Sub-TLV's

[Ben Wiechman]

Quick SQL dump:

INSERT INTO `radgroupreply` (`id`, `groupname`, `attribute`, `op`, `value`)
VALUES
(208, 'WiMAX_Test3', 'WiMAX-QoS-Id', ':=', '101'),
(209, 'WiMAX_Test3', 'WiMAX-Service-Class-Name', ':=', 'DATA'),
(210, 'WiMAX_Test3', 'WiMAX-Schedule-Type', ':=', 'Best-Effort'),
(211, 'WiMAX_Test3', 'WiMAX-Traffic-Priority', ':=', '1'),
(212, 'WiMAX_Test3', 'WiMAX-Maximum-Sustained-Traffic-Rate', ':=',
'512000'),
(213, 'WiMAX_Test3', 'WiMAX-Reduced-Resources-Code', ':=', '1'),
(214, 'WiMAX_Test3', 'WiMAX-QoS-Id', '+=', '102'),
(215, 'WiMAX_Test3', 'WiMAX-Service-Class-Name', '+=', 'DATA'),
(216, 'WiMAX_Test3', 'WiMAX-Schedule-Type', '+=', 'Best-Effort'),
(217, 'WiMAX_Test3', 'WiMAX-Traffic-Priority', '+=', '1'),
(218, 'WiMAX_Test3', 'WiMAX-Maximum-Sustained-Traffic-Rate', '+=',
'400000'),
(219, 'WiMAX_Test3', 'WiMAX-Reduced-Resources-Code', '+=', '1'),
(220, 'WiMAX_Test3', 'WiMAX-Packet-Data-Flow-Id', ':=', '21'),
(221, 'WiMAX_Test3', 'WiMAX-Service-Data-Flow-Id', ':=', '21'),
(222, 'WiMAX_Test3', 'WiMAX-Direction', ':=', 'Uplink'),
(223, 'WiMAX_Test3', 'WiMAX-Activation-Trigger', ':=', '15'),
(224, 'WiMAX_Test3', 'WiMAX-Transport-Type', ':=', 'IPv4-CS'),
(225, 'WiMAX_Test3', 'WiMAX-Uplink-QOS-Id', ':=', '101'),
(226, 'WiMAX_Test3', 'WiMAX-Uplink-Classifier', ':=', 'permit in any src any
dst any priority 1'),
(227, 'WiMAX_Test3', 'WiMAX-Packet-Data-Flow-Id', ':=', '22'),
(228, 'WiMAX_Test3', 'WiMAX-Service-Data-Flow-Id', ':=', '22'),
(229, 'WiMAX_Test3', 'WiMAX-Direction', ':=', 'Downlink'),
(230, 'WiMAX_Test3', 'WiMAX-Activation-Trigger', ':=', '15'),
(231, 'WiMAX_Test3', 'WiMAX-Transport-Type', ':=', 'IPv4-CS'),
(232, 'WiMAX_Test3', 'WiMAX-Downlink-QOS-Id', ':=', '102'),
(233, 'WiMAX_Test3', 'WiMAX-Downlink-Classifier', ':=', 'permit in any src
any dst any priority 1');

Working example using a Wichorus ASN-GW.

As Alan said, you can check the dictionary. I'm not familiar with that TLV
so you might have to add it to the dictionary if it is post Release 1.3. 

Ben 

> -----Original Message-----
> From: freeradius-users-
> bounces+wiechman.lists=gmail.com at lists.freeradius.org
> [mailto:freeradius-users-
> bounces+wiechman.lists=gmail.com at lists.freeradius.org] On Behalf Of
> David Peterson
> Sent: Tuesday, January 11, 2011 9:26 AM
> To: 'FreeRadius users mailing list'
> Subject: RE: Sub-TLV's
> 
> OK perhaps an example of what I need to reply might be in order.  I
> have to
> send a WiMAX TLV WIMAX-Packet-Flow-Descriptor with say all four sub-
> tlv's.
> Would I format the reply as such:
> 
> Sub-tlv1 := value
> Subtlv2 += value2
> 
> 
> Also, do you know if there is a TLV named R3-IF-Descriptor?  I can't
> seem to
> locate it, it should be a newer WiMAX TLV.
> 
> David
> 
> -----Original Message-----
> From:
> freeradius-users-bounces+david.peterson=acc-
> corp.net at lists.freeradius.org
> [mailto:freeradius-users-bounces+david.peterson=acc-
> corp.net at lists.freeradiu
> s.org] On Behalf Of Alan DeKok
> Sent: Tuesday, January 11, 2011 10:08 AM
> To: David Peterson-WirelessConnections; FreeRadius users mailing list
> Subject: Re: Sub-TLV's
> 
> David Peterson wrote:
> > Is there support for Sub-TLV attributes currently
> 
>   Some.  See dictionary.wimax
> 
> > and if so, can someone
> > point me to documentation on how to format a reply for them?
> 
>   Just use the name, like any other attribute.
> 
>   Alan DeKok.
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> 
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html