Migrating configuration. Users file
jan hugo prins
jhp at jhprins.org
Thu Sep 21 18:32:07 CEST 2017
Attachement was not inline.
Lets just put it inline.
FreeRADIUS Version 3.0.15
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/ldap
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/cache
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/preprocess
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/policy.conf
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/control
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/betterbe
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
realm betterbe.com {
nostrip
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client aruba01 {
ipaddr = 172.30.20.47
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client pppoe {
ipaddr = 172.30.20.48
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client radius01 {
ipaddr = 172.30.20.16
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client radius02 {
ipaddr = 172.30.20.17
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client infranode01 {
ipaddr = 172.30.20.52
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client infranode02 {
ipaddr = 172.30.20.53
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client tc03st01sw1 {
ipaddr = 192.168.202.41
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client av140st01 {
ipaddr = 192.168.202.40
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client tc03st02sw1 {
ipaddr = 192.168.202.61
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client inframon01 {
ipaddr = 172.30.20.10
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client inframon02 {
ipaddr = 172.30.20.11
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client inframon03 {
ipaddr = 172.30.20.18
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_ldap
# Loading module "betterbe" from file /etc/raddb/mods-enabled/ldap
ldap betterbe {
server = "ldap.svc.be.nl"
sasl {
}
edir = no
edir_autz = no
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_filter =
"(&(objectClass=posixGroup)(memberUid=%{Stripped-User-Name}))"
cacheable_name = no
cacheable_dn = no
}
client {
scope = "sub"
base_dn = ""
}
profile {
}
options {
ldap_debug = 0
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
start_tls = no
}
}
Creating attribute betterbe-LDAP-Group
# Loading module "tcwifi" from file /etc/raddb/mods-enabled/ldap
ldap tcwifi {
server = "ldap.svc.be.nl"
sasl {
}
edir = no
edir_autz = no
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_filter =
"(&(objectClass=posixGroup)(memberUid=%{Stripped-User-Name}))"
cacheable_name = no
cacheable_dn = no
}
client {
scope = "sub"
base_dn = ""
}
profile {
}
options {
ldap_debug = 0
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
start_tls = no
}
}
Creating attribute tcwifi-LDAP-Group
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "tls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
# Loaded module rlm_detail
# Loading module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
usersfile = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_cache
# Loading module "cache" from file /etc/raddb/mods-enabled/cache
cache {
driver = "rlm_cache_rbtree"
key = "%{User-Name}"
ttl = 10
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_exec
# Loading module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_pap
# Loading module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_date
# Loading module "date" from file /etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/raddb/mods-enabled/chap
# Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_always
# Loading module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
instantiate {
}
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
# Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm
"DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "betterbe" from file /etc/raddb/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20444
rlm_ldap (betterbe): Couldn't find configuration for accounting, will
return NOOP for calls from this section
rlm_ldap (betterbe): Couldn't find configuration for post-auth, will
return NOOP for calls from this section
rlm_ldap (betterbe): Initialising connection pool
pool {
start = 5
min = 5
max = 10
spare = 3
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 1
spread = no
}
rlm_ldap (betterbe): Opening additional connection (0), 1 of 10 pending
slots used
rlm_ldap (betterbe): Connecting to ldap://ldap.svc.be.nl:389
rlm_ldap (betterbe): Waiting for bind result...
rlm_ldap (betterbe): Bind successful
rlm_ldap (betterbe): Opening additional connection (1), 1 of 9 pending
slots used
rlm_ldap (betterbe): Connecting to ldap://ldap.svc.be.nl:389
rlm_ldap (betterbe): Waiting for bind result...
rlm_ldap (betterbe): Bind successful
rlm_ldap (betterbe): Opening additional connection (2), 1 of 8 pending
slots used
rlm_ldap (betterbe): Connecting to ldap://ldap.svc.be.nl:389
rlm_ldap (betterbe): Waiting for bind result...
rlm_ldap (betterbe): Bind successful
rlm_ldap (betterbe): Opening additional connection (3), 1 of 7 pending
slots used
rlm_ldap (betterbe): Connecting to ldap://ldap.svc.be.nl:389
rlm_ldap (betterbe): Waiting for bind result...
rlm_ldap (betterbe): Bind successful
rlm_ldap (betterbe): Opening additional connection (4), 1 of 6 pending
slots used
rlm_ldap (betterbe): Connecting to ldap://ldap.svc.be.nl:389
rlm_ldap (betterbe): Waiting for bind result...
rlm_ldap (betterbe): Bind successful
# Instantiating module "tcwifi" from file /etc/raddb/mods-enabled/ldap
rlm_ldap (tcwifi): Couldn't find configuration for accounting, will
return NOOP for calls from this section
rlm_ldap (tcwifi): Couldn't find configuration for post-auth, will
return NOOP for calls from this section
rlm_ldap (tcwifi): Initialising connection pool
pool {
start = 5
min = 5
max = 10
spare = 3
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 1
spread = no
}
rlm_ldap (tcwifi): Opening additional connection (0), 1 of 10 pending
slots used
rlm_ldap (tcwifi): Connecting to ldap://ldap.svc.be.nl:389
rlm_ldap (tcwifi): Waiting for bind result...
rlm_ldap (tcwifi): Bind successful
rlm_ldap (tcwifi): Opening additional connection (1), 1 of 9 pending
slots used
rlm_ldap (tcwifi): Connecting to ldap://ldap.svc.be.nl:389
rlm_ldap (tcwifi): Waiting for bind result...
rlm_ldap (tcwifi): Bind successful
rlm_ldap (tcwifi): Opening additional connection (2), 1 of 8 pending
slots used
rlm_ldap (tcwifi): Connecting to ldap://ldap.svc.be.nl:389
rlm_ldap (tcwifi): Waiting for bind result...
rlm_ldap (tcwifi): Bind successful
rlm_ldap (tcwifi): Opening additional connection (3), 1 of 7 pending
slots used
rlm_ldap (tcwifi): Connecting to ldap://ldap.svc.be.nl:389
rlm_ldap (tcwifi): Waiting for bind result...
rlm_ldap (tcwifi): Bind successful
rlm_ldap (tcwifi): Opening additional connection (4), 1 of 6 pending
slots used
rlm_ldap (tcwifi): Connecting to ldap://ldap.svc.be.nl:389
rlm_ldap (tcwifi): Waiting for bind result...
rlm_ldap (tcwifi): Bind successful
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
ca_file = "/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/raddb/certs/dh2048.pem"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
check_cert_cn = "%{User-Name}"
cipher_list =
"ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!3DES:!MD5:!PSK"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = no
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = yes
use_tunneled_reply = no
virtual_server = "inner-tunnel-betterbe"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = yes
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel-betterbe"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
# Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Instantiating module "cache" from file /etc/raddb/mods-enabled/cache
rlm_cache (cache): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
# Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
# Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
# Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/betterbe
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading pre-proxy {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel-betterbe { # from file /etc/raddb/sites-enabled/betterbe
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading pre-proxy {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel-betterbe
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server
inner-tunnel-betterbe
Ready to process requests
(0) Received Access-Request Id 30 from 172.30.20.47:51209 to
172.30.20.22:1812 length 210
(0) NAS-IP-Address = 172.30.27.1
(0) NAS-Port = 0
(0) NAS-Port-Type = Wireless-802.11
(0) User-Name = "jprins at betterbe.com"
(0) Service-Type = Login-User
(0) Calling-Station-Id = "0.0.0.0"
(0) Called-Station-Id = "000B86B798F7"
(0) MS-CHAP-Challenge = 0x03149e4ad8879031d0430f0d6c372268
(0) MS-CHAP2-Response =
0x0000369995e2e57a8779b6c14bc6514e34250000000000000000549cd2bd59355c8b53f05461d806198484d3dbf886af35f4
(0) Aruba-Location-Id = "N/A"
(0) Aruba-AP-Group = "N/A"
(0) Message-Authenticator = 0x17d68338287db939d0496243403b9bbf
(0) # Executing section authorize from file
/etc/raddb/sites-enabled/betterbe
(0) authorize {
(0) policy optional_realm {
(0) if (User-Name =~ /(.+)@(.+)/) {
(0) if (User-Name =~ /(.+)@(.+)/) -> TRUE
(0) if (User-Name =~ /(.+)@(.+)/) {
(0) update request {
(0) EXPAND %{1}
(0) --> jprins
(0) &Stripped-User-Name := jprins
(0) EXPAND %{tolower:%{2}}
(0) --> betterbe.com
(0) &Realm = betterbe.com
(0) } # update request = noop
(0) [updated] = updated
(0) } # if (User-Name =~ /(.+)@(.+)/) = updated
(0) ... skipping else: Preceding "if" was taken
(0) } # policy optional_realm = updated
(0) [preprocess] = ok
(0) auth_log: EXPAND
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(0) auth_log: -->
/var/log/radius/radacct/172.30.20.47/auth-detail-20170921
(0) auth_log:
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/radius/radacct/172.30.20.47/auth-detail-20170921
(0) auth_log: EXPAND %t
(0) auth_log: --> Thu Sep 21 18:12:15 2017
(0) [auth_log] = ok
(0) [chap] = noop
(0) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
(0) [mschap] = ok
(0) [digest] = noop
(0) suffix: Request already has destination realm set. Ignoring
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) [files] = noop
(0) if ( Realm == "betterbe.com" ) {
(0) if ( Realm == "betterbe.com" ) -> TRUE
(0) if ( Realm == "betterbe.com" ) {
rlm_ldap (betterbe): Reserved connection (0)
(0) betterbe: EXPAND (mailLocalAddress=%{User-Name})
(0) betterbe: --> (mailLocalAddress=jprins at betterbe.com)
(0) betterbe: Performing search in "ou=better.be,dc=betterbe,dc=com"
with filter "(mailLocalAddress=jprins at betterbe.com)", scope "sub"
(0) betterbe: Waiting for search result...
(0) betterbe: User object found at DN
"cn=jprins,ou=Users,ou=Better.be,dc=betterbe,dc=com"
(0) betterbe: Processing user attributes
(0) betterbe: control:NT-Password :=
0x4441363434333737304643363235333537343731443945353931314144373637
(0) betterbe: control:LM-Password :=
0x4234383933444442334443444145414638423045413541374446313335423033
rlm_ldap (betterbe): Released connection (0)
(0) [betterbe] = updated
(0) } # if ( Realm == "betterbe.com" ) = updated
(0) if ( Realm == "transportcentrum.wifi" ) {
(0) if ( Realm == "transportcentrum.wifi" ) -> FALSE
(0) [expiration] = noop
(0) [logintime] = noop
(0) pap: Normalizing NT-Password from hex encoding, 32 bytes -> 16 bytes
(0) pap: Normalizing LM-Password from hex encoding, 32 bytes -> 16 bytes
(0) pap: WARNING: Auth-Type already set. Not setting to PAP
(0) [pap] = noop
(0) } # authorize = updated
(0) Found Auth-Type = MS-CHAP
(0) # Executing group from file /etc/raddb/sites-enabled/betterbe
(0) Auth-Type MS-CHAP {
(0) mschap: Found NT-Password
(0) mschap: Found LM-Password
(0) mschap: Creating challenge hash with username: jprins at betterbe.com
(0) mschap: Client is using MS-CHAPv2
(0) mschap: Adding MS-CHAPv2 MPPE keys
(0) [mschap] = ok
(0) } # Auth-Type MS-CHAP = ok
(0) # Executing section post-auth from file
/etc/raddb/sites-enabled/betterbe
(0) post-auth {
(0) update {
(0) No attributes updated
(0) } # update = noop
(0) reply_log: EXPAND
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d
(0) reply_log: -->
/var/log/radius/radacct/172.30.20.47/reply-detail-20170921
(0) reply_log:
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d
expands to /var/log/radius/radacct/172.30.20.47/reply-detail-20170921
(0) reply_log: EXPAND %t
(0) reply_log: --> Thu Sep 21 18:12:15 2017
(0) [reply_log] = ok
(0) [exec] = noop
(0) update reply {
(0) EXPAND %{TLS-Cert-Serial}
(0) -->
(0) &Reply-Message +=
(0) EXPAND %{TLS-Cert-Expiration}
(0) -->
(0) &Reply-Message +=
(0) EXPAND %{TLS-Cert-Subject}
(0) -->
(0) &Reply-Message +=
(0) EXPAND %{TLS-Cert-Issuer}
(0) -->
(0) &Reply-Message +=
(0) EXPAND %{TLS-Cert-Common-Name}
(0) -->
(0) &Reply-Message +=
(0) EXPAND %{TLS-Cert-Subject-Alt-Name-Email}
(0) -->
(0) &Reply-Message +=
(0) EXPAND %{TLS-Client-Cert-Serial}
(0) -->
(0) &Reply-Message +=
(0) EXPAND %{TLS-Client-Cert-Expiration}
(0) -->
(0) &Reply-Message +=
(0) EXPAND %{TLS-Client-Cert-Subject}
(0) -->
(0) &Reply-Message +=
(0) EXPAND %{TLS-Client-Cert-Issuer}
(0) -->
(0) &Reply-Message +=
(0) EXPAND %{TLS-Client-Cert-Common-Name}
(0) -->
(0) &Reply-Message +=
(0) EXPAND %{TLS-Client-Cert-Subject-Alt-Name-Email}
(0) -->
(0) &Reply-Message +=
(0) } # update reply = noop
(0) } # post-auth = ok
(0) Sent Access-Accept Id 30 from 172.30.20.22:1812 to
172.30.20.47:51209 length 0
(0) MS-CHAP2-Success =
0x00533d35433731413646333730393746314238333844444532364443394133383341353042384138453846
(0) MS-MPPE-Recv-Key = 0xefa3bfa6d21ed431a4d4df07e49e8553
(0) MS-MPPE-Send-Key = 0x86ce295bd32908709066864538d00b8f
(0) MS-MPPE-Encryption-Policy = Encryption-Allowed
(0) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(0) Reply-Message += ""
(0) Reply-Message += ""
(0) Reply-Message += ""
(0) Reply-Message += ""
(0) Reply-Message += ""
(0) Reply-Message += ""
(0) Reply-Message += ""
(0) Reply-Message += ""
(0) Reply-Message += ""
(0) Reply-Message += ""
(0) Reply-Message += ""
(0) Reply-Message += ""
(0) Finished request
Waking up in 4.9 seconds.
On 09/21/2017 06:18 PM, jan hugo prins wrote:
> Hello,
>
> In my version 2 config I had a users file that was working fine.
> In my version 3 config I have moved the content of this file to
> mods-config/files/authorize
>
> My huntsgroup file is working, or at least I see Huntgroup-Name
> attribute in my Auth-Detail logging.
>
> there are a few things I don't see at the moment and they are all
> related to my users /authorize file:
>
> - User to group mappings.
> - Aruba attributes are not added to an authenticated user
> - Users in my users file (phones etc) are not able to authenticate.
>
>
> In version 2 I had use_tunneled_reply = yes in my config.
> In version 3 this is depricated and now I have to do something with
> update outer.session-state in my inner-tunnel config.
>
> In version 2 I had to add some information regarding groups to the
> /etc/raddb/dictionary file. This file is in my config tree, but I have
> the idea that it is not being accessed.
>
> What could I be missing?
> Attached is my radiusd -X output file.
>
>
> Jan Hugo Prins
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list