Tweaking LDAP parameters
David Hartburn
D.J.Hartburn at kent.ac.uk
Wed Apr 13 16:41:05 CEST 2016
Any tips on narrowing down this error in the debugging logs?
I have run a number of -X sessions, the biggest being 20 minutes
generating 517Mb of logs. The error does not appear in debugging mode,
grepping for spawn.
Even just looking for 'Error' and 'ldap' in the same line returns zero hits.
On restarting the server in normal mode, I instantly see the error
appearing with regular frequency - around 5 times per minute.
The closest I can find is complaining about needing more spares in this
section here:
rlm_ldap (ldap): Deleting connection (6)
rlm_ldap (ldap): 0 of 6 connections in use. Need more spares
rlm_ldap (ldap): Opening additional connection (18)
rlm_ldap (ldap): Connecting to aaaaa.ad.kent.ac.uk bbbbb.ad.kent.ac.uk
cccc.ad.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(96) [ldap] = ok
(96) } # authorize = updated
(96) Found Auth-Type = EAP
(96) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(96) authenticate {
(96) eap : Expiring EAP session with state 0xbb13282fbb1131a0
(96) eap : Finished EAP session with state 0x05a9503c04a34a83
(96) eap : Previous EAP request found for state 0x05a9503c04a34a83,
released from the list
(96) eap : Peer sent method MSCHAPv2 (26)
The config information is as follows:
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu,
built on Dec 28 2014 at 07:00:16
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/roaming_proxy.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/roaming_clients.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/ldap
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/eduroam-eap
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/sql
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/kent-local
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/dhcp
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/control-socket
including configuration file /etc/raddb/sites-enabled/eduroam-inner-tunnel
including configuration file /etc/raddb/sites-enabled/kent-eduroam
including configuration file /etc/raddb/sites-enabled/eduroam
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/check-eap-tls
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 4096
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
}
home_server eduroam0 {
ipaddr = roaming0.ja.net IPv4 address [194.82.174.185]
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 30.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 300
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
}
home_server eduroam1 {
ipaddr = roaming1.ja.net IPv4 address [194.83.56.233]
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 30.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 300
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
}
home_server eduroam2 {
ipaddr = roaming2.ja.net IPv4 address [194.83.56.249]
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 30.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 300
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
home_server_pool eduroam {
type = client-port-balance
home_server = eduroam0
home_server = eduroam1
home_server = eduroam2
}
realm eduroam {
auth_pool = eduroam
nostrip
}
realm kent.ac.uk {
}
realm test.kent.ac.uk {
}
radiusd: #### Loading Clients ####
client roaming0.ja.net {
ipaddr = roaming0.ja.net IPv4 address [194.82.174.185]
require_message_authenticator = no
secret = <<< secret >>>
shortname = "roaming0.ja.net"
nas_type = "other"
virtual_server = "eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client roaming1.ja.net {
ipaddr = roaming1.ja.net IPv4 address [194.83.56.233]
require_message_authenticator = no
secret = <<< secret >>>
shortname = "roaming1.ja.net"
nas_type = "other"
virtual_server = "eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client roaming2.ja.net {
ipaddr = roaming2.ja.net IPv4 address [194.83.56.249]
require_message_authenticator = no
secret = <<< secret >>>
shortname = "roaming2.ja.net"
nas_type = "other"
virtual_server = "eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
virtual_server = "kent-eduroam"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client cwlc-cer {
ipaddr = 129.12.6.216
require_message_authenticator = no
secret = <<< secret >>>
virtual_server = "kent-eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client cwlc-tlb {
ipaddr = 129.12.6.197
require_message_authenticator = no
secret = <<< secret >>>
virtual_server = "kent-eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client sentry {
ipaddr = 129.12.21.130
require_message_authenticator = no
secret = <<< secret >>>
virtual_server = "kent-eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client swdjh {
ipaddr = 129.12.87.52
require_message_authenticator = no
secret = <<< secret >>>
virtual_server = "kent-dot1x"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
radiusd: #### Instantiating modules ####
instantiate {
}
modules {
# Loaded module rlm_attr_filter
# Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Loaded module rlm_digest
# Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_ldap
# Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
ldap {
server = "bbbbb.kent.ac.uk aaaaa.kent.ac.uk ccccc.kent.ac.uk"
port = 636
password = <<< secret >>>
identity = "cn=freerad,cn=Users,dc=ad,dc=kent,dc=ac,dc=uk"
user {
filter =
"(&(&(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})(memberof:1.2.840.113556.1.4.1941:=CN=eduroam
permitted onsite,OU=Wireless Access,OU=Computing Service Maintained
Groups,DC=ad,DC=kent,DC=ac,DC=uk))(!(memberof:1.2.840.113556.1.4.1941:=CN=Wifi
Blocked Users,OU=Wireless Access,OU=Computing Service Maintained
Groups,DC=ad,DC=kent,DC=ac,DC=uk)))"
scope = "sub"
base_dn = "DC=ad,DC=kent,DC=ac,DC=uk"
access_positive = yes
}
group {
filter = "(objectClass=group)"
scope = "sub"
base_dn = "DC=ad,DC=kent,DC=ac,DC=uk"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
}
client {
filter = "(objectClass=frClient)"
scope = "sub"
base_dn = "DC=ad,DC=kent,DC=ac,DC=uk"
attribute {
identifier = "radiusClientIdentifier"
shortname = "cn"
secret = "radiusClientSecret"
}
}
profile {
filter = "(&)"
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 20
srv_timelimit = 20
idle = 60
probes = 3
interval = 3
}
tls {
ca_file = "/etc/raddb/certs/UniversityOfKentRootCA.crt"
start_tls = no
require_cert = "allow"
}
}
rlm_ldap: Falling back to build time libldap version info. Query for
LDAP_OPT_API_INFO returned: -1
rlm_ldap: libldap vendor: OpenLDAP version: 20439
rlm_ldap (ldap): Couldn't find configuration for accounting, will return
NOOP for calls from this section
post-auth {
reference = "."
}
rlm_ldap (ldap): Initialising connection pool
pool {
start = 16
min = 8
max = 64
spare = 64
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 0
retry_delay = 1
spread = no
}
rlm_ldap (ldap): Opening additional connection (0)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (5)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (6)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (7)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (8)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (9)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (10)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (11)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (12)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (13)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (14)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (15)
rlm_ldap (ldap): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "eduroam" from file /etc/raddb/mods-enabled/ldap
ldap eduroam {
server = "bbbbb.kent.ac.uk aaaaa.kent.ac.uk ccccc.kent.ac.uk"
port = 636
password = <<< secret >>>
identity = "cn=freerad,cn=Users,dc=ad,dc=kent,dc=ac,dc=uk"
user {
filter =
"(&(&(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})(memberof:1.2.840.113556.1.4.1941:=CN=eduroam
permitted roaming,OU=Wireless Access,OU=Computing Service Maintained
Groups,DC=ad,DC=kent,DC=ac,DC=uk))(!(memberof:1.2.840.113556.1.4.1941:=CN=Wifi
Blocked Users,OU=Wireless Access,OU=Computing Service Maintained
Groups,DC=ad,DC=kent,DC=ac,DC=uk)))"
scope = "sub"
base_dn = "DC=ad,DC=kent,DC=ac,DC=uk"
access_positive = yes
}
group {
filter = "(objectClass=group)"
scope = "sub"
base_dn = "DC=ad,DC=kent,DC=ac,DC=uk"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
}
client {
filter = "(objectClass=frClient)"
scope = "sub"
base_dn = "DC=ad,DC=kent,DC=ac,DC=uk"
attribute {
identifier = "radiusClientIdentifier"
shortname = "cn"
secret = "radiusClientSecret"
}
}
profile {
filter = "(&)"
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 20
srv_timelimit = 20
idle = 60
probes = 3
interval = 3
}
tls {
ca_file = "/etc/raddb/certs/UniversityOfKentRootCA.crt"
start_tls = no
require_cert = "allow"
}
}
rlm_ldap (eduroam): Couldn't find configuration for accounting, will
return NOOP for calls from this section
post-auth {
reference = "."
}
rlm_ldap (eduroam): Initialising connection pool
pool {
start = 16
min = 8
max = 64
spare = 8
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 0
retry_delay = 1
spread = no
}
rlm_ldap (eduroam): Opening additional connection (0)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (1)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (2)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (3)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (4)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (5)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (6)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (7)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (8)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (9)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (10)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (11)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (12)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (13)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (14)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
rlm_ldap (eduroam): Opening additional connection (15)
rlm_ldap (eduroam): Connecting to bbbbb.kent.ac.uk aaaaa.kent.ac.uk
ccccc.kent.ac.uk:636
rlm_ldap (eduroam): Waiting for bind result...
rlm_ldap (eduroam): Bind successful
# Loaded module rlm_unpack
# Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_expiration
# Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
# Loaded module rlm_unix
# Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
# Loaded module rlm_linelog
# Instantiating module "linelog" from file
/etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{Packet-Type}:-default}"
}
# Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_exec
# Instantiating module "ntlm_auth" from file
/etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_passwd
# Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Loaded module rlm_detail
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Loaded module rlm_files
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
usersfile = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
compat = "cistron"
}
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
[/etc/raddb/mods-config/files/pre-proxy]:33 Cistron compatibility checks
for entry DEFAULT ...
# Loaded module rlm_dynamic_clients
# Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
mod_accounting_username_bug = no
max_sessions = 4096
}
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "loanlaptops"
virtual_server = "check-eap-tls"
}
tls-config loanlaptops {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/loan_laptop_radius2ad.pem"
certificate_file = "/etc/raddb/certs/loan_laptop_radius2ad.pem"
ca_file = "/etc/raddb/certs/unikentrootCAchain.pem"
dh_file = "/etc/raddb/certs/dh"
random_file = "/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://ocsp.kent.ac.uk/ocsp"
use_nonce = yes
timeout = 0
softfail = yes
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = yes
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls-config tls-common {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/pki/tls/private/radius2.ad.kent.ac.uk.key"
certificate_file = "/etc/pki/tls/certs/radius2.ad.kent.ac.uk.pem"
ca_file = "/etc/pki/tls/certs/globalsign.pem"
dh_file = "/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = yes
}
}
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_method = "mschapv2"
copy_request_to_tunnel = yes
use_tunneled_reply = yes
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = yes
}
# Loaded module rlm_mschap
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = yes
require_strong = yes
with_ntdomain_hack = yes
ntlm_auth = "/bin/ntlm_auth --request-nt-key
--username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}}
--challenge=%{%{mschap:Challenge}:-00}
--nt-response=%{%{mschap:NT-Response}:-00}"
passchange {
}
allow_retry = yes
retry_msg = "Re-enter (or reset) the password"
}
# Loaded module rlm_chap
# Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_radutmp
# Instantiating module "radutmp" from file
/etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_expr
# Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
# Loaded module rlm_pap
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
log_packet_header = no
}
# Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_preprocess
# Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Loaded module rlm_utf8
# Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
# Loaded module rlm_logintime
# Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_cache
# Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
cache cache_eap {
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 16384
epoch = 0
add_stats = no
}
# Loaded module rlm_soh
# Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Instantiating module "eduroam-eap" from file
/etc/raddb/mods-enabled/eduroam-eap
eap eduroam-eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
mod_accounting_username_bug = no
max_sessions = 4096
}
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/pki/tls/private/radius2.ad.kent.ac.uk.key"
certificate_file = "/etc/pki/tls/certs/radius2.ad.kent.ac.uk.pem"
ca_file = "/etc/pki/tls/certs/globalsign.pem"
dh_file = "/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = yes
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "eduroam-inner-tunnel"
include_length = yes
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_method = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "eduroam-inner-tunnel"
soh = no
require_client_cert = no
}
Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = yes
}
# Instantiating module "sradutmp" from file
/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_always
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Instantiating module "userlock" from file
/etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Instantiating module "notfound" from file
/etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_realm
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Instantiating module "replicate" from file
/etc/raddb/mods-enabled/replicate
# Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_dhcp
# Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
# Loaded module rlm_sql
# Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "mallard.kent.ac.uk"
port = "3306"
login = "freeradius"
password = <<< secret >>>
radius_db = "freeradius"
read_groups = yes
read_profiles = yes
read_clients = no
delete_stale_sessions = yes
sql_user_name = ""
default_user_profile = ""
client_query = "SELECT id,nasname,shortname,type,secret FROM nas"
authorize_check_query = ""
authorize_group_check_query = ""
authorize_group_reply_query = ""
simul_count_query = ""
simul_verify_query = ""
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sql (sql): Couldn't find configuration for accounting, will return
NOOP for calls from this section
rlm_sql (sql): Couldn't find configuration for post-auth, will return
NOOP for calls from this section
mysql {
tls {
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to database "freeradius"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 4
max = 64
spare = 3
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 1
spread = no
}
rlm_sql (sql): Opening additional connection (0)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (1)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (2)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (3)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (4)
rlm_sql_mysql: Starting connect to MySQL server
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
# Creating Auth-Type = digest
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server eduroam-inner-tunnel { # from file
/etc/raddb/sites-enabled/eduroam-inner-tunnel
# Creating Auth-Type = eduroam-eap
# Loading authenticate {...}
# Loading authorize {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server eduroam-inner-tunnel
server kent-eduroam { # from file /etc/raddb/sites-enabled/kent-eduroam
# Creating Autz-Type = Status-Server
# Creating Acct-Type = Status-Server
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading pre-proxy {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server kent-eduroam
server eduroam { # from file /etc/raddb/sites-enabled/eduroam
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading pre-proxy {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server eduroam
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
server check-eap-tls { # from file /etc/raddb/sites-enabled/check-eap-tls
# Loading authorize {...}
} # server check-eap-tls
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
uid = "radiusd"
gid = "radiusd"
mode = "rw"
}
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18121
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on command file /var/run/radiusd/radiusd.sock
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address :: port 1812 as server default
Listening on acct address :: port 1813 as server default
Listening on auth address 127.0.0.1 port 18121 as server
eduroam-inner-tunnel
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 50659
Ready to process requests
On 13/04/16 14:39, David Hartburn wrote:
> Hi,
>
> Thanks for this response. The problem appears to be load related, so
> this will have to be done on the full production. It has never appeared
> on either our test/dev box or handling just our roaming users. It has
> been sending campus traffic that has generated the problem. It is not
> restricted to one client.
>
> It seems to report every few minutes, so I will try doing a -X for a 5
> minute spell and see if the error is captured. I will post back what I
> find.
>
> Dave
>
>
> On 13/04/16 14:29, Matthew Newton wrote:
>> On Wed, Apr 13, 2016 at 02:10:14PM +0100, David Hartburn wrote:
>>> Sorry to waste time, but do you mean the full log from doing a
>>> 'radius -X'?
>>
>> That's what contains the required information.
>>
>>> I want to clarify because on a production server that will be a huge
>>> log. I
>>> am happy to produce it though.
>>
>> Depending on the problem, you can sometimes be more specific about
>> what you log by using radmin. First run radiusd -X and capture the
>> output to the end of the startup (when it reports about Listening
>> for packets). That grabs all the useful config information.
>>
>> Then you use radmin to capture auth information for a particular
>> client. There's some information on the FR web page:
>> http://freeradius.org/radiusd/man/radmin.html
>>
>> I did a post on how you can filter out by attribute a while back:
>> http://notes.asd.me.uk/2014/09/16/debugging-freeradius-packets-with-radmin/
>>
>>
>> But the best way really is to reproduce it on a test RADIUS
>> server with one or two clients. That doesn't have to be hard -
>> a great way is to add proxy config to your production servers over
>> to a test server. When you want to capture something like this,
>> just proxy particular client(s) over using unlang to select based
>> on some attributes. Could be MAC address, realm, SSID, location
>> etc. Makes testing things much easier and more flexible, and of
>> course the debug logs on the test server will be smaller.
>>
>> Matthew
>>
>>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list