Creating templates for users

Krzysztof Grobelak kgrobelak at airspeed.ie
Thu Oct 20 18:05:23 CEST 2011


Hello,

I am having some troubles creating templates with wimax attributes for 
users. I created files with atributes in them in the form:

                         Alvarion-R3-IF-Name                     += 
CPEL3Mgmt,
                         Alvarion-PDFID                          += 1,
                         WiMAX-Packet-Data-Flow-Id               += 1,
                         WiMAX-Service-Data-Flow-Id              += 1,
                         WiMAX-Direction                         += 3,
                         WiMAX-Transport-Type                    += 1,
                         WiMAX-Uplink-QOS-Id                     += 1,
                         WiMAX-Downlink-QOS-Id                   += 1,

and then in the users file I use:

30001020         Cleartext-Password                      := "30001020"
                         $INCLUDE        cpe_mgmt,
                         $INCLUDE        ethcs_1_vlan_sf,
                         WiMAX-VLAN-ID                           += 175,
                         Session-Timeout                          = 3600,
                         Reply-Message                            = 
"4motion test"

but I am getting error:
Thu Oct 20 16:35:24 2011 : Error: /usr/local/etc/raddb/users[63]: Parse 
error (reply) for entry 30001020: expecting operator
Thu Oct 20 16:35:24 2011 : Error: Errors reading /usr/local/etc/raddb/users
Thu Oct 20 16:35:24 2011 : Error: /usr/local/etc/raddb/modules/files[7]: 
Instantiation failed for module "files"
Thu Oct 20 16:35:24 2011 : Error: 
/usr/local/etc/raddb/sites-enabled/default[152]: Failed to load module 
"files".
Thu Oct 20 16:35:24 2011 : Error: 
/usr/local/etc/raddb/sites-enabled/default[62]: Errors parsing authorize 
section.

Simillar thing happened when i tried using template.conf


30001020             Cleartext-Password                      := "30001020"
                             $template                                 
     cpe_mgmt,
                              Session-Timeout                          = 
3600,
                             Reply-Message                            = 
"4motion test"

but the error i got was:
Thu Oct 20 17:00:46 2011 : Debug: including configuration file 
/usr/local/etc/raddb/templates.conf
Thu Oct 20 17:00:46 2011 : Error: 
/usr/local/etc/raddb/templates.conf[109]: Invalid operator in assignment
Thu Oct 20 17:00:46 2011 : Error: Errors reading 
/usr/local/etc/raddb/radiusd.conf

Is the += format not supported in the templates.conf?? Or is there any 
other way to save myself the problem of typing all the attributes for 
each user??

Thanks in advance.



Kind regards,
Krzysztof

 
 
 
 




More information about the Freeradius-Users mailing list