new freeradius setup

[Andrew Meyer]

Alan,
My apologies.  Yahoo defaults to Rich Text and there is no way to set the default to plain text that I can see.
However here is my output in plain text.  Hope this is legible now.

So I also added a client config and told it to allow my network to have the ability to communicate w/ FreeRADIUS.  
Tue Oct 24 21:17:58 2017 : Auth: (0) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [bob/hello] (from client ASM port 0)
Tue Oct 24 21:18:04 2017 : Auth: (1) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [bob/hello] (from client ASM port 0)



On Wednesday, October 25, 2017 5:31 AM, Alan DeKok <aland at deployingradius.com> wrote:




> On Oct 24, 2017, at 9:27 PM, Andrew Meyer via Freeradius-Users <freeradius-users at lists.freeradius.org> wrote:
> 
> Ok, I did what you said, I started fresh.
> The only thing I have put in the /etc/raddb/radiusd.conf is a listen directive.  So now in the logs i'm getting this:
> Tue Oct 24 20:26:54 2017 : Error: Ignoring request to auth address 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto udpTue Oct 24 20:26:59 2017 : Error: Ignoring request to auth address 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto udpTue Oct 24 20:27:04 2017 : Error: Ignoring request to auth address 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto udp]

  You've been told repeatedly to fix your messages so that the contents aren't mangled.  Despite that, you're still not following instructions.

  If you don't care enough to post READABLE logs, I don't care to answer your questions.


  Alan DeKok.