WiMax VSA Support

[David Peterson]

I have not had any issues with 2.5 though 3.0 is giving me fits.   Your eap
configuration looks ok, check sites-available/inner-tunnel and make sure you
have all of the wimax entries uncommented.

David


-----Original Message-----
From: Anup krishnan A [mailto:anupkris at cdactvm.in] 
Sent: Wednesday, October 06, 2010 8:07 AM
To: David Peterson-WirelessConnections; FreeRadius users mailing list
Subject: RE: WiMax VSA Support

Hi David,

1)  You have to configure the radius server to use the inner-tunnel.

	Following are the entries in the eap.conf file.
	ttls {
		default_eap_type = md5
		copy_request_to_tunnel = yes
		use_tunneled_reply = yes
		virtual_server = "inner-tunnel"
	}

I hope this is what you meant by configure inner-tunnel in radius server.

Actually, the FreeRadius server is sending the Access-Accept with all WiMAX
Attributes for the user as we have given in the "users" file.
But  I think the Alvarion ASN Gateway is not handling or recognizing what we
are sending

2) Which version of the 4-Motion software are you using on your system?
	We are using 4motion Release 2.5M1.


Regards
Anup


> Anup,
>
> You have to configure the radius server to use the inner-tunnel.  
> Which version of the 4-Motion software are you using on your system?
>
> David
>
>
> -----Original Message-----
> From:
> freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradius.
> freeradius-users-bounces+org
> [mailto:freeradius-users-bounces+david.peterson=acc-corp.net at lists.fre
> eradiu
> s.org] On Behalf Of Anup krishnan A
> Sent: Wednesday, October 06, 2010 4:11 AM
> To: FreeRadius users mailing list
> Subject: Re: WiMax VSA Support
>
>
> Hi Alan,
>
> Thank you for your quick response.
>
> We have already checked the dictionary and found that wimax dictionary 
> is available in the freeradius server.
>
> Actually we are using Freeradius server 2.1.9 and Alvarion 
> base-station and Alvarion ASN GW. Initially we created a service 
> profile in Alvarion ASN GW for the user "test" using their management 
> software 'AlvariStar'.
> And 'users' file in the freeradius has been updated to add the user "test"
> as follows,
>
> test Cleartext-Password := "test"
>  	Auth-Type = Local,
> 	Service-Type = Framed-User,
> 	Framed-Protocol = PPP,
> 	Framed-IP-Address = 192.168.0.33,
> 	Framed-IP-Netmask = 255.255.255.0,
> 	Framed-Routing = Broadcast-Listen,
> 	Filter-Id = "servprof2"
>
> where "servprof2" is the name of the service profile created in 
> Alvarion ASN GW. In this case the authentication was successful and MS 
> has got the IP as well.
>
> Then we tried to create the service profile for the user "test" from 
> the Freeradius by using WiMAX attributes found in the file 
> dictionary.wimax'.The entries for the user in the 'users' file is as 
> shown below.
>
> test Cleartext-Password := "test"
>  	Auth-Type = Local,
> 	Service-Type = Framed-User,
> 	Framed-Protocol = PPP,
> 	Framed-IP-Address = 192.168.0.33,
> 	Framed-IP-Netmask = 255.255.255.0,
> 	WiMAX-Service-Profile-Id=1,
> 	WiMAX-Media-Flow-Type=Streaming-Video,
> 	WiMAX-Schedule-Type = Best-Effort,
> 	WiMAX-QoS-Id=01,
> 	WiMAX-Media-Flow-Type=Robust-Browser,
> 	WiMAX-Traffic-Priority=0,
> 	WiMAX-Maximum-Sustained-Traffic-Rate=512000
>
> In this case Freeradius has sent the Access-Accept, but the 
> authentication process is not successful and MS is showing an error 
> message as "EAP supplicant transferring error".
>
> I hope you understand the problem
>
> Regards,
> Anup
>
>
>
>> Anup wrote:
>>> Hi,
>>> I would like to know whether latest Freeradius version has the 
>>> support for WiMax VSAs?
>>
>>   The server comes with documentation and dictionary files.  Please 
>> read them.
>>
>>> Also please tell me how to send the WiMAX Qos Descriptors in 
>>> Access-Accept
>>
>>   VSAs are just attributes.  They can be added / edited like anything 
>> else.
>>
>>   Alan DeKok.
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>
>
>
> -----------------------------------------
> This email was sent using SquirrelMail.
>    "Webmail for nuts!"
> http://squirrelmail.org/
>
>
> ______________________________________
> Scanned and protected by Email scanner
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>



-----------------------------------------
This email was sent using SquirrelMail.
   "Webmail for nuts!"
http://squirrelmail.org/


______________________________________
Scanned and protected by Email scanner