FR 3.0.11 \ ubuntu 16.04 winbind Active directory group validation issue.
Jean-Pierre Zurbrügg
jp.zurbrugg at gmail.com
Wed Jun 8 19:59:38 CEST 2016
Hello everyone,
Ubuntu 16.04 64bit
Freeradius 3.0.11 (from ppa.launchpad.net/freeradius/stable-3.0/ubuntu)
Samba 4.3.9-Ubuntu
I have a freeradius 3.0.4 (git #7c9d5fb) running under ubuntu 14.04
correctly and I'm Trying to replicate this functionality on a new
Ubuntu 16.04 LAB VM but I'm having dificulties validating Group
memberships via a Winbind ~ Active Directory setup. The configuration
was done manually; I did not copy any files from the FR 3.0.4 machine.
I have disabled sites-enabled/default and put my own site called DGP
along with a default inner-tunnel configuration file.
In the DGP site's Post-Auth {} section I'm trying to validate the
'Group' Attribute via the following IF statement:
if (Group == "ADLAB\\\\fw-wifi-access") {} which generates the
following line while debugging:
Failed resolving GID: No error
winbindd -SFd5 generates the following debug snippet when validating
the IF statement above:
----
getpwnam ADLAB\userx
getgrnam ADLAB\\fw-wifi-access
child daemon request 59
msrpc_name_to_sid: name=ADLAB\\fw-wifi-access
name_to_sid [rpc] ADLAB\\fw-wifi-access for domain ADLAB
rpc_api_pipe: host dc01.adlab.local
rpc_write_send: data_to_write: 176
rpc_read_send: data_to_read: 176
Finished processing child request 59
Could not convert sid S-0-0: NT_STATUS_NONE_MAPPED
----
While troubleshooting I changed the IF statement to: if (Group ==
"ADLAB\\fw-wifi-access") {}
and this time I no longer get the 'Failed resolving GID: No error'
entry but the IF statement
returns false instead of true (the AD user is a member of this group).
I don't know what else to check in order to correct this problem. I'd
appreciate any tips given.
Thanks in advance!
#####################################################
Troubleshooting I've done:
wbinfo -u # returns all AD users without the domain Preffix
wbinfo -g # returns AD groups without the domain Preffix
ntlm_auth --request-nt-key --domain=<domain> --username=<user> # works
id <user> # returns user group membership <number>(<Group Name>)
id <DOMAIN>\<user> # returns user group membership <number>(<Group Name>)
wbinfo -G 7513 # returns SID value
I need to execute id <user> or id <domain>\<user> before I can use
this command.
wbinfo -Y S-1-5-21-297524306-2253920702-176340032-2513 # returns 7513
I've tried validating against ADLAB\\\\, ADLAB\\, and group name without prefix.
I've tried using all CAPS and all LOWERCASE for domain and group name.
### user freerad group memberships:
root at lnx1604lab01:/# groups freerad
freerad : freerad shadow winbindd_priv ssl-cert
root at lnx1604lab01:/# ls -lh /var/run/samba/ | grep
winbindd_privileged; ls -lh /var/lib/samba |grep winbindd_privileged
drwxr-x--- 2 root winbindd_priv 40 Jun 7 10:18 winbindd_privileged
drwxr-x--- 2 root winbindd_priv 4.0K Jun 8 13:36 winbindd_privileged
### Configuration files
/etc/krb5.conf
===========
[libdefaults]
default_realm = ADLAB.LOCAL
ticket_lifetime = 24000
default_tgs_entypes = rc4-hmac des-cbc-md5
default_tkt__enctypes = rc4-hmac des-cbc-md5
permitted_enctypes = rc4-hmac des-cbc-md5
dns_lookup_realm = true
dns_lookup_kdc = true
[realms]
ADLAB.LOCAL = {
kdc = dc01.adlab.local:88
kdc = dc02.adlab.local:88
admin_server = dc01.adlab.local #:749
default_domain = adlab.local
}
[domain_realm]
.adlab.local = ADLAB.LOCAL
adlab.local = ADLAB.LOCAL
[appdefaults]
pam = {
debug = false
ticket_lifetime = 36000
renew_lifetime = 36000
forwardable = true
krb4_convert = false
}
[logging]
default = FILE:/var/log/krb5libs.log
kdc = FILE:/var/log/krb5kdc.log
admin_server = FILE:/var/log/kadmind.log
===========
/etc/nsswitch.conf
===========
passwd: compat winbind
group: compat winbind
shadow: compat winbind
gshadow: files
hosts: files dns
networks: files
protocols: db files winbind
services: db files winbind
ethers: db files
rpc: db files
netgroup: nis winbind
===========
/etc/samba.smb.conf
===========
[global]
netbios name = lnx1604vmlab01
workgroup = ADLAB
security = ADS
realm = ADLAB.LOCAL
encrypt passwords = yes
idmap config *:backend = rid
idmap config *:range = 5000-100000
idmap cache time = 300
winbind cache time = 300
winbind trusted domains only = no
winbind use default domain = yes
winbind enum users = yes
winbind enum groups = yes
winbind refresh tickets = yes
template shell = /bin/false
load printers = no
printing = bsd
printcap name = /dev/null
disable spoolss = yes
[homes]
comment = Home Directories
browseable = no
writable = yes
============
/etc/freeradius/mods-enabled/mschap
============
mschap {
winbind_username = "%{mschap:User-Name}"
winbind_domain = "ADLAB"
pool {
start = ${thread[pool].start_servers}
min = ${thread[pool].min_spare_servers}
max = ${thread[pool].max_servers}
spare = ${thread[pool].max_spare_servers}
uses = 0
retry_delay = 30
lifetime = 86400
cleanup_interval = 300
idle_timeout = 600
}
passchange {
}
}
============
## freeradius -X
============
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.06.08 13:03:58 =~=~=~=~=~=~=~=~=~=~=~=
free radius -X
Server was built with:
accounting : yes
authentication : yes
ascend-binary-attributes : yes
coa : yes
control-socket : yes
detail : yes
dhcp : yes
dynamic-clients : yes
osfc2 : no
proxy : yes
regex-pcre : no
regex-posix : yes
regex-posix-extended : yes
session-management : yes
stats : yes
tcp : yes
threads : yes
tls : yes
unlang : yes
vmps : yes
developer : no
Server core libs:
freeradius-server : 3.0.11
talloc : 2.0.*
ssl : 1.0.2g release
Endianness:
little
Compilation flags:
cppflags : -Wdate-time -D_FORTIFY_SOURCE=2
cflags : -I/build/freeradius-G88Mfz/freeradius-3.0.11
-I/build/freeradius-G88Mfz/freeradius-3.0.11/src -include
/build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/autoconf.h
-include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/build.h
-include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/features.h
-include /build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/radpaths.h
-fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat
-Werror=format-security -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT
-D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1
ldflags : -Wl,-Bsymbolic-functions -Wl,-z,relro
libs : -lcrypto -lssl -ltalloc -lcap -lnsl -lresolv -ldl
-lpthread -lreadline
Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/sradutmp
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/accounting
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/DGP
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client firewall.adlab.local {
ipaddr = firewall.adlab.local IPv4 address [172.16.250.2]
require_message_authenticator = no
secret = <<< secret >>>
shortname = "Firewall"
nas_type = "other"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client Cisco_SMB_APs {
ipaddr = 10.0.0.0/29
require_message_authenticator = no
secret = <<< secret >>>
shortname = "Cisco_Access_Points"
nas_type = "other"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
[1mDebugger not attached [0m
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = eap
# Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/mods-enabled/digest
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
# Loaded module rlm_exec
# Loading module "exec" from file /etc/freeradius/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/mods-enabled/eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_detail
# Loading module "detail" from file /etc/freeradius/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loading module "echo" from file /etc/freeradius/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/freeradius/mods-enabled/expiration
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/mods-enabled/files
files {
filename = "/etc/freeradius/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
# Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/mods-enabled/chap
# Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
instantiate {
}
# Instantiating module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[1m [33m[/etc/freeradius/mods-config/attr_filter/access_reject]:11
Check item "FreeRADIUS-Response-Delay" found in filter list for realm
"DEFAULT". [0m
[1m [33m[/etc/freeradius/mods-config/attr_filter/access_reject]:11
Check item "FreeRADIUS-Response-Delay-USec" found in filter list for
realm "DEFAULT". [0m
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/accounting_response
# Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.pem"
certificate_file = "/etc/freeradius/certs/server.pem"
ca_file = "/etc/freeradius/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
# Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
# Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 86400
cleanup_interval = 300
idle_timeout = 600
retry_delay = 30
spread = no
}
[1mrlm_mschap (mschap): Opening additional connection (0), 1 of 32
pending slots used [0m
[1mrlm_mschap (mschap): Opening additional connection (1), 1 of 31
pending slots used [0m
[1mrlm_mschap (mschap): Opening additional connection (2), 1 of 30
pending slots used [0m
[1mrlm_mschap (mschap): Opening additional connection (3), 1 of 29
pending slots used [0m
[1mrlm_mschap (mschap): Opening additional connection (4), 1 of 28
pending slots used [0m
rlm_mschap (mschap): authenticating directly to winbind
# Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
# Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
# Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
# Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
# Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "linelog" from file
/etc/freeradius/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
# Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
# Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
# Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
# Instantiating module "userlock" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "notfound" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
# Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
# Instantiating module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
server DGP { # from file /etc/freeradius/sites-enabled/DGP
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server DGP
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server DGP
Listening on proxy address * port 49232
[1mReady to process requests [0m
(0) Received Access-Request Id 78 from 172.16.250.2:1051 to
172.16.13.30:1812 length 161
(0) User-Name = "aduserx"
(0) NAS-IP-Address = 0.0.0.0
(0) NAS-Port = 0
(0) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen"
(0) Calling-Station-Id = "8C-3A-E3-5D-9E-30"
(0) Framed-MTU = 1400
(0) NAS-Port-Type = Wireless-802.11
(0) Connect-Info = "CONNECT 11Mbps 802.11b"
(0) EAP-Message = 0x0200000e016a7a75726272756767
(0) Message-Authenticator = 0xe49c7d30c87d3a085600a4624bb77d4a
(0) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [mschap] = noop
(0) ntdomain: Checking for prefix before "\"
(0) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL
(0) ntdomain: No such realm "NULL"
(0) [ntdomain] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 0 length 14
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/DGP
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_peap to process data
(0) eap_peap: Initiating new EAP-TLS session
(0) eap_peap: Flushing SSL sessions (of #0)
(0) eap_peap: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 1 length 6
(0) eap: EAP session adding &reply:State = 0x0c948df90c95944a
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found. Ignoring.
(0) # Executing group from file /etc/freeradius/sites-enabled/DGP
(0) Sent Access-Challenge Id 78 from 172.16.13.30:1812 to
172.16.250.2:1051 length 0
(0) EAP-Message = 0x010100061920
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x0c948df90c95944ac55dada148fa7051
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 79 from 172.16.250.2:1051 to
172.16.13.30:1812 length 333
(1) User-Name = "aduserx"
(1) NAS-IP-Address = 0.0.0.0
(1) NAS-Port = 0
(1) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen"
(1) Calling-Station-Id = "8C-3A-E3-5D-9E-30"
(1) Framed-MTU = 1400
(1) NAS-Port-Type = Wireless-802.11
(1) Connect-Info = "CONNECT 11Mbps 802.11b"
(1) EAP-Message =
0x020100a819800000009e1603010099010000950303cc3f208cada8a1f17e9e1d9e7f42efade37f8b478c738e495d9beaeeea6fd52900003cc02cc030009fc02bc02f009ec00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a00ff010000
(1) State = 0x0c948df90c95944ac55dada148fa7051
(1) Message-Authenticator = 0xe63d32498949d51cd56ce158e3cebc53
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [mschap] = noop
(1) ntdomain: Checking for prefix before "\"
(1) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL
(1) ntdomain: No such realm "NULL"
(1) [ntdomain] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 1 length 168
(1) eap: Continuing tunnel setup
(1) [eap] = ok
(1) } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/sites-enabled/DGP
(1) authenticate {
(1) eap: Expiring EAP session with state 0x0c948df90c95944a
(1) eap: Finished EAP session with state 0x0c948df90c95944a
(1) eap: Previous EAP request found for state 0x0c948df90c95944a,
released from the list
(1) eap: Peer sent packet with method EAP PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Continuing EAP-TLS
(1) eap_peap: Peer indicated complete TLS record size will be 158 bytes
(1) eap_peap: Got complete TLS record (158 bytes)
(1) eap_peap: [eaptls verify] = length included
(1) eap_peap: (other): before/accept initialization
(1) eap_peap: TLS_accept: before/accept initialization
(1) eap_peap: <<< recv TLS 1.2 [length 0099]
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: >>> send TLS 1.2 [length 0059]
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: >>> send TLS 1.2 [length 08d3]
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: >>> send TLS 1.2 [length 014d]
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: >>> send TLS 1.2 [length 0004]
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: TLS_accept: Need to read more data: unknown state
(1) eap_peap: TLS_accept: Need to read more data: unknown state
(1) eap_peap: In SSL Handshake Phase
(1) eap_peap: In SSL Accept mode
(1) eap_peap: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 2 length 1004
(1) eap: EAP session adding &reply:State = 0x0c948df90d96944a
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found. Ignoring.
(1) # Executing group from file /etc/freeradius/sites-enabled/DGP
(1) Sent Access-Challenge Id 79 from 172.16.13.30:1812 to
172.16.250.2:1051 length 0
(1) EAP-Message =
0x010203ec19c000000a9116030300590200005503032b3102ca557a84a026f8b44661dc9a6945f159702d4c3778feedd6e3def69c1b202b38a0f48cccd902c2478e14eb6a8ea7a71e062dc5ad73f4f58ab10c6fd774e1c03000000dff01000100000b00040300010216030308d30b0008cf0008cc0003de
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x0c948df90d96944ac55dada148fa7051
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 80 from 172.16.250.2:1051 to
172.16.13.30:1812 length 171
(2) User-Name = "aduserx"
(2) NAS-IP-Address = 0.0.0.0
(2) NAS-Port = 0
(2) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen"
(2) Calling-Station-Id = "8C-3A-E3-5D-9E-30"
(2) Framed-MTU = 1400
(2) NAS-Port-Type = Wireless-802.11
(2) Connect-Info = "CONNECT 11Mbps 802.11b"
(2) EAP-Message = 0x020200061900
(2) State = 0x0c948df90d96944ac55dada148fa7051
(2) Message-Authenticator = 0x3788c6cbdee3bb5fd6703bae1de25f28
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [mschap] = noop
(2) ntdomain: Checking for prefix before "\"
(2) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL
(2) ntdomain: No such realm "NULL"
(2) [ntdomain] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 2 length 6
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/sites-enabled/DGP
(2) authenticate {
(2) eap: Expiring EAP session with state 0x0c948df90d96944a
(2) eap: Finished EAP session with state 0x0c948df90d96944a
(2) eap: Previous EAP request found for state 0x0c948df90d96944a,
released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer ACKed our handshake fragment
(2) eap_peap: [eaptls verify] = request
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 3 length 1000
(2) eap: EAP session adding &reply:State = 0x0c948df90e97944a
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found. Ignoring.
(2) # Executing group from file /etc/freeradius/sites-enabled/DGP
(2) Sent Access-Challenge Id 80 from 172.16.13.30:1812 to
172.16.250.2:1051 length 0
(2) EAP-Message =
0x010303e81940f7a2d08dc361397f488f4951e6cce8d05097282d76dbc234e99e3dbdd833615a88381ef0c4ee42234e370ea9276272ef54c442fc912a52acd7bb3f0aafb9fe6bf97ae2f72135c9d718e1feec6cafe27b650372f735b78a991053addf073ce29587b5541b6c4a338b060004e8308204e430
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x0c948df90e97944ac55dada148fa7051
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 81 from 172.16.250.2:1051 to
172.16.13.30:1812 length 171
(3) User-Name = "aduserx"
(3) NAS-IP-Address = 0.0.0.0
(3) NAS-Port = 0
(3) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen"
(3) Calling-Station-Id = "8C-3A-E3-5D-9E-30"
(3) Framed-MTU = 1400
(3) NAS-Port-Type = Wireless-802.11
(3) Connect-Info = "CONNECT 11Mbps 802.11b"
(3) EAP-Message = 0x020300061900
(3) State = 0x0c948df90e97944ac55dada148fa7051
(3) Message-Authenticator = 0x6290667e32b39cfbd59fe58122d8ff91
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [mschap] = noop
(3) ntdomain: Checking for prefix before "\"
(3) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL
(3) ntdomain: No such realm "NULL"
(3) [ntdomain] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 3 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/sites-enabled/DGP
(3) authenticate {
(3) eap: Expiring EAP session with state 0x0c948df90e97944a
(3) eap: Finished EAP session with state 0x0c948df90e97944a
(3) eap: Previous EAP request found for state 0x0c948df90e97944a,
released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 4 length 723
(3) eap: EAP session adding &reply:State = 0x0c948df90f90944a
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found. Ignoring.
(3) # Executing group from file /etc/freeradius/sites-enabled/DGP
(3) Sent Access-Challenge Id 81 from 172.16.13.30:1812 to
172.16.250.2:1051 length 0
(3) EAP-Message =
0x010402d3190020417574686f7269747982090085d1953cb7da2d06300f0603551d130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b050003820101
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x0c948df90f90944ac55dada148fa7051
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 82 from 172.16.250.2:1051 to
172.16.13.30:1812 length 301
(4) User-Name = "aduserx"
(4) NAS-IP-Address = 0.0.0.0
(4) NAS-Port = 0
(4) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen"
(4) Calling-Station-Id = "8C-3A-E3-5D-9E-30"
(4) Framed-MTU = 1400
(4) NAS-Port-Type = Wireless-802.11
(4) Connect-Info = "CONNECT 11Mbps 802.11b"
(4) EAP-Message =
0x0204008819800000007e16030300461000004241042f6fa8e77d969dd0875e49f54f38d23517adea74715c1de8c7b0417a69fee840621f4b7637b5728d86d89fab8a4a601128397b8f374397420d8e1a4e83966f781403030001011603030028000000000000000081e7bd4d2f233991ed030e9ae59cda
(4) State = 0x0c948df90f90944ac55dada148fa7051
(4) Message-Authenticator = 0xbeca29bafaaa9ff462228b6f12c4ac93
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [mschap] = noop
(4) ntdomain: Checking for prefix before "\"
(4) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL
(4) ntdomain: No such realm "NULL"
(4) [ntdomain] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 4 length 136
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/sites-enabled/DGP
(4) authenticate {
(4) eap: Expiring EAP session with state 0x0c948df90f90944a
(4) eap: Finished EAP session with state 0x0c948df90f90944a
(4) eap: Previous EAP request found for state 0x0c948df90f90944a,
released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(4) eap_peap: Got complete TLS record (126 bytes)
(4) eap_peap: [eaptls verify] = length included
(4) eap_peap: <<< recv TLS 1.2 [length 0046]
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: <<< recv TLS 1.2 [length 0001]
(4) eap_peap: <<< recv TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: >>> send TLS 1.2 [length 0001]
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: >>> send TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: (other): SSL negotiation finished successfully
(4) eap_peap: SSL Connection Established
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 5 length 57
(4) eap: EAP session adding &reply:State = 0x0c948df90891944a
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found. Ignoring.
(4) # Executing group from file /etc/freeradius/sites-enabled/DGP
(4) Sent Access-Challenge Id 82 from 172.16.13.30:1812 to
172.16.250.2:1051 length 0
(4) EAP-Message =
0x01050039190014030300010116030300286a7712bfdeca45ee4d230c3b58490fa802e10f1bd31554d6333c5dda7197474e0011cc221d32e978
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x0c948df90891944ac55dada148fa7051
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 83 from 172.16.250.2:1051 to
172.16.13.30:1812 length 171
(5) User-Name = "aduserx"
(5) NAS-IP-Address = 0.0.0.0
(5) NAS-Port = 0
(5) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen"
(5) Calling-Station-Id = "8C-3A-E3-5D-9E-30"
(5) Framed-MTU = 1400
(5) NAS-Port-Type = Wireless-802.11
(5) Connect-Info = "CONNECT 11Mbps 802.11b"
(5) EAP-Message = 0x020500061900
(5) State = 0x0c948df90891944ac55dada148fa7051
(5) Message-Authenticator = 0xb64bd8e270cafc84d8347ce856f2d98d
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [mschap] = noop
(5) ntdomain: Checking for prefix before "\"
(5) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL
(5) ntdomain: No such realm "NULL"
(5) [ntdomain] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 5 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/sites-enabled/DGP
(5) authenticate {
(5) eap: Expiring EAP session with state 0x0c948df90891944a
(5) eap: Finished EAP session with state 0x0c948df90891944a
(5) eap: Previous EAP request found for state 0x0c948df90891944a,
released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(5) eap_peap: [eaptls verify] = success
(5) eap_peap: [eaptls process] = success
(5) eap_peap: Session established. Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 6 length 40
(5) eap: EAP session adding &reply:State = 0x0c948df90992944a
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found. Ignoring.
(5) # Executing group from file /etc/freeradius/sites-enabled/DGP
(5) Sent Access-Challenge Id 83 from 172.16.13.30:1812 to
172.16.250.2:1051 length 0
(5) EAP-Message =
0x010600281900170303001d6a7712bfdeca45ef8ddcaf5c6cb51a6223000f64d52c936efe5896b5ac
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x0c948df90992944ac55dada148fa7051
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 84 from 172.16.250.2:1051 to
172.16.13.30:1812 length 210
(6) User-Name = "aduserx"
(6) NAS-IP-Address = 0.0.0.0
(6) NAS-Port = 0
(6) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen"
(6) Calling-Station-Id = "8C-3A-E3-5D-9E-30"
(6) Framed-MTU = 1400
(6) NAS-Port-Type = Wireless-802.11
(6) Connect-Info = "CONNECT 11Mbps 802.11b"
(6) EAP-Message =
0x0206002d1900170303002200000000000000015c51bc5a9da44139c7c4399f6ef15874a9b312f049a986285a0f
(6) State = 0x0c948df90992944ac55dada148fa7051
(6) Message-Authenticator = 0xd2e3c281f9cc097b89e762cfd918a2a4
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [mschap] = noop
(6) ntdomain: Checking for prefix before "\"
(6) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL
(6) ntdomain: No such realm "NULL"
(6) [ntdomain] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 6 length 45
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/sites-enabled/DGP
(6) authenticate {
(6) eap: Expiring EAP session with state 0x0c948df90992944a
(6) eap: Finished EAP session with state 0x0c948df90992944a
(6) eap: Previous EAP request found for state 0x0c948df90992944a,
released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: [eaptls verify] = ok
(6) eap_peap: Done initial handshake
(6) eap_peap: [eaptls process] = ok
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - aduserx
(6) eap_peap: Got inner identity 'aduserx'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap: EAP-Message = 0x0206000e016a7a75726272756767
(6) eap_peap: Setting User-Name to aduserx
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap: EAP-Message = 0x0206000e016a7a75726272756767
(6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap: User-Name = "aduserx"
(6) Virtual server inner-tunnel received request
(6) EAP-Message = 0x0206000e016a7a75726272756767
(6) FreeRADIUS-Proxied-To = 127.0.0.1
(6) User-Name = "aduserx"
[1m [33m(6) WARNING: Outer and inner identities are the same. User
privacy is compromised. [0m
(6) server inner-tunnel {
(6) # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [chap] = noop
(6) [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) update control {
(6) &Proxy-To-Realm := LOCAL
(6) } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 6 length 14
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(6) authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 7 length 43
(6) eap: EAP session adding &reply:State = 0xfaf66012faf17ad8
(6) [eap] = handled
(6) } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) EAP-Message =
0x0107002b1a01070026102629a23889fe4ce33305aecfb81f7996667265657261646975732d332e302e3131
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xfaf66012faf17ad8ec30d73ab14f50bf
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap: EAP-Message =
0x0107002b1a01070026102629a23889fe4ce33305aecfb81f7996667265657261646975732d332e302e3131
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0xfaf66012faf17ad8ec30d73ab14f50bf
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap: EAP-Message =
0x0107002b1a01070026102629a23889fe4ce33305aecfb81f7996667265657261646975732d332e302e3131
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0xfaf66012faf17ad8ec30d73ab14f50bf
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 7 length 74
(6) eap: EAP session adding &reply:State = 0x0c948df90a93944a
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found. Ignoring.
(6) # Executing group from file /etc/freeradius/sites-enabled/DGP
(6) Sent Access-Challenge Id 84 from 172.16.13.30:1812 to
172.16.250.2:1051 length 0
(6) EAP-Message =
0x0107004a1900170303003f6a7712bfdeca45f0a86e54abd9d1fbc4804499a967fc1a0ad5e739765ddebbcd4300373fb09136def0c3cc710fd4e812c06be39efd399c8d3e5f60c795bcbb
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x0c948df90a93944ac55dada148fa7051
(6) Finished request
Waking up in 4.9 seconds.
(7) Received Access-Request Id 85 from 172.16.250.2:1051 to
172.16.13.30:1812 length 264
(7) User-Name = "aduserx"
(7) NAS-IP-Address = 0.0.0.0
(7) NAS-Port = 0
(7) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen"
(7) Calling-Station-Id = "8C-3A-E3-5D-9E-30"
(7) Framed-MTU = 1400
(7) NAS-Port-Type = Wireless-802.11
(7) Connect-Info = "CONNECT 11Mbps 802.11b"
(7) EAP-Message =
0x02070063190017030300580000000000000002df32fe53d078e81d8d34c797d011033b1e919325d9f7f7e82de5f1749629e3f56203c036ac35923940832ac0184402009bffddc029c9fe958a1767ddd235538a9942068710d06186584e77755bdd3a8e
(7) State = 0x0c948df90a93944ac55dada148fa7051
(7) Message-Authenticator = 0x992ef68bda045a661a0b6539dde2f45d
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [mschap] = noop
(7) ntdomain: Checking for prefix before "\"
(7) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL
(7) ntdomain: No such realm "NULL"
(7) [ntdomain] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 7 length 99
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/sites-enabled/DGP
(7) authenticate {
(7) eap: Expiring EAP session with state 0xfaf66012faf17ad8
(7) eap: Finished EAP session with state 0x0c948df90a93944a
(7) eap: Previous EAP request found for state 0x0c948df90a93944a,
released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap: EAP-Message =
0x020700441a0207003f31e4d82e444cf6d7c62bf699312526c9be00000000000000001eafc668c13d5f2502d36d4c195e1f7cbb8c2eac9f56bb55006a7a75726272756767
(7) eap_peap: Setting User-Name to aduserx
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap: EAP-Message =
0x020700441a0207003f31e4d82e444cf6d7c62bf699312526c9be00000000000000001eafc668c13d5f2502d36d4c195e1f7cbb8c2eac9f56bb55006a7a75726272756767
(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap: User-Name = "aduserx"
(7) eap_peap: State = 0xfaf66012faf17ad8ec30d73ab14f50bf
(7) Virtual server inner-tunnel received request
(7) EAP-Message =
0x020700441a0207003f31e4d82e444cf6d7c62bf699312526c9be00000000000000001eafc668c13d5f2502d36d4c195e1f7cbb8c2eac9f56bb55006a7a75726272756767
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "aduserx"
(7) State = 0xfaf66012faf17ad8ec30d73ab14f50bf
[1m [33m(7) WARNING: Outer and inner identities are the same. User
privacy is compromised. [0m
(7) server inner-tunnel {
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [chap] = noop
(7) [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 7 length 68
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) [expiration] = noop
(7) [logintime] = noop
(7) [pap] = noop
(7) } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(7) authenticate {
(7) eap: Expiring EAP session with state 0xfaf66012faf17ad8
(7) eap: Finished EAP session with state 0xfaf66012faf17ad8
(7) eap: Previous EAP request found for state 0xfaf66012faf17ad8,
released from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file
/etc/freeradius/sites-enabled/inner-tunnel
(7) eap_mschapv2: Auth-Type MS-CHAP {
(7) mschap: Creating challenge hash with username: aduserx
(7) mschap: Client is using MS-CHAPv2
(7) mschap: EXPAND %{mschap:User-Name}
(7) mschap: --> aduserx
rlm_mschap (mschap): Reserved connection (0)
(7) mschap: sending authentication request user='aduserx' domain='ADLAB'
rlm_mschap (mschap): Released connection (0)
[1mrlm_mschap (mschap): Need 5 more connections to reach 10 spares [0m
[1mrlm_mschap (mschap): Opening additional connection (5), 1 of 27
pending slots used [0m
(7) mschap: Authenticated successfully
(7) mschap: Adding MS-CHAPv2 MPPE keys
(7) [mschap] = ok
(7) } # Auth-Type MS-CHAP = ok
(7) MSCHAP Success
(7) eap: Sending EAP Request (code 1) ID 8 length 51
(7) eap: EAP session adding &reply:State = 0xfaf66012fbfe7ad8
(7) [eap] = handled
(7) } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) EAP-Message =
0x010800331a0307002e533d30324536363230413532364635334437423946343037413145463545314430313341373945434145
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xfaf66012fbfe7ad8ec30d73ab14f50bf
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap: EAP-Message =
0x010800331a0307002e533d30324536363230413532364635334437423946343037413145463545314430313341373945434145
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: State = 0xfaf66012fbfe7ad8ec30d73ab14f50bf
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap: EAP-Message =
0x010800331a0307002e533d30324536363230413532364635334437423946343037413145463545314430313341373945434145
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: State = 0xfaf66012fbfe7ad8ec30d73ab14f50bf
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 8 length 82
(7) eap: EAP session adding &reply:State = 0x0c948df90b9c944a
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) Post-Auth-Type sub-section not found. Ignoring.
(7) # Executing group from file /etc/freeradius/sites-enabled/DGP
(7) Sent Access-Challenge Id 85 from 172.16.13.30:1812 to
172.16.250.2:1051 length 0
(7) EAP-Message =
0x01080052190017030300476a7712bfdeca45f19f342212f694d45b80b896ebcee771ec397d2100a4b87cdc272b7d8291b15696c8e4aeac54d7868b4752ad6fc28d46ea667bbd56ce60f885c15eba442a7ac2
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x0c948df90b9c944ac55dada148fa7051
(7) Finished request
Waking up in 2.3 seconds.
(8) Received Access-Request Id 86 from 172.16.250.2:1051 to
172.16.13.30:1812 length 202
(8) User-Name = "aduserx"
(8) NAS-IP-Address = 0.0.0.0
(8) NAS-Port = 0
(8) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen"
(8) Calling-Station-Id = "8C-3A-E3-5D-9E-30"
(8) Framed-MTU = 1400
(8) NAS-Port-Type = Wireless-802.11
(8) Connect-Info = "CONNECT 11Mbps 802.11b"
(8) EAP-Message =
0x020800251900170303001a00000000000000032080d584931d77e66c978187280b44621b13
(8) State = 0x0c948df90b9c944ac55dada148fa7051
(8) Message-Authenticator = 0xf939bd03176eb4be05b4e654f7fabdad
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) [mschap] = noop
(8) ntdomain: Checking for prefix before "\"
(8) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL
(8) ntdomain: No such realm "NULL"
(8) [ntdomain] = noop
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 8 length 37
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/sites-enabled/DGP
(8) authenticate {
(8) eap: Expiring EAP session with state 0xfaf66012fbfe7ad8
(8) eap: Finished EAP session with state 0x0c948df90b9c944a
(8) eap: Previous EAP request found for state 0x0c948df90b9c944a,
released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap: EAP-Message = 0x020800061a03
(8) eap_peap: Setting User-Name to aduserx
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap: EAP-Message = 0x020800061a03
(8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap: User-Name = "aduserx"
(8) eap_peap: State = 0xfaf66012fbfe7ad8ec30d73ab14f50bf
(8) Virtual server inner-tunnel received request
(8) EAP-Message = 0x020800061a03
(8) FreeRADIUS-Proxied-To = 127.0.0.1
(8) User-Name = "aduserx"
(8) State = 0xfaf66012fbfe7ad8ec30d73ab14f50bf
[1m [33m(8) WARNING: Outer and inner identities are the same. User
privacy is compromised. [0m
(8) server inner-tunnel {
(8) session-state: No cached attributes
(8) # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [chap] = noop
(8) [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) update control {
(8) &Proxy-To-Realm := LOCAL
(8) } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 8 length 6
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8) [eap] = updated
(8) [expiration] = noop
(8) [logintime] = noop
(8) [pap] = noop
(8) } # authorize = updated
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(8) authenticate {
(8) eap: Expiring EAP session with state 0xfaf66012fbfe7ad8
(8) eap: Finished EAP session with state 0xfaf66012fbfe7ad8
(8) eap: Previous EAP request found for state 0xfaf66012fbfe7ad8,
released from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap: Sending EAP Success (code 3) ID 8 length 4
(8) eap: Freeing handler
(8) [eap] = ok
(8) } # authenticate = ok
(8) # Executing section post-auth from file
/etc/freeradius/sites-enabled/inner-tunnel
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8) MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) MS-MPPE-Send-Key = 0xede0d90922d00070b7b1113f146018e7
(8) MS-MPPE-Recv-Key = 0xf1a558db958dee1bdcafe3b0d2414a8c
(8) EAP-Message = 0x03080004
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) User-Name = "aduserx"
(8) eap_peap: Got tunneled reply code 2
(8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) eap_peap: MS-MPPE-Send-Key = 0xede0d90922d00070b7b1113f146018e7
(8) eap_peap: MS-MPPE-Recv-Key = 0xf1a558db958dee1bdcafe3b0d2414a8c
(8) eap_peap: EAP-Message = 0x03080004
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: User-Name = "aduserx"
(8) eap_peap: Got tunneled reply RADIUS code 2
(8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) eap_peap: MS-MPPE-Send-Key = 0xede0d90922d00070b7b1113f146018e7
(8) eap_peap: MS-MPPE-Recv-Key = 0xf1a558db958dee1bdcafe3b0d2414a8c
(8) eap_peap: EAP-Message = 0x03080004
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: User-Name = "aduserx"
(8) eap_peap: Tunneled authentication was successful
(8) eap_peap: SUCCESS
(8) eap: Sending EAP Request (code 1) ID 9 length 46
(8) eap: EAP session adding &reply:State = 0x0c948df9049d944a
(8) [eap] = handled
(8) } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) Post-Auth-Type sub-section not found. Ignoring.
(8) # Executing group from file /etc/freeradius/sites-enabled/DGP
(8) Sent Access-Challenge Id 86 from 172.16.13.30:1812 to
172.16.250.2:1051 length 0
(8) EAP-Message =
0x0109002e190017030300236a7712bfdeca45f21f0f88d38fff6f02e0e3463cab4d2ea732132901688365cc60074c
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0x0c948df9049d944ac55dada148fa7051
(8) Finished request
Waking up in 2.3 seconds.
(9) Received Access-Request Id 87 from 172.16.250.2:1051 to
172.16.13.30:1812 length 211
(9) User-Name = "aduserx"
(9) NAS-IP-Address = 0.0.0.0
(9) NAS-Port = 0
(9) Called-Station-Id = "3A-5B-0E-F3-6B-D3:arkflugen"
(9) Calling-Station-Id = "8C-3A-E3-5D-9E-30"
(9) Framed-MTU = 1400
(9) NAS-Port-Type = Wireless-802.11
(9) Connect-Info = "CONNECT 11Mbps 802.11b"
(9) EAP-Message =
0x0209002e1900170303002300000000000000049dc53b0eba69379fa5cfa3ea8ce4c76f5cba1718003ce22872b166
(9) State = 0x0c948df9049d944ac55dada148fa7051
(9) Message-Authenticator = 0xf70416c4d3260d2e40d7be72eb8de636
(9) session-state: No cached attributes
(9) # Executing section authorize from file /etc/freeradius/sites-enabled/DGP
(9) authorize {
(9) policy filter_username {
(9) if (&User-Name) {
(9) if (&User-Name) -> TRUE
(9) if (&User-Name) {
(9) if (&User-Name =~ / /) {
(9) if (&User-Name =~ / /) -> FALSE
(9) if (&User-Name =~ /@[^@]*@/ ) {
(9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(9) if (&User-Name =~ /\.\./ ) {
(9) if (&User-Name =~ /\.\./ ) -> FALSE
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(9) if (&User-Name =~ /\.$/) {
(9) if (&User-Name =~ /\.$/) -> FALSE
(9) if (&User-Name =~ /@\./) {
(9) if (&User-Name =~ /@\./) -> FALSE
(9) } # if (&User-Name) = notfound
(9) } # policy filter_username = notfound
(9) [preprocess] = ok
(9) [mschap] = noop
(9) ntdomain: Checking for prefix before "\"
(9) ntdomain: No '\' in User-Name = "aduserx", looking up realm NULL
(9) ntdomain: No such realm "NULL"
(9) [ntdomain] = noop
(9) [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "aduserx", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 9 length 46
(9) eap: Continuing tunnel setup
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/freeradius/sites-enabled/DGP
(9) authenticate {
(9) eap: Expiring EAP session with state 0x0c948df9049d944a
(9) eap: Finished EAP session with state 0x0c948df9049d944a
(9) eap: Previous EAP request found for state 0x0c948df9049d944a,
released from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established. Decoding tunneled attributes
(9) eap_peap: PEAP state send tlv success
(9) eap_peap: Received EAP-TLV response
(9) eap_peap: Success
(9) eap_peap: No information to cache: session caching will be
disabled for session
2b38a0f48cccd902c2478e14eb6a8ea7a71e062dc5ad73f4f58ab10c6fd774e1
(9) eap: Sending EAP Success (code 3) ID 9 length 4
(9) eap: Freeing handler
(9) [eap] = ok
(9) } # authenticate = ok
(9) # Executing section post-auth from file /etc/freeradius/sites-enabled/DGP
(9) post-auth {
(9) if (NAS-Port-Type == Wireless-802.11) {
(9) if (NAS-Port-Type == Wireless-802.11) -> TRUE
(9) if (NAS-Port-Type == Wireless-802.11) {
(9) if (User-Name !~ /ADLAB\\\\/i) {
(9) if (User-Name !~ /ADLAB\\\\/i) -> TRUE
(9) if (User-Name !~ /ADLAB\\\\/i) {
(9) update request {
(9) EXPAND ADLAB\\%{User-Name}
(9) --> ADLAB\\aduserx
(9) User-Name := ADLAB\aduserx
(9) } # update request = noop
(9) } # if (User-Name !~ /ADLAB\\\\/i) = noop
(9) if ((Group == "ADLAB\\\\fw-wifi-access") ) {
(9) Failed resolving GID: No error
(9) if ((Group == "ADLAB\\\\fw-wifi-access") ) -> FALSE
(9) if ((Group == "ADLAB\\fw-wifi-access") ) {
(9) if ((Group == "ADLAB\\fw-wifi-access") ) -> FALSE
(9) if ((Group == "fw-wifi-access") ) {
(9) if ((Group == "fw-wifi-access") ) -> FALSE
(9) else {
(9) update reply {
(9) EXPAND %{Stripped-User-Name}
(9) -->
(9) User-Name :=
(9) Firewall-Group-Name := "WIFI-INVALIDO"
(9) } # update reply = noop
(9) } # else = noop
(9) } # if (NAS-Port-Type == Wireless-802.11) = noop
(9) ... skipping else for request 9: Preceding "if" was taken
(9) policy remove_reply_message_if_eap {
(9) if (&reply:EAP-Message && &reply:Reply-Message) {
(9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(9) else {
(9) [noop] = noop
(9) } # else = noop
(9) } # policy remove_reply_message_if_eap = noop
(9) [exec] = noop
(9) } # post-auth = noop
(9) Sent Access-Accept Id 87 from 172.16.13.30:1812 to
172.16.250.2:1051 length 0
(9) MS-MPPE-Recv-Key =
0x5ea4ab1003841b5a54f60da514ef021057ace23855ec69f2cd350bc31bad55d8
(9) MS-MPPE-Send-Key =
0x3689fab4c80c052d54b5bade017dc795debb8bef460b19373a6609bd297d36bd
(9) EAP-Message = 0x03090004
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) User-Name := ""
(9) Firewall-Group-Name := "WIFI-INVALIDO"
(9) Finished request
Waking up in 2.3 seconds.
(0) Cleaning up request packet ID 78 with timestamp +19
(1) Cleaning up request packet ID 79 with timestamp +19
(2) Cleaning up request packet ID 80 with timestamp +20
(3) Cleaning up request packet ID 81 with timestamp +20
(4) Cleaning up request packet ID 82 with timestamp +20
(5) Cleaning up request packet ID 83 with timestamp +20
(6) Cleaning up request packet ID 84 with timestamp +20
Waking up in 2.5 seconds.
(7) Cleaning up request packet ID 85 with timestamp +20
(8) Cleaning up request packet ID 86 with timestamp +22
(9) Cleaning up request packet ID 87 with timestamp +22
[1mReady to process requests [0m
^C
]0;root at lnx1604dgpradius02:
/etc/freeradius root at lnx1604dgpradius02:/etc/freeradius#
============
winbindd -SFd5
============
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.06.08 13:04:23 =~=~=~=~=~=~=~=~=~=~=~=
[ 2976]: request interface version (version = 27)
[ 2976]: request location of privileged pipe
getgroups freerad
child daemon request 59
ads: fetch sequence_number for ADLAB
ads_do_paged_search_args: ldap_search_with_timeout((objectclass=*)) ->
Time limit exceeded
Reducing LDAP page size from 500 to 250 due to IO_TIMEOUT
Reopening ads connection to realm 'ADLAB.LOCAL' after error Time limit exceeded
sitename_fetch: Returning sitename for ADLAB.local: "ADLAB"
ads_dc_name: domain=ADLAB
sitename_fetch: Returning sitename for ADLAB.local: "ADLAB"
saf_fetch: failed to find server for "ADLAB.local" domain
get_dc_list: preferred server list: ", *"
no entry for ADLAB.local#1C found.
resolve_ads: Attempting to resolve DCs for ADLAB.local using DNS
ads_dns_lookup_srv: 2 records returned in the answer section.
namecache_store: storing 2 addresses for ADLAB.local#1c: 172.16.14.5,172.16.14.3
get_dc_list: returning 2 ip addresses in an ordered list
get_dc_list: 172.16.14.5:389 172.16.14.3:389
ads_try_connect: sending CLDAP request to 172.16.14.5 (realm: ADLAB.local)
Successfully contacted LDAP server 172.16.14.5
sitename_fetch: Returning sitename for ADLAB.local: "ADLAB"
saf_fetch: failed to find server for "ADLAB.local" domain
get_dc_list: preferred server list: ", *"
resolve_ads: Attempting to resolve KDCs for ADLAB.local using DNS
ads_dns_lookup_srv: 2 records returned in the answer section.
get_dc_list: returning 2 ip addresses in an ordered list
get_dc_list: 172.16.14.5:88 172.16.14.3:88
saf_fetch: failed to find server for "ADLAB.local" domain
get_dc_list: preferred server list: ", *"
resolve_ads: Attempting to resolve KDCs for ADLAB.local using DNS
ads_dns_lookup_srv: 3 records returned in the answer section.
get_dc_list: returning 3 ip addresses in an ordered list
get_dc_list: 172.20.0.5:88 172.16.14.3:88 172.16.14.5:88
create_local_private_krb5_conf_for_domain: wrote file
/var/run/samba/smb_krb5/krb5.conf.ADLAB with realm ADLAB.LOCAL KDC
list = kdc = 172.16.14.5
kdc = 172.16.14.3
kdc = 172.20.0.5
ads_dc_name: using server='ADLAB.LOCAL' IP=172.16.14.5
ads_try_connect: sending CLDAP request to 172.16.14.5 (realm: ADLAB.local)
Successfully contacted LDAP server 172.16.14.5
Connected to LDAP server ADLAB.LOCAL
KDC time offset is 0 seconds
Found SASL mechanism GSS-SPNEGO
ads_sasl_spnego_bind: got OID=1.2.840.48018.1.2.2
ads_sasl_spnego_bind: got OID=1.2.840.113554.1.2.2
ads_sasl_spnego_bind: got OID=1.2.840.113554.1.2.2.3
ads_sasl_spnego_bind: got OID=1.3.6.1.4.1.311.2.2.10
Starting GENSEC mechanism spnego
Starting GENSEC submechanism gse_krb5
Search for filter: (objectclass=*), base: gave 1 replies
msrpc_name_to_sid: name=ADLAB\FREERAD
name_to_sid [rpc] ADLAB\FREERAD for domain ADLAB
rpc_api_pipe: host ADLAB.LOCAL
rpc_write_send: data_to_write: 160
rpc_read_send: data_to_read: 176
Finished processing child request 59
Could not convert sid S-0-0: NT_STATUS_NONE_MAPPED
#### Freeradiux - X was already called, now a user will try to log on via WIFI
[ 2976]: request interface version (version = 27)
[ 2976]: request location of privileged pipe
[ 2976]: pam auth crap domain: [ADLAB] user: aduserx
child daemon request 14
[ 2931]: pam auth crap domain: ADLAB user: aduserx
rpc_api_pipe: host ADLAB.LOCAL
rpc_write_send: data_to_write: 400
rpc_read_send: data_to_read: 656
NTLM CRAP authentication for user [ADLAB]\[aduserx] returned NT_STATUS_OK
Finished processing child request 14
getpwnam ADLAB\aduserx
child daemon request 59
msrpc_name_to_sid: name=ADLAB\aduserx
name_to_sid [rpc] ADLAB\aduserx for domain ADLAB
rpc_api_pipe: host ADLAB.LOCAL
rpc_write_send: data_to_write: 160
rpc_read_send: data_to_read: 208
Finished processing child request 59
child daemon request 59
ads: query_user
query_user: Cache lookup succeeded for
S-1-5-21-297524306-2253920702-176340032-2428
Finished processing child request 59
child daemon request 59
rpc_api_pipe: host ADLAB.LOCAL
rpc_write_send: data_to_write: 144
rpc_read_send: data_to_read: 208
Finished processing child request 59
child daemon request 59
Finished processing child request 59
child daemon request 59
msrpc_sid_to_name: S-1-5-21-297524306-2253920702-176340032-513 for domain ADLAB
rpc_api_pipe: host ADLAB.LOCAL
rpc_write_send: data_to_write: 144
rpc_read_send: data_to_read: 224
Mapped sid to [ADLAB]\[Domain Users]
Finished processing child request 59
child daemon request 59
rpc_api_pipe: host ADLAB.LOCAL
rpc_write_send: data_to_write: 144
rpc_read_send: data_to_read: 224
Finished processing child request 59
child daemon request 59
Finished processing child request 59
getgrnam ADLAB\\fw-wifi-access
child daemon request 59
msrpc_name_to_sid: name=ADLAB\\FW-WIFI-ACCESS
name_to_sid [rpc] ADLAB\\FW-WIFI-ACCESS for domain ADLAB
rpc_api_pipe: host ADLAB.LOCAL
rpc_write_send: data_to_write: 176
rpc_read_send: data_to_read: 176
Finished processing child request 59
Could not convert sid S-0-0: NT_STATUS_NONE_MAPPED
getpwnam ADLAB\aduserx
getgrnam ADLAB\fw-wifi-access
child daemon request 59
msrpc_name_to_sid: name=ADLAB\FW-WIFI-ACCESS
name_to_sid [rpc] ADLAB\FW-WIFI-ACCESS for domain ADLAB
rpc_api_pipe: host ADLAB.LOCAL
rpc_write_send: data_to_write: 176
rpc_read_send: data_to_read: 208
Finished processing child request 59
child daemon request 59
Finished processing child request 59
child daemon request 59
rpc_api_pipe: host ADLAB.LOCAL
rpc_write_send: data_to_write: 144
rpc_read_send: data_to_read: 224
Finished processing child request 59
child daemon request 59
Finished processing child request 59
getpwnam ADLAB\aduserx
getgrnam fw-wifi-access
^CGot sig[2] terminate (is_parent=0)
Got sig[2] terminate (is_parent=0)
Got sig[2] terminate (is_parent=0)
Got sig[2] terminate (is_parent=0)
Got sig[2] terminate (is_parent=1)
check lock order 2 for /var/run/samba/serverid.tdb
release lock order 2 for /var/run/samba/serverid.tdb
]0;root at lnx1604dgpradius02: /home/ADLAB root at lnx1604dgpradius02:/home/ADLAB#
============
More information about the Freeradius-Users
mailing list