Error with AD/freeradius config
Gary Gatten
Ggatten at waddell.com
Fri Jul 15 18:28:30 CEST 2011
I can't guarantee the syntax of the ntlm_auth command is correct for OP's particular environment, but I will guarantee you must specify the correct path to the Samba ntlm_auth binary.
As for perms, I agree they can be tricky. If I run into issues I typically start running stuff as root. Not fail safe, but does uncover perms issues pretty quick.
G
-----Original Message-----
From: freeradius-users-bounces+ggatten=waddell.com at lists.freeradius.org [mailto:freeradius-users-bounces+ggatten=waddell.com at lists.freeradius.org] On Behalf Of Sallee, Stephen (Jake)
Sent: Friday, July 15, 2011 10:53 AM
To: FreeRadius users mailing list
Subject: RE: Error with AD/freeradius config
If I may interject... if Gary's hint does not pan out I would suggest also checking that the ntlm_auth binary is accessible to the FR daemon, I had an issue on my box that the file permissions were correct but one of the directories in the path was denying me access. So not only does the file need the correct permissions but every directory in the path does too. That one was a bugger to pin down the first time I came against it : )
Jake Sallee
Godfather of Bandwidth
System Engineer
University of Mary Hardin-Baylor
900 College St.
Belton, Texas
76513
Fone: 254-295-4658
Phax: 254-295-4221
-----Original Message-----
From: freeradius-users-bounces+jake.sallee=umhb.edu at lists.freeradius.org [mailto:freeradius-users-bounces+jake.sallee=umhb.edu at lists.freeradius.org] On Behalf Of Edge
Sent: Friday, July 15, 2011 10:42 AM
To: freeradius-users at lists.freeradius.org
Subject: Re: Error with AD/freeradius config
Hi
Arran, I did read the debug messages, I just didn't understand what they were telling me, I couldn't understand why it had failed to execute as the file was there, I was root and I even tried using an admin account - just in case..
Gary has given me a clue so off I go hunting..
Thanks Guys and have a good weekend
-----Original Message-----
From: freeradius-users-bounces+edgedemon=hotmail.com at lists.freeradius.org
[mailto:freeradius-users-bounces+edgedemon=hotmail.com at lists.freeradius.org]
On Behalf Of freeradius-users-request at lists.freeradius.org
Sent: 15 July 2011 16:17
To: freeradius-users at lists.freeradius.org
Subject: Freeradius-Users Digest, Vol 75, Issue 58
Send Freeradius-Users mailing list submissions to
freeradius-users at lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.freeradius.org/mailman/listinfo/freeradius-users
or, via email, send a message with subject or body 'help' to
freeradius-users-request at lists.freeradius.org
You can reach the person managing the list at
freeradius-users-owner at lists.freeradius.org
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Freeradius-Users digest..."
Today's Topics:
1. Re: Error with AD/freeradius config (Arran Cudbard-Bell)
2. Re: Stripped-User-Name Problems (Re: Unmatched ( or \(, and,
?more?broadly, setting Stripped-User-Name) (Alexander Clouter)
3. RE: Error with AD/freeradius config (Gary Gatten)
----------------------------------------------------------------------
Message: 1
Date: Fri, 15 Jul 2011 16:31:34 +0200
From: Arran Cudbard-Bell <a.cudbardb at freeradius.org>
Subject: Re: Error with AD/freeradius config
To: FreeRadius users mailing list
<freeradius-users at lists.freeradius.org>
Message-ID: <7DF14EEA-3164-48BD-996B-8EDC42C5981C at freeradius.org>
Content-Type: text/plain; charset=us-ascii
On Jul 15, 2011, at 4:26 PM, Edge wrote:
> Exec-Program output: Exec-Program: FAILED to execute
> /usr/local/etc/raddb/modules/ntlm_auth: Permission denied
> Exec-Program-Wait: plaintext: Exec-Program: FAILED to execute
> /usr/local/etc/raddb/modules/ntlm_auth: Permission denied
Helps to actually read the debug output you're posting ;)
Arran Cudbard-Bell
a.cudbardb at freeradius.org
RADIUS - Half the complexity of Diameter
------------------------------
Message: 2
Date: Fri, 15 Jul 2011 15:49:34 +0100
From: Alexander Clouter <alex at digriz.org.uk>
Subject: Re: Stripped-User-Name Problems (Re: Unmatched ( or \(, and,
?more?broadly, setting Stripped-User-Name)
To: freeradius-users at lists.freeradius.org
Message-ID: <uk06f8-ku7.ln1 at chipmunk.wormnet.eu>
Phil Mayers <p.mayers at imperial.ac.uk> wrote:
>
>>Unfortunately, when you set nostrip in the config, it doesn't add a
>>Stripped-User-Name attribute to the request, but when you unset it,
>>rlm_realms adds a Stripped-User-Name attribute and also updates the
>>User-Name attribute to the same value.
>
> I am 90% sure that's not what rlm_realm does. We use unlang to process
> realms now, but I am certain we used it with nostrip and it left the
> original User-Name intact and populated Stripped-User-Name.
>
You are right, we use rlm_realm and it leaves User-Name unadulterated.
This sounds like maybe the *inner* auth User-Name is realmless and making it's way out into outer.reply. When you use 'User-Name' in post-auth{} you will get reply:User-Name rather than request:User-Name if I remember correctly.
The fix is to *reject* inner-authentications that are realm-less.
Cheers
--
Alexander Clouter
.sigmonster says: You are the only person to ever get this message.
------------------------------
Message: 3
Date: Fri, 15 Jul 2011 10:16:48 -0500
From: Gary Gatten <Ggatten at waddell.com>
Subject: RE: Error with AD/freeradius config
To: "'FreeRadius users mailing list'"
<freeradius-users at lists.freeradius.org>
Message-ID:
<30615_1310743009_4E2059E1_30615_115_1_D9B37353831173459FDAA836D3B43499C5218
61F at WADPMBXV0.waddell.com>
Content-Type: text/plain; charset="us-ascii"
Exec-Program output: Exec-Program: FAILED to execute
/usr/local/etc/raddb/modules/ntlm_auth: Permission denied
Exec-Program-Wait: plaintext: Exec-Program: FAILED to execute
/usr/local/etc/raddb/modules/ntlm_auth: Permission denied
Your path to ntlm auth is wrong. You need to specify the path to the ntlm
auth bin/exe that comes with samba.
G
-----Original Message-----
From: freeradius-users-bounces+ggatten=waddell.com at lists.freeradius.org
[mailto:freeradius-users-bounces+ggatten=waddell.com at lists.freeradius.org]
On Behalf Of Edge
Sent: Friday, July 15, 2011 9:27 AM
To: freeradius-users at lists.freeradius.org
Subject: Error with AD/freeradius config
OK, sorry as this is a long mail because Im going to include as much config
as possible.
I have been playing around trying to get this to work with little success
though the debug error messages have changed since yesterday
Im having trouble getting freeradius to use ntlm_auth - the error massage is
now stating a permission error..
Just to confirm, Im following the steps on deployingradius.com ..
PAP has been tested and is working
Samba configured and working
wbinfo -a = works, having tested multiple logins
ntlm_auth --request-nt-key --domain=MYDOMAIN --username=user
--password=password = working, again tested with multiple logins
radtest user password localhost 0 testing123 = does not work, see debug info
at end of email..
Contents of/raddb/modules/ntlm_auth file
#
# For testing ntlm_auth authentication with PAP.
#
# If you have problems with authentication failing, even when the
# password is good, it may be a bug in Samba:
#
# https://bugzilla.samba.org/show_bug.cgi?id=6563
#
exec ntlm_auth {
wait = yes
program = "/usr/local/etc/raddb/modules/ntlm_auth --request-nt-key
--domain=xxxxxxxxxx --username=%{mschap:User-Name}
--password=%{User-Password}"
}
I have modified the authenticate sections of the raddb/sites-enabled/default
file, and of the raddb/sites-enabled/inner-tunnel file
Listed below are the authenticate sections only as that is all I have
changed....
sites-enabled/default
authenticate {
#
# PAP authentication, when a back-end database listed
# in the 'authorize' section supplies a password. The
# password can be clear-text, or encrypted.
Auth-Type PAP {
pap
}
#
# Most people want CHAP authentication
# A back-end database listed in the 'authorize' section
# MUST supply a CLEAR TEXT password. Encrypted passwords
# won't work.
Auth-Type CHAP {
chap
}
#
# MSCHAP authentication.
Auth-Type MS-CHAP {
mschap
}
# ntlm authentication.
ntlm_auth
# If you have a Cisco SIP server authenticating against
# FreeRADIUS, uncomment the following line, and the 'digest'
# line in the 'authorize' section.
digest
#
# Pluggable Authentication Modules.
# pam
#
# See 'man getpwent' for information on how the 'unix'
# module checks the users password. Note that packets
# containing CHAP-Password attributes CANNOT be authenticated
# against /etc/passwd! See the FAQ for details.
#
# For normal "crypt" authentication, the "pap" module should
# be used instead of the "unix" module. The "unix" module should
# be used for authentication ONLY for compatibility with legacy
# FreeRADIUS configurations.
#
unix
# Uncomment it if you want to use ldap for authentication
#
# Note that this means "check plain-text password against
# the ldap database", which means that EAP won't work,
# as it does not supply a plain-text password.
# Auth-Type LDAP {
# ldap
# }
#
# Allow EAP authentication.
eap
#
# The older configurations sent a number of attributes in
# Access-Challenge packets, which wasn't strictly correct.
# If you want to filter out these attributes, uncomment
# the following lines.
#
# Auth-Type eap {
# eap {
# handled = 1
# }
# if (handled && (Response-Packet-Type == Access-Challenge)) {
# attr_filter.access_challenge.post-auth
# handled # override the "updated" code from
attr_filter
# }
# }
}
#
raddb/sites-enabled/inner-tunnel file - again just showing the bit
modified..
#
authenticate {
#
# PAP authentication, when a back-end database listed
# in the 'authorize' section supplies a password. The
# password can be clear-text, or encrypted.
Auth-Type PAP {
pap
}
#
# Most people want CHAP authentication
# A back-end database listed in the 'authorize' section
# MUST supply a CLEAR TEXT password. Encrypted passwords
# won't work.
Auth-Type CHAP {
chap
}
# MSCHAP authentication.
Auth-Type MS-CHAP {
mschap
}
#
# NTLM authentication.
ntlm_auth
# Pluggable Authentication Modules.
# pam
#
# See 'man getpwent' for information on how the 'unix'
# module checks the users password. Note that packets
# containing CHAP-Password attributes CANNOT be authenticated
# against /etc/passwd! See the FAQ for details.
#
unix
# Uncomment it if you want to use ldap for authentication
#
# Note that this means "check plain-text password against
# the ldap database", which means that EAP won't work,
# as it does not supply a plain-text password.
# Auth-Type LDAP {
# ldap
# }
#
# Allow EAP authentication.
eap
}
DEFAULT Auth-Type = ntlm_auth has been added to the top of the users
file...
Full debug below...
root at istdevlamp10:~# radiusd -X
FreeRADIUS Version 2.1.11, for host x86_64-unknown-linux-gnu, built on Jun
20 2011 at 14:50:11
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/opendirectory
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/ntlm_auth
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file
/usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/soh
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/dynamic_clients
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/rediswho
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/replicate
including configuration file /usr/local/etc/raddb/modules/cui
including configuration file /usr/local/etc/raddb/modules/redis
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/eap.conf
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file
/usr/local/etc/raddb/sites-enabled/control-socket
main {
allow_core_dumps = no
}
including dictionary file /usr/local/etc/raddb/dictionary
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
sbindir = "/usr/local/sbin"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file
/usr/local/etc/raddb/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file
/usr/local/etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/usr/local/etc/raddb/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file
/usr/local/etc/raddb/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file
/usr/local/etc/raddb/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file
/usr/local/etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file
/usr/local/etc/raddb/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
allow_retry = yes
}
Module: Instantiating module "ntlm_auth" from file
/usr/local/etc/raddb/modules/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/usr/local/etc/raddb/modules/ntlm_auth --request-nt-key
--domain=london.edu --username=%{mschap:User-Name}
--password=%{User-Password}"
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file
/usr/local/etc/raddb/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file
/usr/local/etc/raddb/modules/unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
CA_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/usr/local/etc/raddb/certs/dh"
random_file = "/usr/local/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/usr/local/etc/raddb/modules/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/huntgroups"
hints = "/usr/local/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file
/usr/local/etc/raddb/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file
/usr/local/etc/raddb/modules/files
files {
usersfile = "/usr/local/etc/raddb/users"
acctusersfile = "/usr/local/etc/raddb/acct_users"
preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
compat = "no"
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file
/usr/local/etc/raddb/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file
/usr/local/etc/raddb/modules/detail
detail {
detailfile =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-
IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file
/usr/local/etc/raddb/modules/radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
} # modules
} # server
server inner-tunnel { # from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/usr/local/var/run/radiusd/radiusd.sock"
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address * port 50743
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /usr/local/var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1 port 43257, id=140,
length=60
User-Name = "xxxxxxx"
User-Password = "xxxxxx"
NAS-IP-Address = 163.119.77.150
NAS-Port = 0
# Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "xxxxxxx", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
[files] users: Matched entry DEFAULT at line 1
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. Authentication
may fail because of this.
++[pap] returns noop
Found Auth-Type = ntlm_auth
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[ntlm_auth] expand: --username=%{mschap:User-Name} -> --username=xxxxxxx
[ntlm_auth] expand: --password=%{User-Password} -> --password=xxxxxxx
Exec-Program output: Exec-Program: FAILED to execute
/usr/local/etc/raddb/modules/ntlm_auth: Permission denied
Exec-Program-Wait: plaintext: Exec-Program: FAILED to execute
/usr/local/etc/raddb/modules/ntlm_auth: Permission denied
Exec-Program: returned: 1
++[ntlm_auth] returns reject
Failed to authenticate the user.
Using Post-Auth-Type Reject
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> xxxxxx
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 8 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 8
Sending Access-Reject of id 140 to 127.0.0.1 port 43257
Waking up in 4.9 seconds.
Cleaning up request 8 ID 140 with timestamp +16484
Ready to process requests.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
<font size="1">
<div style='border:none;border-bottom:double windowtext 2.25pt;padding:0in
0in 1.0pt 0in'>
</div>
"This email is intended to be reviewed by only the intended recipient
and may contain information that is privileged and/or confidential.
If you are not the intended recipient, you are hereby notified that
any review, use, dissemination, disclosure or copying of this email
and its attachments, if any, is strictly prohibited. If you have
received this email in error, please immediately notify the sender by
return email and delete this email from your system."
</font>
------------------------------
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
End of Freeradius-Users Digest, Vol 75, Issue 58
************************************************
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
<font size="1">
<div style='border:none;border-bottom:double windowtext 2.25pt;padding:0in 0in 1.0pt 0in'>
</div>
"This email is intended to be reviewed by only the intended recipient
and may contain information that is privileged and/or confidential.
If you are not the intended recipient, you are hereby notified that
any review, use, dissemination, disclosure or copying of this email
and its attachments, if any, is strictly prohibited. If you have
received this email in error, please immediately notify the sender by
return email and delete this email from your system."
</font>
More information about the Freeradius-Users
mailing list