Attributes from DEFAULT user are always used although there's a more specific user
Alex D.
listensammler at gmx.de
Thu Dec 21 15:40:58 CET 2017
Hello,
i try to use files and SQL for authentication. In my users file, i have
a DEFAULT user and a specific user 'HSI/DEU.MYID.47110815' in SQL
radcheck/radreply table. If my user is authenticated, Attributes from
respective user *and* from DEFAULT user are replied to the nas although
there is no explicit "Fall-Through = Yes" attribute. Is that an
excpected behaviour ?
How can i achieve that only attributes from specific user is replied and
those from DEFAULT user are only replied, when there is no accurate user.
root at quagga:/opt/freeradius/etc/raddb# more users
DEFAULT User-Name =~ "^HSI.*", Auth-Type := Accept
Class = "Default"
reply-detail-20171221:
Thu Dec 21 14:43:52 2017
Packet-Type = Access-Accept
Class = 0x44656661756c74
ERX-Virtual-Router-Name == "VRF-132"
mysql> select * from radreply;
+----+-----------------------+-------------------------+----+---------+
| id | username | attribute | op | value |
+----+-----------------------+-------------------------+----+---------+
| 4 | HSI/DEU.MYID.47110815 | ERX-Virtual-Router-Name | == | VRF-132 |
+----+-----------------------+-------------------------+----+---------+
Freeradius version is 2.2.10. Attached you also find a debug from the
mentioned authentication request.
Regards,
Alex
-------------- next part --------------
root at quagga:/opt/freeradius/etc/raddb# /opt/freeradius/sbin/radiusd -X
radiusd: FreeRADIUS Version 2.2.10, for host i686-pc-linux-gnu, built on Dec 20 2017 at 23:19:06
Copyright (C) 1999-2015 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License.
For more information about these matters, see the file named COPYRIGHT.
Starting - reading configuration files ...
including configuration file /opt/freeradius/etc/raddb/radiusd.conf
including configuration file /opt/freeradius/etc/raddb/proxy.conf
including configuration file /opt/freeradius/etc/raddb/clients.conf
including files in directory /opt/freeradius/etc/raddb/modules/
including configuration file /opt/freeradius/etc/raddb/modules/files
including configuration file /opt/freeradius/etc/raddb/modules/radrelay
including configuration file /opt/freeradius/etc/raddb/modules/inner-eap
including configuration file /opt/freeradius/etc/raddb/modules/sql_log
including configuration file /opt/freeradius/etc/raddb/modules/expr
including configuration file /opt/freeradius/etc/raddb/modules/attr_rewrite
including configuration file /opt/freeradius/etc/raddb/modules/counter
including configuration file /opt/freeradius/etc/raddb/modules/radutmp
including configuration file /opt/freeradius/etc/raddb/modules/mschap
including configuration file /opt/freeradius/etc/raddb/modules/perl
including configuration file /opt/freeradius/etc/raddb/modules/ntlm_auth
including configuration file /opt/freeradius/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /opt/freeradius/etc/raddb/modules/etc_group
including configuration file /opt/freeradius/etc/raddb/modules/otp
including configuration file /opt/freeradius/etc/raddb/modules/detail.log
including configuration file /opt/freeradius/etc/raddb/modules/krb5
including configuration file /opt/freeradius/etc/raddb/modules/ippool
including configuration file /opt/freeradius/etc/raddb/modules/expiration
including configuration file /opt/freeradius/etc/raddb/modules/detail.example.com
including configuration file /opt/freeradius/etc/raddb/modules/logintime
including configuration file /opt/freeradius/etc/raddb/modules/acct_unique
including configuration file /opt/freeradius/etc/raddb/modules/ldap
including configuration file /opt/freeradius/etc/raddb/modules/dhcp_sqlippool
including configuration file /opt/freeradius/etc/raddb/sql/mysql/ippool-dhcp.conf
including configuration file /opt/freeradius/etc/raddb/modules/policy
including configuration file /opt/freeradius/etc/raddb/modules/checkval
including configuration file /opt/freeradius/etc/raddb/modules/cache
including configuration file /opt/freeradius/etc/raddb/modules/replicate
including configuration file /opt/freeradius/etc/raddb/modules/smsotp
including configuration file /opt/freeradius/etc/raddb/modules/soh
including configuration file /opt/freeradius/etc/raddb/modules/digest
including configuration file /opt/freeradius/etc/raddb/modules/mac2ip
including configuration file /opt/freeradius/etc/raddb/modules/redis
including configuration file /opt/freeradius/etc/raddb/modules/passwd
including configuration file /opt/freeradius/etc/raddb/modules/rediswho
including configuration file /opt/freeradius/etc/raddb/modules/sradutmp
including configuration file /opt/freeradius/etc/raddb/modules/echo
including configuration file /opt/freeradius/etc/raddb/modules/smbpasswd
including configuration file /opt/freeradius/etc/raddb/modules/cui
including configuration file /opt/freeradius/etc/raddb/modules/dynamic_clients
including configuration file /opt/freeradius/etc/raddb/modules/pam
including configuration file /opt/freeradius/etc/raddb/modules/realm
including configuration file /opt/freeradius/etc/raddb/modules/linelog
including configuration file /opt/freeradius/etc/raddb/modules/chap
including configuration file /opt/freeradius/etc/raddb/modules/attr_filter
including configuration file /opt/freeradius/etc/raddb/modules/detail
including configuration file /opt/freeradius/etc/raddb/modules/opendirectory
including configuration file /opt/freeradius/etc/raddb/modules/exec
including configuration file /opt/freeradius/etc/raddb/modules/wimax
including configuration file /opt/freeradius/etc/raddb/modules/unix
including configuration file /opt/freeradius/etc/raddb/modules/preprocess
including configuration file /opt/freeradius/etc/raddb/modules/pap
including configuration file /opt/freeradius/etc/raddb/modules/always
including configuration file /opt/freeradius/etc/raddb/modules/mac2vlan
including configuration file /opt/freeradius/etc/raddb/sql.conf
including configuration file /opt/freeradius/etc/raddb/sql/mysql/dialup.conf
including configuration file /opt/freeradius/etc/raddb/policy.conf
including files in directory /opt/freeradius/etc/raddb/sites-enabled/
including configuration file /opt/freeradius/etc/raddb/sites-enabled/default
including configuration file /opt/freeradius/etc/raddb/sites-enabled/control-socket
main {
allow_core_dumps = no
}
including dictionary file /opt/freeradius/etc/raddb/dictionary
main {
name = "radiusd"
prefix = "/opt/freeradius"
localstatedir = "/opt/freeradius/var"
sbindir = "/opt/freeradius/sbin"
logdir = "/var/log/radius"
run_dir = "/opt/freeradius/var/run/radiusd"
libdir = "/opt/freeradius/lib"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/opt/freeradius/var/run/radiusd/radiusd.pid"
checkrad = "/opt/freeradius/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
allow_vulnerable_openssl = no
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client 212.88.155.47 {
require_message_authenticator = no
secret = "wz34th"
shortname = "vs-mx5-lab.6898-lo0"
nastype = "other"
}
client 212.18.216.16/32 {
require_message_authenticator = no
secret = "wz34th"
shortname = "vs-mx5-lab.6898-vrf-132"
nastype = "other"
}
client 212.18.216.17/32 {
require_message_authenticator = no
secret = "wz34th"
shortname = "vs-mx5-lab.6898-vrf-232"
nastype = "other"
}
client 212.18.216.18/32 {
require_message_authenticator = no
secret = "wz34th"
shortname = "vs-mx5-lab.6898-vrf-432"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /opt/freeradius/etc/raddb/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /opt/freeradius/etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file /opt/freeradius/etc/raddb/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file /opt/freeradius/etc/raddb/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /opt/freeradius/etc/raddb/radiusd.conf
modules {
Module: Creating Auth-Type = digest
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /opt/freeradius/etc/raddb/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /opt/freeradius/etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /opt/freeradius/etc/raddb/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
allow_retry = yes
}
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file /opt/freeradius/etc/raddb/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /opt/freeradius/etc/raddb/modules/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file /opt/freeradius/etc/raddb/modules/preprocess
preprocess {
huntgroups = "/opt/freeradius/etc/raddb/huntgroups"
hints = "/opt/freeradius/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /opt/freeradius/etc/raddb/huntgroups
reading pairlist file /opt/freeradius/etc/raddb/hints
Module: Linked to module rlm_detail
Module: Instantiating module "auth_log" from file /opt/freeradius/etc/raddb/modules/detail.log
detail auth_log {
detailfile = "/var/log/radius/radacct/auth-detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
escape_filenames = no
}
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /opt/freeradius/etc/raddb/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /opt/freeradius/etc/raddb/modules/files
files {
usersfile = "/opt/freeradius/etc/raddb/users"
acctusersfile = "/opt/freeradius/etc/raddb/acct_users"
preproxy_usersfile = "/opt/freeradius/etc/raddb/preproxy_users"
compat = "no"
}
reading pairlist file /opt/freeradius/etc/raddb/users
reading pairlist file /opt/freeradius/etc/raddb/acct_users
reading pairlist file /opt/freeradius/etc/raddb/preproxy_users
Module: Linked to module rlm_sql
Module: Instantiating module "sql" from file /opt/freeradius/etc/raddb/sql.conf
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = ""
login = "radius"
password = "IlsFmgB"
radius_db = "radius"
read_groups = yes
sqltrace = no
sqltracefile = "/var/log/radius/sqltrace.sql"
readclients = no
deletestalesessions = yes
num_sql_socks = 4
lifetime = 0
max_queries = 0
sql_user_name = "%{User-Name}"
default_user_profile = ""
nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id"
accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'"
accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{%{Acct-Session-Time}:-0}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{%{Acct-Session-Time}:-0}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{%{Acct-Session-Time}:-0}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{%{Acct-Session-Time}:-0}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')"
group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
connect_failure_retry_delay = 60
simul_count_query = ""
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file /opt/freeradius/etc/raddb/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Instantiating module "detail" from file /opt/freeradius/etc/raddb/modules/detail
detail {
detailfile = "/var/log/radius/radacct/detail"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
escape_filenames = no
}
Module: Linked to module rlm_sql_log
Module: Instantiating module "sql_log" from file /opt/freeradius/etc/raddb/modules/sql_log
sql_log {
path = "/var/log/radius/radacct/sql-relay"
Post-Auth = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ('%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', '%S');"
sql_user_name = "%{%{User-Name}:-DEFAULT}"
utf8 = no
safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file /opt/freeradius/etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/opt/freeradius/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /opt/freeradius/etc/raddb/attrs.accounting_response
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /opt/freeradius/etc/raddb/modules/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "reply_log" from file /opt/freeradius/etc/raddb/modules/detail.log
detail reply_log {
detailfile = "/var/log/radius/radacct//reply-detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
escape_filenames = no
}
Module: Instantiating module "attr_filter.access_reject" from file /opt/freeradius/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/opt/freeradius/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /opt/freeradius/etc/raddb/attrs.access_reject
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/opt/freeradius/var/run/radiusd/radiusd.sock"
}
}
... adding new socket proxy address * port 54215
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /opt/freeradius/var/run/radiusd/radiusd.sock
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 212.88.155.47 port 62146, id=14, length=637
User-Name = "HSI/DEU.MYID.47110815"
User-Password = "lab"
Service-Type = Framed-User
Chargeable-User-Identity = ""
Acct-Session-Id = "169"
Calling-Station-Id = "vs-mx5-testlab.6898/1ISAM-GSL-7302 eth 1/1/15/02/DEU.MYID.47110815"
ERX-Dhcp-Options = 0x3501013c1341564d2044484350432076392e30342e3339353d0fffd77f2ae8000300010896d77f2ae80c09667269747a2e626f78370b01030679f9d40f782a1a9e528c011c314953414d2d47534c2d373330322065746820312f312f31352f303202114445552e4d5949442e3437313130383135095900000de95481040000049f8204000044f683040000020084040000052085040000a0ab8604000000008704000004a08804000064608904000000008a04000000808b04000000088c04000000038d04000000088e0400000008
ERX-Dhcp-Gi-Address = 212.88.155.47
ERX-Dhcp-Mac-Addr = "0896.d77f.2ae8"
NAS-Identifier = "vs-mx5-testlab.6898"
NAS-Port = 284201092
NAS-Port-Id = "ge-1/1/3.demux0.3221225559:777-132"
NAS-Port-Type = Ethernet
ERX-Pppoe-Description = "pppoe 08:96:d7:7f:2a:e8"
ADSL-Agent-Circuit-Id = "1ISAM-GSL-7302 eth 1/1/15/02"
ADSL-Agent-Remote-Id = "DEU.MYID.47110815"
Actual-Data-Rate-Upstream = 1183
Actual-Data-Rate-Downstream = 17654
Minimum-Data-Rate-Upstream = 512
Minimum-Data-Rate-Downstream = 1312
Attainable-Data-Rate-Upstream = 41131
Attainable-Data-Rate-Downstream = 0
Maximum-Data-Rate-Upstream = 1184
Maximum-Data-Rate-Downstream = 25696
Minimum-Data-Rate-Upstream-Low-Power = 0
Minimum-Data-Rate-Downstream-Low-Power = 128
Maximum-Interleaving-Delay-Upstream = 8
Actual-Interleaving-Delay-Upstream = 3
Maximum-Interleaving-Delay-Downstream = 8
Actual-Interleaving-Delay-Downstream = 8
NAS-IP-Address = 212.88.155.47
# Executing section authorize from file /opt/freeradius/etc/raddb/sites-enabled/default
+group authorize {
++[preprocess] = ok
[auth_log] expand: /var/log/radius/radacct/auth-detail-%Y%m%d -> /var/log/radius/radacct/auth-detail-20171221
[auth_log] /var/log/radius/radacct/auth-detail-%Y%m%d expands to /var/log/radius/radacct/auth-detail-20171221
[auth_log] expand: %t -> Thu Dec 21 14:43:52 2017
++[auth_log] = ok
++[chap] = noop
++[mschap] = noop
++[digest] = noop
[suffix] No '@' in User-Name = "HSI/DEU.MYID.47110815", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
[files] expand: %{User-Name} -> HSI/DEU.MYID.47110815
[files] users: Matched entry DEFAULT at line 1
++[files] = ok
[sql] expand: %{User-Name} -> HSI/DEU.MYID.47110815
[sql] sql_set_user escaped user --> 'HSI/DEU.MYID.47110815'
rlm_sql (sql): Reserving sql socket id: 3
[sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'HSI/DEU.MYID.47110815' ORDER BY id
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'HSI/DEU.MYID.47110815' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'HSI/DEU.MYID.47110815' ORDER BY priority
rlm_sql (sql): Released sql socket id: 3
++[sql] = ok
++[expiration] = noop
++[logintime] = noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] = noop
+} # group authorize = ok
Found Auth-Type = Accept
Auth-Type = Accept, accepting the user
# Executing section post-auth from file /opt/freeradius/etc/raddb/sites-enabled/default
+group post-auth {
[reply_log] expand: /var/log/radius/radacct//reply-detail-%Y%m%d -> /var/log/radius/radacct//reply-detail-20171221
[reply_log] /var/log/radius/radacct//reply-detail-%Y%m%d expands to /var/log/radius/radacct//reply-detail-20171221
[reply_log] expand: %t -> Thu Dec 21 14:43:52 2017
++[reply_log] = ok
[sql_log] Processing sql_log_postauth
[sql_log] expand: %{User-Name} -> HSI/DEU.MYID.47110815
[sql_log] expand: %{%{User-Name}:-DEFAULT} -> HSI/DEU.MYID.47110815
[sql_log] sql_set_user escaped user --> 'HSI/DEU.MYID.47110815'
[sql_log] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details
[sql_log] expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ('%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', '%S'); -> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ('HSI/DEU.MYID.47110815', 'lab', 'Access-Accept', '2017-12-21 14:43:52');
[sql_log] expand: /var/log/radius/radacct/sql-relay -> /var/log/radius/radacct/sql-relay
++[sql_log] = ok
++[exec] = noop
+} # group post-auth = ok
Sending Access-Accept of id 14 to 212.88.155.47 port 62146
Class = 0x44656661756c74
ERX-Virtual-Router-Name == "VRF-132"
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 212.88.155.47 port 62146, id=15, length=706
User-Name = "HSI/DEU.MYID.47110815"
Acct-Status-Type = Start
Acct-Session-Id = "169"
Event-Timestamp = "Dec 21 2017 14:43:54 CET"
Acct-Delay-Time = 0
Service-Type = Framed-User
ERX-Attr-177 = 0x506f72742073706565643a20313030303030306b
Acct-Authentic = RADIUS
Calling-Station-Id = "vs-mx5-testlab.6898/1ISAM-GSL-7302 eth 1/1/15/02/DEU.MYID.47110815"
Class = 0x44656661756c74
ERX-Dhcp-Options = 0x3501013c1341564d2044484350432076392e30342e3339353d0fffd77f2ae8000300010896d77f2ae80c09667269747a2e626f78370b01030679f9d40f782a1a9e528c011c314953414d2d47534c2d373330322065746820312f312f31352f303202114445552e4d5949442e3437313130383135095900000de95481040000049f8204000044f683040000020084040000052085040000a0ab8604000000008704000004a08804000064608904000000008a04000000808b04000000088c04000000038d04000000088e0400000008
ERX-Dhcp-Gi-Address = 192.168.203.21
ERX-Dhcp-Mac-Addr = "0896.d77f.2ae8"
Framed-IP-Address = 100.127.128.12
NAS-Identifier = "vs-mx5-testlab.6898"
NAS-Port = 284201092
NAS-Port-Id = "ge-1/1/3.demux0.3221225559:777-132"
NAS-Port-Type = Ethernet
ERX-Virtual-Router-Name = "default:VRF-132"
ERX-Pppoe-Description = "pppoe 08:96:d7:7f:2a:e8"
ADSL-Agent-Circuit-Id = "1ISAM-GSL-7302 eth 1/1/15/02"
ADSL-Agent-Remote-Id = "DEU.MYID.47110815"
Actual-Data-Rate-Upstream = 1183
Actual-Data-Rate-Downstream = 17654
Minimum-Data-Rate-Upstream = 512
Minimum-Data-Rate-Downstream = 1312
Attainable-Data-Rate-Upstream = 41131
Attainable-Data-Rate-Downstream = 0
Maximum-Data-Rate-Upstream = 1184
Maximum-Data-Rate-Downstream = 25696
Minimum-Data-Rate-Upstream-Low-Power = 0
Minimum-Data-Rate-Downstream-Low-Power = 128
Maximum-Interleaving-Delay-Upstream = 8
Actual-Interleaving-Delay-Upstream = 3
Maximum-Interleaving-Delay-Downstream = 8
Actual-Interleaving-Delay-Downstream = 8
NAS-IP-Address = 212.88.155.47
# Executing section preacct from file /opt/freeradius/etc/raddb/sites-enabled/default
+group preacct {
++[preprocess] = ok
[acct_unique] Hashing 'NAS-Port = 284201092,NAS-Identifier = "vs-mx5-testlab.6898",NAS-IP-Address = 212.88.155.47,Acct-Session-Id = "169",User-Name = "HSI/DEU.MYID.47110815"'
[acct_unique] Acct-Unique-Session-ID = "9f08cfde822d1d74".
++[acct_unique] = ok
[suffix] No '@' in User-Name = "HSI/DEU.MYID.47110815", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
++[files] = noop
+} # group preacct = ok
# Executing section accounting from file /opt/freeradius/etc/raddb/sites-enabled/default
+group accounting {
[detail] expand: /var/log/radius/radacct/detail -> /var/log/radius/radacct/detail
[detail] /var/log/radius/radacct/detail expands to /var/log/radius/radacct/detail
[detail] expand: %t -> Thu Dec 21 14:43:54 2017
++[detail] = ok
[sql] expand: %{User-Name} -> HSI/DEU.MYID.47110815
[sql] sql_set_user escaped user --> 'HSI/DEU.MYID.47110815'
[sql] expand: %{Acct-Delay-Time} -> 0
[sql] expand: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
rlm_sql (sql): Reserving sql socket id: 2
rlm_sql (sql): Released sql socket id: 2
++[sql] = ok
[sql_log] Processing sql_log_accounting
[sql_log] expand: %{User-Name} -> HSI/DEU.MYID.47110815
[sql_log] expand: %{%{User-Name}:-DEFAULT} -> HSI/DEU.MYID.47110815
[sql_log] sql_set_user escaped user --> 'HSI/DEU.MYID.47110815'
[sql_log] expand: INSERT INTO radacct (AcctSessionId, UserName, NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, AcctSessionTime, AcctTerminateCause) VALUES ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', '%{Framed-IP-Address}', '%S', '0', '0', ''); -> INSERT INTO radacct (AcctSessionId, UserName, NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, AcctSessionTime, AcctTerminateCause) VALUES ('169', 'HSI/DEU.MYID.47110815', '212.88.155.47', '100.127.128.12', '2017-12-21 14:43:54', '0', '0', '');
[sql_log] expand: /var/log/radius/radacct/sql-relay -> /var/log/radius/radacct/sql-relay
++[sql_log] = ok
++[exec] = noop
[attr_filter.accounting_response] expand: %{User-Name} -> HSI/DEU.MYID.47110815
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] = updated
+} # group accounting = updated
Sending Accounting-Response of id 15 to 212.88.155.47 port 62146
Finished request 1.
Cleaning up request 1 ID 15 with timestamp +140
Going to the next request
Waking up in 3.6 seconds.
rad_recv: Accounting-Request packet from host 212.88.155.47 port 62146, id=17, length=844
User-Name = "HSI/DEU.MYID.47110815"
Acct-Status-Type = Interim-Update
Acct-Session-Id = "169"
Event-Timestamp = "Dec 21 2017 14:43:54 CET"
Acct-Input-Octets = 0
Acct-Output-Octets = 0
Acct-Session-Time = 0
Acct-Input-Packets = 0
Acct-Output-Packets = 0
Acct-Delay-Time = 0
Service-Type = Framed-User
ERX-Attr-177 = 0x506f72742073706565643a20313030303030306b
Acct-Authentic = RADIUS
Calling-Station-Id = "vs-mx5-testlab.6898/1ISAM-GSL-7302 eth 1/1/15/02/DEU.MYID.47110815"
Class = 0x44656661756c74
ERX-Dhcp-Options = 0x3501013c1341564d2044484350432076392e30342e3339353d0fffd77f2ae8000300010896d77f2ae80c09667269747a2e626f78370b01030679f9d40f782a1a9e528c011c314953414d2d47534c2d373330322065746820312f312f31352f303202114445552e4d5949442e3437313130383135095900000de95481040000049f8204000044f683040000020084040000052085040000a0ab8604000000008704000004a08804000064608904000000008a04000000808b04000000088c04000000038d04000000088e0400000008
ERX-Dhcp-Gi-Address = 192.168.203.21
ERX-Dhcp-Mac-Addr = "0896.d77f.2ae8"
Framed-IP-Address = 100.127.128.12
ERX-Input-Gigapkts = 0
Acct-Input-Gigawords = 0
NAS-Identifier = "vs-mx5-testlab.6898"
NAS-Port = 284201092
NAS-Port-Id = "ge-1/1/3.demux0.3221225559:777-132"
NAS-Port-Type = Ethernet
ERX-Output-Gigapkts = 0
Acct-Output-Gigawords = 0
ERX-IPv6-Acct-Input-Octets = 0
ERX-IPv6-Acct-Output-Octets = 0
ERX-IPv6-Acct-Input-Packets = 0
ERX-IPv6-Acct-Output-Packets = 0
ERX-IPv6-Acct-Input-Gigawords = 0
ERX-IPv6-Acct-Output-Gigawords = 0
ERX-Virtual-Router-Name = "default:VRF-132"
ERX-Pppoe-Description = "pppoe 08:96:d7:7f:2a:e8"
ADSL-Agent-Circuit-Id = "1ISAM-GSL-7302 eth 1/1/15/02"
ADSL-Agent-Remote-Id = "DEU.MYID.47110815"
Actual-Data-Rate-Upstream = 1183
Actual-Data-Rate-Downstream = 17654
Minimum-Data-Rate-Upstream = 512
Minimum-Data-Rate-Downstream = 1312
Attainable-Data-Rate-Upstream = 41131
Attainable-Data-Rate-Downstream = 0
Maximum-Data-Rate-Upstream = 1184
Maximum-Data-Rate-Downstream = 25696
Minimum-Data-Rate-Upstream-Low-Power = 0
Minimum-Data-Rate-Downstream-Low-Power = 128
Maximum-Interleaving-Delay-Upstream = 8
Actual-Interleaving-Delay-Upstream = 3
Maximum-Interleaving-Delay-Downstream = 8
Actual-Interleaving-Delay-Downstream = 8
NAS-IP-Address = 212.88.155.47
# Executing section preacct from file /opt/freeradius/etc/raddb/sites-enabled/default
+group preacct {
++[preprocess] = ok
[acct_unique] Hashing 'NAS-Port = 284201092,NAS-Identifier = "vs-mx5-testlab.6898",NAS-IP-Address = 212.88.155.47,Acct-Session-Id = "169",User-Name = "HSI/DEU.MYID.47110815"'
[acct_unique] Acct-Unique-Session-ID = "9f08cfde822d1d74".
++[acct_unique] = ok
[suffix] No '@' in User-Name = "HSI/DEU.MYID.47110815", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
++[files] = noop
+} # group preacct = ok
# Executing section accounting from file /opt/freeradius/etc/raddb/sites-enabled/default
+group accounting {
[detail] expand: /var/log/radius/radacct/detail -> /var/log/radius/radacct/detail
[detail] /var/log/radius/radacct/detail expands to /var/log/radius/radacct/detail
[detail] expand: %t -> Thu Dec 21 14:43:54 2017
++[detail] = ok
[sql] expand: %{User-Name} -> HSI/DEU.MYID.47110815
[sql] sql_set_user escaped user --> 'HSI/DEU.MYID.47110815'
[sql] expand: %{Acct-Session-Time} -> 0
[sql] expand: %{Acct-Input-Gigawords} -> 0
[sql] expand: %{Acct-Input-Octets} -> 0
[sql] expand: %{Acct-Output-Gigawords} -> 0
[sql] expand: %{Acct-Output-Octets} -> 0
[sql] expand: UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{%{Acct-Session-Time}:-0}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}' -> UPDATE radacct SET framedipaddress = '100.127.128.12', acctsessiontime = '0', acctinputoctets = '0' << 32 | '0', acctoutputoctets = '0' << 32 | '0' WHERE acctsessionid = '169' AND username = 'HSI/DEU.MYID.47110815'
rlm_sql (sql): Reserving sql socket id: 1
rlm_sql (sql): Released sql socket id: 1
++[sql] = ok
[sql_log] Processing sql_log_accounting
[sql_log] expand: %{User-Name} -> HSI/DEU.MYID.47110815
[sql_log] expand: %{%{User-Name}:-DEFAULT} -> HSI/DEU.MYID.47110815
[sql_log] sql_set_user escaped user --> 'HSI/DEU.MYID.47110815'
[sql_log] expand: INSERT INTO radacct (AcctSessionId, UserName, NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, AcctSessionTime, AcctTerminateCause) VALUES ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', '%{Framed-IP-Address}', '0', '0', '%{Acct-Session-Time}',''); -> INSERT INTO radacct (AcctSessionId, UserName, NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, AcctSessionTime, AcctTerminateCause) VALUES ('169', 'HSI/DEU.MYID.47110815', '212.88.155.47', '100.127.128.12', '0', '0', '0','');
[sql_log] expand: /var/log/radius/radacct/sql-relay -> /var/log/radius/radacct/sql-relay
++[sql_log] = ok
++[exec] = noop
[attr_filter.accounting_response] expand: %{User-Name} -> HSI/DEU.MYID.47110815
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] = updated
+} # group accounting = updated
Sending Accounting-Response of id 17 to 212.88.155.47 port 62146
Finished request 2.
Cleaning up request 2 ID 17 with timestamp +140
Going to the next request
Waking up in 3.4 seconds.
Cleaning up request 0 ID 14 with timestamp +138
Ready to process requests.
More information about the Freeradius-Users
mailing list