Issue with DHCP with Wireless card
Hugh McLenaghan
hughmcl at hotmail.com
Thu Mar 13 19:35:54 CET 2014
OK, with IPSEC disabled it works, with IPSEC enabled it fails like before, however it does show the IP address in the from address, which is good.
I've looked at the packets and the only difference between ISC DHCP server and Freeradius is:-
ISC DHCP
Next Server IP Address: 0.0.0.0
Freeradius:
Next Server IP Address: 10.199.100.1
Everything else is the same, including the SRC/Destination IP addresses.
I need to find out now if there's a way to use ip route rules or something to bypass whatever is happening now *sigh* always something :)
Still would like to know why there is still a difference.
Here's a trace with Freeradius 3.0.2 with IPSEC DISABLED:-
Starting FreeRADIUS:radiusd: FreeRADIUS Version 3.0.2 (git #4c1edd5), for host armv6l-unknown-linux-gnu, built on Mar 13 2014 at 12:46:43
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/phptestauth
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/dhcp
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/eap
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/dhcp
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
main {
security {
allow_core_dumps = no
}
}
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
sbindir = "/usr/local/sbin"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret>>>
response_window = 20
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret>>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
radiusd: #### Instantiating modules ####
instantiate {
}
modules {
# Loaded module rlm_dynamic_clients
# Instantiating module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_logintime
# Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_exec
# Instantiating module "phptestauth" from file /usr/local/etc/raddb/mods-enabled/phptestauth
exec phptestauth {
wait = yes
program = "/usr/bin/php -f /usr/local/etc/raddb/scripts/hugh-test.php %{DHCP-Client-Hardware-Address}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_preprocess
# Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
# Loaded module rlm_soh
# Instantiating module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_dhcp
# Instantiating module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp
# Loaded module rlm_expr
# Instantiating module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
# Loaded module rlm_files
# Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
files {
filename = "/usr/local/etc/raddb/mods-config/files/authorize"
usersfile = "/usr/local/etc/raddb/mods-config/files/authorize"
acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
compat = "no"
}
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
# Loaded module rlm_always
# Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_replicate
# Instantiating module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
# Loaded module rlm_radutmp
# Instantiating module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/usr/local/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Instantiating module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_detail
# Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
detail {
filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
dir_permissions = 493
locking = no
log_packet_header = no
}
# Loaded module rlm_mschap
# Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
}
# Instantiating module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Instantiating module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_cache
# Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
cache cache_eap {
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 16384
epoch = 0
add_stats = no
}
# Loaded module rlm_pap
# Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
pap {
auto_header = no
normalise = yes
}
# Loaded module rlm_utf8
# Instantiating module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
# Loaded module rlm_chap
# Instantiating module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
# Loaded module rlm_realm
# Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_digest
# Instantiating module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
# Loaded module rlm_attr_filter
# Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
# Loaded module rlm_expiration
# Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
# Loaded module rlm_passwd
# Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
dir_permissions = 493
locking = no
log_packet_header = no
}
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
dir_permissions = 493
locking = no
log_packet_header = no
}
# Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
dir_permissions = 493
locking = no
log_packet_header = no
}
# Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
dir_permissions = 493
locking = no
log_packet_header = no
}
# Loaded module rlm_unix
# Instantiating module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
# Loaded module rlm_eap
# Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
mod_accounting_username_bug = no
max_sessions = 4096
}
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
ca_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
ca_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = <<< secret>>>
dh_file = "/usr/local/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = yes
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_method = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Loaded module rlm_linelog
# Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
linelog {
filename = "/usr/local/var/log/radius/linelog"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "%{%{Packet-Type}:-format}"
}
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server dhcp { # from file /usr/local/etc/raddb/sites-enabled/dhcp
# Loading dhcp DHCP-Discover {...}
# Loading dhcp DHCP-Request {...}
# Loading dhcp {...}
} # server dhcp
server default { # from file /usr/local/etc/raddb/sites-enabled/default
# Creating Auth-Type = digest
# Loading authenticate {...}
# Loading authorize {...}
WARNING: Ignoring "sql" (see raddb/mods-available/README.rst)
WARNING: Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "dhcp"
ipaddr = *
port = 67
src_ipaddr = 10.199.100.1
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on dhcp interface wlan0 address * port 67 as server dhcp
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 55398
Ready to process requests.
Received DHCP-Discover of id 1d3d4523 from 0.0.0.0:68 to 255.255.255.255:67
DHCP-Opcode = Client-Message
DHCP-Hardware-Type = Ethernet
DHCP-Hardware-Address-Length = 6
DHCP-Hop-Count = 0
DHCP-Transaction-Id = 490554659
DHCP-Number-of-Seconds = 3
DHCP-Flags = 0
DHCP-Client-IP-Address = 0.0.0.0
DHCP-Your-IP-Address = 0.0.0.0
DHCP-Server-IP-Address = 0.0.0.0
DHCP-Gateway-IP-Address = 0.0.0.0
DHCP-Client-Hardware-Address = 5c:0a:5b:11:0b:89
DHCP-Message-Type += DHCP-Discover
DHCP-Client-Identifier += 80:2a:e7:00:00:00
DHCP-DHCP-Maximum-Msg-Size += 1500
DHCP-Vendor-Class-Identifier += 'dhcpcd-5.5.6'
DHCP-Hostname += 'android-ad465a94ec6fe012'
DHCP-Parameter-Request-List += DHCP-Subnet-Mask
DHCP-Parameter-Request-List += DHCP-Static-Routes
DHCP-Parameter-Request-List += DHCP-Router-Address
DHCP-Parameter-Request-List += DHCP-Domain-Name-Server
DHCP-Parameter-Request-List += DHCP-Domain-Name
DHCP-Parameter-Request-List += DHCP-Interface-MTU-Size
DHCP-Parameter-Request-List += DHCP-Broadcast-Address
DHCP-Parameter-Request-List += DHCP-IP-Address-Lease-Time
DHCP-Parameter-Request-List += DHCP-Renewal-Time
DHCP-Parameter-Request-List += DHCP-Rebinding-Time
Trying sub-section dhcp DHCP-Discover {...}
(0) dhcp DHCP-Discover {
(0) update reply {
(0) DHCP-Message-Type = DHCP-Offer
(0) } # update reply = noop
(0) phptestauth : Executing: /usr/bin/php -f /usr/local/etc/raddb/scripts/hugh-test.php %{DHCP-Client-Hardware-Address}
(0) phptestauth : expand: "%{DHCP-Client-Hardware-Address}" -> '5c:0a:5b:11:0b:89'
(0) phptestauth : Program returned code (0) and output 'DHCP-Domain-Name-Server := 10.1.30.170, DHCP-Domain-Name-Server := 10.1.30.171, DHCP-IP-Address-Lease-Time := 7200, DHCP-Broadcast-Address := 10.199.100.15, DHCP-DHCP-Server-Identifier := 10.199.100.1, DHCP-Router-Address := 10.199.100.1, DHCP-Subnet-Mask := 255.255.255.240, DHCP-Server-Host-Name := 'wipi_1', DHCP-Your-IP-Address := 10.199.100.11, '
(0) phptestauth : Program executed successfully
(0) [phptestauth] = ok
(0) [ok] = ok
(0) } # dhcp DHCP-Discover = ok
(0) DHCP: Reply will be unicast to your-ip-address
DHCP-Opcode = Server-Message
DHCP-Hardware-Type = Ethernet
DHCP-Hardware-Address-Length = 6
DHCP-Hop-Count = 0
DHCP-Transaction-Id = 490554659
DHCP-Number-of-Seconds = 0
DHCP-Flags = 0
DHCP-Client-IP-Address = 0.0.0.0
DHCP-Your-IP-Address = 10.199.100.11
DHCP-Server-IP-Address = 10.199.100.1
DHCP-Gateway-IP-Address = 0.0.0.0
DHCP-Client-Hardware-Address = 5c:0a:5b:11:0b:89
DHCP-Server-Host-Name = 'wipi_1'
DHCP-Boot-Filename = ''
DHCP-Subnet-Mask := 255.255.255.240
DHCP-Router-Address := 10.199.100.1
DHCP-Domain-Name-Server := 10.1.30.170
DHCP-Domain-Name-Server := 10.1.30.171
DHCP-Broadcast-Address := 10.199.100.15
DHCP-IP-Address-Lease-Time := 7200
DHCP-DHCP-Server-Identifier := 10.199.100.1
DHCP-DHCP-Maximum-Msg-Size += 1500
Sending DHCP-Offer of id 1d3d4523 from 10.199.100.1:67 to 10.199.100.11:68
(0) Finished request 0.
Waking up in 4.9 seconds.
Received DHCP-Request of id 1d3d4523 from 0.0.0.0:68 to 255.255.255.255:67
(0) Cleaning up request packet ID 490554659 with timestamp +12
DHCP-Opcode = Client-Message
DHCP-Hardware-Type = Ethernet
DHCP-Hardware-Address-Length = 6
DHCP-Hop-Count = 0
DHCP-Transaction-Id = 490554659
DHCP-Number-of-Seconds = 7
DHCP-Flags = 0
DHCP-Client-IP-Address = 0.0.0.0
DHCP-Your-IP-Address = 0.0.0.0
DHCP-Server-IP-Address = 0.0.0.0
DHCP-Gateway-IP-Address = 0.0.0.0
DHCP-Client-Hardware-Address = 5c:0a:5b:11:0b:89
DHCP-Message-Type += DHCP-Request
DHCP-Client-Identifier += f0:23:e7:00:00:00
DHCP-Requested-IP-Address += 10.199.100.11
DHCP-DHCP-Server-Identifier += 10.199.100.1
DHCP-DHCP-Maximum-Msg-Size += 1500
DHCP-Vendor-Class-Identifier += 'dhcpcd-5.5.6'
DHCP-Hostname += 'android-ad465a94ec6fe012'
DHCP-Parameter-Request-List += DHCP-Subnet-Mask
DHCP-Parameter-Request-List += DHCP-Static-Routes
DHCP-Parameter-Request-List += DHCP-Router-Address
DHCP-Parameter-Request-List += DHCP-Domain-Name-Server
DHCP-Parameter-Request-List += DHCP-Domain-Name
DHCP-Parameter-Request-List += DHCP-Interface-MTU-Size
DHCP-Parameter-Request-List += DHCP-Broadcast-Address
DHCP-Parameter-Request-List += DHCP-IP-Address-Lease-Time
DHCP-Parameter-Request-List += DHCP-Renewal-Time
DHCP-Parameter-Request-List += DHCP-Rebinding-Time
Trying sub-section dhcp DHCP-Request {...}
(1) dhcp DHCP-Request {
(1) update reply {
(1) DHCP-Message-Type = DHCP-Ack
(1) } # update reply = noop
(1) phptestauth : Executing: /usr/bin/php -f /usr/local/etc/raddb/scripts/hugh-test.php %{DHCP-Client-Hardware-Address}
(1) phptestauth : expand: "%{DHCP-Client-Hardware-Address}" -> '5c:0a:5b:11:0b:89'
(1) phptestauth : Program returned code (0) and output 'DHCP-Domain-Name-Server := 10.1.30.170, DHCP-Domain-Name-Server := 10.1.30.171, DHCP-IP-Address-Lease-Time := 7200, DHCP-Broadcast-Address := 10.199.100.15, DHCP-DHCP-Server-Identifier := 10.199.100.1, DHCP-Router-Address := 10.199.100.1, DHCP-Subnet-Mask := 255.255.255.240, DHCP-Server-Host-Name := 'wipi_1', DHCP-Your-IP-Address := 10.199.100.11, '
(1) phptestauth : Program executed successfully
(1) [phptestauth] = ok
(1) [ok] = ok
(1) } # dhcp DHCP-Request = ok
(1) DHCP: Reply will be unicast to your-ip-address
DHCP-Opcode = Server-Message
DHCP-Hardware-Type = Ethernet
DHCP-Hardware-Address-Length = 6
DHCP-Hop-Count = 0
DHCP-Transaction-Id = 490554659
DHCP-Number-of-Seconds = 0
DHCP-Flags = 0
DHCP-Client-IP-Address = 0.0.0.0
DHCP-Your-IP-Address = 10.199.100.11
DHCP-Server-IP-Address = 10.199.100.1
DHCP-Gateway-IP-Address = 0.0.0.0
DHCP-Client-Hardware-Address = 5c:0a:5b:11:0b:89
DHCP-Server-Host-Name = 'wipi_1'
DHCP-Boot-Filename = ''
DHCP-Subnet-Mask := 255.255.255.240
DHCP-Router-Address := 10.199.100.1
DHCP-Domain-Name-Server := 10.1.30.170
DHCP-Domain-Name-Server := 10.1.30.171
DHCP-Broadcast-Address := 10.199.100.15
DHCP-IP-Address-Lease-Time := 7200
DHCP-DHCP-Server-Identifier := 10.199.100.1
DHCP-DHCP-Maximum-Msg-Size += 1500
Sending DHCP-Ack of id 1d3d4523 from 10.199.100.1:67 to 10.199.100.11:68
(1) Finished request 1.
Waking up in 4.9 seconds.
Received DHCP-Request of id 8d42b684 from 0.0.0.0:68 to 255.255.255.255:67
DHCP-Opcode = Client-Message
DHCP-Hardware-Type = Ethernet
DHCP-Hardware-Address-Length = 6
DHCP-Hop-Count = 0
DHCP-Transaction-Id = 2369959556
DHCP-Number-of-Seconds = 0
DHCP-Flags = 0
DHCP-Client-IP-Address = 0.0.0.0
DHCP-Your-IP-Address = 0.0.0.0
DHCP-Server-IP-Address = 0.0.0.0
DHCP-Gateway-IP-Address = 0.0.0.0
DHCP-Client-Hardware-Address = 5c:0a:5b:11:0b:89
DHCP-Message-Type += DHCP-Request
DHCP-Client-Identifier += 98:39:e7:00:00:00
DHCP-Requested-IP-Address += 10.199.100.11
DHCP-DHCP-Maximum-Msg-Size += 1500
DHCP-Vendor-Class-Identifier += 'dhcpcd-5.5.6'
DHCP-Hostname += 'android-ad465a94ec6fe012'
DHCP-Parameter-Request-List += DHCP-Subnet-Mask
DHCP-Parameter-Request-List += DHCP-Static-Routes
DHCP-Parameter-Request-List += DHCP-Router-Address
DHCP-Parameter-Request-List += DHCP-Domain-Name-Server
DHCP-Parameter-Request-List += DHCP-Domain-Name
DHCP-Parameter-Request-List += DHCP-Interface-MTU-Size
DHCP-Parameter-Request-List += DHCP-Broadcast-Address
DHCP-Parameter-Request-List += DHCP-IP-Address-Lease-Time
DHCP-Parameter-Request-List += DHCP-Renewal-Time
DHCP-Parameter-Request-List += DHCP-Rebinding-Time
Trying sub-section dhcp DHCP-Request {...}
(2) dhcp DHCP-Request {
(2) update reply {
(2) DHCP-Message-Type = DHCP-Ack
(2) } # update reply = noop
(2) phptestauth : Executing: /usr/bin/php -f /usr/local/etc/raddb/scripts/hugh-test.php %{DHCP-Client-Hardware-Address}
(2) phptestauth : expand: "%{DHCP-Client-Hardware-Address}" -> '5c:0a:5b:11:0b:89'
(2) phptestauth : Program returned code (0) and output 'DHCP-Domain-Name-Server := 10.1.30.170, DHCP-Domain-Name-Server := 10.1.30.171, DHCP-IP-Address-Lease-Time := 7200, DHCP-Broadcast-Address := 10.199.100.15, DHCP-DHCP-Server-Identifier := 10.199.100.1, DHCP-Router-Address := 10.199.100.1, DHCP-Subnet-Mask := 255.255.255.240, DHCP-Server-Host-Name := 'wipi_1', DHCP-Your-IP-Address := 10.199.100.11, '
(2) phptestauth : Program executed successfully
(2) [phptestauth] = ok
(2) [ok] = ok
(2) } # dhcp DHCP-Request = ok
(2) DHCP: Reply will be unicast to your-ip-address
DHCP-Opcode = Server-Message
DHCP-Hardware-Type = Ethernet
DHCP-Hardware-Address-Length = 6
DHCP-Hop-Count = 0
DHCP-Transaction-Id = 2369959556
DHCP-Number-of-Seconds = 0
DHCP-Flags = 0
DHCP-Client-IP-Address = 0.0.0.0
DHCP-Your-IP-Address = 10.199.100.11
DHCP-Server-IP-Address = 10.199.100.1
DHCP-Gateway-IP-Address = 0.0.0.0
DHCP-Client-Hardware-Address = 5c:0a:5b:11:0b:89
DHCP-Server-Host-Name = 'wipi_1'
DHCP-Boot-Filename = ''
DHCP-Subnet-Mask := 255.255.255.240
DHCP-Router-Address := 10.199.100.1
DHCP-Domain-Name-Server := 10.1.30.170
DHCP-Domain-Name-Server := 10.1.30.171
DHCP-Broadcast-Address := 10.199.100.15
DHCP-IP-Address-Lease-Time := 7200
DHCP-DHCP-Server-Identifier := 10.199.100.1
DHCP-DHCP-Maximum-Msg-Size += 1500
Sending DHCP-Ack of id 8d42b684 from 10.199.100.1:67 to 10.199.100.11:68
(2) Finished request 2.
Waking up in 2.9 seconds.
(1) Cleaning up request packet ID 490554659 with timestamp +16
Waking up in 2.0 seconds.
----------------------------------------
> From: hughmcl at hotmail.com
> To: freeradius-users at lists.freeradius.org
> Subject: RE: Issue with DHCP with Wireless card
> Date: Thu, 13 Mar 2014 11:07:11 -0500
>
> I Had checked out 3.1.0 (accidentally), now checking out 3.0.2 and starting re-build.
>
>
> Here's the debug from the 3.1.0:-
>
>
>
> Starting FreeRADIUS:radiusd: FreeRADIUS Version 3.1.0 (git #b71e353), for host armv6l-unknown-linux-gnu, built on Mar 13 2014 at 10:26:08
> Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/local/share/freeradius/dictionary
> including dictionary file /usr/local/etc/raddb/dictionary
> including configuration file /usr/local/etc/raddb/radiusd.conf
> including configuration file /usr/local/etc/raddb/proxy.conf
> including configuration file /usr/local/etc/raddb/clients.conf
> including files in directory /usr/local/etc/raddb/mods-enabled/
> including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
> including configuration file /usr/local/etc/raddb/mods-enabled/logintime
> including configuration file /usr/local/etc/raddb/mods-enabled/phptestauth
> including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
> including configuration file /usr/local/etc/raddb/mods-enabled/soh
> including configuration file /usr/local/etc/raddb/mods-enabled/dhcp
> including configuration file /usr/local/etc/raddb/mods-enabled/expr
> including configuration file /usr/local/etc/raddb/mods-enabled/files
> including configuration file /usr/local/etc/raddb/mods-enabled/always
> including configuration file /usr/local/etc/raddb/mods-enabled/replicate
> including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
> including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
> including configuration file /usr/local/etc/raddb/mods-enabled/detail
> including configuration file /usr/local/etc/raddb/mods-enabled/mschap
> including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
> including configuration file /usr/local/etc/raddb/mods-enabled/exec
> including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
> including configuration file /usr/local/etc/raddb/mods-enabled/pap
> including configuration file /usr/local/etc/raddb/mods-enabled/utf8
> including configuration file /usr/local/etc/raddb/mods-enabled/chap
> including configuration file /usr/local/etc/raddb/mods-enabled/realm
> including configuration file /usr/local/etc/raddb/mods-enabled/digest
> including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
> including configuration file /usr/local/etc/raddb/mods-enabled/expiration
> including configuration file /usr/local/etc/raddb/mods-enabled/passwd
> including configuration file /usr/local/etc/raddb/mods-enabled/echo
> including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
> including configuration file /usr/local/etc/raddb/mods-enabled/unix
> including configuration file /usr/local/etc/raddb/mods-enabled/eap
> including configuration file /usr/local/etc/raddb/mods-enabled/linelog
> including files in directory /usr/local/etc/raddb/policy.d/
> including configuration file /usr/local/etc/raddb/policy.d/control
> including configuration file /usr/local/etc/raddb/policy.d/dhcp
> including configuration file /usr/local/etc/raddb/policy.d/canonicalization
> including configuration file /usr/local/etc/raddb/policy.d/cui
> including configuration file /usr/local/etc/raddb/policy.d/operator-name
> including configuration file /usr/local/etc/raddb/policy.d/accounting
> including configuration file /usr/local/etc/raddb/policy.d/filter
> including configuration file /usr/local/etc/raddb/policy.d/eap
> including files in directory /usr/local/etc/raddb/sites-enabled/
> including configuration file /usr/local/etc/raddb/sites-enabled/dhcp
> including configuration file /usr/local/etc/raddb/sites-enabled/default
> including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
> main {
> security {
> allow_core_dumps = no
> }
> }
> main {
> name = "radiusd"
> prefix = "/usr/local"
> localstatedir = "/usr/local/var"
> sbindir = "/usr/local/sbin"
> logdir = "/usr/local/var/log/radius"
> run_dir = "/usr/local/var/run/radiusd"
> libdir = "/usr/local/lib"
> radacctdir = "/usr/local/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 1024
> pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
> checkrad = "/usr/local/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> }
> security {
> max_attributes = 200
> reject_delay = 1
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret>>>
> response_window = 20
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> num_answers_to_alive = 3
> revive_interval = 120
> status_check_timeout = 4
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret>>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> radiusd: #### Instantiating modules ####
> instantiate {
> }
> modules {
> # Loaded module rlm_dynamic_clients
> # Instantiating module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
> # Loaded module rlm_logintime
> # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_exec
> # Instantiating module "phptestauth" from file /usr/local/etc/raddb/mods-enabled/phptestauth
> exec phptestauth {
> wait = yes
> program = "/usr/bin/php -f /usr/local/etc/raddb/scripts/hugh-test.php %{DHCP-Client-Hardware-Address}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loaded module rlm_preprocess
> # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
> preprocess {
> huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
> hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
> reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
> # Loaded module rlm_soh
> # Instantiating module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loaded module rlm_dhcp
> # Instantiating module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp
> # Loaded module rlm_expr
> # Instantiating module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
> expr {
> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> }
> # Loaded module rlm_files
> # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
> files {
> filename = "/usr/local/etc/raddb/mods-config/files/authorize"
> usersfile = "/usr/local/etc/raddb/mods-config/files/authorize"
> acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
> preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
> compat = "no"
> }
> reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
> reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
> reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
> reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
> # Loaded module rlm_always
> # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_replicate
> # Instantiating module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
> # Loaded module rlm_radutmp
> # Instantiating module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/usr/local/var/log/radius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Instantiating module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_detail
> # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
> detail {
> filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> dir_permissions = 493
> locking = no
> log_packet_header = no
> }
> # Loaded module rlm_mschap
> # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> }
> # Instantiating module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
> radutmp {
> filename = "/usr/local/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Instantiating module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_cache
> # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
> cache cache_eap {
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 16384
> epoch = 0
> add_stats = no
> }
> # Loaded module rlm_pap
> # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
> pap {
> auto_header = no
> normalise = yes
> }
> # Loaded module rlm_utf8
> # Instantiating module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
> # Loaded module rlm_chap
> # Instantiating module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
> # Loaded module rlm_realm
> # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_digest
> # Instantiating module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
> # Loaded module rlm_attr_filter
> # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
> # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
> # Loaded module rlm_expiration
> # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
> # Loaded module rlm_passwd
> # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> detail auth_log {
> filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> dir_permissions = 493
> locking = no
> log_packet_header = no
> }
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
> # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> detail reply_log {
> filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> dir_permissions = 493
> locking = no
> log_packet_header = no
> }
> # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> detail pre_proxy_log {
> filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> dir_permissions = 493
> locking = no
> log_packet_header = no
> }
> # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> detail post_proxy_log {
> filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> dir_permissions = 493
> locking = no
> log_packet_header = no
> }
> # Loaded module rlm_unix
> # Instantiating module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
> unix {
> radwtmp = "/usr/local/var/log/radius/radwtmp"
> }
> # Loaded module rlm_eap
> # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
> eap {
> default_eap_type = "md5"
> timer_expire = 60
> ignore_unknown_eap_types = no
> mod_accounting_username_bug = no
> max_sessions = 4096
> }
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_leap
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> rsa_key_exchange = no
> dh_key_exchange = yes
> rsa_key_length = 512
> dh_key_length = 512
> verify_depth = 0
> ca_path = "/usr/local/etc/raddb/certs"
> pem_file_type = yes
> private_key_file = "/usr/local/etc/raddb/certs/server.pem"
> certificate_file = "/usr/local/etc/raddb/certs/server.pem"
> ca_file = "/usr/local/etc/raddb/certs/ca.pem"
> private_key_password = <<< secret>>>
> dh_file = "/usr/local/etc/raddb/certs/dh"
> fragment_size = 1024
> include_length = yes
> check_crl = no
> cipher_list = "DEFAULT"
> ecdh_curve = "prime256v1"
> cache {
> enable = yes
> lifetime = 24
> max_entries = 255
> }
> verify {
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = yes
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_method = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Loaded module rlm_linelog
> # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
> linelog {
> filename = "/usr/local/var/log/radius/linelog"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "%{%{Packet-Type}:-format}"
> }
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /usr/local/etc/raddb/radiusd.conf
> } # server
> server dhcp { # from file /usr/local/etc/raddb/sites-enabled/dhcp
> # Loading dhcp DHCP-Discover {...}
> # Loading dhcp DHCP-Request {...}
> # Loading dhcp {...}
> } # server dhcp
> server default { # from file /usr/local/etc/raddb/sites-enabled/default
> # Creating Auth-Type = digest
> # Loading authenticate {...}
> # Loading authorize {...}
> WARNING: Ignoring "sql" (see raddb/mods-available/README.rst)
> WARNING: Ignoring "ldap" (see raddb/mods-available/README.rst)
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server default
> server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server inner-tunnel
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "dhcp"
> ipaddr = *
> port = 67
> WARNING: No "interface" setting is defined. Only unicast DHCP will work.
> src_ipaddr = 10.199.100.1
> }
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> Listening on dhcp address * port 67 as server dhcp
> Listening on auth address * port 1812 as server default
> Listening on acct address * port 1813 as server default
> Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
> Opening new proxy socket 'proxy address * port 1814'
> Listening on proxy address * port 1814
> Ready to process requests
> Received DHCP-Request of id 4fca2bd4 from 0.0.0.0:68 to 255.255.255.255:67
> DHCP-Opcode = Client-Message
> DHCP-Hardware-Type = Ethernet
> DHCP-Hardware-Address-Length = 6
> DHCP-Hop-Count = 0
> DHCP-Transaction-Id = 1338649556
> DHCP-Number-of-Seconds = 0
> DHCP-Flags = 0
> DHCP-Client-IP-Address = 0.0.0.0
> DHCP-Your-IP-Address = 0.0.0.0
> DHCP-Server-IP-Address = 0.0.0.0
> DHCP-Gateway-IP-Address = 0.0.0.0
> DHCP-Client-Hardware-Address = 5c:0a:5b:11:0b:89
> DHCP-Message-Type += DHCP-Request
> DHCP-Client-Identifier += 20:01:51:01:00:00
> DHCP-Requested-IP-Address += 10.1.10.105
> DHCP-DHCP-Maximum-Msg-Size += 1500
> DHCP-Vendor-Class-Identifier += 'dhcpcd-5.5.6'
> DHCP-Hostname += 'android-ad465a94ec6fe012'
> DHCP-Parameter-Request-List += DHCP-Subnet-Mask
> DHCP-Parameter-Request-List += DHCP-Static-Routes
> DHCP-Parameter-Request-List += DHCP-Router-Address
> DHCP-Parameter-Request-List += DHCP-Domain-Name-Server
> DHCP-Parameter-Request-List += DHCP-Domain-Name
> DHCP-Parameter-Request-List += DHCP-Interface-MTU-Size
> DHCP-Parameter-Request-List += DHCP-Broadcast-Address
> DHCP-Parameter-Request-List += DHCP-IP-Address-Lease-Time
> DHCP-Parameter-Request-List += DHCP-Renewal-Time
> DHCP-Parameter-Request-List += DHCP-Rebinding-Time
> Trying sub-section dhcp DHCP-Request {...}
> (0) dhcp DHCP-Request {
> (0) update reply {
> (0) DHCP-Message-Type = DHCP-Ack
> (0) } # update reply = noop
> (0) phptestauth : Executing: /usr/bin/php -f /usr/local/etc/raddb/scripts/hugh-test.php %{DHCP-Client-Hardware-Address}
> (0) phptestauth : expand: "%{DHCP-Client-Hardware-Address}" -> '5c:0a:5b:11:0b:89'
> (0) phptestauth : Program returned code (0) and output 'DHCP-Domain-Name-Server := 10.1.30.170, DHCP-Domain-Name-Server := 10.1.30.171, DHCP-IP-Address-Lease-Time := 7200, DHCP-Broadcast-Address := 10.199.100.15, DHCP-DHCP-Server-Identifier := 10.199.100.1, DHCP-Router-Address := 10.199.100.1, DHCP-Subnet-Mask := 255.255.255.240, DHCP-Server-Host-Name := 'wipi_1', DHCP-Your-IP-Address := 10.199.100.9, '
> (0) phptestauth : Program executed successfully
> (0) [phptestauth] = ok
> (0) [ok] = ok
> (0) } # dhcp DHCP-Request = ok
> (0) DHCP: Reply will be unicast to giaddr from original packet
> DHCP-Opcode = Server-Message
> DHCP-Hardware-Type = Ethernet
> DHCP-Hardware-Address-Length = 6
> DHCP-Hop-Count = 0
> DHCP-Transaction-Id = 1338649556
> DHCP-Number-of-Seconds = 0
> DHCP-Flags = 0
> DHCP-Client-IP-Address = 0.0.0.0
> DHCP-Your-IP-Address = 10.199.100.9
> DHCP-Server-IP-Address = 10.199.100.1
> DHCP-Gateway-IP-Address = 0.0.0.0
> DHCP-Client-Hardware-Address = 5c:0a:5b:11:0b:89
> DHCP-Server-Host-Name = 'wipi_1'
> DHCP-Boot-Filename = ''
> DHCP-Subnet-Mask := 255.255.255.240
> DHCP-Router-Address := 10.199.100.1
> DHCP-Domain-Name-Server := 10.1.30.170
> DHCP-Domain-Name-Server := 10.1.30.171
> DHCP-Broadcast-Address := 10.199.100.15
> DHCP-IP-Address-Lease-Time := 7200
> DHCP-DHCP-Server-Identifier := 10.199.100.1
> DHCP-DHCP-Maximum-Msg-Size += 1500
> Sending DHCP-Ack of id 4fca2bd4 from 10.199.100.1:67 to 2.0.0.0:68
> (0) Finished request 0.
> Waking up in 4.9 seconds.
> Received DHCP-Request of id 4fca2bd4 from 0.0.0.0:68 to 255.255.255.255:67
> Sending DHCP-Ack of id 4fca2bd4 from 10.199.100.1:67 to 2.0.0.0:68
> Waking up in 999995.7 seconds.
> Received DHCP-Discover of id 6e47403d from 0.0.0.0:68 to 255.255.255.255:67
> DHCP-Opcode = Client-Message
> DHCP-Hardware-Type = Ethernet
> DHCP-Hardware-Address-Length = 6
> DHCP-Hop-Count = 0
> DHCP-Transaction-Id = 1850163261
> DHCP-Number-of-Seconds = 5
> DHCP-Flags = 0
> DHCP-Client-IP-Address = 0.0.0.0
> DHCP-Your-IP-Address = 0.0.0.0
> DHCP-Server-IP-Address = 0.0.0.0
> DHCP-Gateway-IP-Address = 0.0.0.0
> DHCP-Client-Hardware-Address = 5c:0a:5b:11:0b:89
> DHCP-Message-Type += DHCP-Discover
> DHCP-Client-Identifier += a0:09:51:01:00:00
> DHCP-DHCP-Maximum-Msg-Size += 1500
> DHCP-Vendor-Class-Identifier += 'dhcpcd-5.5.6'
> DHCP-Hostname += 'android-ad465a94ec6fe012'
> DHCP-Parameter-Request-List += DHCP-Subnet-Mask
> DHCP-Parameter-Request-List += DHCP-Static-Routes
> DHCP-Parameter-Request-List += DHCP-Router-Address
> DHCP-Parameter-Request-List += DHCP-Domain-Name-Server
> DHCP-Parameter-Request-List += DHCP-Domain-Name
> DHCP-Parameter-Request-List += DHCP-Interface-MTU-Size
> DHCP-Parameter-Request-List += DHCP-Broadcast-Address
> DHCP-Parameter-Request-List += DHCP-IP-Address-Lease-Time
> DHCP-Parameter-Request-List += DHCP-Renewal-Time
> DHCP-Parameter-Request-List += DHCP-Rebinding-Time
> Trying sub-section dhcp DHCP-Discover {...}
> (1) dhcp DHCP-Discover {
> (1) update reply {
> (1) DHCP-Message-Type = DHCP-Offer
> (1) } # update reply = noop
> (1) phptestauth : Executing: /usr/bin/php -f /usr/local/etc/raddb/scripts/hugh-test.php %{DHCP-Client-Hardware-Address}
> (1) phptestauth : expand: "%{DHCP-Client-Hardware-Address}" -> '5c:0a:5b:11:0b:89'
> (1) phptestauth : Program returned code (0) and output 'DHCP-Domain-Name-Server := 10.1.30.170, DHCP-Domain-Name-Server := 10.1.30.171, DHCP-IP-Address-Lease-Time := 7200, DHCP-Broadcast-Address := 10.199.100.15, DHCP-DHCP-Server-Identifier := 10.199.100.1, DHCP-Router-Address := 10.199.100.1, DHCP-Subnet-Mask := 255.255.255.240, DHCP-Server-Host-Name := 'wipi_1', DHCP-Your-IP-Address := 10.199.100.9, '
> (1) phptestauth : Program executed successfully
> (1) [phptestauth] = ok
> (1) [ok] = ok
> (1) } # dhcp DHCP-Discover = ok
> (1) DHCP: Reply will be unicast to giaddr from original packet
> DHCP-Opcode = Server-Message
> DHCP-Hardware-Type = Ethernet
> DHCP-Hardware-Address-Length = 6
> DHCP-Hop-Count = 0
> DHCP-Transaction-Id = 1850163261
> DHCP-Number-of-Seconds = 0
> DHCP-Flags = 0
> DHCP-Client-IP-Address = 0.0.0.0
> DHCP-Your-IP-Address = 10.199.100.9
> DHCP-Server-IP-Address = 10.199.100.1
> DHCP-Gateway-IP-Address = 0.0.0.0
> DHCP-Client-Hardware-Address = 5c:0a:5b:11:0b:89
> DHCP-Server-Host-Name = 'wipi_1'
> DHCP-Boot-Filename = ''
> DHCP-Subnet-Mask := 255.255.255.240
> DHCP-Router-Address := 10.199.100.1
> DHCP-Domain-Name-Server := 10.1.30.170
> DHCP-Domain-Name-Server := 10.1.30.171
> DHCP-Broadcast-Address := 10.199.100.15
> DHCP-IP-Address-Lease-Time := 7200
> DHCP-DHCP-Server-Identifier := 10.199.100.1
> DHCP-DHCP-Maximum-Msg-Size += 1500
> Sending DHCP-Offer of id 6e47403d from 10.199.100.1:67 to 2.0.0.0:68
> (1) Finished request 1.
> Waking up in 4.9 seconds.
>
>
> ----------------------------------------
>> Date: Thu, 13 Mar 2014 10:27:25 -0400
>> From: aland at deployingradius.com
>> To: freeradius-users at lists.freeradius.org
>> Subject: Re: Issue with DHCP with Wireless card
>>
>> Hugh McLenaghan wrote:
>>> When i set this up before I didn't have an IPSEC VPN set up and I got it working.
>>> When I came back to work on it, I had set up an IPSEC VPN in the meantime. Now freeradius wasn't working for DHCP, however ISC DHCPD WAS working. So i was assuming it was completely an issue with freeradius. It does have an issue causing the problem, however it has at least identified WHY things are broken for me!
>>
>> OK. DHCP gets tricky with multiple interfaces.
>>
>>> So i have 2 rules in my ipsec-tools.conf file:-
>>>
>>> spdadd 10.199.100.0/28 0.0.0.0/0 any -P out ipsec
>>> esp/tunnel/yy.yy.yy.yy-xx.xx.xx.xx/require;
>>> spdadd 0.0.0.0/0 10.199.100.0/28 any -P in ipsec
>>> esp/tunnel/xx.xx.xx.xx-yy.yy.yy.yy/require;
>>
>> Hmm... DHCP works via broadcast on the local network, and broadcast
>> traffic isn't routed.
>>
>>> NOW, what's happening is that the freeradius DHCP server is sending the reply packets FROM 0.0.0.0 to the 10.199.100.x network.
>>
>> It's not supposed to do that. The should be sending a reply FROM it's
>> own IP address, not 0.0.0.0. However... if it can't discover the
>> interfaces IP address, it just uses 0.0.0.0. ISC DHCP has code to troll
>> through all of the addresses for an interface, and then uses that.
>>
>>> So I guess to fully fix the freeradius DHCP we need to try to get the SRC address of the reply packets coming from the Interface IP and not from 0.0.0.0
>>
>> Done. There's more it can do, but that can wait until after 3.0.2.
>>
>>> If I can help in any way, PLEASE let me know.
>>
>> This helps enormously. I've pushed a fix. You can either grab the
>> "v3.0.x" branch from git && re-build, or you can edit your current
>> configuration, and do:
>>
>> listen {
>> type = dhcp
>> ipaddr = *
>> src_ipaddr = 10.199.100.1 # add this
>> }
>>
>>
>> I've also added documentation for the src_ipaddr configuration ite,
>>
>>> I'd like to get this resolved, since the features in freeradius are worth it :) Well done on all the features, it's a great product.
>>
>> Thanks. We try hard to make FreeRADIUS crush ISC DHCPd. :)
>>
>> Alan DeKok.
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list