Access Accept vs Tunneled reply

[David Peterson]

Perhaps I have broken my install.  I see that I have in my radiusd.conf file
the following:
       $INCLUDE ${confdir}/modules/

        #  Extensible Authentication Protocol
        #
        #  For all EAP related authentications.
        #  Now in another file, because it is very large.
        #
        $INCLUDE eap.conf

However, under /raddb/ I have eap.conf and under modules I have a file
called eap.  Both look to be identical or nearly so.

Should I be getting rid of my eap.conf file?

David

-----Original Message-----
From:
freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradius.org
[mailto:freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradiu
s.org] On Behalf Of David Peterson
Sent: Friday, March 11, 2011 1:47 PM
To: FreeRadius users mailing list
Subject: RE: Access Accept vs Tunneled reply

I have set:
use_tunneled_reply = no
copy_request_to_tunnel = no

Set for both TTLS and PEAP sections.  Should I be setting those to yes?

David

-----Original Message-----
From:
freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradius.or
freeradius-users-bounces+g
[mailto:freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradiu
s.org] On Behalf Of Alan DeKok
Sent: Friday, March 11, 2011 1:41 PM
To: David Peterson-WirelessConnections; FreeRadius users mailing list
Subject: Re: Access Accept vs Tunneled reply

David Peterson wrote:
> Please correct my assumption if I am off.... I have been working on 
> getting reply attributes sent out to define VLAN's etc on a WiMax NAS.
> I see the following in radiusd -X:
> 
> (3495) [ttls] Got tunneled reply code 2

  These are the attributes *inside* of the tunnel.  Did you set
"use_tunneled_reply = yes" ?

  Alan DeKok.

-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html