WiMax VSA Support

[Anup krishnan A]

Hi David,

1)  You have to configure the radius server to use the inner-tunnel.

	Following are the entries in the eap.conf file.
	ttls {
		default_eap_type = md5
		copy_request_to_tunnel = yes
		use_tunneled_reply = yes
		virtual_server = "inner-tunnel"
	}

I hope this is what you meant by configure inner-tunnel in radius server.

Actually, the FreeRadius server is sending the Access-Accept with all WiMAX
Attributes for the user as we have given in the "users" file.
But  I think the Alvarion ASN Gateway is not handling or recognizing what we
are sending

2) Which version of the 4-Motion software are you using on your system?
	We are using 4motion Release 2.5M1.


Regards
Anup


> Anup,
>
> You have to configure the radius server to use the inner-tunnel.  Which
> version of the 4-Motion software are you using on your system?
>
> David
>
>
> -----Original Message-----
> From:
> freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradius.org
> [mailto:freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradiu
> s.org] On Behalf Of Anup krishnan A
> Sent: Wednesday, October 06, 2010 4:11 AM
> To: FreeRadius users mailing list
> Subject: Re: WiMax VSA Support
>
>
> Hi Alan,
>
> Thank you for your quick response.
>
> We have already checked the dictionary and found that wimax dictionary is
> available in the freeradius server.
>
> Actually we are using Freeradius server 2.1.9 and Alvarion base-station
> and
> Alvarion ASN GW. Initially we created a service profile in Alvarion ASN GW
> for the user "test" using their management software 'AlvariStar'.
> And 'users' file in the freeradius has been updated to add the user "test"
> as follows,
>
> test Cleartext-Password := "test"
>  	Auth-Type = Local,
> 	Service-Type = Framed-User,
> 	Framed-Protocol = PPP,
> 	Framed-IP-Address = 192.168.0.33,
> 	Framed-IP-Netmask = 255.255.255.0,
> 	Framed-Routing = Broadcast-Listen,
> 	Filter-Id = "servprof2"
>
> where "servprof2" is the name of the service profile created in Alvarion
> ASN
> GW. In this case the authentication was successful and MS has got the IP
> as
> well.
>
> Then we tried to create the service profile for the user "test" from the
> Freeradius by using WiMAX attributes found in the file
> dictionary.wimax'.The
> entries for the user in the 'users' file is as shown below.
>
> test Cleartext-Password := "test"
>  	Auth-Type = Local,
> 	Service-Type = Framed-User,
> 	Framed-Protocol = PPP,
> 	Framed-IP-Address = 192.168.0.33,
> 	Framed-IP-Netmask = 255.255.255.0,
> 	WiMAX-Service-Profile-Id=1,
> 	WiMAX-Media-Flow-Type=Streaming-Video,
> 	WiMAX-Schedule-Type = Best-Effort,
> 	WiMAX-QoS-Id=01,
> 	WiMAX-Media-Flow-Type=Robust-Browser,
> 	WiMAX-Traffic-Priority=0,
> 	WiMAX-Maximum-Sustained-Traffic-Rate=512000
>
> In this case Freeradius has sent the Access-Accept, but the authentication
> process is not successful and MS is showing an error message as "EAP
> supplicant transferring error".
>
> I hope you understand the problem
>
> Regards,
> Anup
>
>
>
>> Anup wrote:
>>> Hi,
>>> I would like to know whether latest Freeradius version has the
>>> support for WiMax VSAs?
>>
>>   The server comes with documentation and dictionary files.  Please
>> read them.
>>
>>> Also please tell me how to send the WiMAX Qos Descriptors in
>>> Access-Accept
>>
>>   VSAs are just attributes.  They can be added / edited like anything
>> else.
>>
>>   Alan DeKok.
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>
>
>
> -----------------------------------------
> This email was sent using SquirrelMail.
>    "Webmail for nuts!"
> http://squirrelmail.org/
>
>
> ______________________________________
> Scanned and protected by Email scanner
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>



-----------------------------------------
This email was sent using SquirrelMail.
   "Webmail for nuts!"
http://squirrelmail.org/


______________________________________
Scanned and protected by Email scanner