Active Directory authentication question

Wed Sep 25 17:14:09 CEST 2013

But in the EAP-TLS section from eap.conf file, I don't see any
reference to MSCHAPv2....and remember the NTLM authentication query is
set up in the MSCHAPv2 module....

2013/9/25  <stefan.paetow at diamond.ac.uk>:
> Because your EAP-TLS process works? Remember, you set up EAP-TLS first (which worked).
>
> You just configured EAP-TTLS with EAP-MSCHAPv2 as an additional authentication method. Since the default_eap_type is set to ttls, your server *prefers* using EAP-TTLS with EAP-MSCHAPv2, but it still supports other methods (like EAP-TLS and PEAP with EAP-MSCHAPv2).
>
> Stefan
>
>
>> -----Original Message-----
>> From: freeradius-users-
>> bounces+stefan.paetow=diamond.ac.uk at lists.freeradius.org
>> [mailto:freeradius-users-
>> bounces+stefan.paetow=diamond.ac.uk at lists.freeradius.org] On Behalf Of
>> Roberto Carna
>> Sent: 25 September 2013 15:44
>> To: FreeRadius users mailing list
>> Subject: Re: Active Directory authentication question
>>
>> Dear Stephan: Notebook with Windows 7 + AP + EAP-TTLS + MSCHAPv2 +
>> Freeradius + AD is working now !!!
>>
>> But just a doubt: if I access with my Android device, using EAP-TLS
>> (not EAP-TTLS) + MSCHAPv2, I can access the same...why ???
>>
>> Regards and thanks,
>>
>> Roberto
>>
>> 2013/9/25  <stefan.paetow at diamond.ac.uk>:
>> > In the eap section, the default is "md5", set it to "ttls"
>> >
>> > And Roberto, you've emailed the entire FreeRADIUS mailing list.  :-)
>> >
>> > Stefan
>> >
>> >> -----Original Message-----
>> >> From: freeradius-users-
>> >> bounces+stefan.paetow=diamond.ac.uk at lists.freeradius.org
>> >> [mailto:freeradius-users-
>> >> bounces+stefan.paetow=diamond.ac.uk at lists.freeradius.org] On Behalf
>> >> bounces+Of
>> >> Roberto Carna
>> >> Sent: 25 September 2013 14:27
>> >> To: FreeRadius users mailing list
>> >> Subject: Re: Active Directory authentication question
>> >>
>> >> Dear Stephan, just the last question please....in your guide you
>> say:
>> >>
>> >> In /etc/raddb/eap.conf, change the ttls section as follows:
>> >>
>> >> default_eap_type = mschapv2
>> >> copy_request_to_tunnel = yes
>> >> use_tunneled_reply = no
>> >>
>> >> That's OK....but what do I have to put in the eap section from
>> >> eap.conf file???
>> >>
>> >>
>> >>  eap {
>> >>                 default_eap_type = ttls
>> >>
>> >> default_eap_type=ttls or =mschapv2 ???
>> >>
>> >> Thanks a lot,
>> >>
>> >> Roberto
>> >>
>> >>
>> >> 2013/9/24  <stefan.paetow at diamond.ac.uk>:
>> >> > You need the following items on your Debian system to build
>> >> eapol_test:
>> >> >
>> >> > libssl-dev, libnl1, libnl-dev
>> >> >
>> >> > :-)
>> >> >
>> >> > Stefan
>> >> >
>> >> >> -----Original Message-----
>> >> >> From: freeradius-users-
>> >> >> bounces+stefan.paetow=diamond.ac.uk at lists.freeradius.org
>> >> >> [mailto:freeradius-users-
>> >> >> bounces+stefan.paetow=diamond.ac.uk at lists.freeradius.org] On
>> >> >> bounces+Behalf Of
>> >> >> Roberto Carna
>> >> >> Sent: 24 September 2013 15:17
>> >> >> To: FreeRadius users mailing list
>> >> >> Subject: Re: Active Directory authentication question
>> >> >>
>> >> >> Dear, I'm advancing in the Freeradius + AD authentication....just
>> >> >> a short question: when I want to make the eapol_test tool, I get
>> >> >> this
>> >> >> error:
>> >> >>
>> >> >> # make eapol_test
>> >> >> /usr/bin/ld: cannot find -lnl
>> >> >> collect2: error: ld returned 1 exit status
>> >> >> make: *** [eapol_test] Error 1
>> >> >>
>> >> >> I've followed all the steps to use this tool, but I can't make
>> it.
>> >> >>
>> >> >> What can be the problem ???
>> >> >>
>> >> >> Thanks
>> >> >>
>> >> >>
>> >> >> 2013/9/24  <stefan.paetow at diamond.ac.uk>:
>> >> >> > Hi Roberto,
>> >> >> >
>> >> >> > You have to install Kerberos, yes. I believe you'll need the
>> >> >> > krb5-
>> >> >> user package.
>> >> >> >
>> >> >> > When you install krb5-user, it should install krb5.conf for
>> you,
>> >> >> > but
>> >> >> I'm not up to date on Debian specifically.
>> >> >> >
>> >> >> > Stefan
>> >> >> >
>> >> >> >
>> >> >> >> -----Original Message-----
>> >> >> >> From: Roberto Carna [mailto:robertocarna36 at gmail.com]
>> >> >> >> Sent: 23 September 2013 19:16
>> >> >> >> To: Paetow, Stefan (DLSLtd,RAL,LSCI)
>> >> >> >> Subject: Re: Active Directory authentication question
>> >> >> >>
>> >> >> >> Dear Stepahn, I use Debian 7 for my Freeradius server and
>> there
>> >> >> >> I've installed Samba, Winbind and krb5.conf....not Kerberos
>> (or
>> >> >> >> whatever the package is called).
>> >> >> >>
>> >> >> >> Do I need to install the Kerberos package, or simply install
>> >> >> >> the krb5.conf and then edit it ???
>> >> >> >>
>> >> >> >> Thanks again.
>> >> >> >>
>> >> >> >> Roberto
>> >> >> >>
>> >> >> >> 2013/9/23  <stefan.paetow at diamond.ac.uk>:
>> >> >> >> > Hi Roberto,
>> >> >> >> >
>> >> >> >> > When in the process do you get that error?
>> >> >> >> >
>> >> >> >> > Here are my configuration bits. In the [global] section of
>> >> >> >> > the
>> >> >> >> SMB.CONF file I have:
>> >> >> >> >
>> >> >> >> > workgroup = DIAMOND
>> >> >> >> > security = ads
>> >> >> >> > realm = DIAMOND.LOCAL (my test domain) password server = IP
>> >> >> address
>> >> >> >> of
>> >> >> >> > my primary domain controller
>> >> >> >> >
>> >> >> >> > Everything else is left as-is (default). My test domain is
>> >> >> >> > called
>> >> >> >> DIAMOND.LOCAL.
>> >> >> >> >
>> >> >> >> > Stefan
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >> -----Original Message-----
>> >> >> >> >> From: Roberto Carna [mailto:robertocarna36 at gmail.com]
>> >> >> >> >> Sent: 23 September 2013 15:58
>> >> >> >> >> To: Paetow, Stefan (DLSLtd,RAL,LSCI)
>> >> >> >> >> Subject: Re: Active Directory authentication question
>> >> >> >> >>
>> >> >> >> >> Dear Stephan, can you send me a complete smb.conf file
>> >> >> >> >> because I am
>> >> >> >> a
>> >> >> >> >> bit lost in the correct configuration ?
>> >> >> >> >>
>> >> >> >> >> I'm getting the error:
>> >> >> >> >>
>> >> >> >> >> Could not connect to server 10.11.0.64 Connection failed:
>> >> >> >> >> NT_STATUS_BAD_NETWORK_NAME
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > --
>> >> >> >> > This e-mail and any attachments may contain confidential,
>> >> >> copyright
>> >> >> >> and or privileged material, and are for the use of the
>> intended
>> >> >> >> addressee only. If you are not the intended addressee or an
>> >> >> >> authorised recipient of the addressee please notify us of
>> >> >> >> receipt by returning the e-mail and do not use, copy, retain,
>> >> >> >> distribute or disclose the information in or attached to the
>> e-mail.
>> >> >> >> > Any opinions expressed within this e-mail are those of the
>> >> >> >> > individual
>> >> >> >> and not necessarily of Diamond Light Source Ltd.
>> >> >> >> > Diamond Light Source Ltd. cannot guarantee that this e-mail
>> >> >> >> > or any
>> >> >> >> attachments are free from viruses and we cannot accept
>> >> >> >> liability for any damage which you may sustain as a result of
>> >> >> >> software viruses which may be transmitted in or with the
>> message.
>> >> >> >> > Diamond Light Source Limited (company no. 4375679).
>> >> >> >> > Registered in England and Wales with its registered office
>> at
>> >> >> >> > Diamond House,
>> >> >> >> Harwell
>> >> >> >> > Science and Innovation Campus, Didcot, Oxfordshire, OX11
>> 0DE,
>> >> >> >> > United Kingdom
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >
>> >> >> > --
>> >> >> > This e-mail and any attachments may contain confidential,
>> >> copyright
>> >> >> and or privileged material, and are for the use of the intended
>> >> >> addressee only. If you are not the intended addressee or an
>> >> >> authorised recipient of the addressee please notify us of receipt
>> >> >> by returning the e-mail and do not use, copy, retain, distribute
>> >> >> or disclose the information in or attached to the e-mail.
>> >> >> > Any opinions expressed within this e-mail are those of the
>> >> >> > individual
>> >> >> and not necessarily of Diamond Light Source Ltd.
>> >> >> > Diamond Light Source Ltd. cannot guarantee that this e-mail or
>> >> >> > any
>> >> >> attachments are free from viruses and we cannot accept liability
>> >> >> for any damage which you may sustain as a result of software
>> >> >> viruses which may be transmitted in or with the message.
>> >> >> > Diamond Light Source Limited (company no. 4375679). Registered
>> >> >> > in England and Wales with its registered office at Diamond
>> >> >> > House,
>> >> >> Harwell
>> >> >> > Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE,
>> >> >> > United Kingdom
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> -
>> >> >> List info/subscribe/unsubscribe? See
>> >> >> http://www.freeradius.org/list/users.html
>> >> >
>> >> > --
>> >> > This e-mail and any attachments may contain confidential,
>> copyright
>> >> and or privileged material, and are for the use of the intended
>> >> addressee only. If you are not the intended addressee or an
>> >> authorised recipient of the addressee please notify us of receipt by
>> >> returning the e-mail and do not use, copy, retain, distribute or
>> >> disclose the information in or attached to the e-mail.
>> >> > Any opinions expressed within this e-mail are those of the
>> >> > individual
>> >> and not necessarily of Diamond Light Source Ltd.
>> >> > Diamond Light Source Ltd. cannot guarantee that this e-mail or any
>> >> attachments are free from viruses and we cannot accept liability for
>> >> any damage which you may sustain as a result of software viruses
>> >> which may be transmitted in or with the message.
>> >> > Diamond Light Source Limited (company no. 4375679). Registered in
>> >> > England and Wales with its registered office at Diamond House,
>> >> Harwell
>> >> > Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE,
>> >> > United Kingdom
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > -
>> >> > List info/subscribe/unsubscribe? See
>> >> > http://www.freeradius.org/list/users.html
>> >> -
>> >> List info/subscribe/unsubscribe? See
>> >> http://www.freeradius.org/list/users.html
>> >
>> > --
>> > This e-mail and any attachments may contain confidential, copyright
>> and or privileged material, and are for the use of the intended
>> addressee only. If you are not the intended addressee or an authorised
>> recipient of the addressee please notify us of receipt by returning the
>> e-mail and do not use, copy, retain, distribute or disclose the
>> information in or attached to the e-mail.
>> > Any opinions expressed within this e-mail are those of the individual
>> and not necessarily of Diamond Light Source Ltd.
>> > Diamond Light Source Ltd. cannot guarantee that this e-mail or any
>> attachments are free from viruses and we cannot accept liability for
>> any damage which you may sustain as a result of software viruses which
>> may be transmitted in or with the message.
>> > Diamond Light Source Limited (company no. 4375679). Registered in
>> > England and Wales with its registered office at Diamond House,
>> Harwell
>> > Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United
>> > Kingdom
>> >
>> >
>> >
>> >
>> > -
>> > List info/subscribe/unsubscribe? See
>> > http://www.freeradius.org/list/users.html
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>
> --
> This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
> Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
> Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
> Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
>
>
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html