FreeRadius, Active Directory, LDAP Authorization

[suggestme]

Thank you all for the suggestions.

I have already installed FreeRadius 2.1.12 which I am running, an I have got
ldap in file /usr/local/etc/raddb/modules/ldap; I have gone through it and I
am still not sure where the problem lies.
 
I have here included below the part of debug mode output that I have got
running radiusd -X. I have illustrated the output part after "Linked to
module rlm_ldap"


Module: Linked to module rlm_ldap
 Module: Instantiating module "ldap" from file
/usr/local/etc/raddb/modules/ldap
  ldap {
        server = "Example.com"
        port = 389
        password = ""
        identity = ""
        net_timeout = 1
        timeout = 4
        timelimit = 3
        tls_mode = no
        start_tls = no
        tls_require_cert = "allow"
   tls {
        start_tls = no
        require_cert = "allow"
   }
        basedn = "dc=Example,dc=com"
        filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
        auto_header = no
        access_attr_used_for_allow = yes
        groupname_attribute = "cn"
        groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
        dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap"
        ldap_debug = 0
        ldap_connections_number = 5
        compare_check_items = no
        do_xlat = yes
        set_auth_type = yes
  }
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed in
the "authenticate" section.
rlm_ldap: reading ldap<->radius mappings from file
/usr/local/etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS
Tunnel-Private-Group-Id
conns: 0x2853e2e0
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating module "acct_unique" from file
/usr/local/etc/raddb/modules/acct_unique
  acct_unique {
        key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating module "detail" from file
/usr/local/etc/raddb/modules/detail
  detail {
        detailfile =
"/usr/local/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d"
        header = "%t"
        detailperm = 384
        dirperm = 493
        locking = no
        log_packet_header = no
  }
 Module: Linked to module rlm_radutmp
 Module: Instantiating module "radutmp" from file
/usr/local/etc/raddb/modules/radutmp
  radutmp {
        filename = "/usr/local/var/log/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        perm = 384
        callerid = yes
  }
 Module: Linked to module rlm_attr_filter
 Module: Instantiating module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/modules/attr_filter
  attr_filter attr_filter.accounting_response {
        attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/modules/attr_filter
  attr_filter attr_filter.access_reject {
 attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
 } # modules
} # server
server inner-tunnel { # from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
 ... adding new socket proxy address * port 37323
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1 port 43820, id=155,
length=80
        User-Name = "test"
        User-Password = "guess"
        NAS-IP-Address = *Radius server IP address*
        NAS-Port = 0
        Message-Authenticator = 0x6dd8a6e1e5e521977c075d24d7df47f2
# Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
[files] users: Matched entry DEFAULT at line 1
++[files] returns ok
[ldap] performing user authorization for test
[ldap]  expand: %{Stripped-User-Name} ->
[ldap]  ... expanding second conditional
[ldap]  expand: %{User-Name} -> test
[ldap]  expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(sAMAccountName=test)
[ldap]  expand: dc=Example,dc=com -> dc=Example,dc=com
 [ldap] ldap_get_conn: Checking Id: 0
  [ldap] ldap_get_conn: Got Id: 0
  [ldap] attempting LDAP reconnection
  [ldap] (re)connect to LDAP server name:389, authentication 0
  [ldap] bind as / to LDAP server name:389
  [ldap] waiting for bind result ...
  [ldap] Bind was successful
  [ldap] performing search in dc=Example,dc=com, with filter
(sAMAccountName=test)
  [ldap] ldap_search() failed: Operations error
[ldap] search failed
  [ldap] ldap_release_conn: Release Id: 0
++[ldap] returns fail
Using Post-Auth-Type Reject
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject]     expand: %{User-Name} -> test
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 155 to 127.0.0.1 port 43820
Waking up in 4.9 seconds.
Cleaning up request 0 ID 155 with timestamp +7
Ready to process requests.


Thanks



--
View this message in context: http://freeradius.1045715.n5.nabble.com/FreeRadius-Active-Directory-LDAP-Authorization-tp5049129p5056936.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.