Sub-TLV's

[David Peterson]

OK its becoming clearer.  It appears as though the vendor slightly modified
WiMAX NWG Stage 3 Rel.1.3.0.  I see that the dictionary file is
NWG_R1_V1.2.1-Stage-3.pdf.  Is there a newer version with the Rel. 1.3.0
attributes?

David



-----Original Message-----
From: Ben Wiechman [mailto:wiechman.lists at gmail.com] 
Sent: Wednesday, January 12, 2011 9:13 PM
To: David Peterson-WirelessConnections; FreeRadius users mailing list
Subject: RE: Sub-TLV's

Yes.

See /etc/raddb/dictionary

There are useful notes in your main dictionary file as well, in RHEL type
distros as /usr/share/freeradius/dictionary (or look to see the file that is
included under /etc/raddb/dictionary

Ben

> -----Original Message-----
> From: freeradius-users-
> bounces+wiechman.lists=gmail.com at lists.freeradius.org
> [mailto:freeradius-users-
> bounces+wiechman.lists=gmail.com at lists.freeradius.org] On Behalf Of
> David Peterson
> Sent: Tuesday, January 11, 2011 10:19 AM
> To: FreeRadius users mailing list
> Subject: RE: Sub-TLV's
> 
> Let's just say that it appears to be Vendor specific.  As I can't 
> release details, is required to be in a dictionary file in order to 
> work properly?
> 
> David
> 
> -----Original Message-----
> From: Ben Wiechman [mailto:wiechman.lists at gmail.com]
> Sent: Tuesday, January 11, 2011 10:36 AM
> To: David Peterson-WirelessConnections; FreeRadius users mailing list
> Subject: RE: Sub-TLV's
> 
> Quick SQL dump:
> 
> INSERT INTO `radgroupreply` (`id`, `groupname`, `attribute`, `op`,
> `value`)
> VALUES (208, 'WiMAX_Test3', 'WiMAX-QoS-Id', ':=', '101'), (209, 
> 'WiMAX_Test3', 'WiMAX-Service-Class-Name', ':=', 'DATA'), (210, 
> 'WiMAX_Test3', 'WiMAX-Schedule-Type', ':=', 'Best-Effort'), (211, 
> 'WiMAX_Test3', 'WiMAX-Traffic-Priority', ':=', '1'), (212, 
> 'WiMAX_Test3', 'WiMAX-Maximum-Sustained-Traffic-Rate', ':=', 
> '512000'), (213, 'WiMAX_Test3', 'WiMAX-Reduced-Resources-Code', ':=', 
> '1'), (214, 'WiMAX_Test3', 'WiMAX-QoS-Id', '+=', '102'), (215, 
> 'WiMAX_Test3', 'WiMAX-Service-Class-Name', '+=', 'DATA'), (216, 
> 'WiMAX_Test3', 'WiMAX-Schedule-Type', '+=', 'Best-Effort'), (217, 
> 'WiMAX_Test3', 'WiMAX-Traffic-Priority', '+=', '1'), (218, 
> 'WiMAX_Test3', 'WiMAX-Maximum-Sustained-Traffic-Rate', '+=', 
> '400000'), (219, 'WiMAX_Test3', 'WiMAX-Reduced-Resources-Code', '+=', 
> '1'), (220, 'WiMAX_Test3', 'WiMAX-Packet-Data-Flow-Id', ':=', '21'), 
> (221, 'WiMAX_Test3', 'WiMAX-Service-Data-Flow-Id', ':=', '21'), (222, 
> 'WiMAX_Test3', 'WiMAX-Direction', ':=', 'Uplink'), (223, 
> 'WiMAX_Test3', 'WiMAX-Activation-Trigger', ':=', '15'), (224, 
> 'WiMAX_Test3', 'WiMAX-Transport-Type', ':=', 'IPv4-CS'), (225, 
> 'WiMAX_Test3', 'WiMAX-Uplink-QOS-Id', ':=', '101'), (226, 
> 'WiMAX_Test3', 'WiMAX-Uplink-Classifier', ':=', 'permit in any src any 
> dst any priority 1'), (227, 'WiMAX_Test3', 
> 'WiMAX-Packet-Data-Flow-Id', ':=', '22'), (228, 'WiMAX_Test3', 
> 'WiMAX-Service-Data-Flow-Id', ':=', '22'), (229, 'WiMAX_Test3', 
> 'WiMAX-Direction', ':=', 'Downlink'), (230, 'WiMAX_Test3', 
> 'WiMAX-Activation-Trigger', ':=', '15'), (231, 'WiMAX_Test3', 
> 'WiMAX-Transport-Type', ':=', 'IPv4-CS'), (232, 'WiMAX_Test3', 
> 'WiMAX-Downlink-QOS-Id', ':=', '102'), (233, 'WiMAX_Test3', 
> 'WiMAX-Downlink-Classifier', ':=', 'permit in any src any dst any 
> priority 1');
> 
> Working example using a Wichorus ASN-GW.
> 
> As Alan said, you can check the dictionary. I'm not familiar with that 
> TLV so you might have to add it to the dictionary if it is post 
> Release 1.3.
> 
> Ben
> 
> > -----Original Message-----
> > From: freeradius-users-
> > bounces+wiechman.lists=gmail.com at lists.freeradius.org
> > [mailto:freeradius-users-
> > bounces+wiechman.lists=gmail.com at lists.freeradius.org] On Behalf Of
> > David Peterson
> > Sent: Tuesday, January 11, 2011 9:26 AM
> > To: 'FreeRadius users mailing list'
> > Subject: RE: Sub-TLV's
> >
> > OK perhaps an example of what I need to reply might be in order.  I 
> > have to send a WiMAX TLV WIMAX-Packet-Flow-Descriptor with say all 
> > four sub- tlv's.
> > Would I format the reply as such:
> >
> > Sub-tlv1 := value
> > Subtlv2 += value2
> >
> >
> > Also, do you know if there is a TLV named R3-IF-Descriptor?  I can't 
> > seem to locate it, it should be a newer WiMAX TLV.
> >
> > David
> >
> > -----Original Message-----
> > From:
> > freeradius-users-bounces+david.peterson=acc-
> > corp.net at lists.freeradius.org
> > [mailto:freeradius-users-bounces+david.peterson=acc-
> > corp.net at lists.freeradiu
> > s.org] On Behalf Of Alan DeKok
> > Sent: Tuesday, January 11, 2011 10:08 AM
> > To: David Peterson-WirelessConnections; FreeRadius users mailing 
> > list
> > Subject: Re: Sub-TLV's
> >
> > David Peterson wrote:
> > > Is there support for Sub-TLV attributes currently
> >
> >   Some.  See dictionary.wimax
> >
> > > and if so, can someone
> > > point me to documentation on how to format a reply for them?
> >
> >   Just use the name, like any other attribute.
> >
> >   Alan DeKok.
> > -
> > List info/subscribe/unsubscribe? See 
> > http://www.freeradius.org/list/users.html
> >
> > -
> > List info/subscribe/unsubscribe? See 
> > http://www.freeradius.org/list/users.html
> 
> 
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html