No connection after access-accept.
David Peterson
davidp at wirelessconnections.net
Wed Oct 19 17:19:12 CEST 2011
Hi Krzystof,
You need to use the new Alvarion dictionary which is included in the 3.0
version I believe, Alan will undoubtedly correct me.
In addition you will need to change the TOS range and mask values. Here is
what I send to set up 1 IPCS flow on an Alvarion 4-Motion ASN.
Alvarion-R3-IF-Name += SGVLAN13
Alvarion-PDFID += 1
WiMAX-Packet-Data-Flow-Id += 1
WiMAX-Service-Data-Flow-Id += 1
WiMAX-Direction += 3
WiMAX-Transport-Type += 1
WiMAX-Uplink-QOS-Id += 1
WiMAX-Downlink-QOS-Id += 1
WiMAX-ClassifierID += 1
WiMAX-Classifier-Priority += 1
WiMAX-Classifier-Direction += 1
WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x1818FF
WiMAX-Transport-Type += 1
WiMAX-ClassifierID += 2
WiMAX-Classifier-Priority += 1
WiMAX-Classifier-Direction += 2
WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x0000FF
WiMAX-QoS-Id += 1
WiMAX-Schedule-Type += 2
WiMAX-Traffic-Priority += 1
WiMAX-Maximum-Sustained-Traffic-Rate += 256000
David Peterson
Senior WiMax Engineer
Wireless Connections
-----Original Message-----
From:
freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradius.org
[mailto:freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradiu
s.org] On Behalf Of Krzysztof Grobelak
Sent: Wednesday, October 19, 2011 11:06 AM
To: FreeRadius users mailing list
Subject: No connection after access-accept.
Hello.
I am trying to configure freeradius to work with Alvarion devices. It is
working fine with Extreme but for some reason it does not work with
4motion.
I installed the "master" version from git and I edited the dictionary
files.
My problem is that i see access-accept being sent but the connection is
not established and radio keeps trying to authenticate with freeradius.
Each attempt ends with access-accept being sent.
Thanks in advance
P.S. I am new to freeradius and wimax so please dont eat me alive...
Regards,
Krzysztof
Debug:
FreeRADIUS Version 3.0.0, for host i686-pc-linux-gnu, built on Oct 17
2011 at 10:26:54
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Compilation options:
Regex flavour: Posix
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/redis
including configuration file /usr/local/etc/raddb/modules/cui
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/sql
including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/ntlm_auth
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/replicate
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/sqlippool
including configuration file /usr/local/etc/raddb/sql/postgresql/ippool.conf
including configuration file /usr/local/etc/raddb/modules/opendirectory
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/rediswho
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/eap
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file
/usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/utf8
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/soh
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/dynamic_clients
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file
/usr/local/etc/raddb/sites-enabled/control-socket
main {
security {
allow_core_dumps = no
}
}
including dictionary file /usr/local/etc/raddb/dictionary
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
sbindir = "/usr/local/sbin"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
max_connections = 16
}
client 10.190.0.2 {
require_message_authenticator = no
secret = "pass"
shortname = "Testing"
nastype = "other"
max_connections = 16
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file
/usr/local/etc/raddb/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file
/usr/local/etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/usr/local/etc/raddb/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file
/usr/local/etc/raddb/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file
/usr/local/etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file
/usr/local/etc/raddb/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
passchange {
}
allow_retry = yes
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file
/usr/local/etc/raddb/modules/eap
eap {
default_eap_type = "ttls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
CA_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/usr/local/etc/raddb/certs/dh"
random_file = "/usr/local/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = yes
use_tunneled_reply = yes
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/usr/local/etc/raddb/modules/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/huntgroups"
hints = "/usr/local/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file
/usr/local/etc/raddb/modules/files
files {
usersfile = "/usr/local/etc/raddb/users"
acctusersfile = "/usr/local/etc/raddb/acct_users"
preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
compat = "no"
}
Module: Checking preacct {...} for more modules to load
Module: Loading virtual module acct_unique
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file
/usr/local/etc/raddb/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_wimax
Module: Instantiating module "wimax" from file
/usr/local/etc/raddb/modules/wimax
wimax {
delete_mppe_keys = no
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file
/usr/local/etc/raddb/modules/unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file
/usr/local/etc/raddb/modules/radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from
file /usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
} # modules
} # server
server inner-tunnel { # from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/usr/local/var/run/radiusd/radiusd.sock"
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /usr/local/var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Opening new proxy address * port 1814
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=225,
length=226
User-Name = "{sm=1}test at company.ie"
EAP-Message =
0x0201002a017b736d3d317d6d61676e612e74616c6c616768742e7465737440616972737065
65642e6965
Message-Authenticator = 0xb0e4f53c239e82a5a9424643abac90c5
NAS-Identifier = "BTS105"
NAS-IP-Address = 10.190.0.2
Calling-Station-Id = "00-26-82-D0-B6-F6"
WiMAX-BS-Id = 0xffc6c8690100
NAS-Port-Type = Wireless-802.16
Framed-MTU = 2000
Service-Type = Framed-User
WiMAX-GMT-Timezone-offset = 0
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
Attr-26.24757.1.7 = 0x0000028a
(0) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(0) group authorize {
(0) - entering group authorize {...}
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) eap : EAP packet type response id 1 length 42
(0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) Found Auth-Type = ?
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0) group authenticate {
(0) - entering group authenticate {...}
(0) eap : EAP Identity
(0) eap : processing type tls
(0) tls : Initiate
(0) tls : Start returned 1
(0) [eap] = handled
Sending Access-Challenge of id 225 to 10.190.0.2 port 1812
EAP-Message = 0x010200061520
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4524932a452686bf0e6f9b30d966adf3
(0) Finished request 0.
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=226,
length=290
User-Name = "{sm=1}test at company.ie"
EAP-Message =
0x0202005815800000004e16030100490100004503014d6f0492446dcf37684a8ba3964276e6
a0af14e11c0c66ba0bfe09bee47296d900001e00390038003500160013000a00330032002f00
15001200090014001100080100
Message-Authenticator = 0x16b9a8766e5ca7d66bd4109f08badf56
NAS-Identifier = "BTS105"
NAS-IP-Address = 10.190.0.2
Calling-Station-Id = "00-26-82-D0-B6-F6"
WiMAX-BS-Id = 0xffc6c8690100
NAS-Port-Type = Wireless-802.16
Framed-MTU = 2000
Service-Type = Framed-User
WiMAX-GMT-Timezone-offset = 0
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
Attr-26.24757.1.7 = 0x0000028a
State = 0x4524932a452686bf0e6f9b30d966adf3
(1) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(1) group authorize {
(1) - entering group authorize {...}
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) eap : EAP packet type response id 2 length 88
(1) eap : Continuing tunnel setup.
(1) [eap] = ok
(1) Found Auth-Type = ?
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(1) group authenticate {
(1) - entering group authenticate {...}
(1) eap : Request found, released from the list
(1) eap : EAP/ttls
(1) eap : processing type ttls
(1) ttls : Authenticate
(1) ttls : processing EAP-TLS
TLS Length 78
(1) ttls : Length Included
(1) ttls : eaptls_verify returned 11
(1) ttls : (other): before/accept initialization
(1) ttls : TLS_accept: before/accept initialization
(1) ttls : <<< TLS 1.0 Handshake [length 0049], ClientHello
(1) ttls : TLS_accept: SSLv3 read client hello A
(1) ttls : >>> TLS 1.0 Handshake [length 002a], ServerHello
(1) ttls : TLS_accept: SSLv3 write server hello A
(1) ttls : >>> TLS 1.0 Handshake [length 085e], Certificate
(1) ttls : TLS_accept: SSLv3 write certificate A
(1) ttls : >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange
(1) ttls : TLS_accept: SSLv3 write key exchange A
(1) ttls : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
(1) ttls : TLS_accept: SSLv3 write server done A
(1) ttls : TLS_accept: SSLv3 flush data
(1) ttls : TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
(1) ttls : eaptls_process returned 13
(1) [eap] = handled
Sending Access-Challenge of id 226 to 10.190.0.2 port 1812
EAP-Message =
0x0103040015c000000aad160301002a0200002603014e9ee50972fa598b689b6f459a90c557
abd4de3970630ee299ae5a309acdf4ec00003900160301085e0b00085a0008570003a6308203
a23082028aa003020102020101300d06092a864886f70d0101040500308193310b3009060355
040613024652310f300d060355040813065261646975733112301006035504071309536f6d65
776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886
f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d457861
6d706c6520436572746966696361746520417574686f72697479
EAP-Message =
0x301e170d3131313031333039353734375a170d3132313031323039353734375a307c310b30
09060355040613024652310f300d0603550408130652616469757331153013060355040a130c
4578616d706c6520496e632e312330210603550403131a4578616d706c652053657276657220
43657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d
706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a028201
0100caef6b9b67bdef4ad8e1e44128bc7e4d59b10f7fea2f25a815df34e36e48223a3812b6b4
c9005ddf99cf79afe5a4645eb7847cdaa444ad11ad858447f05e
EAP-Message =
0xbb17624bb71f12a488110b381a1a629f04fe7811e5589b7cfebad4e16d89ce6b982880f28d
b5f6817bda4db85b83520a6d47f682e224f70e9a104fc421ca712b8fa4c1b9e6c98329a5db41
50bb6d06fe29729e2842c5ecb6960b89cbdadc1ec91e7eadbdb4288023659fef46b02ec89bb4
7026e86c85aefb37d6df74167a3e12279d32b42199ba04013f8d4985c218365f0f60c3d9af22
7a3949125925db3ffb1bdccf34548f7626dac63e22b0624b6f16669d47fbc7ca4ddf2f794d00
4b901ecb090203010001a317301530130603551d25040c300a06082b06010505070301300d06
092a864886f70d01010405000382010100b676c0afe25190b575
EAP-Message =
0x1fa8ec975b02e09c61c8b25c4e2b7fe96b9275018524ef5bfecace1625ea8a09aaccc1a0b9
cdb2ebe7d1780ecf6a2bf775d639944c27881d5ea4d6fb013799ca759216777b46ee8dbdd9b6
6346ad9ee5b4e1854f04fa495bc64ce62702c50f3ba637d28c835c3113ca9984a94b1b3e6402
8034c73d734af96bdbb3e7bbb427372fb069af913eb2ced4ef9253a87050138334320cd2f563
c457de969f8472fd861282613fb501a0732e1bc2e9a0eb41caa6cb481c773f79737c1a9bc0e9
5e795ee5a0974fb2752d947606422dfba0e2c45b046c834c0553aecdd2b3a37952050de7a2d6
e27be9065dc29bc10b90188a7faf20beed7b904c0004ab308204
EAP-Message = 0xa73082038fa0030201020209
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4524932a442786bf0e6f9b30d966adf3
(1) Finished request 1.
Waking up in 0.1 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=227,
length=208
User-Name = "{sm=1}test at company.ie"
EAP-Message = 0x020300061500
Message-Authenticator = 0x9a77a1ab1819f89e18fb8f7a8d263dbc
NAS-Identifier = "BTS105"
NAS-IP-Address = 10.190.0.2
Calling-Station-Id = "00-26-82-D0-B6-F6"
WiMAX-BS-Id = 0xffc6c8690100
NAS-Port-Type = Wireless-802.16
Framed-MTU = 2000
Service-Type = Framed-User
WiMAX-GMT-Timezone-offset = 0
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
Attr-26.24757.1.7 = 0x0000028a
State = 0x4524932a442786bf0e6f9b30d966adf3
(2) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(2) group authorize {
(2) - entering group authorize {...}
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) eap : EAP packet type response id 3 length 6
(2) eap : Continuing tunnel setup.
(2) [eap] = ok
(2) Found Auth-Type = ?
(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(2) group authenticate {
(2) - entering group authenticate {...}
(2) eap : Request found, released from the list
(2) eap : EAP/ttls
(2) eap : processing type ttls
(2) ttls : Authenticate
(2) ttls : processing EAP-TLS
(2) ttls : Received TLS ACK
(2) ttls : Received TLS ACK
(2) ttls : ACK handshake fragment handler
(2) ttls : eaptls_verify returned 1
(2) ttls : eaptls_process returned 13
(2) [eap] = handled
Sending Access-Challenge of id 227 to 10.190.0.2 port 1812
EAP-Message =
0x0104040015c000000aad00ec1d720e4a7e8a98300d06092a864886f70d0101050500308193
310b3009060355040613024652310f300d060355040813065261646975733112301006035504
071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e312030
1e06092a864886f70d010901161161646d696e406578616d706c652e636f6d31263024060355
0403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d31
31313031333039353734375a170d3132313031323039353734375a308193310b300906035504
0613024652310f300d0603550408130652616469757331123010
EAP-Message =
0x06035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e
632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d3126
30240603550403131d4578616d706c6520436572746966696361746520417574686f72697479
30820122300d06092a864886f70d01010105000382010f003082010a0282010100be734cc62e
cb7177f45d9f49d0dc7c67f1e8f71f9ad048dd67a12de738c98729d524e687e47b801bf912a3
ce76ff5c35cbbae16eed0733b5e51b53633123803af7f8bdb2a456b82f3c022ab8aa75e09e55
f898044a1de747799af4506d191327f3cb2fd28c87d277828b1b
EAP-Message =
0x5372af25f28e4dc8ece69051878c673e3036fad0165be210ee1e208c762dbd201af930f8d3
0c2d8e1f112afa92bec4462e0f812d645e0572c991a9f1ff3fb7938f9aa1c92db6464ea6025f
c34af023dc152c09ac6074742f3b1766cfca4c352255553bea37de71ea152bb306cd1893e111
19326b7a5bdf957fc90726ffcf49b542285aeda0480ced4f180547fe0449400dfd786fc50203
010001a381fb3081f8301d0603551d0e04160414b57317268d6d7a07453f567b60d8e38ab31a
f2a13081c80603551d230481c03081bd8014b57317268d6d7a07453f567b60d8e38ab31af2a1
a18199a48196308193310b3009060355040613024652310f300d
EAP-Message =
0x060355040813065261646975733112301006035504071309536f6d65776865726531153013
060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d01090116116164
6d696e406578616d706c652e636f6d312630240603550403131d4578616d706c652043657274
6966696361746520417574686f72697479820900ec1d720e4a7e8a98300c0603551d13040530
030101ff300d06092a864886f70d010105050003820101000145888b12dc92a1ae57d9cf122d
90702ccf6fdeacf92f4e46bdab9773d80bb5373ddacd234f03fd8d8f8587b515ba24b28931ff
ec882ad044f8bc07f3c510b90f86e302639082c1d1fbc9fd9d2b
EAP-Message = 0x29f6a43153b63396708d1c2a
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4524932a472086bf0e6f9b30d966adf3
(2) Finished request 2.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=228,
length=208
User-Name = "{sm=1}test at company.ie"
EAP-Message = 0x020400061500
Message-Authenticator = 0xe3f7dbd13796664921230156fd4a7f0b
NAS-Identifier = "BTS105"
NAS-IP-Address = 10.190.0.2
Calling-Station-Id = "00-26-82-D0-B6-F6"
WiMAX-BS-Id = 0xffc6c8690100
NAS-Port-Type = Wireless-802.16
Framed-MTU = 2000
Service-Type = Framed-User
WiMAX-GMT-Timezone-offset = 0
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
Attr-26.24757.1.7 = 0x0000028a
State = 0x4524932a472086bf0e6f9b30d966adf3
(3) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(3) group authorize {
(3) - entering group authorize {...}
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) eap : EAP packet type response id 4 length 6
(3) eap : Continuing tunnel setup.
(3) [eap] = ok
(3) Found Auth-Type = ?
(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(3) group authenticate {
(3) - entering group authenticate {...}
(3) eap : Request found, released from the list
(3) eap : EAP/ttls
(3) eap : processing type ttls
(3) ttls : Authenticate
(3) ttls : processing EAP-TLS
(3) ttls : Received TLS ACK
(3) ttls : Received TLS ACK
(3) ttls : ACK handshake fragment handler
(3) ttls : eaptls_verify returned 1
(3) ttls : eaptls_process returned 13
(3) [eap] = handled
Sending Access-Challenge of id 228 to 10.190.0.2 port 1812
EAP-Message =
0x010502cb158000000aad6b687c3b13bd2cbcdc94906e01fea4a72a53605631056850f7c340
7a5d7b7a88d58a990667955f91c7e7fd1d4bcc1cb32597585648a06987428bb59b80040251ea
1eb36ca37e6b08d6dcff0bbac544ee590b97dcdd3043216a8d7c43b3b8177a6d50c34a1954b7
97f6ce1b83260aec1f9cd4f49b89bf166b6fcbe2169a6cdfdd381bfdc0210904a4332192d206
d220b4227586268fe877dec3e39b6c9cfa223f5af7f750fd76160301020d0c0002090080f261
ea67ca98641e7618ffeaf9dbfbfeba8524299d1674bbae7d654b45ddb4d4d56cfc334a0d31a3
3b07a51ec227e83c6111384da4c513b3799894ab435ab01f0308
EAP-Message =
0xbae422a62095161d878138f148293e9d8bbdd8e1f17eeb6aea213178d729efd10049433c42
9ea9685564ff39a81b78828cd381e4ebb6ff4a2022e92349230001020080cf073ac84159ffdf
2a3954bc6d8c5b241548eef76ea49c6f5648bf586017e4f8038d6956580fa5bd17a7199c7b05
bec37333162d8c6302c80092a8339aaecdcd44d3f77964b938c579d2fe5f5e2eb90d52b0215d
ec2972f639283ac415d95b1aecb8d856e28eababe9ee8f662b385efb60b09741356027269b5a
089c7c85738001004c76e655fcfb777d949b3e64e0018f329eedb978f1294c0f4fe10736b52d
f39df6edf0f5634de3dc17614893582df2e251c5b6acd61276d0
EAP-Message =
0xb71e3de49e55f6775effac0d28046d1510714dbd68c4d55dedb7329f9ba3de55154a4ffd8d
2aad7081dc07b232ff609ca8c19743ba19ccd2d1b3bf35dd1ccd78c1d54f477a4336188fb929
8426a941501972562ed1fca0efad8c451b0ec15674ff86500e67617241c95625ddecc82feefc
41c0eb91cdab0cc56176884e28aab3c850a81bd7736e1ec133d6b83db28db10623c552c5f7a2
d7a6d59e0f1cf362b155e415a274088d2eb875d07acd63236660e40f200f6055bd2c0c934777
c61d55c1a57d7983d867c016030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4524932a462186bf0e6f9b30d966adf3
(3) Finished request 3.
Waking up in 0.2 seconds.
Waking up in 4.3 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=229,
length=410
User-Name = "{sm=1}test at company.ie"
EAP-Message =
0x020500d01580000000c61603010086100000820080e3190ec3957550a29a5f545907823a1e
adcd83d25d26b74f1858aae52bac948aef1e3d75bc2adff031a57ad656d2d09066f0cae0630e
0c66d0487abc980cb7d6631a6531f05cba19b4a94f628a6bda9a90aae7e58f33fe204399f1fc
d215d007dba697579f7bcb002baa5d67c06a10d82953c53a31b100711f4f0d07e550a3d41403
0100010116030100308a7e900fbfb4f5de1ef3c91092938dee297c5a4b41f537309996762989
cffc3aa2475130e85a6cfcbd3cc5d4f4a38b01
Message-Authenticator = 0x4f4cb9ffdb83cca6564a6d11de9eca5e
NAS-Identifier = "BTS105"
NAS-IP-Address = 10.190.0.2
Calling-Station-Id = "00-26-82-D0-B6-F6"
WiMAX-BS-Id = 0xffc6c8690100
NAS-Port-Type = Wireless-802.16
Framed-MTU = 2000
Service-Type = Framed-User
WiMAX-GMT-Timezone-offset = 0
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
Attr-26.24757.1.7 = 0x0000028a
State = 0x4524932a462186bf0e6f9b30d966adf3
(4) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(4) group authorize {
(4) - entering group authorize {...}
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) eap : EAP packet type response id 5 length 208
(4) eap : Continuing tunnel setup.
(4) [eap] = ok
(4) Found Auth-Type = ?
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(4) group authenticate {
(4) - entering group authenticate {...}
(4) eap : Request found, released from the list
(4) eap : EAP/ttls
(4) eap : processing type ttls
(4) ttls : Authenticate
(4) ttls : processing EAP-TLS
TLS Length 198
(4) ttls : Length Included
(4) ttls : eaptls_verify returned 11
(4) ttls : <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
(4) ttls : TLS_accept: SSLv3 read client key exchange A
(4) ttls : <<< TLS 1.0 ChangeCipherSpec [length 0001]
(4) ttls : <<< TLS 1.0 Handshake [length 0010], Finished
(4) ttls : TLS_accept: SSLv3 read finished A
(4) ttls : >>> TLS 1.0 ChangeCipherSpec [length 0001]
(4) ttls : TLS_accept: SSLv3 write change cipher spec A
(4) ttls : >>> TLS 1.0 Handshake [length 0010], Finished
(4) ttls : TLS_accept: SSLv3 write finished A
(4) ttls : TLS_accept: SSLv3 flush data
(4) ttls : (other): SSL negotiation finished successfully
SSL Connection Established
(4) ttls : eaptls_process returned 13
(4) [eap] = handled
Sending Access-Challenge of id 229 to 10.190.0.2 port 1812
EAP-Message =
0x0106004515800000003b14030100010116030100303a882b92af53c50ce085959593e73fca
32ab9a7bd2e2e0a895c165c0a4163a638e8f12fef6f0bc8878a70cfcda0548a8
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4524932a412286bf0e6f9b30d966adf3
(4) Finished request 4.
Waking up in 0.2 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=230,
length=378
User-Name = "{sm=1test at company.ie"
EAP-Message =
0x020600b0150017030100201783b2821501d183457ee81425c3bcbfd372c1207cc52b44e4af
3250a771e4181703010080a65edf5e1fddb09f70ebffef22b5811ebb4d7f3143b2d1ecf88e2a
f29edd0178dc38aa45de3e8ac0106fa7259392dbb721ed242bf6fd1a79cdc10faad024b583e8
710f2396246d34353b915f3a49771b11ed93e106564b0f94f208631a4f9852c21452c53492d5
302b2571ec8f1b95d0b1abdaf202da0f42b9b68c863653886c
Message-Authenticator = 0x064bdfc96ada80a4ac9a92242232b9ae
NAS-Identifier = "BTS105"
NAS-IP-Address = 10.190.0.2
Calling-Station-Id = "00-26-82-D0-B6-F6"
WiMAX-BS-Id = 0xffc6c8690100
NAS-Port-Type = Wireless-802.16
Framed-MTU = 2000
Service-Type = Framed-User
WiMAX-GMT-Timezone-offset = 0
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
Attr-26.24757.1.7 = 0x0000028a
State = 0x4524932a412286bf0e6f9b30d966adf3
(5) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(5) group authorize {
(5) - entering group authorize {...}
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) eap : EAP packet type response id 6 length 176
(5) eap : Continuing tunnel setup.
(5) [eap] = ok
(5) Found Auth-Type = ?
(5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(5) group authenticate {
(5) - entering group authenticate {...}
(5) eap : Request found, released from the list
(5) eap : EAP/ttls
(5) eap : processing type ttls
(5) ttls : Authenticate
(5) ttls : processing EAP-TLS
(5) ttls : eaptls_verify returned 7
(5) ttls : Done initial handshake
(5) ttls : eaptls_process returned 7
(5) ttls : Session established. Proceeding to decode tunneled attributes.
(5) ttls : Got tunneled request
User-Name = "30001020"
MS-CHAP-Challenge = 0x967d3f6435e31b63
MS-CHAP-Response =
0xb801000000000000000000000000000000000000000000000000b32723b5ce6e52ba066370
add032fa03fecc6350d759fa7f
FreeRADIUS-Proxied-To = 127.0.0.1
(5) ttls : Sending tunneled request
User-Name = "30001020"
MS-CHAP-Challenge = 0x967d3f6435e31b63
MS-CHAP-Response =
0xb801000000000000000000000000000000000000000000000000b32723b5ce6e52ba066370
add032fa03fecc6350d759fa7f
FreeRADIUS-Proxied-To = 127.0.0.1
NAS-Identifier = "BTS105"
NAS-IP-Address = 10.190.0.2
Calling-Station-Id = "00-26-82-D0-B6-F6"
WiMAX-BS-Id = 0xffc6c8690100
NAS-Port-Type = Wireless-802.16
Framed-MTU = 2000
Service-Type = Framed-User
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
Attr-26.24757.1.7 = 0x0000028a
server inner-tunnel {
(5) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
(5) group authorize {
(5) - entering group authorize {...}
(5) [chap] = noop
(5) mschap : Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
(5) [mschap] = ok
(5) eap : No EAP-Message, not doing EAP
(5) [eap] = noop
(5) files : users: Matched entry 30001020 at line 99
(5) [files] = ok
(5) [preprocess] = ok
(5) Found Auth-Type = ?
(5) # Executing group from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
(5) group MS-CHAP {
(5) - entering group MS-CHAP {...}
(5) mschap : Told to do MS-CHAPv1 with NT-Password
(5) mschap : adding MS-CHAPv1 MPPE keys
(5) [mschap] = ok
(5) # Executing section post-auth from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
(5) group post-auth {
(5) - entering group post-auth {...}
(5) update outer.reply {
(5) expand: %{request:User-Name} -> 30001020
(5) } # update outer.reply = noop
(5) wimax : No EAP-MSK or EAP-EMSK. Cannot create WiMAX keys.
(5) [wimax] = noop
} # server inner-tunnel
(5) ttls : Got tunneled reply code 2
Alvarion-R3-IF-Name += "CPEL3Mgmt"
Alvarion-PDFID += 1
WiMAX-Packet-Data-Flow-Id += 1
WiMAX-Direction += Bi-Directional
WiMAX-Transport-Type += IPv4-CS
WiMAX-Uplink-QOS-Id += 1
WiMAX-Downlink-QOS-Id += 1
WiMAX-ClassifierID += 2
WiMAX-Classifier-Priority += 1
WiMAX-Classifier-Direction += IN
WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x31353739323633
WiMAX-ClassifierID += 1
WiMAX-Classifier-Priority += 1
WiMAX-Classifier-Direction += OUT
WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x3635353335
WiMAX-QoS-Id += 1
WiMAX-Schedule-Type += Best-Effort
WiMAX-Traffic-Priority += 4
WiMAX-Maximum-Sustained-Traffic-Rate += 512000
WiMAX-IP-Technology += PMIP4
Alvarion-R3-IF-Name += "HazelL2Service"
Alvarion-PDFID += 2
WiMAX-Packet-Data-Flow-Id += 2
WiMAX-Direction += Bi-Directional
WiMAX-Transport-Type += Ethernet
WiMAX-Uplink-QOS-Id += 2
WiMAX-Downlink-QOS-Id += 2
WiMAX-ClassifierID += 1
WiMAX-Classifier-Priority += 1
WiMAX-Classifier-Direction += Bi-Directional
WiMAX-VLAN-ID += 175
WiMAX-QoS-Id += 2
WiMAX-Schedule-Type += nrtPS
WiMAX-Traffic-Priority += 1
WiMAX-Maximum-Sustained-Traffic-Rate += 4096000
WiMAX-Minimum-Reserved-Traffic-Rate += 1024000
WiMAX-IP-Technology += Ethernet-CS
WiMAX-hHA-IP-MIP4 += 12.12.12.12
Session-Timeout = 3600
Reply-Message = "4motion test"
MS-CHAP-MPPE-Keys =
0x250838025ed089c5740e1ec19c1d0bedd9776bd85e9fca880000000000000000
MS-MPPE-Encryption-Policy = Encryption-Allowed
MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(5) ttls : Got tunneled Access-Accept
(5) eap : Freeing handler
(5) [eap] = ok
(5) # Executing section post-auth from file
/usr/local/etc/raddb/sites-enabled/default
(5) group post-auth {
(5) - entering group post-auth {...}
(5) update request {
(5) expand: %{User-Name} -> {sm=1}test at company.ie
(5) } # update request = noop
(5) update reply {
(5) expand: %{reply:EAP-MSK} ->
0x1fb12ddd1fa37055e2178c1525d32d189d720d0987006686a6a5306992df472e3c1a0fade5
9132dd591aed447610e20c90a230fa5e7e345461261f8893588691
(5) } # update reply = noop
(5) wimax : MIP-RK =
0x34cb0114be346973d5832ba7410516ed882d1fb1fb0ae3ad608e687c48b01ab6948fd63668
f8d0e5fbdb1c3169e676b44aea80064919ae759cc997505584dbf7
(5) wimax : MIP-SPI = dd1974b7
(5) [wimax] = updated
Sending Access-Accept of id 230 to 10.190.0.2 port 1812
User-Name = "30001020"
Alvarion-R3-IF-Name = "CPEL3Mgmt"
Alvarion-PDFID = 1
WiMAX-Packet-Data-Flow-Id = 1
WiMAX-Direction = Bi-Directional
WiMAX-Transport-Type = IPv4-CS
WiMAX-Uplink-QOS-Id = 1
WiMAX-Downlink-QOS-Id = 1
WiMAX-ClassifierID = 2
WiMAX-Classifier-Priority = 1
WiMAX-Classifier-Direction = IN
WiMAX-IP-TOS-DSCP-Range-and-Mask = 0x31353739323633
WiMAX-ClassifierID = 1
WiMAX-Classifier-Priority = 1
WiMAX-Classifier-Direction = OUT
WiMAX-IP-TOS-DSCP-Range-and-Mask = 0x3635353335
WiMAX-QoS-Id = 1
WiMAX-Schedule-Type = Best-Effort
WiMAX-Traffic-Priority = 4
WiMAX-Maximum-Sustained-Traffic-Rate = 512000
WiMAX-IP-Technology = Ethernet-CS
Alvarion-R3-IF-Name = "HazelL2Service"
Alvarion-PDFID = 2
WiMAX-Packet-Data-Flow-Id = 2
WiMAX-Direction = Bi-Directional
WiMAX-Transport-Type = Ethernet
WiMAX-Uplink-QOS-Id = 2
WiMAX-Downlink-QOS-Id = 2
WiMAX-ClassifierID = 1
WiMAX-Classifier-Priority = 1
WiMAX-Classifier-Direction = Bi-Directional
WiMAX-VLAN-ID = 175
WiMAX-QoS-Id = 2
WiMAX-Schedule-Type = nrtPS
WiMAX-Traffic-Priority = 1
WiMAX-Maximum-Sustained-Traffic-Rate = 4096000
WiMAX-Minimum-Reserved-Traffic-Rate = 1024000
WiMAX-IP-Technology = Ethernet-CS
WiMAX-hHA-IP-MIP4 = 12.12.12.12
Session-Timeout = 3600
Reply-Message = "4motion test"
MS-CHAP-MPPE-Keys =
0x250838025ed089c5740e1ec19c1d0bedd9776bd85e9fca880000000000000000
MS-MPPE-Encryption-Policy = Encryption-Allowed
MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
MS-MPPE-Recv-Key =
0x1fb12ddd1fa37055e2178c1525d32d189d720d0987006686a6a5306992df472e
MS-MPPE-Send-Key =
0x3c1a0fade59132dd591aed447610e20c90a230fa5e7e345461261f8893588691
EAP-Message = 0x03060004
Message-Authenticator = 0x00000000000000000000000000000000
WiMAX-MSK =
0x1fb12ddd1fa37055e2178c1525d32d189d720d0987006686a6a5306992df472e3c1a0fade5
9132dd591aed447610e20c90a230fa5e7e345461261f8893588691
(5) Finished request 5.
Waking up in 0.1 seconds.
Waking up in 0.1 seconds.
Waking up in 2.9 seconds.
(0) Cleaning up request packet ID 225 with timestamp +85
Waking up in 0.1 seconds.
(1) Cleaning up request packet ID 226 with timestamp +85
(2) Cleaning up request packet ID 227 with timestamp +85
(3) Cleaning up request packet ID 228 with timestamp +85
Waking up in 1.2 seconds.
(4) Cleaning up request packet ID 229 with timestamp +86
Waking up in 0.1 seconds.
(5) Cleaning up request packet ID 230 with timestamp +86
Ready to process requests.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=231,
length=226
User-Name = "{sm=1}test at company.ie"
EAP-Message =
0x0201002a017b736d3d317d6d61676e612e74616c6c616768742e7465737440616972737065
65642e6965
Message-Authenticator = 0x2304870d06de86fa88b3ccd2de56a789
NAS-Identifier = "BTS105"
NAS-IP-Address = 10.190.0.2
Calling-Station-Id = "00-26-82-D0-B6-F6"
WiMAX-BS-Id = 0xffc6c8690100
NAS-Port-Type = Wireless-802.16
Framed-MTU = 2000
Service-Type = Framed-User
WiMAX-GMT-Timezone-offset = 0
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
Attr-26.24757.1.7 = 0x0000028a
(6) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(6) group authorize {
(6) - entering group authorize {...}
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) eap : EAP packet type response id 1 length 42
(6) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(6) [eap] = ok
(6) Found Auth-Type = ?
(6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(6) group authenticate {
(6) - entering group authenticate {...}
(6) eap : EAP Identity
(6) eap : processing type tls
(6) tls : Initiate
(6) tls : Start returned 1
(6) [eap] = handled
Sending Access-Challenge of id 231 to 10.190.0.2 port 1812
EAP-Message = 0x010200061520
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfdcbcc4afdc9d9fe908aaa2f4bb4f780
(6) Finished request 6.
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=232,
length=290
User-Name = "{sm=1}test at company.ie"
EAP-Message =
0x0202005815800000004e16030100490100004503014d6f049b50d6ea950c49e9ddac3c33c4
a0477aefbe9119045fd3313c4148aa9300001e00390038003500160013000a00330032002f00
15001200090014001100080100
Message-Authenticator = 0xab2efdd42f1f345c5b0ff3654e5fbeb1
NAS-Identifier = "BTS105"
NAS-IP-Address = 10.190.0.2
Calling-Station-Id = "00-26-82-D0-B6-F6"
WiMAX-BS-Id = 0xffc6c8690100
NAS-Port-Type = Wireless-802.16
Framed-MTU = 2000
Service-Type = Framed-User
WiMAX-GMT-Timezone-offset = 0
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
Attr-26.24757.1.7 = 0x0000028a
State = 0xfdcbcc4afdc9d9fe908aaa2f4bb4f780
(7) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(7) group authorize {
(7) - entering group authorize {...}
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) eap : EAP packet type response id 2 length 88
(7) eap : Continuing tunnel setup.
(7) [eap] = ok
(7) Found Auth-Type = ?
(7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(7) group authenticate {
(7) - entering group authenticate {...}
(7) eap : Request found, released from the list
(7) eap : EAP/ttls
(7) eap : processing type ttls
(7) ttls : Authenticate
(7) ttls : processing EAP-TLS
TLS Length 78
(7) ttls : Length Included
(7) ttls : eaptls_verify returned 11
(7) ttls : (other): before/accept initialization
(7) ttls : TLS_accept: before/accept initialization
(7) ttls : <<< TLS 1.0 Handshake [length 0049], ClientHello
(7) ttls : TLS_accept: SSLv3 read client hello A
(7) ttls : >>> TLS 1.0 Handshake [length 002a], ServerHello
(7) ttls : TLS_accept: SSLv3 write server hello A
(7) ttls : >>> TLS 1.0 Handshake [length 085e], Certificate
(7) ttls : TLS_accept: SSLv3 write certificate A
(7) ttls : >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange
(7) ttls : TLS_accept: SSLv3 write key exchange A
(7) ttls : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
(7) ttls : TLS_accept: SSLv3 write server done A
(7) ttls : TLS_accept: SSLv3 flush data
(7) ttls : TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
(7) ttls : eaptls_process returned 13
(7) [eap] = handled
Sending Access-Challenge of id 232 to 10.190.0.2 port 1812
EAP-Message =
0x0103040015c000000aad160301002a0200002603014e9ee512e286821d40c5caafa8f5cd1b
8a1ed466ce0608d778ac01ab923d418c00003900160301085e0b00085a0008570003a6308203
a23082028aa003020102020101300d06092a864886f70d0101040500308193310b3009060355
040613024652310f300d060355040813065261646975733112301006035504071309536f6d65
776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886
f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d457861
6d706c6520436572746966696361746520417574686f72697479
EAP-Message =
0x301e170d3131313031333039353734375a170d3132313031323039353734375a307c310b30
09060355040613024652310f300d0603550408130652616469757331153013060355040a130c
4578616d706c6520496e632e312330210603550403131a4578616d706c652053657276657220
43657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d
706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a028201
0100caef6b9b67bdef4ad8e1e44128bc7e4d59b10f7fea2f25a815df34e36e48223a3812b6b4
c9005ddf99cf79afe5a4645eb7847cdaa444ad11ad858447f05e
EAP-Message =
0xbb17624bb71f12a488110b381a1a629f04fe7811e5589b7cfebad4e16d89ce6b982880f28d
b5f6817bda4db85b83520a6d47f682e224f70e9a104fc421ca712b8fa4c1b9e6c98329a5db41
50bb6d06fe29729e2842c5ecb6960b89cbdadc1ec91e7eadbdb4288023659fef46b02ec89bb4
7026e86c85aefb37d6df74167a3e12279d32b42199ba04013f8d4985c218365f0f60c3d9af22
7a3949125925db3ffb1bdccf34548f7626dac63e22b0624b6f16669d47fbc7ca4ddf2f794d00
4b901ecb090203010001a317301530130603551d25040c300a06082b06010505070301300d06
092a864886f70d01010405000382010100b676c0afe25190b575
EAP-Message =
0x1fa8ec975b02e09c61c8b25c4e2b7fe96b9275018524ef5bfecace1625ea8a09aaccc1a0b9
cdb2ebe7d1780ecf6a2bf775d639944c27881d5ea4d6fb013799ca759216777b46ee8dbdd9b6
6346ad9ee5b4e1854f04fa495bc64ce62702c50f3ba637d28c835c3113ca9984a94b1b3e6402
8034c73d734af96bdbb3e7bbb427372fb069af913eb2ced4ef9253a87050138334320cd2f563
c457de969f8472fd861282613fb501a0732e1bc2e9a0eb41caa6cb481c773f79737c1a9bc0e9
5e795ee5a0974fb2752d947606422dfba0e2c45b046c834c0553aecdd2b3a37952050de7a2d6
e27be9065dc29bc10b90188a7faf20beed7b904c0004ab308204
EAP-Message = 0xa73082038fa0030201020209
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfdcbcc4afcc8d9fe908aaa2f4bb4f780
(7) Finished request 7.
Waking up in 0.1 seconds.
rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=233,
length=208
User-Name = "{sm=1}test at company.ie"
EAP-Message = 0x020300061500
Message-Authenticator = 0xe4548d83804e1e53f53cce5d4e69eede
NAS-Identifier = "BTS105"
NAS-IP-Address = 10.190.0.2
Calling-Station-Id = "00-26-82-D0-B6-F6"
WiMAX-BS-Id = 0xffc6c8690100
NAS-Port-Type = Wireless-802.16
Framed-MTU = 2000
Service-Type = Framed-User
WiMAX-GMT-Timezone-offset = 0
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
Attr-26.24757.1.7 = 0x0000028a
State = 0xfdcbcc4afcc8d9fe908aaa2f4bb4f780
(8) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(8) group authorize {
(8) - entering group authorize {...}
(8) [preprocess] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) eap : EAP packet type response id 3 length 6
(8) eap : Continuing tunnel setup.
(8) [eap] = ok
(8) Found Auth-Type = ?
(8) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(8) group authenticate {
(8) - entering group authenticate {...}
(8) eap : Request found, released from the list
(8) eap : EAP/ttls
(8) eap : processing type ttls
(8) ttls : Authenticate
(8) ttls : processing EAP-TLS
(8) ttls : Received TLS ACK
(8) ttls : Received TLS ACK
(8) ttls : ACK handshake fragment handler
(8) ttls : eaptls_verify returned 1
(8) ttls : eaptls_process returned 13
(8) [eap] = handled
Sending Access-Challenge of id 233 to 10.190.0.2 port 1812
EAP-Message =
0x0104040015c000000aad00ec1d720e4a7e8a98300d06092a864886f70d0101050500308193
310b3009060355040613024652310f300d060355040813065261646975733112301006035504
071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e312030
1e06092a864886f70d010901161161646d696e406578616d706c652e636f6d31263024060355
0403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d31
31313031333039353734375a170d3132313031323039353734375a308193310b300906035504
0613024652310f300d0603550408130652616469757331123010
EAP-Message =
0x06035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e
632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d3126
30240603550403131d4578616d706c6520436572746966696361746520417574686f72697479
30820122300d06092a864886f70d01010105000382010f003082010a0282010100be734cc62e
cb7177f45d9f49d0dc7c67f1e8f71f9ad048dd67a12de738c98729d524e687e47b801bf912a3
ce76ff5c35cbbae16eed0733b5e51b53633123803af7f8bdb2a456b82f3c022ab8aa75e09e55
f898044a1de747799af4506d191327f3cb2fd28c87d277828b1b
EAP-Message =
0x5372af25f28e4dc8ece69051878c673e3036fad0165be210ee1e208c762dbd201af930f8d3
0c2d8e1f112afa92bec4462e0f812d645e0572c991a9f1ff3fb7938f9aa1c92db6464ea6025f
c34af023dc152c09ac6074742f3b1766cfca4c352255553bea37de71ea152bb306cd1893e111
19326b7a5bdf957fc90726ffcf49b542285aeda0480ced4f180547fe0449400dfd786fc50203
010001a381fb3081f8301d0603551d0e04160414b57317268d6d7a07453f567b60d8e38ab31a
f2a13081c80603551d230481c03081bd8014b57317268d6d7a07453f567b60d8e38ab31af2a1
a18199a48196308193310b3009060355040613024652310f300d
EAP-Message =
0x060355040813065261646975733112301006035504071309536f6d65776865726531153013
060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d01090116116164
6d696e406578616d706c652e636f6d312630240603550403131d4578616d706c652043657274
6966696361746520417574686f72697479820900ec1d720e4a7e8a98300c0603551d13040530
030101ff300d06092a864886f70d010105050003820101000145888b12dc92a1ae57d9cf122d
90702ccf6fdeacf92f4e46bdab9773d80bb5373ddacd234f03fd8d8f8587b515ba24b28931ff
ec882ad044f8bc07f3c510b90f86e302639082c1d1fbc9fd9d2b
EAP-Message = 0x29f6a43153b63396708d1c2a
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfdcbcc4affcfd9fe908aaa2f4bb4f780
(8) Finished request 8.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list