Google authenticator : Access-Reject
Eero Volotinen
eero.volotinen at iki.fi
Wed Apr 25 10:11:41 CEST 2018
please, give example of your radtest command.
Eero
ke 25. huhtik. 2018 klo 11.02 <servernemesis at tutanota.com> kirjoitti:
> I'm using the radtest command on localhost with the secret testing123
> (double checked)
>
> 25. Avr 2018 09:55 de eero.volotinen at iki.fi <mailto:eero.volotinen at iki.fi
> >:
>
>
> > well. radius secret can be wrong also for your client.
> >
> > radius secret is in client.conf and its tied to client ip address. check
> it
> > out and test again.
> >
> > anyway. in your config you need use only google code, not password.
> >
> > Eero
> >
> > ke 25. huhtik. 2018 klo 10.49 <> servernemesis at tutanota.com <mailto:
> servernemesis at tutanota.com>> > kirjoitti:
> >
> >> Hello,
> >>
> >> No because if I login with SSH, it works :
> >>
> >> Apr 25 09:45:10 SRV-FREERADIUS sshd(pam_google_authenticator)[1885]:
> >> Accepted google_authenticator for user
> >> Apr 25 09:45:11 SRV-FREERADIUS sshd[1885]: Accepted password for user
> from
> >> 192.168.50.68 port 50020 ssh2
> >> Apr 25 09:45:11 SRV-FREERADIUS sshd[1885]: pam_unix(sshd:session):
> session
> >> opened for user user by (uid=0)
> >> Apr 25 09:45:11 SRV-FREERADIUS systemd-logind[535]: New session 11 of
> user
> >> user.
> >>
> >> I don't get why it's not working with the radius...
> >>
> >> 25. Avr 2018 09:46 de >> eero.volotinen at iki.fi <mailto:
> eero.volotinen at iki.fi>>> <>> mailto:eero.volotinen at iki.fi <mailto:mailto:
> eero.volotinen at iki.fi>
> >> >:
> >>
> >>
> >> > It means that code is wrong? is the server using ntp and clock is sync
> >> and
> >> > mobile is in sync.
> >> >
> >> > Try following: log into user. delete .google* file from user home
> >> directory.
> >> >
> >> > run google-authenticator without params and select time based
> token/auth
> >> > and add new authenticator code to google auth in phone
> >> >
> >> > Eero
> >> >
> >> > ke 25. huhtik. 2018 klo 10.39 <> >> servernemesis at tutanota.com
> <mailto:servernemesis at tutanota.com>>> <mailto:
> >> servernemesis at tutanota.com <mailto:servernemesis at tutanota.com>>> >> >
> kirjoitti:
> >> >
> >> >> PS : If I disable the domain suffix for the users on the server
> (being
> >> >> able to login with just "user"), I get
> >> >>
> >> >> Apr 25 09:27:42 SRV-FREERADIUS
> radiusd(pam_google_authenticator)[1661]:
> >> >> Invalid verification code for user
> >> >>
> >> >>
> >> >> 25. Avr 2018 09:15 de >> >> servernemesis at tutanota.com <mailto:
> servernemesis at tutanota.com>>> <mailto:
> >> servernemesis at tutanota.com <mailto:servernemesis at tutanota.com>>> >>>
> <mailto:
> >> >> >> servernemesis at tutanota.com <mailto:servernemesis at tutanota.com>>>
> <>> mailto:servernemesis at tutanota.com <mailto:mailto:
> servernemesis at tutanota.com>>> >>> >:
> >> >>
> >> >>
> >> >> > I tried
> >> >> >
> >> >> > #
> >> >> > # /etc/pam.d/radiusd - PAM configuration for FreeRADIUS
> >> >> > #
> >> >> >
> >> >> > # We fall back to the system default in /etc/pam.d/common-*
> >> >> > #
> >> >> >
> >> >> > #@include common-auth
> >> >> > #@include common-account
> >> >> > #@include common-password
> >> >> > #@include common-session
> >> >> > auth required /usr/local/lib/security/pam_google_authenticator.so
> >> >> >
> >> >> > and
> >> >> >
> >> >> > #
> >> >> > # /etc/pam.d/radiusd - PAM configuration for FreeRADIUS
> >> >> > #
> >> >> >
> >> >> > # We fall back to the system default in /etc/pam.d/common-*
> >> >> > #
> >> >> >
> >> >> > #@include common-auth
> >> >> > #@include common-account
> >> >> > #@include common-password
> >> >> > #@include common-session
> >> >> > auth requisite /usr/local/lib/security/pam_google_authenticator.so
> >> >> forward_pass
> >> >> > auth required pam_unix.so use_first_pass
> >> >> >
> >> >> > In both cases :
> >> >> >
> >> >> > Apr 25 09:05:43 SRV-FREERADIUS
> >> radiusd(pam_google_authenticator)[6847]:
> >> >> user("user") not found
> >> >> > Apr 25 09:05:43 SRV-FREERADIUS
> >> radiusd(pam_google_authenticator)[6847]:
> >> >> No secret configured for user user, asking for code anyway.
> >> >> > Apr 25 09:05:43 SRV-FREERADIUS
> >> radiusd(pam_google_authenticator)[6847]:
> >> >> Invalid verification code for user
> >> >> >
> >> >> >
> >> >> >
> >> >> > 24. Avr 2018 19:21 de > >> >> eero.volotinen at iki.fi <mailto:
> eero.volotinen at iki.fi>>> <mailto:
> >> eero.volotinen at iki.fi <mailto:eero.volotinen at iki.fi>>> >>> <mailto:
> >> >> >> eero.volotinen at iki.fi <mailto:eero.volotinen at iki.fi>>> <>>
> mailto:eero.volotinen at iki.fi <mailto:mailto:eero.volotinen at iki.fi>>> >>>
> >> :
> >> >> >
> >> >> >
> >> >> >> You need to enable pam logging on google authenticator.
> >> >> >>
> >> >> >> what is content of /etc/pam.d/radiusd ?
> >> >> >>
> >> >> >> Eero
> >> >> >>
> >> >> >> ti 24. huhtik. 2018 klo 17.29 <>> >> >>
> servernemesis at tutanota.com <mailto:servernemesis at tutanota.com>
> >> <>> mailto:servernemesis at tutanota.com <mailto:mailto:
> servernemesis at tutanota.com>>> >>> <mailto:
> >> >> >> servernemesis at tutanota.com <mailto:servernemesis at tutanota.com>>>
> <>> mailto:servernemesis at tutanota.com <mailto:mailto:
> servernemesis at tutanota.com>>> >>> >>> >
> >> kirjoitti:
> >> >> >>
> >> >> >>> Thanks, it looks better but it's still failing :
> >> >> >>>
> >> >> >>> Ready to process requests
> >> >> >>> (0) Received Access-Request Id 113 from 127.0.0.1:34793 to
> >> >> 127.0.0.1:1812
> >> >> >>> length 92
> >> >> >>> (0) User-Name = ">>> >> >> user at mydomain.com <mailto:
> user at mydomain.com>>> <mailto:
> >> user at mydomain.com <mailto:user at mydomain.com>>> >>> <>> >> mailto:
> user at mydomain.com <mailto:mailto:user at mydomain.com>>> <mailto:mailto:
> >> user at mydomain.com <mailto:user at mydomain.com>>> >>> >>>>
> >> >> <>>> >> >> mailto:user at mydomain.com <mailto:mailto:user at mydomain.com>>>
> <>> mailto:mailto:user at mydomain.com <mailto:mailto:mailto:
> user at mydomain.com>>> >>>
> >> <>> >> mailto:mailto:user at mydomain.com <mailto:mailto:mailto:
> user at mydomain.com>>> <mailto:mailto:mailto:
> >> user at mydomain.com <mailto:user at mydomain.com>>> >>> >>>> >"
> >> >> >>> (0) User-Password = "password123456"
> >> >> >>> (0) NAS-IP-Address = 127.0.1.1
> >> >> >>> (0) NAS-Port = 18120
> >> >> >>> (0) Message-Authenticator = 0xd028fefb31c1de33ebec1d53011953ce
> >> >> >>> (0) # Executing section authorize from file
> >> >> >>> /etc/freeradius/3.0/sites-enabled/default
> >> >> >>> (0) authorize {
> >> >> >>> (0) policy filter_username {
> >> >> >>> (0) if (&User-Name) {
> >> >> >>> (0) if (&User-Name) -> TRUE
> >> >> >>> (0) if (&User-Name) {
> >> >> >>> (0) if (&User-Name =~ / /) {
> >> >> >>> (0) if (&User-Name =~ / /) -> FALSE
> >> >> >>> (0) if (&User-Name =~ /@[^@]*@/ ) {
> >> >> >>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> >> >> >>> (0) if (&User-Name =~ /\.\./ ) {
> >> >> >>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
> >> >> >>> (0) if ((&User-Name =~ /@/) && (&User-Name !~
> >> >> /@(.+)\.(.+)$/)) {
> >> >> >>> (0) if ((&User-Name =~ /@/) && (&User-Name !~
> >> /@(.+)\.(.+)$/))
> >> >> >>> -> FALSE
> >> >> >>> (0) if (&User-Name =~ /\.$/) {
> >> >> >>> (0) if (&User-Name =~ /\.$/) -> FALSE
> >> >> >>> (0) if (&User-Name =~ /@\./) {
> >> >> >>> (0) if (&User-Name =~ /@\./) -> FALSE
> >> >> >>> (0) } # if (&User-Name) = notfound
> >> >> >>> (0) } # policy filter_username = notfound
> >> >> >>> (0) [preprocess] = ok
> >> >> >>> (0) [chap] = noop
> >> >> >>> (0) [mschap] = noop
> >> >> >>> (0) [digest] = noop
> >> >> >>> (0) suffix: Checking for suffix after "@"
> >> >> >>> (0) suffix: Looking up realm "mydomain.com" for User-Name = "
> >> >> >>> >> >> user at mydomain.com <mailto:user at mydomain.com>>> <>>
> mailto:user at mydomain.com <mailto:mailto:user at mydomain.com>>> >>> <>>
> mailto:
> >> user at mydomain.com <mailto:user at mydomain.com>>> <>> mailto:mailto:
> user at mydomain.com <mailto:mailto:mailto:user at mydomain.com>>> >>> >>>>
> <>>> mailto:
> >> >> >> user at mydomain.com <mailto:user at mydomain.com>>> <>> mailto:
> user at mydomain.com <mailto:mailto:user at mydomain.com>>> >>> <>> mailto:
> mailto:
> >> user at mydomain.com <mailto:user at mydomain.com>>> <>> mailto:mailto
> :mailto:user at mydomain.com <mailto:mailto:mailto:mailto:user at mydomain.com>>>
> >>> >>>> >"
> >> >> >>> (0) suffix: Found realm "mydomain.com"
> >> >> >>> (0) suffix: Adding Stripped-User-Name = "user"
> >> >> >>> (0) suffix: Adding Realm = "mydomain.com"
> >> >> >>> (0) suffix: Authentication realm is LOCAL
> >> >> >>> (0) [suffix] = ok
> >> >> >>> (0) eap: No EAP-Message, not doing EAP
> >> >> >>> (0) [eap] = noop
> >> >> >>> (0) files: users: Matched entry DEFAULT at line 221
> >> >> >>> (0) [files] = ok
> >> >> >>> (0) [expiration] = noop
> >> >> >>> (0) [logintime] = noop
> >> >> >>> (0) pap: WARNING: No "known good" password found for the user.
> Not
> >> >> >>> setting Auth-Type
> >> >> >>> (0) pap: WARNING: Authentication will fail unless a "known good"
> >> >> password
> >> >> >>> is available
> >> >> >>> (0) [pap] = noop
> >> >> >>> (0) } # authorize = ok
> >> >> >>> (0) Found Auth-Type = pam
> >> >> >>> (0) # Executing group from file
> >> >> /etc/freeradius/3.0/sites-enabled/default
> >> >> >>> (0) authenticate {
> >> >> >>> (0) pam: Using pamauth string "radiusd" for pam.conf lookup
> >> >> >>> (0) pam: ERROR: pam_authenticate failed: Authentication failure
> >> >> >>> (0) [pam] = reject
> >> >> >>> (0) } # authenticate = reject
> >> >> >>> (0) Failed to authenticate the user
> >> >> >>> (0) Using Post-Auth-Type Reject
> >> >> >>> (0) # Executing group from file
> >> >> /etc/freeradius/3.0/sites-enabled/default
> >> >> >>> (0) Post-Auth-Type REJECT {
> >> >> >>> (0) attr_filter.access_reject: EXPAND %{User-Name}
> >> >> >>> (0) attr_filter.access_reject: --> >>> >> >>
> user at mydomain.com <mailto:user at mydomain.com>
> >> <>> mailto:user at mydomain.com <mailto:mailto:user at mydomain.com>>> >>>
> <mailto:
> >> >> >> user at mydomain.com <mailto:user at mydomain.com>>> <>> mailto:
> user at mydomain.com <mailto:mailto:user at mydomain.com>>> >>> >>>> <mailto:
> >> >> >>> >> >> user at mydomain.com <mailto:user at mydomain.com>>> <>>
> mailto:user at mydomain.com <mailto:mailto:user at mydomain.com>>> >>> <>>
> mailto:
> >> user at mydomain.com <mailto:user at mydomain.com>>> <>> mailto:mailto:
> user at mydomain.com <mailto:mailto:mailto:user at mydomain.com>>> >>> >>>> >
> >> >> >>> (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
> >> >> >>> (0) [attr_filter.access_reject] = updated
> >> >> >>> (0) [eap] = noop
> >> >> >>> (0) policy remove_reply_message_if_eap {
> >> >> >>> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
> >> >> >>> (0) if (&reply:EAP-Message && &reply:Reply-Message) ->
> FALSE
> >> >> >>> (0) else {
> >> >> >>> (0) [noop] = noop
> >> >> >>> (0) } # else = noop
> >> >> >>> (0) } # policy remove_reply_message_if_eap = noop
> >> >> >>> (0) } # Post-Auth-Type REJECT = updated
> >> >> >>> (0) Delaying response for 1.000000 seconds
> >> >> >>> Waking up in 0.3 seconds.
> >> >> >>> Waking up in 0.6 seconds.
> >> >> >>> (0) Sending delayed response
> >> >> >>> (0) Sent Access-Reject Id 113 from 127.0.0.1:1812 to
> >> 127.0.0.1:34793
> >> >> >>> length 20
> >> >> >>> Waking up in 3.9 seconds.
> >> >> >>> (0) Cleaning up request packet ID 113 with timestamp +11
> >> >> >>> Ready to process requests
> >> >> >>>
> >> >> >>>
> >> >> >>> 24. Avr 2018 16:40 de >>> >> >> aland at deployingradius.com
> <mailto:aland at deployingradius.com>>> <mailto:
> >> aland at deployingradius.com <mailto:aland at deployingradius.com>>> >>>
> <mailto:
> >> >> >> aland at deployingradius.com <mailto:aland at deployingradius.com>>>
> <>> mailto:aland at deployingradius.com <mailto:mailto:
> aland at deployingradius.com>>> >>> >>>>
> >> <mailto:
> >> >> >>> >> >> aland at deployingradius.com <mailto:
> aland at deployingradius.com>>> <>> mailto:aland at deployingradius.com
> <mailto:mailto:aland at deployingradius.com>>> >>>
> >> <>> >> mailto:aland at deployingradius.com <mailto:mailto:
> aland at deployingradius.com>>> <mailto:mailto:
> >> aland at deployingradius.com <mailto:aland at deployingradius.com>>> >>>
> >>>> >:
> >> >> >>>
> >> >> >>>
> >> >> >>> > On Apr 24, 2018, at 10:23 AM, <> >>> >>
> >> servernemesis at tutanota.com <mailto:servernemesis at tutanota.com>>> <>>
> mailto:servernemesis at tutanota.com <mailto:mailto:
> servernemesis at tutanota.com>>> >
> >> >> <>> >> mailto:servernemesis at tutanota.com <mailto:mailto:
> servernemesis at tutanota.com>>> <mailto:mailto:
> >> servernemesis at tutanota.com <mailto:servernemesis at tutanota.com>>> >>>
> >>>> <mailto:
> >> >> >>> >> >> servernemesis at tutanota.com <mailto:
> servernemesis at tutanota.com>>> <>> mailto:servernemesis at tutanota.com
> <mailto:mailto:servernemesis at tutanota.com>>> >>>
> >> <>> >> mailto:servernemesis at tutanota.com <mailto:mailto:
> servernemesis at tutanota.com>>> <mailto:mailto:
> >> servernemesis at tutanota.com <mailto:servernemesis at tutanota.com>>> >>>
> >>>> >>
> >> >> > <> >>> >> >> servernemesis at tutanota.com <mailto:
> servernemesis at tutanota.com>>> <mailto:
> >> servernemesis at tutanota.com <mailto:servernemesis at tutanota.com>>> >>>
> <>> >> mailto:servernemesis at tutanota.com <mailto:mailto:
> servernemesis at tutanota.com>
> >> <>> mailto:mailto:servernemesis at tutanota.com <mailto:mailto:mailto:
> servernemesis at tutanota.com>>> >>> >>>>
> >> >> <mailto:
> >> >> >>> >> >> servernemesis at tutanota.com <mailto:
> servernemesis at tutanota.com>>> <>> mailto:servernemesis at tutanota.com
> <mailto:mailto:servernemesis at tutanota.com>>> >>>
> >> <>> >> mailto:servernemesis at tutanota.com <mailto:mailto:
> servernemesis at tutanota.com>>> <mailto:mailto:
> >> servernemesis at tutanota.com <mailto:servernemesis at tutanota.com>>> >>>
> >>>> >>
> >> >> > wrote:
> >> >> >>> >>
> >> >> >>> >> My FR server is domain joined, and his krb5 realm is
> >> mydomain.com
> >> >> >>> >> I don't know where I could specify the domain for PAM.
> >> >> >>> >
> >> >> >>> > I didn't tell you to specify the domain for PAM.
> >> >> >>> >
> >> >> >>> >> I'm not sure what you mean by "If it doesn't know about the
> >> domain,
> >> >> >>> then add a realm for "mydomain.com". Make it LOCAL (see
> >> proxy.conf)."
> >> >> >>> >> Should I edit the /etc/pam.d/radiusd ? What's proxy.conf ?
> >> >> >>> >
> >> >> >>> > You know you're on the FreeRADIUS mailing list, right?
> >> proxy.conf
> >> >> is
> >> >> >>> for FreeRADIUS, not PAM.
> >> >> >>> >
> >> >> >>> > No, don't edit the /etc/pam.d/radiusd file. If I had meant
> to
> >> edit
> >> >> >>> that file, I would have told you to edit that file.
> >> >> >>> >
> >> >> >>> > Look in the /etc/raddb (or on debian / Ubuntu)
> /etc/freeradius
> >> >> >>> directory. The proxy.conf file is there. Read it.
> >> >> >>> >
> >> >> >>> > Alan DeKok.
> >> >> >>> >
> >> >> >>> >
> >> >> >>> > -
> >> >> >>> > List info/subscribe/unsubscribe? See >
> >> >> >>> >> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> <
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> >>> <
> >> >> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> <
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> >>> >>>> <
> >> >> >>> >> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> <
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> >>> <
> >> >> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> <
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> >>> >>>> >
> >> >> >>> -
> >> >> >>> List info/subscribe/unsubscribe? See
> >> >> >>> >> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> <
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> >>> <
> >> >> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> <
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> >>> >
> >> >> >> -
> >> >> >> List info/subscribe/unsubscribe? See >>
> >> >> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> <
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> >>> <
> >> >> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> <
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> >>> >
> >> >> -
> >> >> List info/subscribe/unsubscribe? See
> >> >> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> <
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> >
> >> > -
> >> > List info/subscribe/unsubscribe? See >
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> <
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>>> >
> >> -
> >> List info/subscribe/unsubscribe? See
> >> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>
> > -
> > List info/subscribe/unsubscribe? See >
> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list