Fwd: free radius 3.0.2 not reading nas clients from daloradius db

Abdullah b.hawks123 at gmail.com
Sun Oct 12 12:26:32 CEST 2014


just noticed log files not attached correctly, reattaching

On Sun, Oct 12, 2014 at 12:07 PM, Abdullah <b.hawks123 at gmail.com> wrote:

> apologies for not adding initial part of radiusd -X
> its attached now
>
> On Sun, Oct 12, 2014 at 11:34 AM, Abdullah <b.hawks123 at gmail.com> wrote:
>
>> thanks for your reply earlier.
>> On freeradius 3.0.4, i get teh error "no known good password found for
>> the user"
>> radiusd log is attached
>>
>>
>> On Sat, Oct 11, 2014 at 9:16 PM, Alan DeKok <aland at deployingradius.com>
>> wrote:
>>
>>> Abdullah wrote:
>>> > I have setup freeradius 3.0.2
>>>
>>>   Please use 3.0.4.
>>>
>>>   Alan DeKok.
>>> -
>>> List info/subscribe/unsubscribe? See
>>> http://www.freeradius.org/list/users.html
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20141012/809a8157/attachment-0001.html>
-------------- next part --------------
Received Access-Request Id 117 from 127.0.0.1:41419 to 127.0.0.1:1812 length 75
	User-Name = 'test1'
	User-Password = 'test123'
	NAS-IP-Address = 127.0.0.1
	NAS-Port = 0
	Message-Authenticator = 0x7afeb483bca4844037f125f4a2026b3c
(0) Received Access-Request packet from host 127.0.0.1 port 41419, id=117, length=75
(0) 	User-Name = 'test1'
(0) 	User-Password = 'test123'
(0) 	NAS-IP-Address = 127.0.0.1
(0) 	NAS-Port = 0
(0) 	Message-Authenticator = 0x7afeb483bca4844037f125f4a2026b3c
(0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(0)   authorize {
(0)   filter_username filter_username {
(0)     if (!&User-Name) 
(0)     if (!&User-Name)  -> FALSE
(0)     if (&User-Name =~ / /) 
(0)     if (&User-Name =~ / /)  -> FALSE
(0)     if (&User-Name =~ /@.*@/ ) 
(0)     if (&User-Name =~ /@.*@/ )  -> FALSE
(0)     if (&User-Name =~ /\\.\\./ ) 
(0)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(0)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))  
(0)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(0)     if (&User-Name =~ /\\.$/)  
(0)     if (&User-Name =~ /\\.$/)   -> FALSE
(0)     if (&User-Name =~ /@\\./)  
(0)     if (&User-Name =~ /@\\./)   -> FALSE
(0)   } # filter_username filter_username = notfound
(0)   [preprocess] = ok
(0)   [chap] = noop
(0)   [mschap] = noop
(0)   [digest] = noop
(0)  suffix : Checking for suffix after "@"
(0)  suffix : No '@' in User-Name = "test1", looking up realm NULL
(0)  suffix : No such realm "NULL"
(0)   [suffix] = noop
(0)  eap : No EAP-Message, not doing EAP
(0)   [eap] = noop
(0)   [expiration] = noop
(0)   [logintime] = noop
(0)  WARNING: pap : No "known good" password found for the user.  Not setting Auth-Type
(0)  WARNING: pap : Authentication will fail unless a "known good" password is available
(0)   [pap] = noop
(0)  } #  authorize = ok
(0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject
(0) Failed to authenticate the user
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0)  Post-Auth-Type REJECT {
(0)  attr_filter.access_reject : EXPAND %{User-Name}
(0)  attr_filter.access_reject :    --> test1
(0)  attr_filter.access_reject : Matched entry DEFAULT at line 11
(0)   [attr_filter.access_reject] = updated
(0)  eap : Request didn't contain an EAP-Message, not inserting EAP-Failure
(0)   [eap] = noop
(0)   remove_reply_message_if_eap remove_reply_message_if_eap {
(0)     if (&reply:EAP-Message && &reply:Reply-Message) 
(0)     if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)    else else {
(0)     [noop] = noop
(0)    } # else else = noop
(0)   } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(0)  } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(0) Sending delayed response
(0) Sending Access-Reject packet to host 127.0.0.1 port 41419, id=117, length=0
Sending Access-Reject Id 117 from 127.0.0.1:1812 to 127.0.0.1:41419
-------------- next part --------------
radiusd: FreeRADIUS Version 3.0.2, for host x86_64-unknown-linux-gnu, built on Jun 16 2014 at 07:36:25
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/sql
including configuration file /usr/local/etc/raddb/mods-config/sql/main/mysql/queries.conf
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/dhcp
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file /usr/local/etc/raddb/sites-enabled/default
main {
 security {
 	allow_core_dumps = no
 }
}
main {
	name = "radiusd"
	prefix = "/usr/local"
	localstatedir = "/usr/local/var"
	sbindir = "/usr/local/sbin"
	logdir = "/usr/local/var/log/radius"
	run_dir = "/usr/local/var/run/radiusd"
	libdir = "/usr/local/lib"
	radacctdir = "/usr/local/var/log/radius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 1024
	pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
	checkrad = "/usr/local/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 security {
 	max_attributes = 200
 	reject_delay = 1
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	num_answers_to_alive = 3
 	revive_interval = 120
 	status_check_timeout = 4
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_exec
  # Instantiating module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Instantiating module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
  # Loaded module rlm_files
  # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
  files {
  	filename = "/usr/local/etc/raddb/mods-config/files/authorize"
  	usersfile = "/usr/local/etc/raddb/mods-config/files/authorize"
  	acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
  	preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
  	compat = "no"
  }
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_detail
  # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail auth_log {
  	filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  	filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_sql
  # Instantiating module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
  sql {
  	driver = "rlm_sql_null"
  	server = "localhost"
  	port = ""
  	login = ""
  	password = <<< secret >>>
  	radius_db = "radius"
  	read_groups = yes
  	read_clients = yes
  	delete_stale_sessions = yes
  	sql_user_name = "%{User-Name}"
  	default_user_profile = ""
  	client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
  	authorize_check_query = "#	SELECT id, username, attribute, value, op #	FROM radcheck #	WHERE username = BINARY '%{SQL-User-Name}' #	ORDER BY id"
  	authorize_reply_query = "#	SELECT id, username, attribute, value, op #	FROM radreply #	WHERE username = BINARY '%{SQL-User-Name}' #	ORDER BY id"
  	authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id"
  	authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id"
  	group_membership_query = "#	SELECT groupname #	FROM radusergroup #	WHERE username = BINARY '%{SQL-User-Name}' #	ORDER BY priority"
  	simul_count_query = ""
  	simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
   accounting {
   	reference = "%{tolower:type.%{Acct-Status-Type}.query}"
   }
   post-auth {
   	reference = ".query"
   }
rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and linked
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
   	start = 5
   	min = 4
   	max = 32
   	spare = 3
   	uses = 0
   	lifetime = 0
   	cleanup_interval = 30
   	idle_timeout = 60
   	retry_delay = 1
   	spread = no
   }
rlm_sql (sql): Opening additional connection (0)
rlm_sql (sql): Opening additional connection (1)
rlm_sql (sql): Opening additional connection (2)
rlm_sql (sql): Opening additional connection (3)
rlm_sql (sql): Opening additional connection (4)
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'SELECT id, nasname, shortname, type, secret, server FROM nas'
rlm_sql (sql): Released connection (4)
  # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  detail {
  	filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  pap {
  	auto_header = no
  	normalise = yes
  }
  # Loaded module rlm_radutmp
  # Instantiating module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/usr/local/var/log/radius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
  eap {
  	default_eap_type = "md5"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	mod_accounting_username_bug = no
  	max_sessions = 4096
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
   	challenge = "Password: "
   	auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
   	tls = "tls-common"
   }
   tls-config tls-common {
   	rsa_key_exchange = no
   	dh_key_exchange = yes
   	rsa_key_length = 512
   	dh_key_length = 512
   	verify_depth = 0
   	ca_path = "/usr/local/etc/raddb/certs"
   	pem_file_type = yes
   	private_key_file = "/usr/local/etc/raddb/certs/server.pem"
   	certificate_file = "/usr/local/etc/raddb/certs/server.pem"
   	ca_file = "/usr/local/etc/raddb/certs/ca.pem"
   	private_key_password = <<< secret >>>
   	dh_file = "/usr/local/etc/raddb/certs/dh"
   	fragment_size = 1024
   	include_length = yes
   	check_crl = no
   	cipher_list = "DEFAULT"
    cache {
    	enable = yes
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "md5"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	virtual_server = "inner-tunnel"
   	include_length = yes
   	require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
   	tls = "tls-common"
   	default_method = "mschapv2"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	proxy_tunneled_request_as_eap = yes
   	virtual_server = "inner-tunnel"
   	soh = no
   	require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   	with_ntdomain_hack = no
   	send_error = no
   }
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 16384
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
  unix {
  	radwtmp = "/usr/local/var/log/radius/radwtmp"
  }
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
  	hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
  # Instantiating module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\"
  	ignore_default = no
  	ignore_null = no
  }
  # Instantiating module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
  radutmp {
  	filename = "/usr/local/var/log/radius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog {
  	filename = "/usr/local/var/log/radius/linelog"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "%{%{Packet-Type}:-format}"
  }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  }
  # Loaded module rlm_always
  # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
WARNING: Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
server default { # from file /usr/local/etc/raddb/sites-enabled/default
 # Creating Auth-Type = digest
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = 127.0.0.1
  	port = 18120
}
listen {
  	type = "auth"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 41518
Ready to process requests.
radiusd: FreeRADIUS Version 3.0.2, for host x86_64-unknown-linux-gnu, built on Jun 16 2014 at 07:36:25
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/sql
including configuration file /usr/local/etc/raddb/mods-config/sql/main/mysql/queries.conf
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/dhcp
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file /usr/local/etc/raddb/sites-enabled/default
main {
 security {
 	allow_core_dumps = no
 }
}
main {
	name = "radiusd"
	prefix = "/usr/local"
	localstatedir = "/usr/local/var"
	sbindir = "/usr/local/sbin"
	logdir = "/usr/local/var/log/radius"
	run_dir = "/usr/local/var/run/radiusd"
	libdir = "/usr/local/lib"
	radacctdir = "/usr/local/var/log/radius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 1024
	pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
	checkrad = "/usr/local/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 security {
 	max_attributes = 200
 	reject_delay = 1
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	num_answers_to_alive = 3
 	revive_interval = 120
 	status_check_timeout = 4
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_exec
  # Instantiating module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Instantiating module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
  # Loaded module rlm_files
  # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
  files {
  	filename = "/usr/local/etc/raddb/mods-config/files/authorize"
  	usersfile = "/usr/local/etc/raddb/mods-config/files/authorize"
  	acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
  	preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
  	compat = "no"
  }
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_detail
  # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail auth_log {
  	filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  	filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_sql
  # Instantiating module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
  sql {
  	driver = "rlm_sql_null"
  	server = "localhost"
  	port = ""
  	login = ""
  	password = <<< secret >>>
  	radius_db = "radius"
  	read_groups = yes
  	read_clients = yes
  	delete_stale_sessions = yes
  	sql_user_name = "%{User-Name}"
  	default_user_profile = ""
  	client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
  	authorize_check_query = "#	SELECT id, username, attribute, value, op #	FROM radcheck #	WHERE username = BINARY '%{SQL-User-Name}' #	ORDER BY id"
  	authorize_reply_query = "#	SELECT id, username, attribute, value, op #	FROM radreply #	WHERE username = BINARY '%{SQL-User-Name}' #	ORDER BY id"
  	authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id"
  	authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id"
  	group_membership_query = "#	SELECT groupname #	FROM radusergroup #	WHERE username = BINARY '%{SQL-User-Name}' #	ORDER BY priority"
  	simul_count_query = ""
  	simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
   accounting {
   	reference = "%{tolower:type.%{Acct-Status-Type}.query}"
   }
   post-auth {
   	reference = ".query"
   }
rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and linked
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
   	start = 5
   	min = 4
   	max = 32
   	spare = 3
   	uses = 0
   	lifetime = 0
   	cleanup_interval = 30
   	idle_timeout = 60
   	retry_delay = 1
   	spread = no
   }
rlm_sql (sql): Opening additional connection (0)
rlm_sql (sql): Opening additional connection (1)
rlm_sql (sql): Opening additional connection (2)
rlm_sql (sql): Opening additional connection (3)
rlm_sql (sql): Opening additional connection (4)
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Executing query: 'SELECT id, nasname, shortname, type, secret, server FROM nas'
rlm_sql (sql): Released connection (4)
  # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  detail {
  	filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	dir_permissions = 493
  	locking = no
  	log_packet_header = no
  }
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  pap {
  	auto_header = no
  	normalise = yes
  }
  # Loaded module rlm_radutmp
  # Instantiating module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/usr/local/var/log/radius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
  eap {
  	default_eap_type = "md5"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	mod_accounting_username_bug = no
  	max_sessions = 4096
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
   	challenge = "Password: "
   	auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
   	tls = "tls-common"
   }
   tls-config tls-common {
   	rsa_key_exchange = no
   	dh_key_exchange = yes
   	rsa_key_length = 512
   	dh_key_length = 512
   	verify_depth = 0
   	ca_path = "/usr/local/etc/raddb/certs"
   	pem_file_type = yes
   	private_key_file = "/usr/local/etc/raddb/certs/server.pem"
   	certificate_file = "/usr/local/etc/raddb/certs/server.pem"
   	ca_file = "/usr/local/etc/raddb/certs/ca.pem"
   	private_key_password = <<< secret >>>
   	dh_file = "/usr/local/etc/raddb/certs/dh"
   	fragment_size = 1024
   	include_length = yes
   	check_crl = no
   	cipher_list = "DEFAULT"
    cache {
    	enable = yes
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "md5"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	virtual_server = "inner-tunnel"
   	include_length = yes
   	require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
   	tls = "tls-common"
   	default_method = "mschapv2"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	proxy_tunneled_request_as_eap = yes
   	virtual_server = "inner-tunnel"
   	soh = no
   	require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   	with_ntdomain_hack = no
   	send_error = no
   }
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 16384
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
  unix {
  	radwtmp = "/usr/local/var/log/radius/radwtmp"
  }
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
  	hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
  # Instantiating module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\"
  	ignore_default = no
  	ignore_null = no
  }
  # Instantiating module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
  radutmp {
  	filename = "/usr/local/var/log/radius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog {
  	filename = "/usr/local/var/log/radius/linelog"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "%{%{Packet-Type}:-format}"
  }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  }
  # Loaded module rlm_always
  # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
WARNING: Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
server default { # from file /usr/local/etc/raddb/sites-enabled/default
 # Creating Auth-Type = digest
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = 127.0.0.1
  	port = 18120
}
listen {
  	type = "auth"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 54083
Ready to process requests.


More information about the Freeradius-Users mailing list