Problems wpa2-tls eap mschapv2 ldap
Roberto Ortega Ramiro
roberto.ortega at esj.es
Fri May 31 00:40:17 CEST 2013
I have read many times the deployingradius.com guide, i have visit
this site many times too.
I'm no able to enable wpa_supplicant, but every test with radtest are
good i have config freeradius for ldap.
I attach the debbug file radiusd -X
I have take the file ca.pem in the validation asistan in gnome, i'm
using ubuntu.
What is wrong? Any idea?
Thank you.
PD: sorry about my bad inglish, it's posible that my bad english is
the reason becouse i'm not able to configure freeradius properly.
FreeRADIUS Version 2.1.12, for host x86_64-redhat-linux-gnu, built on
Jan 9 2013 at 05:03:12
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/opendirectory
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/redis
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/soh
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/ntlm_auth
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/dynamic_clients
including configuration file /etc/raddb/modules/replicate
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/rediswho
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/control-socket
including configuration file /etc/raddb/sites-enabled/default
main {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
including dictionary file /etc/raddb/dictionary
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client 192.168.120.0/23 {
require_message_authenticator = no
secret = "test"
shortname = "private-network-2"
}
client 192.168.202.252 {
require_message_authenticator = no
secret = "test"
shortname = "ldap"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/raddb/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/etc/raddb/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
modules {
Module: Creating Auth-Type = digest
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/raddb/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
allow_retry = yes
}
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file /etc/raddb/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/raddb/modules/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/raddb/eap.conf
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
CA_file = "/etc/raddb/certs/ca.pem"
private_key_password = "escuelas"
dh_file = "/etc/raddb/certs/dh"
random_file = "/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/etc/raddb/modules/preprocess
preprocess {
huntgroups = "/etc/raddb/huntgroups"
hints = "/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /etc/raddb/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /etc/raddb/modules/files
files {
usersfile = "/etc/raddb/users"
acctusersfile = "/etc/raddb/acct_users"
preproxy_usersfile = "/etc/raddb/preproxy_users"
compat = "no"
}
Module: Linked to module rlm_ldap
Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap
ldap {
server = "ldap.server"
port = 389
password = "passwd"
identity = "domineUSer"
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
tls {
start_tls = no
require_cert = "allow"
}
basedn = "ou=Usuarios,dc=escuelassj"
filter = "(uid=%u)"
base_filter = "(objectclass=radiusprofile)"
auto_header = no
access_attr_used_for_allow = yes
groupname_attribute = "cn"
groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
dictionary_mapping = "/etc/raddb/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 5
compare_check_items = no
do_xlat = yes
set_auth_type = yes
keepalive {
interval = 3
}
}
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed
in the "authenticate" section.
rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS
Tunnel-Private-Group-Id
conns: 0x2addb70564d0
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file
/etc/raddb/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /etc/raddb/modules/detail
detail {
detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from
file /etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file
/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
} # modules
} # server
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address * port 52539
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.202.252 port 46850,
id=177, length=178
User-Name = "clemente.blanch"
NAS-IP-Address = 192.168.202.252
NAS-Port = 2049
Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius"
Calling-Station-Id = "4C-ED-DE-2C-9C-B2"
Framed-MTU = 1250
NAS-Port-Type = Wireless-802.11
Framed-Compression = None
Connect-Info = "CONNECT 802.11g"
EAP-Message = 0x0201001401636c656d656e74652e626c616e6368
Message-Authenticator = 0x0be07d35efe547bae8a31bfa7dc9b644
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 20
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for clemente.blanch
[ldap] expand: (uid=%u) -> (uid=clemente.blanch)
[ldap] expand: ou=Usuarios,dc=escuelassj -> ou=Usuarios,dc=escuelassj
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] attempting LDAP reconnection
[ldap] (re)connect to 192.168.200.208:389, authentication 0
[ldap] bind as cn=root,dc=escuelassj/passwd to 192.168.200.208:389
[ldap] waiting for bind result ...
[ldap] Bind was successful
[ldap] performing search in ou=Usuarios,dc=escuelassj, with filter
(uid=clemente.blanch)
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header ==
"{SSHA}ZUTv0zmZc619XgoJHvSJpoHV4edmdVc0"
[ldap] sambaNtPassword -> NT-Password ==
0x3130363939383944313338324335343830464532353633374646303236314138
[ldap] sambaLmPassword -> LM-Password ==
0x3836333231454630413134313242443441414433423433354235313430344545
[ldap] looking for reply items in directory...
[ldap] user clemente.blanch authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] Normalizing NT-Password from hex encoding
[pap] Normalizing LM-Password from hex encoding
[pap] Normalizing SSHA1-Password from base64 encoding
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 177 to 192.168.202.252 port 46850
EAP-Message = 0x01020016041029ef720b1fc4b5d33ad93db3b7440dd1
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4300b9324302bd785bc66cf0b8940050
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.202.252 port 46850,
id=178, length=182
User-Name = "clemente.blanch"
NAS-IP-Address = 192.168.202.252
NAS-Port = 2049
Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius"
Calling-Station-Id = "4C-ED-DE-2C-9C-B2"
Framed-MTU = 1250
NAS-Port-Type = Wireless-802.11
Framed-Compression = None
Connect-Info = "CONNECT 802.11g"
EAP-Message = 0x020200060315
State = 0x4300b9324302bd785bc66cf0b8940050
Message-Authenticator = 0x85b25270b6ad4a02c4a441365de04f9b
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for clemente.blanch
[ldap] expand: (uid=%u) -> (uid=clemente.blanch)
[ldap] expand: ou=Usuarios,dc=escuelassj -> ou=Usuarios,dc=escuelassj
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in ou=Usuarios,dc=escuelassj, with filter
(uid=clemente.blanch)
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header ==
"{SSHA}ZUTv0zmZc619XgoJHvSJpoHV4edmdVc0"
[ldap] sambaNtPassword -> NT-Password ==
0x3130363939383944313338324335343830464532353633374646303236314138
[ldap] sambaLmPassword -> LM-Password ==
0x3836333231454630413134313242443441414433423433354235313430344545
[ldap] looking for reply items in directory...
[ldap] user clemente.blanch authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] Normalizing NT-Password from hex encoding
[pap] Normalizing LM-Password from hex encoding
[pap] Normalizing SSHA1-Password from base64 encoding
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/ttls
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 178 to 192.168.202.252 port 46850
EAP-Message = 0x010300061520
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4300b9324203ac785bc66cf0b8940050
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.202.252 port 46850,
id=179, length=403
User-Name = "clemente.blanch"
NAS-IP-Address = 192.168.202.252
NAS-Port = 2049
Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius"
Calling-Station-Id = "4C-ED-DE-2C-9C-B2"
Framed-MTU = 1250
NAS-Port-Type = Wireless-802.11
Framed-Compression = None
Connect-Info = "CONNECT 802.11g"
EAP-Message = 0x020300e3150016030100d8010000d4030151a7502728b223adfd9d1576a726a7311af75bde6d41eb7f51784e34c0cbadf0000066c014c00ac022c0210039003800880087c00fc00500350084c012c008c01cc01b00160013c00dc003000ac013c009c01fc01e00330032009a009900450044c00ec004002f00960041c011c007c00cc002000500040015001200090014001100080006000300ff01000045000b000403000102000a00340032000e000d0019000b000c00180009000a00160017000800060007001400150004000500120013000100020003000f00100011000f000101
State = 0x4300b9324203ac785bc66cf0b8940050
Message-Authenticator = 0xd439255984d72e6b31e8784decf1ff44
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 227
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] eaptls_verify returned 7
[ttls] Done initial handshake
[ttls] (other): before/accept initialization
[ttls] TLS_accept: before/accept initialization
[ttls] <<< TLS 1.0 Handshake [length 00d8], ClientHello
[ttls] TLS_accept: SSLv3 read client hello A
[ttls] >>> TLS 1.0 Handshake [length 0031], ServerHello
[ttls] TLS_accept: SSLv3 write server hello A
[ttls] >>> TLS 1.0 Handshake [length 0855], Certificate
[ttls] TLS_accept: SSLv3 write certificate A
[ttls] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange
[ttls] TLS_accept: SSLv3 write key exchange A
[ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[ttls] TLS_accept: SSLv3 write server done A
[ttls] TLS_accept: SSLv3 flush data
[ttls] TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[ttls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 179 to 192.168.202.252 port 46850
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0xa5308204a130820389a00302
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4300b9324104ac785bc66cf0b8940050
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.202.252 port 46850,
id=180, length=182
User-Name = "clemente.blanch"
NAS-IP-Address = 192.168.202.252
NAS-Port = 2049
Called-Station-Id = "00-90-0B-23-2E-BF:Escuelas-Radius"
Calling-Station-Id = "4C-ED-DE-2C-9C-B2"
Framed-MTU = 1250
NAS-Port-Type = Wireless-802.11
Framed-Compression = None
Connect-Info = "CONNECT 802.11g"
EAP-Message = 0x020400061500
State = 0x4300b9324104ac785bc66cf0b8940050
Message-Authenticator = 0xe55d4634e860825f7eed8857971a2223
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "clemente.blanch", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}/
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] Received TLS ACK
[ttls] ACK handshake fragment handler
[ttls] eaptls_verify returned 1
[ttls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 180 to 192.168.202.252 port 46850
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x83f82d312c7744ab946edc5e
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4300b9324005ac785bc66cf0b8940050
Finished request 3.
--
--
Un saludo.
____________________
Roberto Ortega
More information about the Freeradius-Users
mailing list