Freeradius and Zone Director

Andrew Andonopoulos andre8525 at hotmail.com
Mon Jul 2 13:50:33 CEST 2012


hi,
zone director details are:
Model ZD1106
Version 9.1.0.0 build 23

Date: Mon, 2 Jul 2012 11:54:26 +0200
Subject: Re: Freeradius and Zone Director
From: pmtelos at gmail.com
To: freeradius-users at lists.freeradius.org

Hmm

If you are getting the success from testing then it should be ok. I've heard of people testing various things with the ZD in regards to a RADIUS server and it allways worked ok so I doubt that this would be a ZD issue.


Which FW are you using on the ZD?

2012/7/2 Andrew Andonopoulos <andre8525 at hotmail.com>





hi and thanks for your reply
>From the zone director side i am using 802.1x Eap with WPA (in the Wlan section) and the dynamic vlan is enabled. The AP and the zonedirector are connected with the an Alied Telesis core switch and i am allowing all the vlans and the native. The only i can think is a authentication issue for example the zone director is using eap but maybe i need to change something to the freeradius to allow eap. 

Also on the ruckus ZoneDirector the AAA server is configured correctly and when i trying to test the username and password i am receiving a success message. 
regards
Andrew

Date: Mon, 2 Jul 2012 11:06:41 +0200
Subject: Re: Freeradius and Zone Director
From: pmtelos at gmail.com
To: freeradius-users at lists.freeradius.org


I'm more of an RuckusWireless specialist than an freeRADIUS, but I'll try to help.

The ZD has a posibility of PAP or CHAP. Which Fw are you using?

The ZD and APs usualy work that if you have a trunk you also need a native (untagged network) for them to communicate. You can also use a management VLAN to manage all the devices. And it is also possible to use DHCP Option 43 for dicovery and such.



Regards

2012/7/2 Andrew Andonopoulos <andre8525 at hotmail.com>






Hello to all,
I have a problem with the freeradius and the Zonedirector. I am using MySql tables to store the radrequest and radreply also the Nas tables. If i connect a cat5 cable to the core switch i am getting an IP from the correct Vlan. If i use the zone director i can't authenticate and get the correct ip. I read somewhere that Ruckus Zonedirector is using chap and freeradius pap and chap but i am not sure if that's the issue. The zonedirector and the Access points are connected with trunk ports. I am wondering if someone faced the same problem and give me some ideas. 


RegardsAndrew
p.s attached file have the logs from the freeradius 		 	   		  

-

List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html


-- 
Primož Marinšek





-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html 		 	   		  

-

List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html


-- 
Primož Marinšek




-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20120702/3758ff19/attachment.html>


More information about the Freeradius-Users mailing list