HP M200 certificate authentication fails
aland at deployingradius.com
Fri Jul 25 14:55:54 CEST 2014
Gordon Cook wrote:
> What I mean by the configuration needs to adjusted.
> The client using the same credentials can authenticate through the cisco ap and not the HP AP.
OK... that's what you said already, but sure.
> There is very few settings in the HP that can be set for the radius server.
IP address and shared secret, usually.
> So what I am thinking is something needs to be changed, removed or added to the configuration files on the radius server to be able to work with the HP AP.
Really? That is a horribly vague statement. And it doesn't agree
with what you said earlier.
You said previously you HAD changed something. I asked you what you
had changed. Your reply now is you think something needs to be changed.
I'm trying to help you, and you're giving vague and inconsistent
answers. This is not just annoying, you're making it impossible for me
to help you.
> I just can't find any documentation on using the HP AP with freeRadius although the specs for the AP says it should work.
There is likely no documentation on "HP and FR". Because there
doesn't need to be. HP documents how to configure the AP for RADIUS.
FreeRADIUS documents how to add a client. That's it. The vendor
In any case, the problem is likely not with the AP. The supplicant is
stopping the EAP conversation. As I said before. Fix the supplicant.
The web page in the debug output describes the common problems, and how
to fix them.
More information about the Freeradius-Users