CoA -> REST

[Matthew Newton]

On Tue, Dec 20, 2016 at 03:21:55PM +0000, adrian.p.smith at bt.com wrote:
> I enabled that virtual server by linking it into sites-enabled.
> 
> I then added a single line:
> 
> rest.authenticate
> 
> in the "server coa" recv-coa section immediately before the "ok" line.
> 
> adding just "rest" stopped the server from starting.
> 
> 
> 
> I then send the server a CoA using radclient.
> 
> I see the server receiving it (as per the debug output below), but no mention of "rest.authenticate".

If I start from a completely clean 3.0.x install, and link coa
into sites-enabled, and send it a coa packet with radclient, I get

eceived CoA-Request Id 27 from 127.0.0.1:43031 to 127.0.0.1:3799 length 25
(0)   User-Name = "test"
(0) # Executing section recv-coa from file /opt/fr3/etc/raddb/sites-enabled/coa
(0)   recv-coa {
(0)     [suffix] = noop
(0)     [ok] = ok
(0)   } # recv-coa = ok
(0) # Executing section send-coa from file /opt/fr3/etc/raddb/sites-enabled/coa
(0)   send-coa {
(0)     [ok] = ok
(0)   } # send-coa = ok
(0) Sent CoA-ACK Id 27 from 127.0.0.1:3799 to 127.0.0.1:43031 length 0
(0) Finished request

so... as Alan said: what is the *entire* debug output?

All the debug lines right from and including the FreeRADIUS banner at the top
actually matter, contrary to popular belief on this list :(.

Or, compare to a completely clean install, see what the difference is, and work
from there.

Matthew



> -----Original Message-----
> From: Freeradius-Users [mailto:freeradius-users-bounces+adrian.p.smith=bt.com at lists.freeradius.org] On Behalf Of Alan DeKok
> Sent: 20 December 2016 15:02
> To: FreeRadius users mailing list
> Subject: Re: CoA -> REST
> 
> On Dec 20, 2016, at 5:40 AM, adrian.p.smith at bt.com wrote:
> > 
> > Thanks for the tip. I tried this and the server does now start up.
> > 
> > When I send it a CoA however, I see no sign of the REST module being called:
> > 
> > (0) Received CoA-Request Id 217 from 127.0.0.1:45490 to 127.0.0.1:3799 length 38
> > (0)   User-Name = "adrian"
> > (0)   Calling-Station-Id = "aa-bb-cc"
> > (0) Sent CoA-ACK Id 217 from 127.0.0.1:3799 to 127.0.0.1:45490 length 0
> > (0) Finished request
> > 
> > Anything else I've missed?
> 
>   Read the *entire* debug log.
> 
>   FreeRADIUS doesn't magically ignore virtual servers.  If it's not using a virtual server, it's because of a local configuration issue.
> 
>   The default CoA server in raddb/sites-available/coa works when it's enabled.
> 
>   So... what did you do?
> 
>   Alan DeKok.

-- 
Matthew Newton, Ph.D. <mcn4 at leicester.ac.uk>

Systems Specialist, Infrastructure Services,
I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom

For IT help contact helpdesk extn. 2253, <ithelp at le.ac.uk>