PAM missing in FreeRadius 3 w/ Debian 9

[Eero Volotinen]

so, run something like ln -sf source target on root

ex: ln -sf /etc/freeradius/mods-available/pam /etc/freeradius/mods-
enabled/pam

On Mon, Apr 23, 2018 at 9:01 PM, Eero Volotinen <eero.volotinen at iki.fi>
wrote:

> You need to link that file under mods-enabled to enable pam support and
> then restart freeradius
>
> Eero
>
> On Mon, Apr 23, 2018 at 6:54 PM, <servernemesis at tutanota.com> wrote:
>
>> @Eero : /etc/freeradius/mods-available/pam
>>
>> I just reinstalled it by building the packages (
>> https://wiki.freeradius.org/building/Debian%20and%20Ubuntu <
>> https://wiki.freeradius.org/building/Debian%20and%20Ubuntu>) but same
>> problem :/
>>
>>
>> 23. Avr 2018 17:02 de eero.volotinen at iki.fi <mailto:eero.volotinen at iki.fi
>> >:
>>
>>
>> > what is output of find /etc/freeradius -type f -iname '*pam*' -print ?
>> >
>> > Eero
>> >
>> > ma 23. huhtik. 2018 klo 15.18 <> servernemesis at tutanota.com <mailto:
>> servernemesis at tutanota.com>> > kirjoitti:
>> >
>> >>
>> >> Hello,
>> >>
>> >>
>> >>
>> >>
>> >> I just installed FreeRadius 3.0.12 on Stretch in order to provide a
>> Google
>> >> Authenticator gateway (
>> >> https://www.techdrabble.com/citrix/14-2factor-with-google-au
>> thenticator-and-netscaler <https://www.techdrabble.com/c
>> itrix/14-2factor-with-google-authenticator-and-netscaler>
>> >> <
>> >> https://www.techdrabble.com/citrix/14-2factor-with-google-au
>> thenticator-and-netscaler <https://www.techdrabble.com/c
>> itrix/14-2factor-with-google-authenticator-and-netscaler>>> >),
>> >> but I'm unable to start the FreeRadius service, here is the debug log :
>> >>
>> >>
>> >>
>> >>
>> >> Mon Apr 23 14:23:59 2018 : Debug:  # Loading session {...}
>> >> Mon Apr 23 14:23:59 2018 : Debug:   radutmp
>> >> Mon Apr 23 14:23:59 2018 : Debug:  # Loading post-proxy {...}
>> >> Mon Apr 23 14:23:59 2018 : Debug:   eap
>> >> Mon Apr 23 14:23:59 2018 : Debug:  # Loading post-auth {...}
>> >> Mon Apr 23 14:23:59 2018 : Debug: } # server inner-tunnel
>> >> Mon Apr 23 14:23:59 2018 : Debug: server default { # from file
>> >> /etc/freeradius/3.0/sites-enabled/default
>> >> Mon Apr 23 14:23:59 2018 : Debug:  # Loading authenticate {...}
>> >> Mon Apr 23 14:23:59 2018 : Debug:   mschap
>> >> Mon Apr 23 14:23:59 2018 : Debug:   digest
>> >> Mon Apr 23 14:23:59 2018 : Error:
>> >> /etc/freeradius/3.0/sites-enabled/default[489]: Failed to find "pam"
>> as a
>> >> module or policy.
>> >> Mon Apr 23 14:23:59 2018 : Error:
>> >> /etc/freeradius/3.0/sites-enabled/default[489]: Please verify that the
>> >> configuration exists in /etc/freeradius/3.0$
>> >> Mon Apr 23 14:23:59 2018 : Error:
>> >> /etc/freeradius/3.0/sites-enabled/default[452]: Errors parsing
>> authenticate
>> >> section.
>> >>
>> >>
>> >>
>> >> Of course there is no "/etc/freeradius/3.0/mods-enabled/pam"
>> >>
>> >>
>> >>
>> >>
>> >> Someone had the same problem with Ubuntu 17.10 and FreeRadius 3 before
>> >> reverting to an older version (
>> >> https://enterpriseadmins.org/blog/virtualization/build-your-
>> own-two-factor-authentication-server <https://enterpriseadmins.org/
>> blog/virtualization/build-your-own-two-factor-authentication-server/>
>> >> <
>> >> https://enterpriseadmins.org/blog/virtualization/build-your-
>> own-two-factor-authentication-server <https://enterpriseadmins.org/
>> blog/virtualization/build-your-own-two-factor-authentication-server/>
>> >> >)
>> >>
>> >>
>> >>
>> >>
>> >> Regards
>> >> -
>> >> List info/subscribe/unsubscribe? See
>> >> http://www.freeradius.org/list/users.html <
>> http://www.freeradius.org/list/users.html>
>> > -
>> > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list
>> /users.html <http://www.freeradius.org/list/users.html>
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list
>> /users.html
>>
>
>