Error binding to 0.0.0.0 port for port 1812

jose luis sanchez ortiz jeluchez at gmail.com
Sat Jun 20 15:01:35 CEST 2015


but the secret is not incorrect, is correct.

friends help me

2015-06-19 23:18 GMT-05:00 Danner, Mearl <jmdanner at samford.edu>:

>
>
> > -----Original Message-----
> > From: Freeradius-Users [mailto:freeradius-users-
> > bounces+jmdanner=samford.edu at lists.freeradius.org] On Behalf Of jose
> > luis sanchez ortiz
> > Sent: Friday, June 19, 2015 8:50 PM
> > To: FreeRadius users mailing list
> > Subject: Re: Error binding to 0.0.0.0 port for port 1812
> >
> > after of "killall freeradius" and radtest  "freeradius -X" show
> >
> > ... adding new socket proxy address * port 40798
> > Listening on authentication address * port 1812
> > Listening on accounting address * port 1813
> > Listening on authentication address 127.0.0.1 port 18120 as server
> > inner-tunnel
> > Listening on proxy address * port 1814
> > Ready to process requests.
> > rad_recv: Access-Request packet from host 127.0.0.1 port 55177, id=95,
> > length=78
> > Received packet from 127.0.0.1 with invalid Message-Authenticator!
> (Shared
> > secret is incorrect.) Dropping packet without response.
>
> The above response should be self-explanatory. It even repeats below.
>
> > Going to the next request
> > Waking up in 0.9 seconds.
> > Cleaning up request 0 ID 95 with timestamp +5
> > Ready to process requests.
> > rad_recv: Access-Request packet from host 127.0.0.1 port 55177, id=95,
> > length=78
> > Received packet from 127.0.0.1 with invalid Message-Authenticator!
> (Shared
> > secret is incorrect.) Dropping packet without response.
> > Going to the next request
> > Waking up in 0.9 seconds.
> > Cleaning up request 1 ID 95 with timestamp +10
> > Ready to process requests
> >
> > 2015-06-19 3:09 GMT-05:00 Stefan Paetow <Stefan.Paetow at jisc.ac.uk>:
> >
> > > > That shows FR is sending access-accept. Are you SURE this is the same
> > > > log as when you say "radclient: no response from server for ID 239
> > > > socket 3"? If yes, then there should be at least three logs of
> similar
> > > > auth request, but you pasted only one. And that would mean something
> > >
> > > I would also suggest checking that there is no firewall (iptables or
> > > similar) running, or if it is, that the RADIUS port (1812) is actually
> open.
> > >
> > > Stefan Paetow
> > > Moonshot Industry & Research Liaison Coordinator
> > >
> > > t: +44 (0)1235 822 125
> > > gpg: 0x3FCE5142
> > > xmpp: stefanp at jabber.dev.ja.net
> > > skype: stefan.paetow.janet
> > > Lumen House, Library Avenue, Harwell Oxford, Didcot, OX11 0SG
> > >
> > > jisc.ac.uk
> > >
> > > Jisc is a registered charity (number 1149740) and a company limited by
> > > guarantee which is registered in England under Company No. 5747339, VAT
> > No.
> > > GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower
> Hill,
> > > Bristol, BS2 0JA. T 0203 697 5800.
> > > Jisc Collections and Janet Ltd. is a wholly owned Jisc subsidiary and a
> > > company limited by guarantee which is registered in England under
> > Company
> > > No. number 2881024, VAT No. GB 197 0632 86. The registered office is:
> > Lumen
> > > House, Library Avenue, Harwell, Didcot, Oxfordshire, OX11 0SG. T 01235
> > > 822200.
> > >
> > >
> > > -
> > > List info/subscribe/unsubscribe? See
> > > http://www.freeradius.org/list/users.html
> > >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>


More information about the Freeradius-Users mailing list