tunnel-private-group-id in access-accept

[Marc Boisis]

Hello,

The attribute « Tunnel-Private-Group-Id » is sent in an access  challenge packet but never in the Access-Accept response, how can I have it in the access accept ?
Thanks


Sending Access-Challenge of id 50 to 10.9.0.1 port 38933
	Tunnel-Private-Group-Id:0 = "1"
	Tunnel-Medium-Type:0 = IEEE-802
	Tunnel-Type:0 = VLAN
	Class = 0x4f553d61646d696e3b
	EAP-Message = 0x010200061920
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x066c0c42066e157cccd2b11a53caf40e



Sending Access-Accept of id 61 to 10.9.0.1 port 38933
	User-Name = "mdelavau\000"
	MS-MPPE-Recv-Key = 0xe9ac2590a2e51a4337dbabcf1a506eb3fce9d4823514315e383a85d526b4118c
	MS-MPPE-Send-Key = 0x99ecc593acf1721f395abf9d3e5b195edc16dd881842737d5cb3299fa77ca5ed
	EAP-Message = 0x030c0004
	Message-Authenticator = 0x00000000000000000000000000000000

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20141022/502b6ace/attachment.html>