IP allocation problem
Tevfik Ceydeliler
tevfik.ceydeliler at astron.yasar.com.tr
Thu Mar 5 13:57:27 CET 2015
Can problrm is this?
on sqlippool.conf
-------------------------------
pool-key = "%{NAS-Port}"
# pool-key = "%{Calling-Station-Id}"
----------------------------------
On 03/05/2015 02:41 PM, Tevfik Ceydeliler wrote:
> here is debug log.
> There is a warning about two type atuhentication. But I think this is
> not cause of problem.
>
> I check that same calling station ID .
> But cant find why happen this:
>
> rad_recv: Access-Request packet from host 172.30.80.1 port 24288,
> id=190, length=396
> Calling-Station-Id = "905303643912"
> User-Name = "biryudumgida3"
> NAS-IP-Address = 172.30.80.1
> NAS-Identifier = "MTCGGSNK3"
> Service-Type = Framed-User
> Framed-Protocol = GPRS-PDP-Context
> NAS-Port-Type = Wireless-Other
> ---3GPP things--
> Called-Station-Id = "yasarapn"
> ---3GPP things--
> CHAP-Challenge = 0xa326bfbfa326bfbfa326bfbfa326bfbf
> CHAP-Password = 0x004de14711758f194ae8bbc0b2cd18899e
> NAS-Port = 98076
> 3GPP-Charging-Gateway-Address = 10.200.211.27
> # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> +- entering group authorize {...}
> ++[preprocess] returns ok
> [chap] Setting 'Auth-Type := CHAP'
> ++[chap] returns ok
> ++[mschap] returns noop
> ++[digest] returns noop
> [suffix] No '@' in User-Name = "biryudumgida3", looking up realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] returns noop
> [eap] No EAP-Message, not doing EAP
> ++[eap] returns noop
> ++[files] returns noop
> [sql] expand: %{User-Name} -> biryudumgida3
> [sql] sql_set_user escaped user --> 'biryudumgida3'
> rlm_sql (sql): Reserving sql socket id: 0
> [sql] expand: SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = '%{SQL-User-Name}'
> ORDER BY id -> SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = 'biryudumgida3' ORDER BY id
> [sql] User found in radcheck table
> [sql] expand: SELECT id, username, attribute, value, op
> FROM radreply WHERE username = '%{SQL-User-Name}'
> ORDER BY id -> SELECT id, username, attribute, value, op
> FROM radreply WHERE username = 'biryudumgida3' ORDER BY id
> [sql] expand: SELECT groupname FROM
> radusergroup WHERE username = '%{SQL-User-Name}'
> ORDER BY priority -> SELECT groupname FROM
> radusergroup WHERE username = 'biryudumgida3'
> ORDER BY priority
> [sql] expand: SELECT id, groupname, attribute, Value, op
> FROM radgroupcheck WHERE groupname =
> '%{Sql-Group}' ORDER BY id -> SELECT id, groupname,
> attribute, Value, op FROM radgroupcheck
> WHERE groupname = 'UGR_TcellOtonomYBB-Secovid' ORDER BY id
> [sql] User found in group UGR_TcellOtonomYBB-Secovid
> [sql] expand: SELECT id, groupname, attribute, value, op
> FROM radgroupreply WHERE groupname =
> '%{Sql-Group}' ORDER BY id -> SELECT id, groupname,
> attribute, value, op FROM radgroupreply
> WHERE groupname = 'UGR_TcellOtonomYBB-Secovid' ORDER BY id
> rlm_sql (sql): Released sql socket id: 0
> ++[sql] returns ok
> ++[expiration] returns noop
> ++[logintime] returns noop
> ++[pap] returns noop
> WARNING: Empty pre-proxy section. Using default return values.
> Sending Access-Request of id 234 to 10.1.1.51 port 1812
> Calling-Station-Id = "905303643912"
> User-Name = "biryudumgida3"
> NAS-IP-Address = 172.30.80.1
> NAS-Identifier = "MTCGGSNK3"
> Service-Type = Framed-User
> Framed-Protocol = GPRS-PDP-Context
> NAS-Port-Type = Wireless-Other
> ---3GPP things--
> Called-Station-Id = "yasarapn"
> ---3GPP things--
> CHAP-Challenge = 0xa326bfbfa326bfbfa326bfbfa326bfbf
> CHAP-Password = 0x004de14711758f194ae8bbc0b2cd18899e
> NAS-Port = 98076
> 3GPP-Charging-Gateway-Address = 10.200.211.27
> Proxy-State = 0x313930
> Proxying request 4 to home server 10.1.1.51 port 1812
> Sending Access-Request of id 234 to 10.1.1.51 port 1812
> Calling-Station-Id = "905303643912"
> User-Name = "biryudumgida3"
> NAS-IP-Address = 172.30.80.1
> NAS-Identifier = "MTCGGSNK3"
> Service-Type = Framed-User
> Framed-Protocol = GPRS-PDP-Context
> NAS-Port-Type = Wireless-Other
> ---3GPP things--
> Called-Station-Id = "yasarapn"
> ---3GPP things--
> CHAP-Challenge = 0xa326bfbfa326bfbfa326bfbfa326bfbf
> CHAP-Password = 0x004de14711758f194ae8bbc0b2cd18899e
> NAS-Port = 98076
> 3GPP-Charging-Gateway-Address = 10.200.211.27
> Proxy-State = 0x313930
> Going to the next request
> Waking up in 0.9 seconds.
> rad_recv: Access-Accept packet from host 10.1.1.51 port 1812, id=234,
> length=25
> Proxy-State = 0x313930
> # Executing section post-proxy from file
> /etc/freeradius/sites-enabled/default
> +- entering group post-proxy {...}
> [eap] No pre-existing handler found
> ++[eap] returns noop
> Found Auth-Type = CHAP
> Found Auth-Type = Accept
> ###THERE IS A WARNING HERE!! ####
> Warning: Found 2 auth-types on request for user 'biryudumgida3'
> Auth-Type = Accept, accepting the user
> # Executing section post-auth from file
> /etc/freeradius/sites-enabled/default
> +- entering group post-auth {...}
> rlm_sql (sql): Reserving sql socket id: 4
> [sqlippool] expand: %{User-Name} -> biryudumgida3
> [sqlippool] sql_set_user escaped user --> 'biryudumgida3'
> [sqlippool] expand: START TRANSACTION -> START TRANSACTION
> [sqlippool] expand: UPDATE radippool SET nasipaddress = '',
> pool_key = 0, callingstationid = '', username = '', expiry_time =
> NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND AND
> nasipaddress = '%{Nas-IP-Address}' -> UPDATE radippool SET
> nasipaddress = '', pool_key = 0, callingstationid = '', username =
> '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1
> SECOND AND nasipaddress = '172.30.80.1'
> [sqlippool] expand: SELECT framedipaddress FROM radippool WHERE
> pool_name = '%{control:Pool-Name}' AND (expiry_time < NOW() OR
> expiry_time IS NULL) ORDER BY (username <> '%{User-Name}'),
> (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1
> FOR UPDATE -> SELECT framedipaddress FROM radippool WHERE pool_name =
> 'IP_TcellOtonomYBB' AND (expiry_time < NOW() OR expiry_time IS NULL)
> ORDER BY (username <> 'biryudumgida3'), (callingstationid <>
> '905303643912'), expiry_time LIMIT 1 FOR UPDATE
> [sqlippool] expand: UPDATE radippool SET nasipaddress =
> '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid =
> '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time =
> NOW() + INTERVAL 7200 SECOND WHERE framedipaddress = '172.30.64.191'
> AND expiry_time IS NULL -> UPDATE radippool SET nasipaddress =
> '172.30.80.1', pool_key = '98076', callingstationid = '905303643912',
> username = 'biryudumgida3', expiry_time = NOW() + INTERVAL 7200
> SECOND WHERE framedipaddress = '172.30.64.191' AND expiry_time IS NULL
> [sqlippool] Allocated IP 172.30.64.191 [bf401eac]
> [sqlippool] expand: COMMIT -> COMMIT
> rlm_sql (sql): Released sql socket id: 4
> [sqlippool] expand: Allocated IP: %{reply:Framed-IP-Address} from
> %{control:Pool-Name} (did %{Called-Station-Id} cli
> %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) -> Allocated
> IP: 172.30.64.191 from IP_TcellOtonomYBB (did yasarapn cli
> 905303643912 port 98076 user biryudumgida3)
> #####IP ALLOCATED AS 172.30.64.191 #######
> Allocated IP: 172.30.64.191 from IP_TcellOtonomYBB (did yasarapn cli
> 905303643912 port 98076 user biryudumgida3)
> ++[sqlippool] returns ok
> ++[exec] returns noop
> Sending Access-Accept of id 190 to 172.30.80.1 port 24288
> Framed-IP-Address = 172.30.64.191
> Finished request 4.
> Going to the next request
> Waking up in 4.9 seconds.
> Cleaning up request 4 ID 190 with timestamp +875
> Ready to process requests.
> #####REQ. COMES AGAIN ######
> rad_recv: Access-Request packet from host 172.30.80.1 port 24480,
> id=83, length=396
> Calling-Station-Id = "905303643912"
> User-Name = "biryudumgida3"
> NAS-IP-Address = 172.30.80.1
> NAS-Identifier = "MTCGGSNK3"
> Service-Type = Framed-User
> Framed-Protocol = GPRS-PDP-Context
> NAS-Port-Type = Wireless-Other
> ---3GPP things--
> Called-Station-Id = "yasarapn"
> ---3GPP things--
> CHAP-Challenge = 0x2d9abfbf2d9abfbf2d9abfbf2d9abfbf
> CHAP-Password = 0x00ec83996af9236f1afe60dacc246bc3c4
> NAS-Port = 128247
> 3GPP-Charging-Gateway-Address = 10.200.211.27
> # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> +- entering group authorize {...}
> ++[preprocess] returns ok
> [chap] Setting 'Auth-Type := CHAP'
> ++[chap] returns ok
> ++[mschap] returns noop
> ++[digest] returns noop
> [suffix] No '@' in User-Name = "biryudumgida3", looking up realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] returns noop
> [eap] No EAP-Message, not doing EAP
> ++[eap] returns noop
> ++[files] returns noop
> [sql] expand: %{User-Name} -> biryudumgida3
> [sql] sql_set_user escaped user --> 'biryudumgida3'
> rlm_sql (sql): Reserving sql socket id: 3
> [sql] expand: SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = '%{SQL-User-Name}'
> ORDER BY id -> SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = 'biryudumgida3' ORDER BY id
> [sql] User found in radcheck table
> [sql] expand: SELECT id, username, attribute, value, op
> FROM radreply WHERE username = '%{SQL-User-Name}'
> ORDER BY id -> SELECT id, username, attribute, value, op
> FROM radreply WHERE username = 'biryudumgida3' ORDER BY id
> [sql] expand: SELECT groupname FROM
> radusergroup WHERE username = '%{SQL-User-Name}'
> ORDER BY priority -> SELECT groupname FROM
> radusergroup WHERE username = 'biryudumgida3'
> ORDER BY priority
> [sql] expand: SELECT id, groupname, attribute, Value, op
> FROM radgroupcheck WHERE groupname =
> '%{Sql-Group}' ORDER BY id -> SELECT id, groupname,
> attribute, Value, op FROM radgroupcheck
> WHERE groupname = 'UGR_TcellOtonomYBB-Secovid' ORDER BY id
> [sql] User found in group UGR_TcellOtonomYBB-Secovid
> [sql] expand: SELECT id, groupname, attribute, value, op
> FROM radgroupreply WHERE groupname =
> '%{Sql-Group}' ORDER BY id -> SELECT id, groupname,
> attribute, value, op FROM radgroupreply
> WHERE groupname = 'UGR_TcellOtonomYBB-Secovid' ORDER BY id
> rlm_sql (sql): Released sql socket id: 3
> ++[sql] returns ok
> ++[expiration] returns noop
> ++[logintime] returns noop
> ++[pap] returns noop
> WARNING: Empty pre-proxy section. Using default return values.
> Sending Access-Request of id 132 to 10.1.1.51 port 1812
> Calling-Station-Id = "905303643912"
> User-Name = "biryudumgida3"
> NAS-IP-Address = 172.30.80.1
> NAS-Identifier = "MTCGGSNK3"
> Service-Type = Framed-User
> Framed-Protocol = GPRS-PDP-Context
> NAS-Port-Type = Wireless-Other
> ---3GPP things--
> Called-Station-Id = "yasarapn"
> ---3GPP things--
> CHAP-Challenge = 0x2d9abfbf2d9abfbf2d9abfbf2d9abfbf
> CHAP-Password = 0x00ec83996af9236f1afe60dacc246bc3c4
> NAS-Port = 128247
> 3GPP-Charging-Gateway-Address = 10.200.211.27
> Proxy-State = 0x3833
> Proxying request 5 to home server 10.1.1.51 port 1812
> Sending Access-Request of id 132 to 10.1.1.51 port 1812
> Calling-Station-Id = "905303643912"
> User-Name = "biryudumgida3"
> NAS-IP-Address = 172.30.80.1
> NAS-Identifier = "MTCGGSNK3"
> Service-Type = Framed-User
> Framed-Protocol = GPRS-PDP-Context
> NAS-Port-Type = Wireless-Other
> ---3GPP things--
> Called-Station-Id = "yasarapn"
> ---3GPP things--
> CHAP-Challenge = 0x2d9abfbf2d9abfbf2d9abfbf2d9abfbf
> CHAP-Password = 0x00ec83996af9236f1afe60dacc246bc3c4
> NAS-Port = 128247
> 3GPP-Charging-Gateway-Address = 10.200.211.27
> Proxy-State = 0x3833
> Going to the next request
> Waking up in 0.9 seconds.
> rad_recv: Access-Reject packet from host 10.1.1.51 port 1812, id=132,
> length=24
> Proxy-State = 0x3833
> # Executing section post-proxy from file
> /etc/freeradius/sites-enabled/default
> +- entering group post-proxy {...}
> [eap] No pre-existing handler found
> ++[eap] returns noop
> Using Post-Auth-Type Reject
> # Executing group from file /etc/freeradius/sites-enabled/default
> +- entering group REJECT {...}
> [attr_filter.access_reject] expand: %{User-Name} -> biryudumgida3
> attr_filter: Matched entry DEFAULT at line 11
> ++[attr_filter.access_reject] returns updated
> Delaying reject of request 5 for 1 seconds
> Going to the next request
> Waking up in 0.9 seconds.
> Sending delayed reject for request 5
> #####ACCESS_REJECT SEND#######
> Sending Access-Reject of id 83 to 172.30.80.1 port 24480
> Waking up in 4.9 seconds.
> Cleaning up request 5 ID 83 with timestamp +905
> Ready to process requests.
> ######## REQ. COMES AGAIN ######
> rad_recv: Access-Request packet from host 172.30.80.1 port 24304,
> id=169, length=396
> Calling-Station-Id = "905303643912"
> User-Name = "biryudumgida3"
> NAS-IP-Address = 172.30.80.1
> NAS-Identifier = "MTCGGSNK3"
> Service-Type = Framed-User
> Framed-Protocol = GPRS-PDP-Context
> NAS-Port-Type = Wireless-Other
> ---3GPP things--
> Called-Station-Id = "yasarapn"
> ---3GPP things--
> CHAP-Challenge = 0x3f10c0c03f10c0c03f10c0c03f10c0c0
> CHAP-Password = 0x00b66d4ff74c3480f2c1542a25e80a2339
> NAS-Port = 85715
> 3GPP-Charging-Gateway-Address = 10.200.211.27
> # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> +- entering group authorize {...}
> ++[preprocess] returns ok
> [chap] Setting 'Auth-Type := CHAP'
> ++[chap] returns ok
> ++[mschap] returns noop
> ++[digest] returns noop
> [suffix] No '@' in User-Name = "biryudumgida3", looking up realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] returns noop
> [eap] No EAP-Message, not doing EAP
> ++[eap] returns noop
> ++[files] returns noop
> [sql] expand: %{User-Name} -> biryudumgida3
> [sql] sql_set_user escaped user --> 'biryudumgida3'
> rlm_sql (sql): Reserving sql socket id: 2
> [sql] expand: SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = '%{SQL-User-Name}'
> ORDER BY id -> SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = 'biryudumgida3' ORDER BY id
> [sql] User found in radcheck table
> [sql] expand: SELECT id, username, attribute, value, op
> FROM radreply WHERE username = '%{SQL-User-Name}'
> ORDER BY id -> SELECT id, username, attribute, value, op
> FROM radreply WHERE username = 'biryudumgida3' ORDER BY id
> [sql] expand: SELECT groupname FROM
> radusergroup WHERE username = '%{SQL-User-Name}'
> ORDER BY priority -> SELECT groupname FROM
> radusergroup WHERE username = 'biryudumgida3'
> ORDER BY priority
> [sql] expand: SELECT id, groupname, attribute, Value, op
> FROM radgroupcheck WHERE groupname =
> '%{Sql-Group}' ORDER BY id -> SELECT id, groupname,
> attribute, Value, op FROM radgroupcheck
> WHERE groupname = 'UGR_TcellOtonomYBB-Secovid' ORDER BY id
> [sql] User found in group UGR_TcellOtonomYBB-Secovid
> [sql] expand: SELECT id, groupname, attribute, value, op
> FROM radgroupreply WHERE groupname =
> '%{Sql-Group}' ORDER BY id -> SELECT id, groupname,
> attribute, value, op FROM radgroupreply
> WHERE groupname = 'UGR_TcellOtonomYBB-Secovid' ORDER BY id
> rlm_sql (sql): Released sql socket id: 2
> ++[sql] returns ok
> ++[expiration] returns noop
> ++[logintime] returns noop
> ++[pap] returns noop
> WARNING: Empty pre-proxy section. Using default return values.
> Sending Access-Request of id 115 to 10.1.1.51 port 1812
> Calling-Station-Id = "905303643912"
> User-Name = "biryudumgida3"
> NAS-IP-Address = 172.30.80.1
> NAS-Identifier = "MTCGGSNK3"
> Service-Type = Framed-User
> Framed-Protocol = GPRS-PDP-Context
> NAS-Port-Type = Wireless-Other
> ---3GPP things--
> Called-Station-Id = "yasarapn"
> ---3GPP things--
> CHAP-Challenge = 0x3f10c0c03f10c0c03f10c0c03f10c0c0
> CHAP-Password = 0x00b66d4ff74c3480f2c1542a25e80a2339
> NAS-Port = 85715
> 3GPP-Charging-Gateway-Address = 10.200.211.27
> Proxy-State = 0x313639
> Proxying request 6 to home server 10.1.1.51 port 1812
> Sending Access-Request of id 115 to 10.1.1.51 port 1812
> Calling-Station-Id = "905303643912"
> User-Name = "biryudumgida3"
> NAS-IP-Address = 172.30.80.1
> NAS-Identifier = "MTCGGSNK3"
> Service-Type = Framed-User
> Framed-Protocol = GPRS-PDP-Context
> NAS-Port-Type = Wireless-Other
> ---3GPP things--
> Called-Station-Id = "yasarapn"
> ---3GPP things--
> CHAP-Challenge = 0x3f10c0c03f10c0c03f10c0c03f10c0c0
> CHAP-Password = 0x00b66d4ff74c3480f2c1542a25e80a2339
> NAS-Port = 85715
> 3GPP-Charging-Gateway-Address = 10.200.211.27
> Proxy-State = 0x313639
> Going to the next request
> Waking up in 0.9 seconds.
> rad_recv: Access-Accept packet from host 10.1.1.51 port 1812, id=115,
> length=25
> Proxy-State = 0x313639
> # Executing section post-proxy from file
> /etc/freeradius/sites-enabled/default
> +- entering group post-proxy {...}
> [eap] No pre-existing handler found
> ++[eap] returns noop
> Found Auth-Type = CHAP
> Found Auth-Type = Accept
> ######## THERE IS A WARNING HERE ##############
> Warning: Found 2 auth-types on request for user 'biryudumgida3'
> Auth-Type = Accept, accepting the user
> # Executing section post-auth from file
> /etc/freeradius/sites-enabled/default
> +- entering group post-auth {...}
> rlm_sql (sql): Reserving sql socket id: 1
> [sqlippool] expand: %{User-Name} -> biryudumgida3
> [sqlippool] sql_set_user escaped user --> 'biryudumgida3'
> [sqlippool] expand: START TRANSACTION -> START TRANSACTION
> [sqlippool] expand: UPDATE radippool SET nasipaddress = '',
> pool_key = 0, callingstationid = '', username = '', expiry_time =
> NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND AND
> nasipaddress = '%{Nas-IP-Address}' -> UPDATE radippool SET
> nasipaddress = '', pool_key = 0, callingstationid = '', username =
> '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1
> SECOND AND nasipaddress = '172.30.80.1'
> [sqlippool] expand: SELECT framedipaddress FROM radippool WHERE
> pool_name = '%{control:Pool-Name}' AND (expiry_time < NOW() OR
> expiry_time IS NULL) ORDER BY (username <> '%{User-Name}'),
> (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1
> FOR UPDATE -> SELECT framedipaddress FROM radippool WHERE pool_name =
> 'IP_TcellOtonomYBB' AND (expiry_time < NOW() OR expiry_time IS NULL)
> ORDER BY (username <> 'biryudumgida3'), (callingstationid <>
> '905303643912'), expiry_time LIMIT 1 FOR UPDATE
> [sqlippool] expand: UPDATE radippool SET nasipaddress =
> '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid =
> '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time =
> NOW() + INTERVAL 7200 SECOND WHERE framedipaddress = '172.30.64.190'
> AND expiry_time IS NULL -> UPDATE radippool SET nasipaddress =
> '172.30.80.1', pool_key = '85715', callingstationid = '905303643912',
> username = 'biryudumgida3', expiry_time = NOW() + INTERVAL 7200
> SECOND WHERE framedipaddress = '172.30.64.190' AND expiry_time IS NULL
> [sqlippool] Allocated IP 172.30.64.190 [be401eac]
> [sqlippool] expand: COMMIT -> COMMIT
> rlm_sql (sql): Released sql socket id: 1
> [sqlippool] expand: Allocated IP: %{reply:Framed-IP-Address} from
> %{control:Pool-Name} (did %{Called-Station-Id} cli
> %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) -> Allocated
> IP: 172.30.64.190 from IP_TcellOtonomYBB (did yasarapn cli
> 905303643912 port 85715 user biryudumgida3)
> ########## NOW ALLOCATE DIFFERENT IP TO SAME USER EVEN RELEASE TIME
> 7200 SEC #######
> Allocated IP: 172.30.64.190 from IP_TcellOtonomYBB (did yasarapn cli
> 905303643912 port 85715 user biryudumgida3)
> ++[sqlippool] returns ok
> ++[exec] returns noop
> Sending Access-Accept of id 169 to 172.30.80.1 port 24304
> Framed-IP-Address = 172.30.64.190
> Finished request 6.
> Going to the next request
> Waking up in 4.9 seconds.
> Cleaning up request 6 ID 169 with timestamp +935
> Ready to process requests.
>
> On 03/03/2015 02:43 PM, Alan DeKok wrote:
>> On Mar 3, 2015, at 3:47 AM, Tevfik Ceydeliler<tevfik.ceydeliler at astron.yasar.com.tr> wrote:
>>> Altough I use sqlippool adn lease time 6 hours, why one user get more than one IP?
>> No idea.
>>
>>> Any idea? or suggestion where I look?
>> How about the debug output? Which tells you when / why the user was assigned an IP address?
>>
>> I’ll note that the default configuration hands out IP addresses based on Calling-Station-Id. And re-uses the same IP if the user logs in again with the same Calling-Station-Id. So… the problem doesn’t seem to be the default configuration.
>>
>> Alan DeKok.
>>
>>
>>
>> -
>> List info/subscribe/unsubscribe? Seehttp://www.freeradius.org/list/users.html
>
> --
--
More information about the Freeradius-Users
mailing list