (sql): sql_set_user escaped user --> 'm7dby5cc'
> expand: SELECT SUM(AcctSessionTime) FROM radacct WHERE
> UserName='m7dby5cc' -> SELECT SUM(AcctSessionTime) FROM radacct WHERE
> UserName='m7dby5cc'
> rlm_sql (sql): Reserving sql socket id: 4
> rlm_sql (sql): row[0] returned NULL
> rlm_sql (sql): Released sql socket id: 4
> expand: %{sql:SELECT SUM(AcctSessionTime) FROM radacct WHERE
> UserName='m7dby5cc'} ->
> rlm_sqlcounter: No integer found in string ""
> ++[noresetcounter] returns noop
> rlm_sqlcounter: Entering module authorize code
> sqlcounter_expand: 'SELECT UNIX_TIMESTAMP() -
> UNIX_TIMESTAMP(AcctStartTime) FROM radacct WHERE UserName =
> '%{User-Name}' ORDER BY AcctStartTime LIMIT 1'
> expand: SELECT UNIX_TIMESTAMP() - UNIX_TIMESTAMP(AcctStartTime)
> FROM
> radacct WHERE UserName = '%{User-Name}' ORDER BY AcctStartTime LIMIT 1
> -> SELECT UNIX_TIMESTAMP() - UNIX_TIMESTAMP(AcctStartTime) FROM radacct
> WHERE UserName = 'm7dby5cc' ORDER BY AcctStartTime LIMIT 1
> sqlcounter_expand: '%{sql:SELECT UNIX_TIMESTAMP() -
> UNIX_TIMESTAMP(AcctStartTime) FROM radacct WHERE UserName = 'm7dby5cc'
> ORDER BY AcctStartTime LIMIT 1}'
> rlm_sql (sql): - sql_xlat
> expand: %{Stripped-User-Name} ->
> expand: %{User-Name} -> m7dby5cc
> expand: %{%{User-Name}:-DEFAULT} -> m7dby5cc
> expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} ->
> m7dby5cc
> rlm_sql (sql): sql_set_user escaped user --> 'm7dby5cc'
> expand: SELECT UNIX_TIMESTAMP() - UNIX_TIMESTAMP(AcctStartTime)
> FROM
> radacct WHERE UserName = 'm7dby5cc' ORDER BY AcctStartTime LIMIT 1 ->
> SELECT UNIX_TIMESTAMP() - UNIX_TIMESTAMP(AcctStartTime) FROM radacct
> WHERE UserName = 'm7dby5cc' ORDER BY AcctStartTime LIMIT 1
> rlm_sql (sql): Reserving sql socket id: 3
> rlm_sql (sql): SQL query did not return any results
> rlm_sql (sql): Released sql socket id: 3
> expand: %{sql:SELECT UNIX_TIMESTAMP() -
> UNIX_TIMESTAMP(AcctStartTime)
> FROM radacct WHERE UserName = 'm7dby5cc' ORDER BY AcctStartTime LIMIT
> 1} ->
> rlm_sqlcounter: No integer found in string ""
> ++[accessperiod] returns noop
> auth: type Local
> auth: user supplied CHAP-Password matches local User-Password
> +- entering group session
> expand: %{Stripped-User-Name} ->
> expand: %{User-Name} -> m7dby5cc
> expand: %{%{User-Name}:-DEFAULT} -> m7dby5cc
> expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} ->
> m7dby5cc
> rlm_sql (sql): sql_set_user escaped user --> 'm7dby5cc'
> expand: SELECT COUNT(*) FROM radacct
> WHERE username =
> '%{SQL-User-Name}' AND acctstoptime is NULL ->
> SELECT COUNT(*)
> FROM radacct WHERE username = 'm7dby5cc'
> AND acctstoptime is NULL
> rlm_sql (sql): Reserving sql socket id: 2
> rlm_sql (sql): Released sql socket id: 2
> ++[sql] returns ok
> Login OK: [m7dby5cc/<CHAP-Password>] (from client localhost port 1 cli
> 00-22-15-16-35-B0)
> +- entering group post-auth
> rlm_sql (sql): Processing sql_postauth
> expand: %{Stripped-User-Name} ->
> expand: %{User-Name} -> m7dby5cc
> expand: %{%{User-Name}:-DEFAULT} -> m7dby5cc
> expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} ->
> m7dby5cc
> rlm_sql (sql): sql_set_user escaped user --> 'm7dby5cc'
> expand: %{User-Password} ->
> expand: %{Chap-Password} -> 0x00d4c0245b2a9b2a0429c5c3401da5439e
> expand: INSERT INTO radpostauth
> (username,
> pass, reply, authdate) VALUES (
> '%{User-Name}',
> '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth
> (username, pass, reply, authdate)
> VALUES ( 'm7dby5cc',
> '0x00d4c0245b2a9b2a0429c5c3401da5439e',
> 'Access-Accept', '2010-06-21 14:36:34')
> rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth
> (username, pass, reply, authdate)
> VALUES ( 'm7dby5cc',
> '0x00d4c0245b2a9b2a0429c5c3401da5439e',
> 'Access-Accept', '2010-06-21 14:36:34')
> rlm_sql (sql): Reserving sql socket id: 1
> rlm_sql (sql): Released sql socket id: 1
> ++[sql] returns ok
> ++[exec] returns noop
> Sending Access-Accept of id 1 to 127.0.0.1 port 51146
> Acct-Interim-Interval := 600
> Session-Timeout = 15542991
> Finished request 14.
> Going to the next request
> Waking up in 4.9 seconds.
> rad_recv: Accounting-Request packet from host 127.0.0.1 port 60147,
> id=11, length=225
> ChilliSpot-Version = "1.2.2"
> ChilliSpot-Attr-10 = 0x00000002
> Acct-Status-Type = Start
> User-Name = "m7dby5cc"
> Calling-Station-Id = "00-22-15-16-35-B0"
> NAS-Port-Type = Wireless-802.11
> NAS-Port = 1
> NAS-Port-Id = "00000001"
> Framed-IP-Address = 192.168.182.2
> Acct-Session-Id = "4c1f311000000001"
> NAS-IP-Address = 192.168.182.1
> Called-Station-Id = "00-0D-B9-15-F4-C9"
> NAS-Identifier = "localhost"
> WISPr-Location-ID = "isocc=,cc=,ac=,network=XTekLABS,"
> WISPr-Location-Name = "HotSpot_Service"
> +- entering group preacct
> ++[preprocess] returns ok
> rlm_acct_unique: Hashing 'NAS-Port = 1,Client-IP-Address =
> 127.0.0.1,NAS-IP-Address = 192.168.182.1,Acct-Session-Id =
> "4c1f311000000001",User-Name = "m7dby5cc"'
> rlm_acct_unique: Acct-Unique-Session-ID = "ddca1f9d2efffb89".
> ++[acct_unique] returns ok
> rlm_realm: No '@' in User-Name = "m7dby5cc", looking up realm NULL
> rlm_realm: No such realm "NULL"
> ++[suffix] returns noop
> ++[files] returns noop
> +- entering group accounting
> expand:
> /var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d
> -> /var/log/freeradius/radacct/127.0.0.1/detail-20100621
> rlm_detail:
> /var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands
> to /var/log/freeradius/radacct/127.0.0.1/detail-20100621
> expand: %t -> Mon Jun 21 14:36:35 2010
> ++[detail] returns ok
> expand: %{Stripped-User-Name} ->
> expand: %{User-Name} -> m7dby5cc
> expand: %{%{User-Name}:-DEFAULT} -> m7dby5cc
> expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} ->
> m7dby5cc
> rlm_sql (sql): sql_set_user escaped user --> 'm7dby5cc'
> expand: %{Acct-Delay-Time} ->
> expand: INSERT INTO radacct
> (acctsessionid,
> acctuniqueid, username, realm,
> nasipaddress,
> nasportid, nasporttype, acctstarttime,
> acctstoptime, acctsessiontime, acctauthentic,
> connectinfo_start, connectinfo_stop, acctinputoctets,
> acctoutputoctets, calledstationid, callingstationid,
> acctterminatecause, servicetype, framedprotocol,
> framedipaddress, acctstartdelay, acctstopdelay,
> xascendsessionsvrkey) VALUES
> ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
> '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
> '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL,
> '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0',
> '0',
> '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
> '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
> '%{%{Acct-Delay-Time}:-0}', '0',
> '%{X-Ascend-Session-Svr-Key}') -> INSERT INTO radacct
> (acctsessionid, acctuniqueid, username, realm,
> nasipaddress, nasportid, nasporttype,
> acctstarttime, acctstoptime, acctsessiontime,
> acctauthentic, connectinfo_start, connectinfo_stop,
> acctinputoctets, acctoutputoctets, calledstationid,
> callingstationid, acctterminatecause, servicetype,
> framedprotocol, framedipaddress, acctstartdelay,
> acctstopdelay, xascendsessionsvrkey) VALUES
> ('4c1f311000000001', 'ddca1f9d2efffb89', 'm7dby5cc',
> '', '192.168.182.1', '1', 'Wireless-802.11',
> '2010-06-21 14:36:35', NULL, '0', '', '', '',
> '0', '0', '00-0D-B9-15-F4-C9', '00-22-15-16-35-B0', '',
> '', '', '192.168.182.2', '0', '0', '')
> rlm_sql (sql): Reserving sql socket id: 0
> rlm_sql (sql): Released sql socket id: 0
> ++[sql] returns ok
> expand: %{User-Name} -> m7dby5cc
> attr_filter: Matched entry DEFAULT at line 12
> ++[attr_filter.accounting_response] returns updated
> Sending Accounting-Response of id 11 to 127.0.0.1 port 60147
> Finished request 15.
> Cleaning up request 15 ID 11 with timestamp +12417
> Going to the next request
> Waking up in 4.9 seconds.
> ---
>
> Best regards,
> Christian
>
>
> ------------------------------
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>
> End of Freeradius-Users Digest, Vol 62, Issue 87
> ************************************************
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dictionary.wimax.wichorus
Type: application/octet-stream
Size: 17451 bytes
Desc: not available
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20100628/d478faba/attachment.obj>
More information about the Freeradius-Users
mailing list