Fresh installed Windows 10 Pro machine refuses to connect.

Selahattin Cilek selahattin_cilek at hotmail.com
Sun Aug 6 14:07:29 CEST 2017


I have been experimenting with with FreeRADIUS v3.0.5 for a while. My server reads all its data from a MySQL database using customs stored procedures that actually do the same work as default queries that come with FreeRADIUS. I can successfully connect to my experimental network using my iPhone 5SE but a Windows 10 Pro machine does not. Could you please help me?

# radiusd -X
FreeRADIUS Version 3.0.15
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/date
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/dhcp
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/motp
including configuration file /usr/local/etc/raddb/mods-enabled/googleauth
including configuration file /usr/local/etc/raddb/mods-enabled/datacounter_acct
including configuration file /usr/local/etc/raddb/mods-enabled/sql
including configuration file /usr/local/etc/raddb/mods-config/sql/main/mysql/queries.conf
including configuration file /usr/local/etc/raddb/mods-enabled/sqlcounter
including configuration file /usr/local/etc/raddb/mods-config/sql/counter/mysql/dailycounter.conf
including configuration file /usr/local/etc/raddb/mods-config/sql/counter/mysql/monthlycounter.conf
including configuration file /usr/local/etc/raddb/mods-config/sql/counter/mysql/noresetcounter.conf
including configuration file /usr/local/etc/raddb/mods-config/sql/counter/mysql/expire_on_login.conf
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including configuration file /usr/local/etc/raddb/policy.d/pfs_custom_policies
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-ttls
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peap
main {
 security {
        allow_core_dumps = no
 }
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/var"
        logdir = "/var/log"
        run_dir = "/var/run"
}
main {
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/var"
        sbindir = "/usr/local/sbin"
        logdir = "/var/log"
        run_dir = "/var/run"
        libdir = "/usr/local/lib/freeradius-3.0.15"
        radacctdir = "/var/log/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 36864
        pidfile = "/var/run/radiusd.pid"
        checkrad = "/usr/local/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = yes
        auth_badpass = no
        auth_goodpass = no
        msg_badpass = ""
        msg_goodpass = ""
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 3.000000
        status_server = no
        allow_vulnerable_openssl = "yes"
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
 client pfsense {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "pfsense"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = pap
 # Creating Auth-Type = eap
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
  date {
        format = "%b %e %Y %H:%M:%S %Z"
        utc = no
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  detail {
        filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail_%Y_%m_%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail auth_log {
        filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail reply_log {
        filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
  eap {
        default_eap_type = "ttls"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 4096
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôSùûüa ÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔRÙÛÜx"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
  files {
        filename = "/usr/local/etc/raddb/mods-config/files/authorize"
        acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog {
        filename = "/var/log/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
        hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = yes
  }
  # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = yes
  }
  # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = yes
  }
  # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\"
        ignore_default = no
        ignore_null = yes
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
  unix {
        radwtmp = "/var/log/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
  # Loading module "motp" from file /usr/local/etc/raddb/mods-enabled/motp
  exec motp {
        wait = yes
        program = "/usr/local/bin/bash /usr/local/etc/raddb/scripts/otpverify.sh %{request:User-Name} %{request:User-Password} %{reply:MOTP-Init-Secret} %{reply:MOTP-PIN} %{
reply:MOTP-Offset}"
        shell_escape = yes
  }
  # Loading module "googleauth" from file /usr/local/etc/raddb/mods-enabled/googleauth
  exec googleauth {
        wait = yes
        program = "/usr/local/etc/raddb/scripts/googleauth.py %{request:User-Name} %{reply:MOTP-Init-Secret} %{reply:MOTP-PIN} %{request:User-Password}"
        shell_escape = yes
  }
  # Loading module "check_quota" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct
  exec check_quota {
        wait = no
        program = "/usr/local/bin/bash /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} %{request:Calling-Station-Id} %{request:NAS-IP-Address} %{reques
t:Class} %{request:Acct-Status-Type}"
        shell_escape = yes
  }
  # Loaded module rlm_sql
  # Loading module "sql1" from file /usr/local/etc/raddb/mods-enabled/sql
  sql sql1 {
        driver = "rlm_sql_mysql"
        server = "localhost"
        port = 33316
        login = "raduser"
        password = <<< secret >>>
        radius_db = "raddb3"
        read_groups = yes
        read_profiles = yes
        read_clients = yes
        delete_stale_sessions = yes
        sql_user_name = "%{User-Name}"
        logfile = "/var/log/sqltrace.sql"
        default_user_profile = ""
        client_query = "CALL load_clients()"
        authorize_check_query = "CALL authorize_check('%{SQL-User-Name}')"
        authorize_reply_query = "CALL authorize_reply('%{SQL-User-Name}')"
        authorize_group_check_query = "CALL authorize_group_check('%{sql1-SQL-Group}')"
        authorize_group_reply_query = "CALL authorize_group_reply('%{sql1-SQL-Group}')"
        group_membership_query = "CALL group_membership('%{SQL-User-Name}')"
        simul_count_query = "CALL simul_count('%{SQL-User-Name}')"
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_"
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}.query}"
    type {
     accounting-on {
        query = "CALL accounting_on('%{Called-Station-Id}')"
     }
     accounting-off {
        query = "CALL accounting_off('%{Called-Station-Id}')"
     }
     start {
        query = "CALL accounting_start('%{Acct-Session-Id}','%{SQL-User-Name}','%{Class}','%{NAS-IP-Address}','%{Called-Station-Id}','%{Calling-Station-Id}')"
     }
     interim-update {
        query = "CALL accounting_update ('%{Acct-Session-Id}','%{Called-Station-Id}','%{Calling-Station-Id}','%{Acct-Session-Time}','%{Acct-Input-Octets}','%{Acct-Input-Giga
words}','%{Acct-Output-Octets}','%{Acct-Output-Gigawords}')"
     }
     stop {
        query = "CALL accounting_stop ('%{Acct-Session-Id}','%{SQL-User-Name}','%{Called-Station-Id}','%{Calling-Station-Id}','%{Acct-Session-Time}','%{Acct-Input-Octets}','
%{Acct-Input-Gigawords}','%{Acct-Output-Octets}','%{Acct-Output-Gigawords}','%{Acct-Terminate-Cause}')"
     }
    }
   }
   post-auth {
        reference = ".query"
   }
  }
rlm_sql (sql1): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute sql1-SQL-Group
  # Loaded module rlm_sqlcounter
  # Loading module "dailycounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounter
  sqlcounter dailycounter {
        sql_module_instance = "sql"
        key = "User-Name"
        query = "SELECT SUM(acctsessiontime - GREATEST((%%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username = '%{User-Name}' AND UNIX_TIMESTAMP(acctstartti
me) + acctsessiontime > '%%b'"
        reset = "daily"
        counter_name = "Daily-Session-Time"
        check_name = "Max-Daily-Session"
        reply_name = "Session-Timeout"
  }
  # Loading module "monthlycounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounter
  sqlcounter monthlycounter {
        sql_module_instance = "sql"
        key = "User-Name"
        query = "SELECT SUM(acctsessiontime - GREATEST((%%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username='%{User-Name}' AND UNIX_TIMESTAMP(acctstarttime
) + acctsessiontime > '%%b'"
        reset = "monthly"
        counter_name = "Monthly-Session-Time"
        check_name = "Max-Monthly-Session"
        reply_name = "Session-Timeout"
  }
  # Loading module "noresetcounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounter
  sqlcounter noresetcounter {
        sql_module_instance = "sql"
        key = "User-Name"
        query = "SELECT IFNULL(SUM(AcctSessionTime),0) FROM radacct WHERE UserName='%{User-Name}'"
        reset = "never"
        counter_name = "Max-All-Session-Time"
        check_name = "Max-All-Session"
        reply_name = "Session-Timeout"
  }
  # Loading module "expire_on_login" from file /usr/local/etc/raddb/mods-enabled/sqlcounter
  sqlcounter expire_on_login {
        sql_module_instance = "sql"
        key = "User-Name"
        query = "SELECT IFNULL( MAX(TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime))),0) FROM radacct WHERE UserName='%{User-Name}' ORDER BY acctstarttime LIMIT 1;"
        reset = "never"
        counter_name = "Expire-After-Initial-Login"
        check_name = "Expire-After"
        reply_name = "Session-Timeout"
  }
  instantiate {
  # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  # Instantiating module "sql1" from file /usr/local/etc/raddb/mods-enabled/sql
rlm_sql_mysql: libmysql version: 5.6.35
   mysql {
    tls {
    }
        warnings = "auto"
   }
rlm_sql (sql1): Attempting to connect to database "raddb3"
rlm_sql (sql1): Initialising connection pool
   pool {
        start = 32
        min = 16
        max = 16
        spare = 32
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 60
        spread = no
   }
WARNING: Ignoring "start = 32", forcing to "start = 16"
WARNING: Ignoring "spare = 32", forcing to "spare = 0"
rlm_sql (sql1): Opening additional connection (0), 1 of 16 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (1), 1 of 15 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (2), 1 of 14 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (3), 1 of 13 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (4), 1 of 12 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (5), 1 of 11 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (6), 1 of 10 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (7), 1 of 9 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (8), 1 of 8 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (9), 1 of 7 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (10), 1 of 6 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (11), 1 of 5 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (12), 1 of 4 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (13), 1 of 3 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (14), 1 of 2 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Opening additional connection (15), 1 of 1 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb3' on Localhost via UNIX socket, server version 5.6.34, protocol version 10
rlm_sql (sql1): Processing generate_sql_clients
rlm_sql (sql1) in generate_sql_clients: query is CALL load_clients()
rlm_sql (sql1): Reserved connection (0)
rlm_sql (sql1): Executing select query: CALL load_clients()
rlm_sql (sql1): Adding client 192.168.0.4 (HOME_AP) to global clients list
rlm_sql (192.168.0.4): Client "HOME_AP" (sql1) added
rlm_sql (sql1): Released connection (0)
  }
  # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"  found in filter list for realm "DEFAULT".
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec"     found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/usr/local/etc/raddb/certs"
        pem_file_type = yes
        private_key_file = "/usr/local/etc/raddb/certs/server_key.pem"
        certificate_file = "/usr/local/etc/raddb/certs/server_cert.pem"
        ca_file = "/usr/local/etc/raddb/certs/ca_cert.pem"
        dh_file = "/usr/local/etc/raddb/certs/dh"
        random_file = "/dev/urandom"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        ecdh_curve = "prime256v1"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = no
        url = "http://127.0.0.1/ocsp/"<http://127.0.0.1/ocsp/>
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "tls"
        copy_request_to_tunnel = yes
        use_tunneled_reply = no
        virtual_server = "inner-tunnel-ttls"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "tls"
        copy_request_to_tunnel = yes
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel-peap"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "dailycounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounter
rlm_sqlcounter: Current Time: 1502020694 [2017-08-06 14:58:14], Prev reset 1501966800 [2017-08-06 00:00:00]
  # Instantiating module "monthlycounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounter
rlm_sqlcounter: Current Time: 1502020694 [2017-08-06 14:58:14], Prev reset 1501534800 [2017-08-01 00:00:00]
  # Instantiating module "noresetcounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounter
rlm_sqlcounter: Current Time: 1502020694 [2017-08-06 14:58:14], Prev reset 0 [2017-08-06 14:00:00]
  # Instantiating module "expire_on_login" from file /usr/local/etc/raddb/mods-enabled/sqlcounter
rlm_sqlcounter: Current Time: 1502020694 [2017-08-06 14:58:14], Prev reset 0 [2017-08-06 14:00:00]
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel-ttls { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-ttls
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
} # server inner-tunnel-ttls
server inner-tunnel-peap { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peap
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
} # server inner-tunnel-peap
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = 192.168.0.1
        port = 1812
}
listen {
        type = "acct"
        ipaddr = 192.168.0.1
        port = 1813
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18127
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18128
}
Listening on auth address 192.168.0.1 port 1812 bound to server default
Listening on acct address 192.168.0.1 port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18127 bound to server inner-tunnel-ttls
Listening on auth address 127.0.0.1 port 18128 bound to server inner-tunnel-peap
Ready to process requests
(0) Received Access-Request Id 168 from 192.168.0.4:57972 to 192.168.0.1:1812 length 163
(0)   User-Name = "scilek"
(0)   NAS-Identifier = "802aa8ac1ef9"
(0)   NAS-Port = 0
(0)   Called-Station-Id = "80-2A-A8-AD-1E-F9:SCILEK.NET"
(0)   Calling-Station-Id = "00-22-FA-F5-B9-0A"
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Connect-Info = "CONNECT 0Mbps 802.11b"
(0)   EAP-Message = 0x02a2000b017363696c656b
(0)   Message-Authenticator = 0x47d9cb95c40fabef2cb7f53267504cf9
(0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     [preprocess] = ok
(0)     redundant sql {
(0) sql1: EXPAND %{User-Name}
(0) sql1:    --> scilek
(0) sql1: SQL-User-Name set to 'scilek'
rlm_sql (sql1): Reserved connection (1)
(0) sql1: EXPAND CALL authorize_check('%{SQL-User-Name}')
(0) sql1:    --> CALL authorize_check('scilek')
(0) sql1: Executing select query: CALL authorize_check('scilek')
(0) sql1: User found in radcheck table
(0) sql1: Conditional check items matched, merging assignment check items
(0) sql1:   Cleartext-Password := "0000"
(0) sql1:   Simultaneous-Use := 1
(0) sql1: EXPAND CALL authorize_reply('%{SQL-User-Name}')
(0) sql1:    --> CALL authorize_reply('scilek')
(0) sql1: Executing select query: CALL authorize_reply('scilek')
(0) sql1: User found in radreply table, merging reply items
(0) sql1:   Class := 0x7363696c656b
(0) sql1:   Idle-Timeout := 120
(0) sql1:   Acct-Interim-Interval := 600
(0) sql1:   Exec-Program-Wait = "/usr/local/bin/bash /usr/local/etc/raddb/scripts/datacounter_auth.sh scilek"
(0) sql1: EXPAND CALL group_membership('%{SQL-User-Name}')
(0) sql1:    --> CALL group_membership('scilek')
(0) sql1: Executing select query: CALL group_membership('scilek')
(0) sql1: User not found in any groups
rlm_sql (sql1): Released connection (1)
(0)       [sql1] = ok
(0)     } # redundant sql = ok
(0) pap: No User-Password attribute in the request.  Cannot do PAP
(0)     [pap] = noop
(0) eap: Peer sent EAP Response (code 2) ID 162 length 11
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: Initiating new EAP-TLS session
(0) eap_ttls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 163 length 6
(0) eap: EAP session adding &reply:State = 0xe897771ce8346270
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found.  Ignoring.
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0) Sent Access-Challenge Id 168 from 192.168.0.1:1812 to 192.168.0.4:57972 length 0
(0)   Class = 0x7363696c656b
(0)   Idle-Timeout = 120
(0)   Acct-Interim-Interval = 600
(0)   EAP-Message = 0x01a300061520
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xe897771ce834627007ac46db739f8c5a
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 169 from 192.168.0.4:57972 to 192.168.0.1:1812 length 343
(1)   User-Name = "scilek"
(1)   NAS-Identifier = "802aa8ac1ef9"
(1)   NAS-Port = 0
(1)   Called-Station-Id = "80-2A-A8-AD-1E-F9:SCILEK.NET"
(1)   Calling-Station-Id = "00-22-FA-F5-B9-0A"
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Connect-Info = "CONNECT 0Mbps 802.11b"
(1)   EAP-Message = 0x02a300ad1580000000a3160303009e0100009a030359870469b65e0a23b5eaddd5f8a167b18f33222b3d7b6c27b11d8e1a3f41f4e600003cc02cc02bc030c02f009f009ec024c023c028c02
7c00ac009c014c01300390033009d009c003d003c0035002f000a006a004000380032001300050004010000
(1)   State = 0xe897771ce834627007ac46db739f8c5a
(1)   Message-Authenticator = 0x0cc043c06d759590f37c1d1e9d7fd39c
(1) session-state: No cached attributes
(1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(1)   authorize {
(1)     [preprocess] = ok
(1)     redundant sql {
(1) sql1: EXPAND %{User-Name}
(1) sql1:    --> scilek
(1) sql1: SQL-User-Name set to 'scilek'
rlm_sql (sql1): Reserved connection (2)
(1) sql1: EXPAND CALL authorize_check('%{SQL-User-Name}')
(1) sql1:    --> CALL authorize_check('scilek')
(1) sql1: Executing select query: CALL authorize_check('scilek')
(1) sql1: User found in radcheck table
(1) sql1: Conditional check items matched, merging assignment check items
(1) sql1:   Cleartext-Password := "0000"
(1) sql1:   Simultaneous-Use := 1
(1) sql1: EXPAND CALL authorize_reply('%{SQL-User-Name}')
(1) sql1:    --> CALL authorize_reply('scilek')
(1) sql1: Executing select query: CALL authorize_reply('scilek')
(1) sql1: User found in radreply table, merging reply items
(1) sql1:   Class := 0x7363696c656b
(1) sql1:   Idle-Timeout := 120
(1) sql1:   Acct-Interim-Interval := 600
(1) sql1:   Exec-Program-Wait = "/usr/local/bin/bash /usr/local/etc/raddb/scripts/datacounter_auth.sh scilek"
(1) sql1: EXPAND CALL group_membership('%{SQL-User-Name}')
(1) sql1:    --> CALL group_membership('scilek')
(1) sql1: Executing select query: CALL group_membership('scilek')
(1) sql1: User not found in any groups
rlm_sql (sql1): Released connection (2)
(1)       [sql1] = ok
(1)     } # redundant sql = ok
(1) pap: No User-Password attribute in the request.  Cannot do PAP
(1)     [pap] = noop
(1) eap: Peer sent EAP Response (code 2) ID 163 length 173
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xe897771ce8346270
(1) eap: Finished EAP session with state 0xe897771ce8346270
(1) eap: Previous EAP request found for state 0xe897771ce8346270, released from the list
(1) eap: Peer sent packet with method EAP TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Authenticate
(1) eap_ttls: Continuing EAP-TLS
(1) eap_ttls: Peer indicated complete TLS record size will be 163 bytes
(1) eap_ttls: Got complete TLS record (163 bytes)
(1) eap_ttls: [eaptls verify] = length included
(1) eap_ttls: (other): before/accept initialization
(1) eap_ttls: TLS_accept: before/accept initialization
(1) eap_ttls: <<< recv TLS 1.2  [length 009e]
(1) eap_ttls: TLS_accept: SSLv3 read client hello A
(1) eap_ttls: >>> send TLS 1.2  [length 0039]
(1) eap_ttls: TLS_accept: SSLv3 write server hello A
(1) eap_ttls: >>> send TLS 1.2  [length 09bf]
(1) eap_ttls: TLS_accept: SSLv3 write certificate A
(1) eap_ttls: >>> send TLS 1.2  [length 014d]
(1) eap_ttls: TLS_accept: SSLv3 write key exchange A
(1) eap_ttls: >>> send TLS 1.2  [length 0004]
(1) eap_ttls: TLS_accept: SSLv3 write server done A
(1) eap_ttls: TLS_accept: SSLv3 flush data
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A
(1) eap_ttls: In SSL Handshake Phase
(1) eap_ttls: In SSL Accept mode
(1) eap_ttls: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 164 length 1004
(1) eap: EAP session adding &reply:State = 0xe897771ce9336270
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found.  Ignoring.
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(1) Sent Access-Challenge Id 169 from 192.168.0.1:1812 to 192.168.0.4:57972 length 0
(1)   Class = 0x7363696c656b
(1)   Idle-Timeout = 120
(1)   Acct-Interim-Interval = 600
(1)   EAP-Message = 0x01a403ec15c000000b5d16030300390200003503037dfe27a3e9ab444753cba68ab59c7fd4866e3d69ebc118ea299239d98e233fc400c03000000dff01000100000b0004030001021603030
9bf0b0009bb0009b800051430820510308203f8a003020102020102300d06092a864886f70d01010b050030
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xe897771ce933627007ac46db739f8c5a
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 170 from 192.168.0.4:57972 to 192.168.0.1:1812 length 176
(2)   User-Name = "scilek"
(2)   NAS-Identifier = "802aa8ac1ef9"
(2)   NAS-Port = 0
(2)   Called-Station-Id = "80-2A-A8-AD-1E-F9:SCILEK.NET"
(2)   Calling-Station-Id = "00-22-FA-F5-B9-0A"
(2)   Framed-MTU = 1400
(2)   NAS-Port-Type = Wireless-802.11
(2)   Connect-Info = "CONNECT 0Mbps 802.11b"
(2)   EAP-Message = 0x02a400061500
(2)   State = 0xe897771ce933627007ac46db739f8c5a
(2)   Message-Authenticator = 0x8df2c7cd0090dfd88fa15fc75d7c507e
(2) session-state: No cached attributes
(2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(2)   authorize {
(2)     [preprocess] = ok
(2)     redundant sql {
(2) sql1: EXPAND %{User-Name}
(2) sql1:    --> scilek
(2) sql1: SQL-User-Name set to 'scilek'
rlm_sql (sql1): Reserved connection (3)
(2) sql1: EXPAND CALL authorize_check('%{SQL-User-Name}')
(2) sql1:    --> CALL authorize_check('scilek')
(2) sql1: Executing select query: CALL authorize_check('scilek')
(2) sql1: User found in radcheck table
(2) sql1: Conditional check items matched, merging assignment check items
(2) sql1:   Cleartext-Password := "0000"
(2) sql1:   Simultaneous-Use := 1
(2) sql1: EXPAND CALL authorize_reply('%{SQL-User-Name}')
(2) sql1:    --> CALL authorize_reply('scilek')
(2) sql1: Executing select query: CALL authorize_reply('scilek')
(2) sql1: User found in radreply table, merging reply items
(2) sql1:   Class := 0x7363696c656b
(2) sql1:   Idle-Timeout := 120
(2) sql1:   Acct-Interim-Interval := 600
(2) sql1:   Exec-Program-Wait = "/usr/local/bin/bash /usr/local/etc/raddb/scripts/datacounter_auth.sh scilek"
(2) sql1: EXPAND CALL group_membership('%{SQL-User-Name}')
(2) sql1:    --> CALL group_membership('scilek')
(2) sql1: Executing select query: CALL group_membership('scilek')
(2) sql1: User not found in any groups
rlm_sql (sql1): Released connection (3)
(2)       [sql1] = ok
(2)     } # redundant sql = ok
(2) pap: No User-Password attribute in the request.  Cannot do PAP
(2)     [pap] = noop
(2) eap: Peer sent EAP Response (code 2) ID 164 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0xe897771ce9336270
(2) eap: Finished EAP session with state 0xe897771ce9336270
(2) eap: Previous EAP request found for state 0xe897771ce9336270, released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: Peer ACKed our handshake fragment
(2) eap_ttls: [eaptls verify] = request
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 165 length 1004
(2) eap: EAP session adding &reply:State = 0xe897771cea326270
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found.  Ignoring.
(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(2) Sent Access-Challenge Id 170 from 192.168.0.1:1812 to 192.168.0.4:57972 length 0
(2)   Class = 0x7363696c656b
(2)   Idle-Timeout = 120
(2)   Acct-Interim-Interval = 600
(2)   EAP-Message = 0x01a503ec15c000000b5d161c73656c6168617474696e5f63696c656b40686f746d61696c2e636f6d3111300f0603550403130864616d6c612d636182010030130603551d25040c300a06082
b0601050507030230200603551d110419301782157777772e64616d6c616b697a79757264752e636f6d300d
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xe897771cea32627007ac46db739f8c5a
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 171 from 192.168.0.4:57972 to 192.168.0.1:1812 length 176
(3)   User-Name = "scilek"
(3)   NAS-Identifier = "802aa8ac1ef9"
(3)   NAS-Port = 0
(3)   Called-Station-Id = "80-2A-A8-AD-1E-F9:SCILEK.NET"
(3)   Calling-Station-Id = "00-22-FA-F5-B9-0A"
(3)   Framed-MTU = 1400
(3)   NAS-Port-Type = Wireless-802.11
(3)   Connect-Info = "CONNECT 0Mbps 802.11b"
(3)   EAP-Message = 0x02a500061500
(3)   State = 0xe897771cea32627007ac46db739f8c5a
(3)   Message-Authenticator = 0xfd5a586b2f6edad6a0af81a8ca267c9f
(3) session-state: No cached attributes
(3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(3)   authorize {
(3)     [preprocess] = ok
(3)     redundant sql {
(3) sql1: EXPAND %{User-Name}
(3) sql1:    --> scilek
(3) sql1: SQL-User-Name set to 'scilek'
rlm_sql (sql1): Reserved connection (4)
(3) sql1: EXPAND CALL authorize_check('%{SQL-User-Name}')
(3) sql1:    --> CALL authorize_check('scilek')
(3) sql1: Executing select query: CALL authorize_check('scilek')
(3) sql1: User found in radcheck table
(3) sql1: Conditional check items matched, merging assignment check items
(3) sql1:   Cleartext-Password := "0000"
(3) sql1:   Simultaneous-Use := 1
(3) sql1: EXPAND CALL authorize_reply('%{SQL-User-Name}')
(3) sql1:    --> CALL authorize_reply('scilek')
(3) sql1: Executing select query: CALL authorize_reply('scilek')
(3) sql1: User found in radreply table, merging reply items
(3) sql1:   Class := 0x7363696c656b
(3) sql1:   Idle-Timeout := 120
(3) sql1:   Acct-Interim-Interval := 600
(3) sql1:   Exec-Program-Wait = "/usr/local/bin/bash /usr/local/etc/raddb/scripts/datacounter_auth.sh scilek"
(3) sql1: EXPAND CALL group_membership('%{SQL-User-Name}')
(3) sql1:    --> CALL group_membership('scilek')
(3) sql1: Executing select query: CALL group_membership('scilek')
(3) sql1: User not found in any groups
rlm_sql (sql1): Released connection (4)
(3)       [sql1] = ok
(3)     } # redundant sql = ok
(3) pap: No User-Password attribute in the request.  Cannot do PAP
(3)     [pap] = noop
(3) eap: Peer sent EAP Response (code 2) ID 165 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xe897771cea326270
(3) eap: Finished EAP session with state 0xe897771cea326270
(3) eap: Previous EAP request found for state 0xe897771cea326270, released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: Peer ACKed our handshake fragment
(3) eap_ttls: [eaptls verify] = request
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 166 length 931
(3) eap: EAP session adding &reply:State = 0xe897771ceb316270
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found.  Ignoring.
(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(3) Sent Access-Challenge Id 171 from 192.168.0.1:1812 to 192.168.0.4:57972 length 0
(3)   Class = 0x7363696c656b
(3)   Idle-Timeout = 120
(3)   Acct-Interim-Interval = 600
(3)   EAP-Message = 0x01a603a3158000000b5d7b331a7cb6a269a2a68568a263e95de9f53ec3793bc049b13f139ae3b681106134abf5b4d08b0203010001a381fc3081f9301d0603551d0e04160414af297b64d53
35e54578a00c1231a91e0b971ea743081bc0603551d230481b43081b18014af297b64d5335e54578a00c123
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xe897771ceb31627007ac46db739f8c5a
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 172 from 192.168.0.4:57972 to 192.168.0.1:1812 length 306
(4)   User-Name = "scilek"
(4)   NAS-Identifier = "802aa8ac1ef9"
(4)   NAS-Port = 0
(4)   Called-Station-Id = "80-2A-A8-AD-1E-F9:SCILEK.NET"
(4)   Calling-Station-Id = "00-22-FA-F5-B9-0A"
(4)   Framed-MTU = 1400
(4)   NAS-Port-Type = Wireless-802.11
(4)   Connect-Info = "CONNECT 0Mbps 802.11b"
(4)   EAP-Message = 0x02a6008815800000007e16030300461000004241045b1b29b181a70de1ebfecbdfa956f28aea7e6e40a89cb44c1daab2e59ef256a2df2f44fb477ac53fecaec05befd6c13bad9449e7fc259
c2c2cf9a59efac09bec1403030001011603030028000000000000000036008a13f417bcd2230e9731d6247d
(4)   State = 0xe897771ceb31627007ac46db739f8c5a
(4)   Message-Authenticator = 0x8c3e240eaf51b977514f1b5e5039f16f
(4) session-state: No cached attributes
(4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(4)   authorize {
(4)     [preprocess] = ok
(4)     redundant sql {
(4) sql1: EXPAND %{User-Name}
(4) sql1:    --> scilek
(4) sql1: SQL-User-Name set to 'scilek'
rlm_sql (sql1): Reserved connection (5)
(4) sql1: EXPAND CALL authorize_check('%{SQL-User-Name}')
(4) sql1:    --> CALL authorize_check('scilek')
(4) sql1: Executing select query: CALL authorize_check('scilek')
(4) sql1: User found in radcheck table
(4) sql1: Conditional check items matched, merging assignment check items
(4) sql1:   Cleartext-Password := "0000"
(4) sql1:   Simultaneous-Use := 1
(4) sql1: EXPAND CALL authorize_reply('%{SQL-User-Name}')
(4) sql1:    --> CALL authorize_reply('scilek')
(4) sql1: Executing select query: CALL authorize_reply('scilek')
(4) sql1: User found in radreply table, merging reply items
(4) sql1:   Class := 0x7363696c656b
(4) sql1:   Idle-Timeout := 120
(4) sql1:   Acct-Interim-Interval := 600
(4) sql1:   Exec-Program-Wait = "/usr/local/bin/bash /usr/local/etc/raddb/scripts/datacounter_auth.sh scilek"
(4) sql1: EXPAND CALL group_membership('%{SQL-User-Name}')
(4) sql1:    --> CALL group_membership('scilek')
(4) sql1: Executing select query: CALL group_membership('scilek')
(4) sql1: User not found in any groups
rlm_sql (sql1): Released connection (5)
(4)       [sql1] = ok
(4)     } # redundant sql = ok
(4) pap: No User-Password attribute in the request.  Cannot do PAP
(4)     [pap] = noop
(4) eap: Peer sent EAP Response (code 2) ID 166 length 136
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0xe897771ceb316270
(4) eap: Finished EAP session with state 0xe897771ceb316270
(4) eap: Previous EAP request found for state 0xe897771ceb316270, released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: Peer indicated complete TLS record size will be 126 bytes
(4) eap_ttls: Got complete TLS record (126 bytes)
(4) eap_ttls: [eaptls verify] = length included
(4) eap_ttls: <<< recv TLS 1.2  [length 0046]
(4) eap_ttls: TLS_accept: SSLv3 read client key exchange A
(4) eap_ttls: TLS_accept: SSLv3 read certificate verify A
(4) eap_ttls: <<< recv TLS 1.2  [length 0001]
(4) eap_ttls: <<< recv TLS 1.2  [length 0010]
(4) eap_ttls: TLS_accept: SSLv3 read finished A
(4) eap_ttls: >>> send TLS 1.2  [length 0001]
(4) eap_ttls: TLS_accept: SSLv3 write change cipher spec A
(4) eap_ttls: >>> send TLS 1.2  [length 0010]
(4) eap_ttls: TLS_accept: SSLv3 write finished A
(4) eap_ttls: TLS_accept: SSLv3 flush data
(4) eap_ttls: (other): SSL negotiation finished successfully
(4) eap_ttls: SSL Connection Established
(4) eap_ttls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 167 length 61
(4) eap: EAP session adding &reply:State = 0xe897771cec306270
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found.  Ignoring.
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(4) Sent Access-Challenge Id 172 from 192.168.0.1:1812 to 192.168.0.4:57972 length 0
(4)   Class = 0x7363696c656b
(4)   Idle-Timeout = 120
(4)   Acct-Interim-Interval = 600
(4)   EAP-Message = 0x01a7003d158000000033140303000101160303002823a6cf28000913c96fb02ffa44ae6a23eef6b6fb2beb0290d27d34b79a51fca2759dae2369b8660e
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xe897771cec30627007ac46db739f8c5a
(4) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 168 with timestamp +13
(1) Cleaning up request packet ID 169 with timestamp +13
(2) Cleaning up request packet ID 170 with timestamp +14
(3) Cleaning up request packet ID 171 with timestamp +14
(4) Cleaning up request packet ID 172 with timestamp +14
Ready to process requests


[https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>      Virus-free. www.avast.com<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>


More information about the Freeradius-Users mailing list