freeRadius dynamic vlan unifi AP

[Jan-Christoph Fuchs]

Hi Brian,
thanks for your fast reply,

My AP: Unifi AP AC Pro (it is round) Version 3.4.14.3413 (I am confused, I made upgrade via Controller yesterday so firmwareversion should be 3.7.xxx)

My Controller: 5.3.11

My AP seems to have the same chipset like your Unifi AP AC Lite.
https://wiki.openwrt.org/toh/ubiquiti/unifiac <https://wiki.openwrt.org/toh/ubiquiti/unifiac>

I am not at my site actually. I will grep driver /etc/aaa*.cfg on Tuesday.

Thanks
Jan





> Am 11.02.2017 um 18:34 schrieb Brian Candler <b.candler at pobox.com>:
> 
> On 11/02/2017 17:01, Jan-Christoph Fuchs wrote:
>> Now I have changed to Unifi AP (Unifi Security Gateway Pro, Unifi Switch US-24 POE Unifi AP Pro) and the dynamic VLAN assignment will not work anymore. When I try to connect to the WPA2 Enterprise WLAN, credentials are accepted but I always been put to default VLAN.
> 
> Which exact model of AP?  Also, are you running with 3.7.x firmware and configured with the 5.x controller?
> 
> I had this working with the 1st gen Unifi Pro (the round one). But when I tried with the Unifi Pro AC (square one), it ignored the attributes. I reported the problem but didn't get any response:
> 
> https://community.ubnt.com/t5/UniFi-Wireless/UAP-AC-and-dynamic-VLAN-assignment/m-p/1703212
> 
> I suspect it's a chipset difference. Try ssh'ing into your AP, and doing
> 
> grep driver /etc/aaa*.cfg
> 
> I think I saw "broadcom" for the Pro AC, but "atheros" for the Pro.
> 
> I also now have a Unifi AC Lite (also "atheros") and that works fine:
> 
> 17:32:05.943220 f8:e0:79:39:9e:6c > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 360: vlan 255, p 0, ethertype IPv4, 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from f8:e0:79:39:9e:6c, length 314
> 
> 
>