Stuck on very basic freeradius setup

[Tiago]

Alan,
My first message had that data, I'm pasting here again - after ready to
process line, thanks.

Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1 port 44400, id=204,
length=57
        User-Name = "miles"
        User-Password = "davis45"
        NAS-IP-Address = 201.23.200.7
        NAS-Port = 0
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "miles", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
[files] users: Matched entry miles at line 3
[files]         expand: Hello, %{User-Name} -> Hello, miles
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns updated
Found Auth-Type = PAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group PAP {...}
[pap] login attempt with password "davis45"
[pap] No password configured for the user.  Cannot do authentication
++[pap] returns fail
Failed to authenticate the user.
Login incorrect: [miles/davis45] (from client localhost port 0)
Using Post-Auth-Type Reject
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject]     expand: %{User-Name} -> miles
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 204 to 127.0.0.1 port 44400
        Reply-Message = "Hello, miles"
Waking up in 4.9 seconds.
Cleaning up request 0 ID 204 with timestamp +10
Ready to process requests.


2012/7/3 alan buxey <A.L.M.Buxey at lboro.ac.uk>

> Hi,
> >    Sorry, here is my complete debug log:
> >    [1]http://pastebin.com/dYWb5tDs
>
> no it isnt. thats not complete - thats just the startup...where is the
> actual
> log when an event happens..this debug log just ends with
>
> Listening on authentication address * port 1812
> Listening on authentication address 127.0.0.1 port 18120 as server
> inner-tunnel
>
> Listening on proxy address * port 1814
> Ready to process requests.
>
>
> and please dont use pastebin etc - just post the full output to this list.
> its not big its just simple and easy for us to help you then.
>
> alan
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20120703/2cf9d856/attachment-0001.html>