Error binding to 0.0.0.0 port for port 1812

[Vijay S]

Hi Jose ,
Seeing the number posts you are sending here and in-spite these geeks
helping you and still you not able to resolve it yourself. I won't mind
taking your team viewer access and solve it if you ok with it. You can PM
me.

Regards
Vijay A.


On Monday, June 22, 2015, <A.L.M.Buxey at lboro.ac.uk> wrote:

> Hi,
> > debug 192.168.0.1
> > radclient: no response from server for ID 237 socket 3
> >
> > debug localhost
> > something strange happens when I run the radtest just not working. but
> when I
> > run the radtest and freeradius -xa the same time shows:
> >
> > rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=217,
> > length=20
>
>
> so...if you are running debug mode....and not seeing anything when you do
> the test from
> 192.168.0.1 but you see the localhost working, then you have a simple
> communication
> problem between the 2 systems.
>
> ensure that you have correctly configured firewalling on the box running
> freeradius -
> UDP port 1812 is open for source of 192.168.0.1
>
> or perhaps the traffic is blocked elsewhere on the network - ACLs between
> VLANs for example
>
> alan
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html