Assigning users into different VLANs

[Martin Hrabovský]

Here is what I catched in debug mode.

While users file:
"DEFAULT"
    Tunnel-Type = VLAN,
    Tunnel-Medium-Type = IEEE-802,
    Tunnel-Private-Group-Id = 52,
    Tunnel-Preference = 0x000000
"mhx"    Cleartext-Password := "admin"
    Tunnel-Type = VLAN,
    Tunnel-Medium-Type = IEEE-802,
    Tunnel-Private-Group-Id = 53,
    Tunnel-Preference = 0x000000
DEFAULT    Framed-Protocol == PPP
    Framed-Protocol = PPP,
    Framed-Compression = Van-Jacobson-TCP-IP
DEFAULT    Hint == "CSLIP"
    Framed-Protocol = SLIP,
    Framed-Compression = Van-Jacobson-TCP-IP
DEFAULT    Hint == "SLIP"
    Framed-Protocol = SLIP




2014-07-09 13:27 GMT+02:00 <A.L.M.Buxey at lboro.ac.uk>:

> Hi,
>
> >    Yes, I tried it without it as well, but it didn't work eather.
> >    Do I need to change something in other file? (Logging as admin works
> >    well.)
>
> what does full debug mode show?
>
> alan
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>



-- 
Martin Hrabovský
5ZP031
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20140710/127c6ea8/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Debug output
Type: application/octet-stream
Size: 33848 bytes
Desc: not available
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20140710/127c6ea8/attachment-0001.obj>