No connection after access-accept.
Krzysztof Grobelak
kgrobelak at airspeed.ie
Wed Oct 19 17:58:29 CEST 2011
Thank you for quick reply.
I believe that I am using the correct dictionaries
(dictionary.alvarion.wimax.v2_2 && dictionary.wimax.alvarion).
I fixed the TOS range and mask but it still does not connect.
Regards,
Krzysztof
On 19/10/11 16:19, David Peterson wrote:
> Hi Krzystof,
>
> You need to use the new Alvarion dictionary which is included in the 3.0
> version I believe, Alan will undoubtedly correct me.
>
> In addition you will need to change the TOS range and mask values. Here is
> what I send to set up 1 IPCS flow on an Alvarion 4-Motion ASN.
>
> Alvarion-R3-IF-Name += SGVLAN13
> Alvarion-PDFID += 1
> WiMAX-Packet-Data-Flow-Id += 1
> WiMAX-Service-Data-Flow-Id += 1
> WiMAX-Direction += 3
> WiMAX-Transport-Type += 1
> WiMAX-Uplink-QOS-Id += 1
> WiMAX-Downlink-QOS-Id += 1
> WiMAX-ClassifierID += 1
> WiMAX-Classifier-Priority += 1
> WiMAX-Classifier-Direction += 1
> WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x1818FF
> WiMAX-Transport-Type += 1
> WiMAX-ClassifierID += 2
> WiMAX-Classifier-Priority += 1
> WiMAX-Classifier-Direction += 2
> WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x0000FF
> WiMAX-QoS-Id += 1
> WiMAX-Schedule-Type += 2
> WiMAX-Traffic-Priority += 1
> WiMAX-Maximum-Sustained-Traffic-Rate += 256000
>
> David Peterson
> Senior WiMax Engineer
> Wireless Connections
>
> -----Original Message-----
> From:
> freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradius.org
> [mailto:freeradius-users-bounces+david.peterson=acc-corp.net at lists.freeradiu
> s.org] On Behalf Of Krzysztof Grobelak
> Sent: Wednesday, October 19, 2011 11:06 AM
> To: FreeRadius users mailing list
> Subject: No connection after access-accept.
>
> Hello.
>
> I am trying to configure freeradius to work with Alvarion devices. It is
> working fine with Extreme but for some reason it does not work with
> 4motion.
> I installed the "master" version from git and I edited the dictionary
> files.
> My problem is that i see access-accept being sent but the connection is
> not established and radio keeps trying to authenticate with freeradius.
> Each attempt ends with access-accept being sent.
>
> Thanks in advance
> P.S. I am new to freeradius and wimax so please dont eat me alive...
>
> Regards,
> Krzysztof
>
> Debug:
>
> FreeRADIUS Version 3.0.0, for host i686-pc-linux-gnu, built on Oct 17
> 2011 at 10:26:54
> Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE.
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License v2.
>
> Compilation options:
> Regex flavour: Posix
> Starting - reading configuration files ...
> including configuration file /usr/local/etc/raddb/radiusd.conf
> including configuration file /usr/local/etc/raddb/proxy.conf
> including configuration file /usr/local/etc/raddb/clients.conf
> including files in directory /usr/local/etc/raddb/modules/
> including configuration file /usr/local/etc/raddb/modules/redis
> including configuration file /usr/local/etc/raddb/modules/cui
> including configuration file /usr/local/etc/raddb/modules/echo
> including configuration file /usr/local/etc/raddb/modules/checkval
> including configuration file /usr/local/etc/raddb/modules/sql_log
> including configuration file /usr/local/etc/raddb/modules/smsotp
> including configuration file /usr/local/etc/raddb/modules/acct_unique
> including configuration file /usr/local/etc/raddb/modules/policy
> including configuration file /usr/local/etc/raddb/modules/realm
> including configuration file /usr/local/etc/raddb/modules/files
> including configuration file /usr/local/etc/raddb/modules/etc_group
> including configuration file /usr/local/etc/raddb/modules/ippool
> including configuration file /usr/local/etc/raddb/modules/inner-eap
> including configuration file /usr/local/etc/raddb/modules/pam
> including configuration file /usr/local/etc/raddb/modules/sql
> including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf
> including configuration file /usr/local/etc/raddb/modules/counter
> including configuration file /usr/local/etc/raddb/modules/expiration
> including configuration file /usr/local/etc/raddb/modules/detail.log
> including configuration file /usr/local/etc/raddb/modules/expr
> including configuration file /usr/local/etc/raddb/modules/ntlm_auth
> including configuration file /usr/local/etc/raddb/modules/mac2vlan
> including configuration file /usr/local/etc/raddb/modules/detail.example.com
> including configuration file /usr/local/etc/raddb/modules/always
> including configuration file /usr/local/etc/raddb/modules/logintime
> including configuration file /usr/local/etc/raddb/modules/replicate
> including configuration file /usr/local/etc/raddb/modules/unix
> including configuration file /usr/local/etc/raddb/modules/chap
> including configuration file /usr/local/etc/raddb/modules/linelog
> including configuration file /usr/local/etc/raddb/modules/radutmp
> including configuration file /usr/local/etc/raddb/modules/digest
> including configuration file /usr/local/etc/raddb/modules/sradutmp
> including configuration file /usr/local/etc/raddb/modules/preprocess
> including configuration file /usr/local/etc/raddb/modules/ldap
> including configuration file /usr/local/etc/raddb/modules/sqlippool
> including configuration file /usr/local/etc/raddb/sql/postgresql/ippool.conf
> including configuration file /usr/local/etc/raddb/modules/opendirectory
> including configuration file /usr/local/etc/raddb/modules/otp
> including configuration file /usr/local/etc/raddb/modules/rediswho
> including configuration file /usr/local/etc/raddb/modules/mschap
> including configuration file /usr/local/etc/raddb/modules/eap
> including configuration file /usr/local/etc/raddb/modules/attr_rewrite
> including configuration file /usr/local/etc/raddb/modules/exec
> including configuration file /usr/local/etc/raddb/modules/pap
> including configuration file
> /usr/local/etc/raddb/modules/sqlcounter_expire_on_login
> including configuration file /usr/local/etc/raddb/modules/mac2ip
> including configuration file /usr/local/etc/raddb/modules/utf8
> including configuration file /usr/local/etc/raddb/modules/passwd
> including configuration file /usr/local/etc/raddb/modules/attr_filter
> including configuration file /usr/local/etc/raddb/modules/soh
> including configuration file /usr/local/etc/raddb/modules/detail
> including configuration file /usr/local/etc/raddb/modules/smbpasswd
> including configuration file /usr/local/etc/raddb/modules/dynamic_clients
> including configuration file /usr/local/etc/raddb/modules/wimax
> including configuration file /usr/local/etc/raddb/modules/krb5
> including configuration file /usr/local/etc/raddb/modules/perl
> including configuration file /usr/local/etc/raddb/policy.conf
> including files in directory /usr/local/etc/raddb/sites-enabled/
> including configuration file /usr/local/etc/raddb/sites-enabled/default
> including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
> including configuration file
> /usr/local/etc/raddb/sites-enabled/control-socket
> main {
> security {
> allow_core_dumps = no
> }
> }
> including dictionary file /usr/local/etc/raddb/dictionary
> main {
> name = "radiusd"
> prefix = "/usr/local"
> localstatedir = "/usr/local/var"
> sbindir = "/usr/local/sbin"
> logdir = "/usr/local/var/log/radius"
> run_dir = "/usr/local/var/run/radiusd"
> libdir = "/usr/local/lib"
> radacctdir = "/usr/local/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 1024
> pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
> checkrad = "/usr/local/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> }
> security {
> max_attributes = 200
> reject_delay = 1
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = "testing123"
> response_window = 20
> max_outstanding = 65536
> require_message_authenticator = yes
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> num_answers_to_alive = 3
> num_pings_to_alive = 3
> revive_interval = 120
> status_check_timeout = 4
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = "testing123"
> nastype = "other"
> max_connections = 16
> }
> client 10.190.0.2 {
> require_message_authenticator = no
> secret = "pass"
> shortname = "Testing"
> nastype = "other"
> max_connections = 16
> }
>
> radiusd: #### Instantiating modules ####
> instantiate {
> Module: Linked to module rlm_exec
> Module: Instantiating module "exec" from file
> /usr/local/etc/raddb/modules/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> }
> Module: Linked to module rlm_expr
> Module: Instantiating module "expr" from file
> /usr/local/etc/raddb/modules/expr
> Module: Linked to module rlm_expiration
> Module: Instantiating module "expiration" from file
> /usr/local/etc/raddb/modules/expiration
> expiration {
> reply-message = "Password Has Expired "
> }
> Module: Linked to module rlm_logintime
> Module: Instantiating module "logintime" from file
> /usr/local/etc/raddb/modules/logintime
> logintime {
> reply-message = "You are calling outside your allowed timespan "
> minimum-timeout = 60
> }
> }
> radiusd: #### Loading Virtual Servers ####
> server { # from file /usr/local/etc/raddb/radiusd.conf
> modules {
> Module: Checking authenticate {...} for more modules to load
> Module: Linked to module rlm_chap
> Module: Instantiating module "chap" from file
> /usr/local/etc/raddb/modules/chap
> Module: Linked to module rlm_mschap
> Module: Instantiating module "mschap" from file
> /usr/local/etc/raddb/modules/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = no
> passchange {
> }
> allow_retry = yes
> }
> Module: Linked to module rlm_eap
> Module: Instantiating module "eap" from file
> /usr/local/etc/raddb/modules/eap
> eap {
> default_eap_type = "ttls"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 4096
> }
> Module: Linked to sub-module rlm_eap_md5
> Module: Instantiating eap-md5
> Module: Linked to sub-module rlm_eap_leap
> Module: Instantiating eap-leap
> Module: Linked to sub-module rlm_eap_gtc
> Module: Instantiating eap-gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> Module: Linked to sub-module rlm_eap_tls
> Module: Instantiating eap-tls
> tls {
> rsa_key_exchange = no
> dh_key_exchange = yes
> rsa_key_length = 512
> dh_key_length = 512
> verify_depth = 0
> CA_path = "/usr/local/etc/raddb/certs"
> pem_file_type = yes
> private_key_file = "/usr/local/etc/raddb/certs/server.pem"
> certificate_file = "/usr/local/etc/raddb/certs/server.pem"
> CA_file = "/usr/local/etc/raddb/certs/ca.pem"
> private_key_password = "whatever"
> dh_file = "/usr/local/etc/raddb/certs/dh"
> random_file = "/usr/local/etc/raddb/certs/random"
> fragment_size = 1024
> include_length = yes
> check_crl = no
> cipher_list = "DEFAULT"
> make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
> ecdh_curve = "prime256v1"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> }
> }
> Module: Linked to sub-module rlm_eap_ttls
> Module: Instantiating eap-ttls
> ttls {
> default_eap_type = "md5"
> copy_request_to_tunnel = yes
> use_tunneled_reply = yes
> virtual_server = "inner-tunnel"
> include_length = yes
> }
> Module: Linked to sub-module rlm_eap_peap
> Module: Instantiating eap-peap
> peap {
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> }
> Module: Linked to sub-module rlm_eap_mschapv2
> Module: Instantiating eap-mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> Module: Checking authorize {...} for more modules to load
> Module: Linked to module rlm_preprocess
> Module: Instantiating module "preprocess" from file
> /usr/local/etc/raddb/modules/preprocess
> preprocess {
> huntgroups = "/usr/local/etc/raddb/huntgroups"
> hints = "/usr/local/etc/raddb/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> Module: Linked to module rlm_files
> Module: Instantiating module "files" from file
> /usr/local/etc/raddb/modules/files
> files {
> usersfile = "/usr/local/etc/raddb/users"
> acctusersfile = "/usr/local/etc/raddb/acct_users"
> preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
> compat = "no"
> }
> Module: Checking preacct {...} for more modules to load
> Module: Loading virtual module acct_unique
> Module: Linked to module rlm_realm
> Module: Instantiating module "suffix" from file
> /usr/local/etc/raddb/modules/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> Module: Linked to module rlm_wimax
> Module: Instantiating module "wimax" from file
> /usr/local/etc/raddb/modules/wimax
> wimax {
> delete_mppe_keys = no
> }
> Module: Checking accounting {...} for more modules to load
> Module: Linked to module rlm_unix
> Module: Instantiating module "unix" from file
> /usr/local/etc/raddb/modules/unix
> unix {
> radwtmp = "/usr/local/var/log/radius/radwtmp"
> }
> Module: Linked to module rlm_radutmp
> Module: Instantiating module "radutmp" from file
> /usr/local/etc/raddb/modules/radutmp
> radutmp {
> filename = "/usr/local/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> perm = 384
> callerid = yes
> }
> Module: Linked to module rlm_attr_filter
> Module: Instantiating module "attr_filter.accounting_response" from
> file /usr/local/etc/raddb/modules/attr_filter
> attr_filter attr_filter.accounting_response {
> attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> Module: Checking session {...} for more modules to load
> Module: Checking post-proxy {...} for more modules to load
> Module: Checking post-auth {...} for more modules to load
> Module: Instantiating module "attr_filter.access_reject" from file
> /usr/local/etc/raddb/modules/attr_filter
> attr_filter attr_filter.access_reject {
> attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> } # modules
> } # server
> server inner-tunnel { # from file
> /usr/local/etc/raddb/sites-enabled/inner-tunnel
> modules {
> Module: Checking authenticate {...} for more modules to load
> Module: Checking authorize {...} for more modules to load
> Module: Checking session {...} for more modules to load
> Module: Checking post-proxy {...} for more modules to load
> Module: Checking post-auth {...} for more modules to load
> } # modules
> } # server
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> }
> listen {
> type = "control"
> listen {
> socket = "/usr/local/var/run/radiusd/radiusd.sock"
> }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> Listening on authentication address * port 1812
> Listening on accounting address * port 1813
> Listening on command file /usr/local/var/run/radiusd/radiusd.sock
> Listening on authentication address 127.0.0.1 port 18120 as server
> inner-tunnel
> Opening new proxy address * port 1814
> Listening on proxy address * port 1814
> Ready to process requests.
> rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=225,
> length=226
> User-Name = "{sm=1}test at company.ie"
> EAP-Message =
> 0x0201002a017b736d3d317d6d61676e612e74616c6c616768742e7465737440616972737065
> 65642e6965
> Message-Authenticator = 0xb0e4f53c239e82a5a9424643abac90c5
> NAS-Identifier = "BTS105"
> NAS-IP-Address = 10.190.0.2
> Calling-Station-Id = "00-26-82-D0-B6-F6"
> WiMAX-BS-Id = 0xffc6c8690100
> NAS-Port-Type = Wireless-802.16
> Framed-MTU = 2000
> Service-Type = Framed-User
> WiMAX-GMT-Timezone-offset = 0
> WiMAX-Release = "1.0"
> WiMAX-Accounting-Capabilities = IP-Session-Based
> WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
> Attr-26.24757.1.7 = 0x0000028a
> (0) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (0) group authorize {
> (0) - entering group authorize {...}
> (0) [preprocess] = ok
> (0) [chap] = noop
> (0) [mschap] = noop
> (0) eap : EAP packet type response id 1 length 42
> (0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
> rest of authorize
> (0) [eap] = ok
> (0) Found Auth-Type = ?
> (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (0) group authenticate {
> (0) - entering group authenticate {...}
> (0) eap : EAP Identity
> (0) eap : processing type tls
> (0) tls : Initiate
> (0) tls : Start returned 1
> (0) [eap] = handled
> Sending Access-Challenge of id 225 to 10.190.0.2 port 1812
> EAP-Message = 0x010200061520
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x4524932a452686bf0e6f9b30d966adf3
> (0) Finished request 0.
> Waking up in 0.3 seconds.
> rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=226,
> length=290
> User-Name = "{sm=1}test at company.ie"
> EAP-Message =
> 0x0202005815800000004e16030100490100004503014d6f0492446dcf37684a8ba3964276e6
> a0af14e11c0c66ba0bfe09bee47296d900001e00390038003500160013000a00330032002f00
> 15001200090014001100080100
> Message-Authenticator = 0x16b9a8766e5ca7d66bd4109f08badf56
> NAS-Identifier = "BTS105"
> NAS-IP-Address = 10.190.0.2
> Calling-Station-Id = "00-26-82-D0-B6-F6"
> WiMAX-BS-Id = 0xffc6c8690100
> NAS-Port-Type = Wireless-802.16
> Framed-MTU = 2000
> Service-Type = Framed-User
> WiMAX-GMT-Timezone-offset = 0
> WiMAX-Release = "1.0"
> WiMAX-Accounting-Capabilities = IP-Session-Based
> WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
> Attr-26.24757.1.7 = 0x0000028a
> State = 0x4524932a452686bf0e6f9b30d966adf3
> (1) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (1) group authorize {
> (1) - entering group authorize {...}
> (1) [preprocess] = ok
> (1) [chap] = noop
> (1) [mschap] = noop
> (1) eap : EAP packet type response id 2 length 88
> (1) eap : Continuing tunnel setup.
> (1) [eap] = ok
> (1) Found Auth-Type = ?
> (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (1) group authenticate {
> (1) - entering group authenticate {...}
> (1) eap : Request found, released from the list
> (1) eap : EAP/ttls
> (1) eap : processing type ttls
> (1) ttls : Authenticate
> (1) ttls : processing EAP-TLS
> TLS Length 78
> (1) ttls : Length Included
> (1) ttls : eaptls_verify returned 11
> (1) ttls : (other): before/accept initialization
> (1) ttls : TLS_accept: before/accept initialization
> (1) ttls :<<< TLS 1.0 Handshake [length 0049], ClientHello
> (1) ttls : TLS_accept: SSLv3 read client hello A
> (1) ttls :>>> TLS 1.0 Handshake [length 002a], ServerHello
> (1) ttls : TLS_accept: SSLv3 write server hello A
> (1) ttls :>>> TLS 1.0 Handshake [length 085e], Certificate
> (1) ttls : TLS_accept: SSLv3 write certificate A
> (1) ttls :>>> TLS 1.0 Handshake [length 020d], ServerKeyExchange
> (1) ttls : TLS_accept: SSLv3 write key exchange A
> (1) ttls :>>> TLS 1.0 Handshake [length 0004], ServerHelloDone
> (1) ttls : TLS_accept: SSLv3 write server done A
> (1) ttls : TLS_accept: SSLv3 flush data
> (1) ttls : TLS_accept: Need to read more data: SSLv3 read client
> certificate A
> In SSL Handshake Phase
> In SSL Accept mode
> (1) ttls : eaptls_process returned 13
> (1) [eap] = handled
> Sending Access-Challenge of id 226 to 10.190.0.2 port 1812
> EAP-Message =
> 0x0103040015c000000aad160301002a0200002603014e9ee50972fa598b689b6f459a90c557
> abd4de3970630ee299ae5a309acdf4ec00003900160301085e0b00085a0008570003a6308203
> a23082028aa003020102020101300d06092a864886f70d0101040500308193310b3009060355
> 040613024652310f300d060355040813065261646975733112301006035504071309536f6d65
> 776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886
> f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d457861
> 6d706c6520436572746966696361746520417574686f72697479
> EAP-Message =
> 0x301e170d3131313031333039353734375a170d3132313031323039353734375a307c310b30
> 09060355040613024652310f300d0603550408130652616469757331153013060355040a130c
> 4578616d706c6520496e632e312330210603550403131a4578616d706c652053657276657220
> 43657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d
> 706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a028201
> 0100caef6b9b67bdef4ad8e1e44128bc7e4d59b10f7fea2f25a815df34e36e48223a3812b6b4
> c9005ddf99cf79afe5a4645eb7847cdaa444ad11ad858447f05e
> EAP-Message =
> 0xbb17624bb71f12a488110b381a1a629f04fe7811e5589b7cfebad4e16d89ce6b982880f28d
> b5f6817bda4db85b83520a6d47f682e224f70e9a104fc421ca712b8fa4c1b9e6c98329a5db41
> 50bb6d06fe29729e2842c5ecb6960b89cbdadc1ec91e7eadbdb4288023659fef46b02ec89bb4
> 7026e86c85aefb37d6df74167a3e12279d32b42199ba04013f8d4985c218365f0f60c3d9af22
> 7a3949125925db3ffb1bdccf34548f7626dac63e22b0624b6f16669d47fbc7ca4ddf2f794d00
> 4b901ecb090203010001a317301530130603551d25040c300a06082b06010505070301300d06
> 092a864886f70d01010405000382010100b676c0afe25190b575
> EAP-Message =
> 0x1fa8ec975b02e09c61c8b25c4e2b7fe96b9275018524ef5bfecace1625ea8a09aaccc1a0b9
> cdb2ebe7d1780ecf6a2bf775d639944c27881d5ea4d6fb013799ca759216777b46ee8dbdd9b6
> 6346ad9ee5b4e1854f04fa495bc64ce62702c50f3ba637d28c835c3113ca9984a94b1b3e6402
> 8034c73d734af96bdbb3e7bbb427372fb069af913eb2ced4ef9253a87050138334320cd2f563
> c457de969f8472fd861282613fb501a0732e1bc2e9a0eb41caa6cb481c773f79737c1a9bc0e9
> 5e795ee5a0974fb2752d947606422dfba0e2c45b046c834c0553aecdd2b3a37952050de7a2d6
> e27be9065dc29bc10b90188a7faf20beed7b904c0004ab308204
> EAP-Message = 0xa73082038fa0030201020209
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x4524932a442786bf0e6f9b30d966adf3
> (1) Finished request 1.
> Waking up in 0.1 seconds.
> rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=227,
> length=208
> User-Name = "{sm=1}test at company.ie"
> EAP-Message = 0x020300061500
> Message-Authenticator = 0x9a77a1ab1819f89e18fb8f7a8d263dbc
> NAS-Identifier = "BTS105"
> NAS-IP-Address = 10.190.0.2
> Calling-Station-Id = "00-26-82-D0-B6-F6"
> WiMAX-BS-Id = 0xffc6c8690100
> NAS-Port-Type = Wireless-802.16
> Framed-MTU = 2000
> Service-Type = Framed-User
> WiMAX-GMT-Timezone-offset = 0
> WiMAX-Release = "1.0"
> WiMAX-Accounting-Capabilities = IP-Session-Based
> WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
> Attr-26.24757.1.7 = 0x0000028a
> State = 0x4524932a442786bf0e6f9b30d966adf3
> (2) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (2) group authorize {
> (2) - entering group authorize {...}
> (2) [preprocess] = ok
> (2) [chap] = noop
> (2) [mschap] = noop
> (2) eap : EAP packet type response id 3 length 6
> (2) eap : Continuing tunnel setup.
> (2) [eap] = ok
> (2) Found Auth-Type = ?
> (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (2) group authenticate {
> (2) - entering group authenticate {...}
> (2) eap : Request found, released from the list
> (2) eap : EAP/ttls
> (2) eap : processing type ttls
> (2) ttls : Authenticate
> (2) ttls : processing EAP-TLS
> (2) ttls : Received TLS ACK
> (2) ttls : Received TLS ACK
> (2) ttls : ACK handshake fragment handler
> (2) ttls : eaptls_verify returned 1
> (2) ttls : eaptls_process returned 13
> (2) [eap] = handled
> Sending Access-Challenge of id 227 to 10.190.0.2 port 1812
> EAP-Message =
> 0x0104040015c000000aad00ec1d720e4a7e8a98300d06092a864886f70d0101050500308193
> 310b3009060355040613024652310f300d060355040813065261646975733112301006035504
> 071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e312030
> 1e06092a864886f70d010901161161646d696e406578616d706c652e636f6d31263024060355
> 0403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d31
> 31313031333039353734375a170d3132313031323039353734375a308193310b300906035504
> 0613024652310f300d0603550408130652616469757331123010
> EAP-Message =
> 0x06035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e
> 632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d3126
> 30240603550403131d4578616d706c6520436572746966696361746520417574686f72697479
> 30820122300d06092a864886f70d01010105000382010f003082010a0282010100be734cc62e
> cb7177f45d9f49d0dc7c67f1e8f71f9ad048dd67a12de738c98729d524e687e47b801bf912a3
> ce76ff5c35cbbae16eed0733b5e51b53633123803af7f8bdb2a456b82f3c022ab8aa75e09e55
> f898044a1de747799af4506d191327f3cb2fd28c87d277828b1b
> EAP-Message =
> 0x5372af25f28e4dc8ece69051878c673e3036fad0165be210ee1e208c762dbd201af930f8d3
> 0c2d8e1f112afa92bec4462e0f812d645e0572c991a9f1ff3fb7938f9aa1c92db6464ea6025f
> c34af023dc152c09ac6074742f3b1766cfca4c352255553bea37de71ea152bb306cd1893e111
> 19326b7a5bdf957fc90726ffcf49b542285aeda0480ced4f180547fe0449400dfd786fc50203
> 010001a381fb3081f8301d0603551d0e04160414b57317268d6d7a07453f567b60d8e38ab31a
> f2a13081c80603551d230481c03081bd8014b57317268d6d7a07453f567b60d8e38ab31af2a1
> a18199a48196308193310b3009060355040613024652310f300d
> EAP-Message =
> 0x060355040813065261646975733112301006035504071309536f6d65776865726531153013
> 060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d01090116116164
> 6d696e406578616d706c652e636f6d312630240603550403131d4578616d706c652043657274
> 6966696361746520417574686f72697479820900ec1d720e4a7e8a98300c0603551d13040530
> 030101ff300d06092a864886f70d010105050003820101000145888b12dc92a1ae57d9cf122d
> 90702ccf6fdeacf92f4e46bdab9773d80bb5373ddacd234f03fd8d8f8587b515ba24b28931ff
> ec882ad044f8bc07f3c510b90f86e302639082c1d1fbc9fd9d2b
> EAP-Message = 0x29f6a43153b63396708d1c2a
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x4524932a472086bf0e6f9b30d966adf3
> (2) Finished request 2.
> rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=228,
> length=208
> User-Name = "{sm=1}test at company.ie"
> EAP-Message = 0x020400061500
> Message-Authenticator = 0xe3f7dbd13796664921230156fd4a7f0b
> NAS-Identifier = "BTS105"
> NAS-IP-Address = 10.190.0.2
> Calling-Station-Id = "00-26-82-D0-B6-F6"
> WiMAX-BS-Id = 0xffc6c8690100
> NAS-Port-Type = Wireless-802.16
> Framed-MTU = 2000
> Service-Type = Framed-User
> WiMAX-GMT-Timezone-offset = 0
> WiMAX-Release = "1.0"
> WiMAX-Accounting-Capabilities = IP-Session-Based
> WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
> Attr-26.24757.1.7 = 0x0000028a
> State = 0x4524932a472086bf0e6f9b30d966adf3
> (3) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (3) group authorize {
> (3) - entering group authorize {...}
> (3) [preprocess] = ok
> (3) [chap] = noop
> (3) [mschap] = noop
> (3) eap : EAP packet type response id 4 length 6
> (3) eap : Continuing tunnel setup.
> (3) [eap] = ok
> (3) Found Auth-Type = ?
> (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (3) group authenticate {
> (3) - entering group authenticate {...}
> (3) eap : Request found, released from the list
> (3) eap : EAP/ttls
> (3) eap : processing type ttls
> (3) ttls : Authenticate
> (3) ttls : processing EAP-TLS
> (3) ttls : Received TLS ACK
> (3) ttls : Received TLS ACK
> (3) ttls : ACK handshake fragment handler
> (3) ttls : eaptls_verify returned 1
> (3) ttls : eaptls_process returned 13
> (3) [eap] = handled
> Sending Access-Challenge of id 228 to 10.190.0.2 port 1812
> EAP-Message =
> 0x010502cb158000000aad6b687c3b13bd2cbcdc94906e01fea4a72a53605631056850f7c340
> 7a5d7b7a88d58a990667955f91c7e7fd1d4bcc1cb32597585648a06987428bb59b80040251ea
> 1eb36ca37e6b08d6dcff0bbac544ee590b97dcdd3043216a8d7c43b3b8177a6d50c34a1954b7
> 97f6ce1b83260aec1f9cd4f49b89bf166b6fcbe2169a6cdfdd381bfdc0210904a4332192d206
> d220b4227586268fe877dec3e39b6c9cfa223f5af7f750fd76160301020d0c0002090080f261
> ea67ca98641e7618ffeaf9dbfbfeba8524299d1674bbae7d654b45ddb4d4d56cfc334a0d31a3
> 3b07a51ec227e83c6111384da4c513b3799894ab435ab01f0308
> EAP-Message =
> 0xbae422a62095161d878138f148293e9d8bbdd8e1f17eeb6aea213178d729efd10049433c42
> 9ea9685564ff39a81b78828cd381e4ebb6ff4a2022e92349230001020080cf073ac84159ffdf
> 2a3954bc6d8c5b241548eef76ea49c6f5648bf586017e4f8038d6956580fa5bd17a7199c7b05
> bec37333162d8c6302c80092a8339aaecdcd44d3f77964b938c579d2fe5f5e2eb90d52b0215d
> ec2972f639283ac415d95b1aecb8d856e28eababe9ee8f662b385efb60b09741356027269b5a
> 089c7c85738001004c76e655fcfb777d949b3e64e0018f329eedb978f1294c0f4fe10736b52d
> f39df6edf0f5634de3dc17614893582df2e251c5b6acd61276d0
> EAP-Message =
> 0xb71e3de49e55f6775effac0d28046d1510714dbd68c4d55dedb7329f9ba3de55154a4ffd8d
> 2aad7081dc07b232ff609ca8c19743ba19ccd2d1b3bf35dd1ccd78c1d54f477a4336188fb929
> 8426a941501972562ed1fca0efad8c451b0ec15674ff86500e67617241c95625ddecc82feefc
> 41c0eb91cdab0cc56176884e28aab3c850a81bd7736e1ec133d6b83db28db10623c552c5f7a2
> d7a6d59e0f1cf362b155e415a274088d2eb875d07acd63236660e40f200f6055bd2c0c934777
> c61d55c1a57d7983d867c016030100040e000000
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x4524932a462186bf0e6f9b30d966adf3
> (3) Finished request 3.
> Waking up in 0.2 seconds.
> Waking up in 4.3 seconds.
> rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=229,
> length=410
> User-Name = "{sm=1}test at company.ie"
> EAP-Message =
> 0x020500d01580000000c61603010086100000820080e3190ec3957550a29a5f545907823a1e
> adcd83d25d26b74f1858aae52bac948aef1e3d75bc2adff031a57ad656d2d09066f0cae0630e
> 0c66d0487abc980cb7d6631a6531f05cba19b4a94f628a6bda9a90aae7e58f33fe204399f1fc
> d215d007dba697579f7bcb002baa5d67c06a10d82953c53a31b100711f4f0d07e550a3d41403
> 0100010116030100308a7e900fbfb4f5de1ef3c91092938dee297c5a4b41f537309996762989
> cffc3aa2475130e85a6cfcbd3cc5d4f4a38b01
> Message-Authenticator = 0x4f4cb9ffdb83cca6564a6d11de9eca5e
> NAS-Identifier = "BTS105"
> NAS-IP-Address = 10.190.0.2
> Calling-Station-Id = "00-26-82-D0-B6-F6"
> WiMAX-BS-Id = 0xffc6c8690100
> NAS-Port-Type = Wireless-802.16
> Framed-MTU = 2000
> Service-Type = Framed-User
> WiMAX-GMT-Timezone-offset = 0
> WiMAX-Release = "1.0"
> WiMAX-Accounting-Capabilities = IP-Session-Based
> WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
> Attr-26.24757.1.7 = 0x0000028a
> State = 0x4524932a462186bf0e6f9b30d966adf3
> (4) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (4) group authorize {
> (4) - entering group authorize {...}
> (4) [preprocess] = ok
> (4) [chap] = noop
> (4) [mschap] = noop
> (4) eap : EAP packet type response id 5 length 208
> (4) eap : Continuing tunnel setup.
> (4) [eap] = ok
> (4) Found Auth-Type = ?
> (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (4) group authenticate {
> (4) - entering group authenticate {...}
> (4) eap : Request found, released from the list
> (4) eap : EAP/ttls
> (4) eap : processing type ttls
> (4) ttls : Authenticate
> (4) ttls : processing EAP-TLS
> TLS Length 198
> (4) ttls : Length Included
> (4) ttls : eaptls_verify returned 11
> (4) ttls :<<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
> (4) ttls : TLS_accept: SSLv3 read client key exchange A
> (4) ttls :<<< TLS 1.0 ChangeCipherSpec [length 0001]
> (4) ttls :<<< TLS 1.0 Handshake [length 0010], Finished
> (4) ttls : TLS_accept: SSLv3 read finished A
> (4) ttls :>>> TLS 1.0 ChangeCipherSpec [length 0001]
> (4) ttls : TLS_accept: SSLv3 write change cipher spec A
> (4) ttls :>>> TLS 1.0 Handshake [length 0010], Finished
> (4) ttls : TLS_accept: SSLv3 write finished A
> (4) ttls : TLS_accept: SSLv3 flush data
> (4) ttls : (other): SSL negotiation finished successfully
> SSL Connection Established
> (4) ttls : eaptls_process returned 13
> (4) [eap] = handled
> Sending Access-Challenge of id 229 to 10.190.0.2 port 1812
> EAP-Message =
> 0x0106004515800000003b14030100010116030100303a882b92af53c50ce085959593e73fca
> 32ab9a7bd2e2e0a895c165c0a4163a638e8f12fef6f0bc8878a70cfcda0548a8
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0x4524932a412286bf0e6f9b30d966adf3
> (4) Finished request 4.
> Waking up in 0.2 seconds.
> rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=230,
> length=378
> User-Name = "{sm=1test at company.ie"
> EAP-Message =
> 0x020600b0150017030100201783b2821501d183457ee81425c3bcbfd372c1207cc52b44e4af
> 3250a771e4181703010080a65edf5e1fddb09f70ebffef22b5811ebb4d7f3143b2d1ecf88e2a
> f29edd0178dc38aa45de3e8ac0106fa7259392dbb721ed242bf6fd1a79cdc10faad024b583e8
> 710f2396246d34353b915f3a49771b11ed93e106564b0f94f208631a4f9852c21452c53492d5
> 302b2571ec8f1b95d0b1abdaf202da0f42b9b68c863653886c
> Message-Authenticator = 0x064bdfc96ada80a4ac9a92242232b9ae
> NAS-Identifier = "BTS105"
> NAS-IP-Address = 10.190.0.2
> Calling-Station-Id = "00-26-82-D0-B6-F6"
> WiMAX-BS-Id = 0xffc6c8690100
> NAS-Port-Type = Wireless-802.16
> Framed-MTU = 2000
> Service-Type = Framed-User
> WiMAX-GMT-Timezone-offset = 0
> WiMAX-Release = "1.0"
> WiMAX-Accounting-Capabilities = IP-Session-Based
> WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
> Attr-26.24757.1.7 = 0x0000028a
> State = 0x4524932a412286bf0e6f9b30d966adf3
> (5) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (5) group authorize {
> (5) - entering group authorize {...}
> (5) [preprocess] = ok
> (5) [chap] = noop
> (5) [mschap] = noop
> (5) eap : EAP packet type response id 6 length 176
> (5) eap : Continuing tunnel setup.
> (5) [eap] = ok
> (5) Found Auth-Type = ?
> (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (5) group authenticate {
> (5) - entering group authenticate {...}
> (5) eap : Request found, released from the list
> (5) eap : EAP/ttls
> (5) eap : processing type ttls
> (5) ttls : Authenticate
> (5) ttls : processing EAP-TLS
> (5) ttls : eaptls_verify returned 7
> (5) ttls : Done initial handshake
> (5) ttls : eaptls_process returned 7
> (5) ttls : Session established. Proceeding to decode tunneled attributes.
> (5) ttls : Got tunneled request
> User-Name = "30001020"
> MS-CHAP-Challenge = 0x967d3f6435e31b63
> MS-CHAP-Response =
> 0xb801000000000000000000000000000000000000000000000000b32723b5ce6e52ba066370
> add032fa03fecc6350d759fa7f
> FreeRADIUS-Proxied-To = 127.0.0.1
> (5) ttls : Sending tunneled request
> User-Name = "30001020"
> MS-CHAP-Challenge = 0x967d3f6435e31b63
> MS-CHAP-Response =
> 0xb801000000000000000000000000000000000000000000000000b32723b5ce6e52ba066370
> add032fa03fecc6350d759fa7f
> FreeRADIUS-Proxied-To = 127.0.0.1
> NAS-Identifier = "BTS105"
> NAS-IP-Address = 10.190.0.2
> Calling-Station-Id = "00-26-82-D0-B6-F6"
> WiMAX-BS-Id = 0xffc6c8690100
> NAS-Port-Type = Wireless-802.16
> Framed-MTU = 2000
> Service-Type = Framed-User
> WiMAX-Release = "1.0"
> WiMAX-Accounting-Capabilities = IP-Session-Based
> WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
> Attr-26.24757.1.7 = 0x0000028a
> server inner-tunnel {
> (5) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/inner-tunnel
> (5) group authorize {
> (5) - entering group authorize {...}
> (5) [chap] = noop
> (5) mschap : Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
> (5) [mschap] = ok
> (5) eap : No EAP-Message, not doing EAP
> (5) [eap] = noop
> (5) files : users: Matched entry 30001020 at line 99
> (5) [files] = ok
> (5) [preprocess] = ok
> (5) Found Auth-Type = ?
> (5) # Executing group from file
> /usr/local/etc/raddb/sites-enabled/inner-tunnel
> (5) group MS-CHAP {
> (5) - entering group MS-CHAP {...}
> (5) mschap : Told to do MS-CHAPv1 with NT-Password
> (5) mschap : adding MS-CHAPv1 MPPE keys
> (5) [mschap] = ok
> (5) # Executing section post-auth from file
> /usr/local/etc/raddb/sites-enabled/inner-tunnel
> (5) group post-auth {
> (5) - entering group post-auth {...}
> (5) update outer.reply {
> (5) expand: %{request:User-Name} -> 30001020
> (5) } # update outer.reply = noop
> (5) wimax : No EAP-MSK or EAP-EMSK. Cannot create WiMAX keys.
> (5) [wimax] = noop
> } # server inner-tunnel
> (5) ttls : Got tunneled reply code 2
> Alvarion-R3-IF-Name += "CPEL3Mgmt"
> Alvarion-PDFID += 1
> WiMAX-Packet-Data-Flow-Id += 1
> WiMAX-Direction += Bi-Directional
> WiMAX-Transport-Type += IPv4-CS
> WiMAX-Uplink-QOS-Id += 1
> WiMAX-Downlink-QOS-Id += 1
> WiMAX-ClassifierID += 2
> WiMAX-Classifier-Priority += 1
> WiMAX-Classifier-Direction += IN
> WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x31353739323633
> WiMAX-ClassifierID += 1
> WiMAX-Classifier-Priority += 1
> WiMAX-Classifier-Direction += OUT
> WiMAX-IP-TOS-DSCP-Range-and-Mask += 0x3635353335
> WiMAX-QoS-Id += 1
> WiMAX-Schedule-Type += Best-Effort
> WiMAX-Traffic-Priority += 4
> WiMAX-Maximum-Sustained-Traffic-Rate += 512000
> WiMAX-IP-Technology += PMIP4
> Alvarion-R3-IF-Name += "HazelL2Service"
> Alvarion-PDFID += 2
> WiMAX-Packet-Data-Flow-Id += 2
> WiMAX-Direction += Bi-Directional
> WiMAX-Transport-Type += Ethernet
> WiMAX-Uplink-QOS-Id += 2
> WiMAX-Downlink-QOS-Id += 2
> WiMAX-ClassifierID += 1
> WiMAX-Classifier-Priority += 1
> WiMAX-Classifier-Direction += Bi-Directional
> WiMAX-VLAN-ID += 175
> WiMAX-QoS-Id += 2
> WiMAX-Schedule-Type += nrtPS
> WiMAX-Traffic-Priority += 1
> WiMAX-Maximum-Sustained-Traffic-Rate += 4096000
> WiMAX-Minimum-Reserved-Traffic-Rate += 1024000
> WiMAX-IP-Technology += Ethernet-CS
> WiMAX-hHA-IP-MIP4 += 12.12.12.12
> Session-Timeout = 3600
> Reply-Message = "4motion test"
> MS-CHAP-MPPE-Keys =
> 0x250838025ed089c5740e1ec19c1d0bedd9776bd85e9fca880000000000000000
> MS-MPPE-Encryption-Policy = Encryption-Allowed
> MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
> (5) ttls : Got tunneled Access-Accept
> (5) eap : Freeing handler
> (5) [eap] = ok
> (5) # Executing section post-auth from file
> /usr/local/etc/raddb/sites-enabled/default
> (5) group post-auth {
> (5) - entering group post-auth {...}
> (5) update request {
> (5) expand: %{User-Name} -> {sm=1}test at company.ie
> (5) } # update request = noop
> (5) update reply {
> (5) expand: %{reply:EAP-MSK} ->
> 0x1fb12ddd1fa37055e2178c1525d32d189d720d0987006686a6a5306992df472e3c1a0fade5
> 9132dd591aed447610e20c90a230fa5e7e345461261f8893588691
> (5) } # update reply = noop
> (5) wimax : MIP-RK =
> 0x34cb0114be346973d5832ba7410516ed882d1fb1fb0ae3ad608e687c48b01ab6948fd63668
> f8d0e5fbdb1c3169e676b44aea80064919ae759cc997505584dbf7
> (5) wimax : MIP-SPI = dd1974b7
> (5) [wimax] = updated
> Sending Access-Accept of id 230 to 10.190.0.2 port 1812
> User-Name = "30001020"
> Alvarion-R3-IF-Name = "CPEL3Mgmt"
> Alvarion-PDFID = 1
> WiMAX-Packet-Data-Flow-Id = 1
> WiMAX-Direction = Bi-Directional
> WiMAX-Transport-Type = IPv4-CS
> WiMAX-Uplink-QOS-Id = 1
> WiMAX-Downlink-QOS-Id = 1
> WiMAX-ClassifierID = 2
> WiMAX-Classifier-Priority = 1
> WiMAX-Classifier-Direction = IN
> WiMAX-IP-TOS-DSCP-Range-and-Mask = 0x31353739323633
> WiMAX-ClassifierID = 1
> WiMAX-Classifier-Priority = 1
> WiMAX-Classifier-Direction = OUT
> WiMAX-IP-TOS-DSCP-Range-and-Mask = 0x3635353335
> WiMAX-QoS-Id = 1
> WiMAX-Schedule-Type = Best-Effort
> WiMAX-Traffic-Priority = 4
> WiMAX-Maximum-Sustained-Traffic-Rate = 512000
> WiMAX-IP-Technology = Ethernet-CS
> Alvarion-R3-IF-Name = "HazelL2Service"
> Alvarion-PDFID = 2
> WiMAX-Packet-Data-Flow-Id = 2
> WiMAX-Direction = Bi-Directional
> WiMAX-Transport-Type = Ethernet
> WiMAX-Uplink-QOS-Id = 2
> WiMAX-Downlink-QOS-Id = 2
> WiMAX-ClassifierID = 1
> WiMAX-Classifier-Priority = 1
> WiMAX-Classifier-Direction = Bi-Directional
> WiMAX-VLAN-ID = 175
> WiMAX-QoS-Id = 2
> WiMAX-Schedule-Type = nrtPS
> WiMAX-Traffic-Priority = 1
> WiMAX-Maximum-Sustained-Traffic-Rate = 4096000
> WiMAX-Minimum-Reserved-Traffic-Rate = 1024000
> WiMAX-IP-Technology = Ethernet-CS
> WiMAX-hHA-IP-MIP4 = 12.12.12.12
> Session-Timeout = 3600
> Reply-Message = "4motion test"
> MS-CHAP-MPPE-Keys =
> 0x250838025ed089c5740e1ec19c1d0bedd9776bd85e9fca880000000000000000
> MS-MPPE-Encryption-Policy = Encryption-Allowed
> MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
> MS-MPPE-Recv-Key =
> 0x1fb12ddd1fa37055e2178c1525d32d189d720d0987006686a6a5306992df472e
> MS-MPPE-Send-Key =
> 0x3c1a0fade59132dd591aed447610e20c90a230fa5e7e345461261f8893588691
> EAP-Message = 0x03060004
> Message-Authenticator = 0x00000000000000000000000000000000
> WiMAX-MSK =
> 0x1fb12ddd1fa37055e2178c1525d32d189d720d0987006686a6a5306992df472e3c1a0fade5
> 9132dd591aed447610e20c90a230fa5e7e345461261f8893588691
> (5) Finished request 5.
> Waking up in 0.1 seconds.
> Waking up in 0.1 seconds.
> Waking up in 2.9 seconds.
> (0) Cleaning up request packet ID 225 with timestamp +85
> Waking up in 0.1 seconds.
> (1) Cleaning up request packet ID 226 with timestamp +85
> (2) Cleaning up request packet ID 227 with timestamp +85
> (3) Cleaning up request packet ID 228 with timestamp +85
> Waking up in 1.2 seconds.
> (4) Cleaning up request packet ID 229 with timestamp +86
> Waking up in 0.1 seconds.
> (5) Cleaning up request packet ID 230 with timestamp +86
> Ready to process requests.
> rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=231,
> length=226
> User-Name = "{sm=1}test at company.ie"
> EAP-Message =
> 0x0201002a017b736d3d317d6d61676e612e74616c6c616768742e7465737440616972737065
> 65642e6965
> Message-Authenticator = 0x2304870d06de86fa88b3ccd2de56a789
> NAS-Identifier = "BTS105"
> NAS-IP-Address = 10.190.0.2
> Calling-Station-Id = "00-26-82-D0-B6-F6"
> WiMAX-BS-Id = 0xffc6c8690100
> NAS-Port-Type = Wireless-802.16
> Framed-MTU = 2000
> Service-Type = Framed-User
> WiMAX-GMT-Timezone-offset = 0
> WiMAX-Release = "1.0"
> WiMAX-Accounting-Capabilities = IP-Session-Based
> WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
> Attr-26.24757.1.7 = 0x0000028a
> (6) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (6) group authorize {
> (6) - entering group authorize {...}
> (6) [preprocess] = ok
> (6) [chap] = noop
> (6) [mschap] = noop
> (6) eap : EAP packet type response id 1 length 42
> (6) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
> rest of authorize
> (6) [eap] = ok
> (6) Found Auth-Type = ?
> (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (6) group authenticate {
> (6) - entering group authenticate {...}
> (6) eap : EAP Identity
> (6) eap : processing type tls
> (6) tls : Initiate
> (6) tls : Start returned 1
> (6) [eap] = handled
> Sending Access-Challenge of id 231 to 10.190.0.2 port 1812
> EAP-Message = 0x010200061520
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xfdcbcc4afdc9d9fe908aaa2f4bb4f780
> (6) Finished request 6.
> Waking up in 0.3 seconds.
> rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=232,
> length=290
> User-Name = "{sm=1}test at company.ie"
> EAP-Message =
> 0x0202005815800000004e16030100490100004503014d6f049b50d6ea950c49e9ddac3c33c4
> a0477aefbe9119045fd3313c4148aa9300001e00390038003500160013000a00330032002f00
> 15001200090014001100080100
> Message-Authenticator = 0xab2efdd42f1f345c5b0ff3654e5fbeb1
> NAS-Identifier = "BTS105"
> NAS-IP-Address = 10.190.0.2
> Calling-Station-Id = "00-26-82-D0-B6-F6"
> WiMAX-BS-Id = 0xffc6c8690100
> NAS-Port-Type = Wireless-802.16
> Framed-MTU = 2000
> Service-Type = Framed-User
> WiMAX-GMT-Timezone-offset = 0
> WiMAX-Release = "1.0"
> WiMAX-Accounting-Capabilities = IP-Session-Based
> WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
> Attr-26.24757.1.7 = 0x0000028a
> State = 0xfdcbcc4afdc9d9fe908aaa2f4bb4f780
> (7) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (7) group authorize {
> (7) - entering group authorize {...}
> (7) [preprocess] = ok
> (7) [chap] = noop
> (7) [mschap] = noop
> (7) eap : EAP packet type response id 2 length 88
> (7) eap : Continuing tunnel setup.
> (7) [eap] = ok
> (7) Found Auth-Type = ?
> (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (7) group authenticate {
> (7) - entering group authenticate {...}
> (7) eap : Request found, released from the list
> (7) eap : EAP/ttls
> (7) eap : processing type ttls
> (7) ttls : Authenticate
> (7) ttls : processing EAP-TLS
> TLS Length 78
> (7) ttls : Length Included
> (7) ttls : eaptls_verify returned 11
> (7) ttls : (other): before/accept initialization
> (7) ttls : TLS_accept: before/accept initialization
> (7) ttls :<<< TLS 1.0 Handshake [length 0049], ClientHello
> (7) ttls : TLS_accept: SSLv3 read client hello A
> (7) ttls :>>> TLS 1.0 Handshake [length 002a], ServerHello
> (7) ttls : TLS_accept: SSLv3 write server hello A
> (7) ttls :>>> TLS 1.0 Handshake [length 085e], Certificate
> (7) ttls : TLS_accept: SSLv3 write certificate A
> (7) ttls :>>> TLS 1.0 Handshake [length 020d], ServerKeyExchange
> (7) ttls : TLS_accept: SSLv3 write key exchange A
> (7) ttls :>>> TLS 1.0 Handshake [length 0004], ServerHelloDone
> (7) ttls : TLS_accept: SSLv3 write server done A
> (7) ttls : TLS_accept: SSLv3 flush data
> (7) ttls : TLS_accept: Need to read more data: SSLv3 read client
> certificate A
> In SSL Handshake Phase
> In SSL Accept mode
> (7) ttls : eaptls_process returned 13
> (7) [eap] = handled
> Sending Access-Challenge of id 232 to 10.190.0.2 port 1812
> EAP-Message =
> 0x0103040015c000000aad160301002a0200002603014e9ee512e286821d40c5caafa8f5cd1b
> 8a1ed466ce0608d778ac01ab923d418c00003900160301085e0b00085a0008570003a6308203
> a23082028aa003020102020101300d06092a864886f70d0101040500308193310b3009060355
> 040613024652310f300d060355040813065261646975733112301006035504071309536f6d65
> 776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886
> f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d457861
> 6d706c6520436572746966696361746520417574686f72697479
> EAP-Message =
> 0x301e170d3131313031333039353734375a170d3132313031323039353734375a307c310b30
> 09060355040613024652310f300d0603550408130652616469757331153013060355040a130c
> 4578616d706c6520496e632e312330210603550403131a4578616d706c652053657276657220
> 43657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d
> 706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a028201
> 0100caef6b9b67bdef4ad8e1e44128bc7e4d59b10f7fea2f25a815df34e36e48223a3812b6b4
> c9005ddf99cf79afe5a4645eb7847cdaa444ad11ad858447f05e
> EAP-Message =
> 0xbb17624bb71f12a488110b381a1a629f04fe7811e5589b7cfebad4e16d89ce6b982880f28d
> b5f6817bda4db85b83520a6d47f682e224f70e9a104fc421ca712b8fa4c1b9e6c98329a5db41
> 50bb6d06fe29729e2842c5ecb6960b89cbdadc1ec91e7eadbdb4288023659fef46b02ec89bb4
> 7026e86c85aefb37d6df74167a3e12279d32b42199ba04013f8d4985c218365f0f60c3d9af22
> 7a3949125925db3ffb1bdccf34548f7626dac63e22b0624b6f16669d47fbc7ca4ddf2f794d00
> 4b901ecb090203010001a317301530130603551d25040c300a06082b06010505070301300d06
> 092a864886f70d01010405000382010100b676c0afe25190b575
> EAP-Message =
> 0x1fa8ec975b02e09c61c8b25c4e2b7fe96b9275018524ef5bfecace1625ea8a09aaccc1a0b9
> cdb2ebe7d1780ecf6a2bf775d639944c27881d5ea4d6fb013799ca759216777b46ee8dbdd9b6
> 6346ad9ee5b4e1854f04fa495bc64ce62702c50f3ba637d28c835c3113ca9984a94b1b3e6402
> 8034c73d734af96bdbb3e7bbb427372fb069af913eb2ced4ef9253a87050138334320cd2f563
> c457de969f8472fd861282613fb501a0732e1bc2e9a0eb41caa6cb481c773f79737c1a9bc0e9
> 5e795ee5a0974fb2752d947606422dfba0e2c45b046c834c0553aecdd2b3a37952050de7a2d6
> e27be9065dc29bc10b90188a7faf20beed7b904c0004ab308204
> EAP-Message = 0xa73082038fa0030201020209
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xfdcbcc4afcc8d9fe908aaa2f4bb4f780
> (7) Finished request 7.
> Waking up in 0.1 seconds.
> rad_recv: Access-Request packet from host 10.190.0.2 port 1812, id=233,
> length=208
> User-Name = "{sm=1}test at company.ie"
> EAP-Message = 0x020300061500
> Message-Authenticator = 0xe4548d83804e1e53f53cce5d4e69eede
> NAS-Identifier = "BTS105"
> NAS-IP-Address = 10.190.0.2
> Calling-Station-Id = "00-26-82-D0-B6-F6"
> WiMAX-BS-Id = 0xffc6c8690100
> NAS-Port-Type = Wireless-802.16
> Framed-MTU = 2000
> Service-Type = Framed-User
> WiMAX-GMT-Timezone-offset = 0
> WiMAX-Release = "1.0"
> WiMAX-Accounting-Capabilities = IP-Session-Based
> WiMAX-Hotlining-Capabilities = Hotline-Profile-Id
> Attr-26.24757.1.7 = 0x0000028a
> State = 0xfdcbcc4afcc8d9fe908aaa2f4bb4f780
> (8) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (8) group authorize {
> (8) - entering group authorize {...}
> (8) [preprocess] = ok
> (8) [chap] = noop
> (8) [mschap] = noop
> (8) eap : EAP packet type response id 3 length 6
> (8) eap : Continuing tunnel setup.
> (8) [eap] = ok
> (8) Found Auth-Type = ?
> (8) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (8) group authenticate {
> (8) - entering group authenticate {...}
> (8) eap : Request found, released from the list
> (8) eap : EAP/ttls
> (8) eap : processing type ttls
> (8) ttls : Authenticate
> (8) ttls : processing EAP-TLS
> (8) ttls : Received TLS ACK
> (8) ttls : Received TLS ACK
> (8) ttls : ACK handshake fragment handler
> (8) ttls : eaptls_verify returned 1
> (8) ttls : eaptls_process returned 13
> (8) [eap] = handled
> Sending Access-Challenge of id 233 to 10.190.0.2 port 1812
> EAP-Message =
> 0x0104040015c000000aad00ec1d720e4a7e8a98300d06092a864886f70d0101050500308193
> 310b3009060355040613024652310f300d060355040813065261646975733112301006035504
> 071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e312030
> 1e06092a864886f70d010901161161646d696e406578616d706c652e636f6d31263024060355
> 0403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d31
> 31313031333039353734375a170d3132313031323039353734375a308193310b300906035504
> 0613024652310f300d0603550408130652616469757331123010
> EAP-Message =
> 0x06035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e
> 632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d3126
> 30240603550403131d4578616d706c6520436572746966696361746520417574686f72697479
> 30820122300d06092a864886f70d01010105000382010f003082010a0282010100be734cc62e
> cb7177f45d9f49d0dc7c67f1e8f71f9ad048dd67a12de738c98729d524e687e47b801bf912a3
> ce76ff5c35cbbae16eed0733b5e51b53633123803af7f8bdb2a456b82f3c022ab8aa75e09e55
> f898044a1de747799af4506d191327f3cb2fd28c87d277828b1b
> EAP-Message =
> 0x5372af25f28e4dc8ece69051878c673e3036fad0165be210ee1e208c762dbd201af930f8d3
> 0c2d8e1f112afa92bec4462e0f812d645e0572c991a9f1ff3fb7938f9aa1c92db6464ea6025f
> c34af023dc152c09ac6074742f3b1766cfca4c352255553bea37de71ea152bb306cd1893e111
> 19326b7a5bdf957fc90726ffcf49b542285aeda0480ced4f180547fe0449400dfd786fc50203
> 010001a381fb3081f8301d0603551d0e04160414b57317268d6d7a07453f567b60d8e38ab31a
> f2a13081c80603551d230481c03081bd8014b57317268d6d7a07453f567b60d8e38ab31af2a1
> a18199a48196308193310b3009060355040613024652310f300d
> EAP-Message =
> 0x060355040813065261646975733112301006035504071309536f6d65776865726531153013
> 060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d01090116116164
> 6d696e406578616d706c652e636f6d312630240603550403131d4578616d706c652043657274
> 6966696361746520417574686f72697479820900ec1d720e4a7e8a98300c0603551d13040530
> 030101ff300d06092a864886f70d010105050003820101000145888b12dc92a1ae57d9cf122d
> 90702ccf6fdeacf92f4e46bdab9773d80bb5373ddacd234f03fd8d8f8587b515ba24b28931ff
> ec882ad044f8bc07f3c510b90f86e302639082c1d1fbc9fd9d2b
> EAP-Message = 0x29f6a43153b63396708d1c2a
> Message-Authenticator = 0x00000000000000000000000000000000
> State = 0xfdcbcc4affcfd9fe908aaa2f4bb4f780
> (8) Finished request 8.
>
>
>
>
>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list