Freeradius and Zone Director

[Primož Marinšek]

Hmm

If you are getting the success from testing then it should be ok. I've
heard of people testing various things with the ZD in regards to a RADIUS
server and it allways worked ok so I doubt that this would be a ZD issue.

Which FW are you using on the ZD?

2012/7/2 Andrew Andonopoulos <andre8525 at hotmail.com>

>  hi and thanks for your reply
>
> From the zone director side i am using 802.1x Eap with WPA (in the Wlan
> section) and the dynamic vlan is enabled. The AP and the zonedirector are
> connected with the an Alied Telesis core switch and i am allowing all the
> vlans and the native. The only i can think is a authentication issue for
> example the zone director is using eap but maybe i need to change something
> to the freeradius to allow eap.
>
> Also on the ruckus ZoneDirector the AAA server is configured correctly and
> when i trying to test the username and password i am receiving a success
> message.
>
> regards
> Andrew
>
> ------------------------------
> Date: Mon, 2 Jul 2012 11:06:41 +0200
> Subject: Re: Freeradius and Zone Director
> From: pmtelos at gmail.com
> To: freeradius-users at lists.freeradius.org
>
>
> I'm more of an RuckusWireless specialist than an freeRADIUS, but I'll try
> to help.
>
> The ZD has a posibility of PAP or CHAP. Which Fw are you using?
>
> The ZD and APs usualy work that if you have a trunk you also need a native
> (untagged network) for them to communicate. You can also use a management
> VLAN to manage all the devices. And it is also possible to use DHCP Option
> 43 for dicovery and such.
>
> Regards
>
> 2012/7/2 Andrew Andonopoulos <andre8525 at hotmail.com>
>
>  Hello to all,
>
> I have a problem with the freeradius and the Zonedirector. I am using
> MySql tables to store the radrequest and radreply also the Nas tables. If i
> connect a cat5 cable to the core switch i am getting an IP from the correct
> Vlan. If i use the zone director i can't authenticate and get the correct
> ip. I read somewhere that Ruckus Zonedirector is using chap and freeradius
> pap and chap but i am not sure if that's the issue. The zonedirector and
> the Access points are connected with trunk ports. I am wondering if someone
> faced the same problem and give me some ideas.
>
> Regards
> Andrew
>
> p.s attached file have the logs from the freeradius
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>
>
>
> --
> Primož Marinšek
>
>
> - List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>



-- 
Primož Marinšek
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20120702/ca189b1a/attachment-0001.html>