VLAN Post Auth

Richard Laing richard.laing at armourcomms.com
Wed Apr 19 12:44:37 CEST 2017


Hi there I am looking for help with setting up post authentication VLAN's with LDAP groups enabled, at present I have made a test environment and I attempting to have the groups from the LDAP server act as the determine factor in which VLAN is assigned.

I have the connection to the LDAP server working and I can look up users inside the schema and them authenticated correctly at present, however once I try to place multiple VLAN's into the users file I am unable to have the post auth work, please note I while the name has Skype in the title there are no MS products involved just reusing my pfsense lab box that was setup for a previous test with Skype, also the LDAP server is current version of FreeIPA in the CentOS repos.

If you require any more information please let me know and I will respond appropriately, thank you for your time.

/etc/raddb/users

DEFAULT Ldap-Group == "cn=freeradius,cn=groups,cn=accounts,dc=acskpye,dc=com"
        Tunnel-Type = VLAN,
        Tunnel-Medium-Type = "IEEE-802",
        Tunnel-Private-Group-Id = "11"

DEFAULT Ldap-Group == "cn=ops,cn=groups,cn=accounts,dc=acskype,dc=com"
        Tunnel-Type = VLAN,
        Tunnel-Medium-Type = "IEEE-802",
        Tunnel-Private-Group-Id = "12"

DEFAULT Auth-Type := Reject


FreeRADIUS Version 3.0.4 installed onto CentOS 7



Radius Out Log

[root at ipa01 ~]# radiusd -xx -l stdout -f
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Jan 17 2017 at 18:49:55
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/ldap
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
     user = "radiusd"
     group = "radiusd"
     allow_core_dumps = no
 }
}
main {
    name = "radiusd"
    prefix = "/usr"
    localstatedir = "/var"
    sbindir = "/usr/sbin"
    logdir = "/var/log/radius"
    run_dir = "/var/run/radiusd"
    libdir = "/usr/lib64/freeradius"
    radacctdir = "/var/log/radius/radacct"
    hostname_lookups = no
    max_request_time = 30
    cleanup_delay = 5
    max_requests = 1024
    pidfile = "/var/run/radiusd/radiusd.pid"
    checkrad = "/usr/sbin/checkrad"
    debug_level = 0
    proxy_requests = yes
 log {
     stripped_names = no
     auth = no
     auth_badpass = no
     auth_goodpass = no
     colourise = yes
     msg_denied = "You are already logged in - access denied"
 }
 security {
     max_attributes = 200
     reject_delay = 1
     status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
     retry_delay = 5
     retry_count = 3
     default_fallback = no
     dead_time = 120
     wake_all_if_all_dead = no
 }
 home_server localhost {
     ipaddr = 127.0.0.1
     port = 1812
     type = "auth"
     secret = <<< secret >>>
     response_window = 20.000000
     response_timeouts = 1
     max_outstanding = 65536
     zombie_period = 40
     status_check = "status-server"
     ping_interval = 30
     check_interval = 30
     check_timeout = 4
     num_answers_to_alive = 3
     revive_interval = 120
  coa {
      irt = 2
      mrt = 16
      mrc = 5
      mrd = 30
  }
  limit {
      max_connections = 16
      max_requests = 0
      lifetime = 0
      idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
    type = fail-over
    home_server = localhost
 }
 realm example.com {
    auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
     ipaddr = 127.0.0.1
     require_message_authenticator = no
     secret = <<< secret >>>
     nas_type = "other"
     proto = "*"
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
 client localhost_ipv6 {
     ipv6addr = ::1
     require_message_authenticator = no
     secret = <<< secret >>>
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
 client localnet {
     ipaddr = 192.168.10.0/24
     require_message_authenticator = no
     secret = <<< secret >>>
     nas_type = "other<----->#"
     proto = "*"
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_always
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
      rcode = "reject"
      simulcount = 0
      mpp = no
  }
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
      rcode = "fail"
      simulcount = 0
      mpp = no
  }
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
      rcode = "ok"
      simulcount = 0
      mpp = no
  }
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
      rcode = "handled"
      simulcount = 0
      mpp = no
  }
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
      rcode = "invalid"
      simulcount = 0
      mpp = no
  }
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
      rcode = "userlock"
      simulcount = 0
      mpp = no
  }
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
      rcode = "notfound"
      simulcount = 0
      mpp = no
  }
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
      rcode = "noop"
      simulcount = 0
      mpp = no
  }
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
      rcode = "updated"
      simulcount = 0
      mpp = no
  }
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
      filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
      key = "%{Realm}"
      relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
      filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
      key = "%{Realm}"
      relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
      filename = "/etc/raddb/mods-config/attr_filter/access_reject"
      key = "%{User-Name}"
      relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
      filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
      key = "%{User-Name}"
      relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
      filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
      key = "%{User-Name}"
      relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
      key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
      ttl = 15
      max_entries = 16384
      epoch = 0
      add_stats = no
  }
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_detail
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
      filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      log_packet_header = no
  }
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
      filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
      filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
      filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
      filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
      default_eap_type = "md5"
      timer_expire = 60
      ignore_unknown_eap_types = no
      mod_accounting_username_bug = no
      max_sessions = 1024
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
       challenge = "Password: "
       auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
   }
debug: 'tls' option missing, trying to use legacy configuration
   tls {
       rsa_key_exchange = no
       dh_key_exchange = yes
       rsa_key_length = 512
       dh_key_length = 512
       verify_depth = 0
       ca_path = "/etc/raddb/certs"
       pem_file_type = yes
       private_key_file = "/etc/raddb/certs/server.key"
       certificate_file = "/etc/raddb/certs/server.pem"
       ca_file = "/etc/raddb/certs/ca.pem"
       private_key_password = <<< secret >>>
       dh_file = "/etc/raddb/certs/dh"
       random_file = "/dev/urandom"
       fragment_size = 1024
       include_length = yes
       check_crl = no
       cipher_list = "DEFAULT"
       ecdh_curve = "prime256v1"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"<http://127.0.0.1/ocsp/>
        use_nonce = yes
        timeout = 0
        softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
       default_eap_type = "md5"
       copy_request_to_tunnel = no
       use_tunneled_reply = yes
       virtual_server = "inner-tunnel"
       include_length = yes
       require_client_cert = no
   }
debug: 'tls' option missing, trying to use legacy configuration
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
       default_method = "mschapv2"
       copy_request_to_tunnel = no
       use_tunneled_reply = yes
       proxy_tunneled_request_as_eap = yes
       virtual_server = "inner-tunnel"
       soh = no
       require_client_cert = no
   }
debug: 'tls' option missing, trying to use legacy configuration
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
       with_ntdomain_hack = no
       send_error = no
   }
  # Loaded module rlm_exec
  # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
      wait = yes
      program = "/bin/echo %{User-Name}"
      input_pairs = "request"
      output_pairs = "reply"
      shell_escape = yes
  }
  # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
      wait = no
      input_pairs = "request"
      shell_escape = yes
      timeout = 10
  }
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
      safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
  files {
      filename = "/etc/raddb/mods-config/files/authorize"
      usersfile = "/etc/raddb/mods-config/files/authorize"
      acctusersfile = "/etc/raddb/mods-config/files/accounting"
      preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
      compat = "cistron"
  }
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:246 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:251 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:256 Cistron compatibility checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:246 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:251 Cistron compatibility checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:256 Cistron compatibility checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
      filename = "/var/log/radius/linelog"
      permissions = 384
      format = "This is a log message for %{User-Name}"
      reference = "messages.%{%{Packet-Type}:-default}"
  }
  # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  linelog log_accounting {
      filename = "/var/log/radius/linelog-accounting"
      permissions = 384
      format = ""
      reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
      minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
      use_mppe = yes
      require_encryption = no
      require_strong = no
      with_ntdomain_hack = yes
   passchange {
   }
      allow_retry = yes
  }
  # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
      wait = yes
      program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
      shell_escape = yes
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
      normalise = yes
  }
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
      filename = "/etc/passwd"
      format = "*User-Name:Crypt-Password:"
      delimiter = ":"
      ignore_nislike = no
      ignore_empty = yes
      allow_multiple_keys = no
      hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
  preprocess {
      huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
      hints = "/etc/raddb/mods-config/preprocess/hints"
      with_ascend_hack = no
      ascend_channels_per_line = 23
      with_ntdomain_hack = no
      with_specialix_jetstream_hack = no
      with_cisco_vsa_hack = no
      with_alvarion_vsa_hack = no
  }
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Loaded module rlm_radutmp
  # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
      filename = "/var/log/radius/radutmp"
      username = "%{User-Name}"
      case_sensitive = yes
      check_with_nas = yes
      permissions = 384
      caller_id = yes
  }
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
      format = "prefix"
      delimiter = "/"
      ignore_default = no
      ignore_null = no
  }
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
      format = "suffix"
      delimiter = "@"
      ignore_default = no
      ignore_null = no
  }
  # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
      format = "suffix"
      delimiter = "%"
      ignore_default = no
      ignore_null = no
  }
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
      format = "prefix"
      delimiter = "\"
      ignore_default = no
      ignore_null = no
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
      dhcp = yes
  }
  # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
      filename = "/var/log/radius/sradutmp"
      username = "%{User-Name}"
      case_sensitive = yes
      check_with_nas = yes
      permissions = 420
      caller_id = no
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
      radwtmp = "/var/log/radius/radwtmp"
  }
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_ldap
  # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
  ldap {
      server = "ipa01.acskype.com"
      port = 389
      password = <<< secret >>>
      identity = ""
   user {
       filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
       scope = "sub"
       base_dn = "dc=acskype,dc=com"
       access_positive = yes
   }
   group {
       filter = "(objectClass=posixGroup)"
       scope = "sub"
       base_dn = "dc=acskype,dc=com"
       name_attribute = "cn"
       membership_attribute = "memberOf"
       cacheable_name = no
       cacheable_dn = no
   }
   client {
       filter = "(objectClass=frClient)"
       scope = "sub"
       base_dn = "dc=acskype,dc=com"
    attribute {
        identifier = "radiusClientIdentifier"
        shortname = "cn"
        secret = "radiusClientSecret"
    }
   }
   profile {
       filter = "(&)"
   }
   options {
       ldap_debug = 40
       chase_referrals = yes
       rebind = yes
       net_timeout = 1
       res_timeout = 20
       srv_timelimit = 20
       idle = 60
       probes = 3
       interval = 3
   }
   tls {
       start_tls = no
   }
  }
rlm_ldap: Falling back to build time libldap version info.  Query for LDAP_OPT_API_INFO returned: -1
rlm_ldap: libldap vendor: OpenLDAP version: 20440
   accounting {
       reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
       reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
       start = 5
       min = 4
       max = 32
       spare = 3
       uses = 0
       lifetime = 0
       cleanup_interval = 30
       idle_timeout = 60
       retry_delay = 1
       spread = no
   }
rlm_ldap (ldap): Opening additional connection (0)
rlm_ldap (ldap): Connecting to ipa01.acskype.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1)
rlm_ldap (ldap): Connecting to ipa01.acskype.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2)
rlm_ldap (ldap): Connecting to ipa01.acskype.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3)
rlm_ldap (ldap): Connecting to ipa01.acskype.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4)
rlm_ldap (ldap): Connecting to ipa01.acskype.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Creating Auth-Type = digest
 # Creating Auth-Type = LDAP
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
 thread pool {
     start_servers = 5
     max_servers = 32
     min_spare_servers = 3
     max_spare_servers = 10
     max_requests_per_server = 0
     cleanup_delay = 5
     max_queue_size = 65536
     auto_limit_acct = no
 }
Thread spawned new child 1. Total threads in pool: 1
Thread spawned new child 2. Total threads in pool: 2
Thread spawned new child 3. Total threads in pool: 3
Thread spawned new child 4. Total threads in pool: 4
Thread 1 waiting to be assigned a request
Thread 3 waiting to be assigned a request
Thread 2 waiting to be assigned a request
Thread spawned new child 5. Total threads in pool: 5
Thread pool initialized
radiusd: #### Opening IP addresses and Ports ####
Thread 4 waiting to be assigned a request
Thread 5 waiting to be assigned a request
listen {
      type = "auth"
      ipaddr = *
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "acct"
      ipaddr = *
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "auth"
      ipv6addr = ::
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "acct"
      ipv6addr = ::
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "auth"
      ipaddr = 127.0.0.1
      port = 18120
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address :: port 1812 as server default
Listening on acct address :: port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 52920
Ready to process requests
Received Access-Request Id 114 from 192.168.10.8:53461 to 192.168.10.2:1812 length 78
Threads: total/active/spare threads = 5/0/5
Waking up in 0.3 seconds.
Thread 3 got semaphore
Thread 3 handling request 0, (1 handled so far)
    User-Name = 'richardl'
    User-Password = 'Testing 101'
    NAS-IP-Address = 192.168.10.8
    NAS-Port = 0
    Message-Authenticator = 0x8b3000126683364c527c89ed50794a37
(0) Received Access-Request packet from host 192.168.10.8 port 53461, id=114, length=78
(0)     User-Name = 'richardl'
(0)     User-Password = 'Testing 101'
(0)     NAS-IP-Address = 192.168.10.8
(0)     NAS-Port = 0
(0)     Message-Authenticator = 0x8b3000126683364c527c89ed50794a37
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)   filter_username filter_username {
(0)     if (!&User-Name)
(0)     if (!&User-Name)  -> FALSE
(0)     if (&User-Name =~ / /)
(0)     if (&User-Name =~ / /)  -> FALSE
(0)     if (&User-Name =~ /@.*@/ )
(0)     if (&User-Name =~ /@.*@/ )  -> FALSE
(0)     if (&User-Name =~ /\\.\\./ )
(0)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(0)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(0)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(0)     if (&User-Name =~ /\\.$/)
(0)     if (&User-Name =~ /\\.$/)   -> FALSE
(0)     if (&User-Name =~ /@\\./)
(0)     if (&User-Name =~ /@\\./)   -> FALSE
(0)   } # filter_username filter_username = notfound
(0)   [preprocess] = ok
(0)  suffix : Checking for suffix after "@"
(0)  suffix : No '@' in User-Name = "richardl", looking up realm NULL
(0)  suffix : No such realm "NULL"
(0)   [suffix] = noop
(0)  eap : No EAP-Message, not doing EAP
(0)   [eap] = noop
(0)  files : Searching for user in group "cn=freeradius,cn=groups,cn=accounts,dc=acskpye,dc=com"
rlm_ldap (ldap): Reserved connection (4)
(0)  files : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(0)  files :    --> (uid=richardl)
(0)  files : EXPAND dc=acskype,dc=com
(0)  files :    --> dc=acskype,dc=com
(0)  files : Performing search in 'dc=acskype,dc=com' with filter '(uid=richardl)', scope 'sub'
(0)  files : Waiting for search result...
(0)  files : User object found at DN "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com"
(0)  files : Checking user object membership (memberOf) attributes
(0)  files : Performing unfiltered search in 'uid=richardl,cn=users,cn=compat,dc=acskype,dc=com', scope 'base'
(0)  files : Waiting for search result...
(0)  files : No group membership attribute(s) found in user object
rlm_ldap (ldap): Released connection (4)
rlm_ldap (ldap): Closing connection (0), from 1 unused connections
(0)  files : User is not a member of specified group
(0)  files : Searching for user in group "cn=ops,cn=groups,cn=accounts,dc=acskype,dc=com"
rlm_ldap (ldap): Reserved connection (4)
(0)  files : Using user DN from request "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com"
(0)  files : Checking user object membership (memberOf) attributes
(0)  files : Performing unfiltered search in 'uid=richardl,cn=users,cn=compat,dc=acskype,dc=com', scope 'base'
(0)  files : Waiting for search result...
(0)  files : No group membership attribute(s) found in user object
rlm_ldap (ldap): Released connection (4)
(0)  files : User is not a member of specified group
(0)  files : users: Matched entry DEFAULT at line 256
(0)   [files] = ok
rlm_ldap (ldap): Reserved connection (4)
(0)  ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(0)  ldap :    --> (uid=richardl)
(0)  ldap : EXPAND dc=acskype,dc=com
(0)  ldap :    --> dc=acskype,dc=com
(0)  ldap : Performing search in 'dc=acskype,dc=com' with filter '(uid=richardl)', scope 'sub'
(0)  ldap : Waiting for search result...
(0)  ldap : User object found at DN "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com"
(0)  ldap : Processing user attributes
(0)  WARNING: ldap : No "known good" password added. Ensure the admin user has permission to read the password attribute
(0)  WARNING: ldap : PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (4)
(0)   [ldap] = ok
(0)    if ((ok || updated) && User-Password)
(0)    if ((ok || updated) && User-Password)  -> TRUE
(0)   if ((ok || updated) && User-Password)  {
(0)    update  {
(0)     control:Auth-Type := LDAP
(0)    } # update  = noop
(0)   } # if ((ok || updated) && User-Password)  = noop
(0)   [expiration] = noop
(0)   [logintime] = noop
(0)  WARNING: pap : No "known good" password found for the user.  Not setting Auth-Type
(0)  WARNING: pap : Authentication will fail unless a "known good" password is available
(0)   [pap] = noop
(0)  } #  authorize = ok
(0) Found Auth-Type = LDAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)  Auth-Type LDAP {
(0)  ldap : Login attempt by "richardl"
rlm_ldap (ldap): Reserved connection (4)
(0)  ldap : Using user DN from request "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com"
(0)  ldap : Waiting for bind result...
(0)  ldap : Bind successful
(0)  ldap : Bind as user "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com" was successful
rlm_ldap (ldap): Released connection (4)
(0)   [ldap] = ok
(0)  } # Auth-Type LDAP = ok
(0) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(0)   post-auth {
(0)   [exec] = noop
(0)   remove_reply_message_if_eap remove_reply_message_if_eap {
(0)     if (&reply:EAP-Message && &reply:Reply-Message)
(0)     if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)    else else {
(0)     [noop] = noop
(0)    } # else else = noop
(0)   } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(0)  } #  post-auth = noop
(0) Sending Access-Accept packet to host 192.168.10.8 port 53461, id=114, length=0
Sending Access-Accept Id 114 from 192.168.10.2:1812 to 192.168.10.8:53461
(0) Finished request
Thread 3 waiting to be assigned a request
Waking up in 4.6 seconds.



More information about the Freeradius-Users mailing list