WiMax VSA Support

[David Peterson]

Anup,

You have to configure the radius server to use the inner-tunnel.  Which
version of the 4-Motion software are you using on your system?

David


-----Original Message-----
From:
freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradius.org
[mailto:freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradiu
s.org] On Behalf Of Anup krishnan A
Sent: Wednesday, October 06, 2010 4:11 AM
To: FreeRadius users mailing list
Subject: Re: WiMax VSA Support


Hi Alan,

Thank you for your quick response.

We have already checked the dictionary and found that wimax dictionary is
available in the freeradius server.

Actually we are using Freeradius server 2.1.9 and Alvarion base-station and
Alvarion ASN GW. Initially we created a service profile in Alvarion ASN GW
for the user "test" using their management software 'AlvariStar'.
And 'users' file in the freeradius has been updated to add the user "test"
as follows,

test Cleartext-Password := "test"
 	Auth-Type = Local,
	Service-Type = Framed-User,
	Framed-Protocol = PPP,
	Framed-IP-Address = 192.168.0.33,
	Framed-IP-Netmask = 255.255.255.0,
	Framed-Routing = Broadcast-Listen,
	Filter-Id = "servprof2"

where "servprof2" is the name of the service profile created in Alvarion ASN
GW. In this case the authentication was successful and MS has got the IP as
well.

Then we tried to create the service profile for the user "test" from the
Freeradius by using WiMAX attributes found in the file dictionary.wimax'.The
entries for the user in the 'users' file is as shown below.

test Cleartext-Password := "test"
 	Auth-Type = Local,
	Service-Type = Framed-User,
	Framed-Protocol = PPP,
	Framed-IP-Address = 192.168.0.33,
	Framed-IP-Netmask = 255.255.255.0,
	WiMAX-Service-Profile-Id=1,
	WiMAX-Media-Flow-Type=Streaming-Video,
	WiMAX-Schedule-Type = Best-Effort,
	WiMAX-QoS-Id=01,
	WiMAX-Media-Flow-Type=Robust-Browser,
	WiMAX-Traffic-Priority=0,
	WiMAX-Maximum-Sustained-Traffic-Rate=512000

In this case Freeradius has sent the Access-Accept, but the authentication
process is not successful and MS is showing an error message as "EAP
supplicant transferring error".

I hope you understand the problem

Regards,
Anup



> Anup wrote:
>> Hi,
>> I would like to know whether latest Freeradius version has the 
>> support for WiMax VSAs?
>
>   The server comes with documentation and dictionary files.  Please 
> read them.
>
>> Also please tell me how to send the WiMAX Qos Descriptors in 
>> Access-Accept
>
>   VSAs are just attributes.  They can be added / edited like anything 
> else.
>
>   Alan DeKok.
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>



-----------------------------------------
This email was sent using SquirrelMail.
   "Webmail for nuts!"
http://squirrelmail.org/


______________________________________
Scanned and protected by Email scanner
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html