Old Users File won't Load on 3.x

[Norman Zhang]

On Wed, May 18, 2016 at 7:54 PM, Alan DeKok <aland at deployingradius.com>
wrote:

>
> > Does this mean Auth-Type = System is no longer supported? Below is the
> > complete USERS file.
>
>   You don't need to specify it.
>

Thanks. I have gone through README.rst, and update USERS, but still getting
error. I guess the "" still causing issues. I read through radius.conf, but
don't see any reference on \". Any idea?

DEFAULT Group == users-ro
        Service-Type = NAS-Prompt-User,
        cisco-avpair := "shell:priv-lvl=7"

DEFAULT Group == users-rw
        Service-Type = NAS-Prompt-User,
        cisco-avpair := "shell:roles*\"network-admin vdc-admin\"",
        cisco-avpair += "shell:priv-lvl=15"

DEFAULT Group == usersb-ro
        Service-Type = NAS-Prompt-User,
        cisco-avpair := "shell:roles=usersb"

May 19 11:55:49 SERVER radiusd[10797]:
/etc/raddb/mods-config/files/authorize[20]: Parse error (reply) for entry
DEFAULT: Expected end of line or comma
May 19 11:55:49 SERVER radiusd[10797]: Failed reading
/etc/raddb/mods-config/files/authorize

Thanks,
Norman