Freeradius 3.0.17 EAP-TLS Authentication with LDAP Authorization
Алексей Морозенко
alexmorozenko at gmail.com
Wed Aug 22 00:01:27 CEST 2018
Are you sure client.pem is right username to ldap search?
—
вт, 21 авг. 2018 г. в 22:30, Kevin Virk <Kevin.Virk at faithlife.com>:
> Hello all I have followed previous advice given to me and upgraded my
> install to FreeRADIUS 3.0.17 . I am trying to achieve a setup where
> computers are let onto company internet via eap-tls and then are separated
> into VLANS with ldap after this. Currently I believe I have eap-tls working
> as my eapol test has been successful. However after adding in the ldap
> module I am getting a bind error which I know is an LDAP error and not a
> freeradius one. I was hoping someone here could take a look at my debug
> info and see if I have overlooked anything. Thank you in advance for the
> help. I also refrenced this previous thread to help out with some of the
> configs
> http://freeradius.1045715.n5.nabble.com/Freeradius-3-x-with-LDAP-authentication-td5746729.html
> .
>
> FreeRADIUS Version 3.0.17
> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/local/share/freeradius/dictionary
> including dictionary file /usr/local/share/freeradius/dictionary.dhcp
> including dictionary file /usr/local/share/freeradius/dictionary.vqp
> including dictionary file /usr/local/etc/raddb/dictionary
> including configuration file /usr/local/etc/raddb/radiusd.conf
> including configuration file /usr/local/etc/raddb/proxy.conf
> including configuration file /usr/local/etc/raddb/clients.conf
> including files in directory /usr/local/etc/raddb/mods-enabled/
> including configuration file /usr/local/etc/raddb/mods-enabled/detail
> including configuration file /usr/local/etc/raddb/mods-enabled/files
> including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
> including configuration file /usr/local/etc/raddb/mods-enabled/mschap
> including configuration file /usr/local/etc/raddb/mods-enabled/realm
> including configuration file /usr/local/etc/raddb/mods-enabled/utf8
> including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
> including configuration file
> /usr/local/etc/raddb/mods-enabled/dynamic_clients
> including configuration file /usr/local/etc/raddb/mods-enabled/digest
> including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
> including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
> including configuration file /usr/local/etc/raddb/mods-enabled/echo
> including configuration file /usr/local/etc/raddb/mods-enabled/linelog
> including configuration file /usr/local/etc/raddb/mods-enabled/eap
> including configuration file /usr/local/etc/raddb/mods-enabled/pap
> including configuration file /usr/local/etc/raddb/mods-enabled/unpack
> including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
> including configuration file /usr/local/etc/raddb/mods-enabled/exec
> including configuration file /usr/local/etc/raddb/mods-enabled/unix
> including configuration file /usr/local/etc/raddb/mods-enabled/logintime
> including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
> including configuration file /usr/local/etc/raddb/mods-enabled/chap
> including configuration file /usr/local/etc/raddb/mods-enabled/soh
> including configuration file /usr/local/etc/raddb/mods-enabled/date
> including configuration file /usr/local/etc/raddb/mods-enabled/always
> including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
> including configuration file /usr/local/etc/raddb/mods-enabled/expr
> including configuration file /usr/local/etc/raddb/mods-enabled/replicate
> including configuration file /usr/local/etc/raddb/mods-enabled/ldap
> including configuration file /usr/local/etc/raddb/mods-enabled/expiration
> including configuration file /usr/local/etc/raddb/mods-enabled/passwd
> including files in directory /usr/local/etc/raddb/policy.d/
> including configuration file /usr/local/etc/raddb/policy.d/cui
> including configuration file /usr/local/etc/raddb/policy.d/accounting
> including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
> including configuration file /usr/local/etc/raddb/policy.d/control
> including configuration file /usr/local/etc/raddb/policy.d/dhcp
> including configuration file /usr/local/etc/raddb/policy.d/eap
> including configuration file /usr/local/etc/raddb/policy.d/operator-name
> including configuration file /usr/local/etc/raddb/policy.d/canonicalization
> including configuration file /usr/local/etc/raddb/policy.d/debug
> including configuration file /usr/local/etc/raddb/policy.d/filter
> including configuration file
> /usr/local/etc/raddb/policy.d/moonshot-targeted-ids
> including files in directory /usr/local/etc/raddb/sites-enabled/
> including configuration file
> /usr/local/etc/raddb/sites-enabled/inner-tunnel
> including configuration file /usr/local/etc/raddb/sites-enabled/default
> main {
> security {
> allow_core_dumps = no
> }
> name = "radiusd"
> prefix = "/usr/local"
> localstatedir = "/usr/local/var"
> logdir = "/usr/local/var/log/radius"
> run_dir = "/usr/local/var/run/radiusd"
> }
> main {
> name = "radiusd"
> prefix = "/usr/local"
> localstatedir = "/usr/local/var"
> sbindir = "/usr/local/sbin"
> logdir = "/usr/local/var/log/radius"
> run_dir = "/usr/local/var/run/radiusd"
> libdir = "/usr/local/lib"
> radacctdir = "/usr/local/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
> checkrad = "/usr/local/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> allow_vulnerable_openssl = "yes"
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client kevintest {
> ipaddr = 172.17.17.227
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost_ipv6 {
> ipv6addr = ::1
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Debugger not attached
> # Creating Auth-Type = ntlm_auth
> # Creating Auth-Type = mschap
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_detail
> # Loading module "detail" from file
> /usr/local/etc/raddb/mods-enabled/detail
> detail {
> filename =
> "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_files
> # Loading module "files" from file
> /usr/local/etc/raddb/mods-enabled/files
> files {
> filename = "/usr/local/etc/raddb/mods-config/files/authorize"
> acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
> preproxy_usersfile =
> "/usr/local/etc/raddb/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_cache
> # Loading module "cache_eap" from file
> /usr/local/etc/raddb/mods-enabled/cache_eap
> cache cache_eap {
> driver = "rlm_cache_rbtree"
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 0
> epoch = 0
> add_stats = no
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file
> /usr/local/etc/raddb/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file
> /usr/local/etc/raddb/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file
> /usr/local/etc/raddb/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file
> /usr/local/etc/raddb/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file
> /usr/local/etc/raddb/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename =
> "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename =
> "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename =
> "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename =
> "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file
> /usr/local/etc/raddb/mods-enabled/dynamic_clients
> # Loaded module rlm_digest
> # Loading module "digest" from file
> /usr/local/etc/raddb/mods-enabled/digest
> # Loaded module rlm_exec
> # Loading module "ntlm_auth" from file
> /usr/local/etc/raddb/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/usr/bin/ntlm_auth --request-nt-key --domain=DOMAIN.net
> --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_radutmp
> # Loading module "radutmp" from file
> /usr/local/etc/raddb/mods-enabled/radutmp
> radutmp {
> filename = "/usr/local/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file
> /usr/local/etc/raddb/mods-enabled/linelog
> linelog {
> filename = "/usr/local/var/log/radius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file
> /usr/local/etc/raddb/mods-enabled/linelog
> linelog log_accounting {
> filename = "/usr/local/var/log/radius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_eap
> # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
> eap {
> default_eap_type = "tls"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_unpack
> # Loading module "unpack" from file
> /usr/local/etc/raddb/mods-enabled/unpack
> # Loading module "auth_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> detail auth_log {
> filename =
> "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> detail reply_log {
> filename =
> "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> detail pre_proxy_log {
> filename =
> "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> detail post_proxy_log {
> filename =
> "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
> unix {
> radwtmp = "/usr/local/var/log/radius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_logintime
> # Loading module "logintime" from file
> /usr/local/etc/raddb/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loading module "sradutmp" from file
> /usr/local/etc/raddb/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/usr/local/var/log/radius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
> # Loaded module rlm_soh
> # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loaded module rlm_date
> # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
> date {
> format = "%b %e %Y %H:%M:%S %Z"
> utc = no
> }
> # Loaded module rlm_always
> # Loading module "reject" from file
> /usr/local/etc/raddb/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file
> /usr/local/etc/raddb/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file
> /usr/local/etc/raddb/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file
> /usr/local/etc/raddb/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file
> /usr/local/etc/raddb/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file
> /usr/local/etc/raddb/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file
> /usr/local/etc/raddb/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file
> /usr/local/etc/raddb/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file
> /usr/local/etc/raddb/mods-enabled/preprocess
> preprocess {
> huntgroups =
> "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
> hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_expr
> # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
> expr {
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file
> /usr/local/etc/raddb/mods-enabled/replicate
> # Loaded module rlm_ldap
> # Loading module "ldap" from file /usr/local/etc/raddb/mods-enabled/ldap
> ldap {
> server = "Domain.net"
> identity =
> "cn=ldap.query,ou=service.accounts,ou=Users,ou=operations,ou=departments,dc=Domain,dc=net"
> password = <<< secret >>>
> sasl {
> }
> user {
> scope = "sub"
> access_positive = yes
> sasl {
> }
> }
> group {
> filter = "(objectClass=posixGroup)"
> scope = "sub"
> name_attribute = "cn"
> membership_attribute = "memberOf"
> cacheable_name = no
> cacheable_dn = no
> }
> client {
> filter = "(objectClass=radiusClient)"
> scope = "sub"
> base_dn = "dc=Domain,dc=net"
> }
> profile {
> }
> options {
> ldap_debug = 40
> chase_referrals = yes
> rebind = yes
> net_timeout = 1
> res_timeout = 10
> srv_timelimit = 3
> idle = 60
> probes = 3
> interval = 3
> }
> tls {
> start_tls = no
> }
> }
> Creating attribute LDAP-Group
> # Loaded module rlm_expiration
> # Loading module "expiration" from file
> /usr/local/etc/raddb/mods-enabled/expiration
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file
> /usr/local/etc/raddb/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> instantiate {
> }
> # Instantiating module "detail" from file
> /usr/local/etc/raddb/mods-enabled/detail
> # Instantiating module "files" from file
> /usr/local/etc/raddb/mods-enabled/files
> reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
> reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
> reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
> # Instantiating module "cache_eap" from file
> /usr/local/etc/raddb/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> loaded and linked
> # Instantiating module "mschap" from file
> /usr/local/etc/raddb/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
> # Instantiating module "IPASS" from file
> /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "suffix" from file
> /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "realmpercent" from file
> /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "ntdomain" from file
> /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "attr_filter.post-proxy" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /usr/local/etc/raddb/mods-config/attr_filter/access_reject
> [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
> [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay-USec" found in filter list for realm
> "DEFAULT".
> # Instantiating module "attr_filter.access_challenge" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
> # Instantiating module "linelog" from file
> /usr/local/etc/raddb/mods-enabled/linelog
> # Instantiating module "log_accounting" from file
> /usr/local/etc/raddb/mods-enabled/linelog
> # Instantiating module "eap" from file
> /usr/local/etc/raddb/mods-enabled/eap
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/usr/local/etc/raddb/certs"
> pem_file_type = yes
> private_key_file = "/usr/local/etc/raddb/certs/server.pem"
> certificate_file = "/usr/local/etc/raddb/certs/server.pem"
> ca_file = "/usr/local/etc/raddb/certs/ca.pem"
> private_key_password = <<< secret >>>
> dh_file = "/usr/local/etc/raddb/certs/dh"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> cipher_list = "HIGH"
> cipher_server_preference = no
> ecdh_curve = "prime256v1"
> tls_max_version = ""
> tls_min_version = "1.0"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> tmpdir = "/tmp/radiusd"
> client = "/usr/bin/openssl verify -CApath
> /usr/local/etc/raddb/certs %{TLS-Client-Cert-Filename}"
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Instantiating module "pap" from file
> /usr/local/etc/raddb/mods-enabled/pap
> # Instantiating module "auth_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
> # Instantiating module "reply_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> # Instantiating module "logintime" from file
> /usr/local/etc/raddb/mods-enabled/logintime
> # Instantiating module "reject" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "fail" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "ok" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "handled" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "invalid" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "userlock" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "notfound" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "noop" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "updated" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "preprocess" from file
> /usr/local/etc/raddb/mods-enabled/preprocess
> reading pairlist file
> /usr/local/etc/raddb/mods-config/preprocess/huntgroups
> reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
> # Instantiating module "ldap" from file
> /usr/local/etc/raddb/mods-enabled/ldap
> rlm_ldap: libldap vendor: OpenLDAP, version: 20442
> accounting {
> reference = "%{tolower:type.%{Acct-Status-Type}}"
> }
> post-auth {
> reference = "."
> }
> rlm_ldap (ldap): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> spread = no
> }
> rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://Domain.net:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://Domain.net:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://Domain.net:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://Domain.net:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://Domain.net:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> # Instantiating module "expiration" from file
> /usr/local/etc/raddb/mods-enabled/expiration
> # Instantiating module "etc_passwd" from file
> /usr/local/etc/raddb/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /usr/local/etc/raddb/radiusd.conf
> } # server
> server inner-tunnel { # from file
> /usr/local/etc/raddb/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> # Skipping contents of 'if' as it is always 'false' --
> /usr/local/etc/raddb/sites-enabled/inner-tunnel:332
> } # server inner-tunnel
> server default { # from file /usr/local/etc/raddb/sites-enabled/default
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server default
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on proxy address * port 36409
> Listening on proxy address :: port 64651
> Ready to process requests
> (0) Received Access-Request Id 0 from 127.0.0.1:36789 to 127.0.0.1:1812
> length 134
> (0) User-Name = "client.pem"
> (0) NAS-IP-Address = 127.0.0.1
> (0) Calling-Station-Id = "02-00-00-00-00-01"
> (0) Framed-MTU = 1400
> (0) NAS-Port-Type = Wireless-802.11
> (0) Service-Type = Framed-User
> (0) Connect-Info = "CONNECT 11Mbps 802.11b"
> (0) EAP-Message = 0x0200000f01636c69656e742e70656d
> (0) Message-Authenticator = 0xd00906a3d0648e3a771145edfd1b9f36
> (0) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (0) authorize {
> (0) policy filter_username {
> (0) if (&User-Name) {
> (0) if (&User-Name) -> TRUE
> (0) if (&User-Name) {
> (0) if (&User-Name =~ / /) {
> (0) if (&User-Name =~ / /) -> FALSE
> (0) if (&User-Name =~ /@[^@]*@/ ) {
> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (0) if (&User-Name =~ /\.\./ ) {
> (0) if (&User-Name =~ /\.\./ ) -> FALSE
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (0) if (&User-Name =~ /\.$/) {
> (0) if (&User-Name =~ /\.$/) -> FALSE
> (0) if (&User-Name =~ /@\./) {
> (0) if (&User-Name =~ /@\./) -> FALSE
> (0) } # if (&User-Name) = notfound
> (0) } # policy filter_username = notfound
> (0) [preprocess] = ok
> (0) auth_log: EXPAND
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> (0) auth_log: --> /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (0) auth_log:
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> expands to /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (0) auth_log: EXPAND %t
> (0) auth_log: --> Tue Aug 21 19:09:39 2018
> (0) [auth_log] = ok
> (0) eap: Peer sent EAP Response (code 2) ID 0 length 15
> (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
> rest of authorize
> (0) [eap] = ok
> (0) } # authorize = ok
> (0) Found Auth-Type = eap
> (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (0) authenticate {
> (0) eap: Peer sent packet with method EAP Identity (1)
> (0) eap: Calling submodule eap_tls to process data
> (0) eap_tls: Initiating new EAP-TLS session
> (0) eap_tls: Setting verify mode to require certificate from client
> (0) eap_tls: [eaptls start] = request
> (0) eap: Sending EAP Request (code 1) ID 1 length 6
> (0) eap: EAP session adding &reply:State = 0x8db2a5328db3a858
> (0) [eap] = handled
> (0) } # authenticate = handled
> (0) Using Post-Auth-Type Challenge
> (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (0) Challenge { ... } # empty sub-section is ignored
> (0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:36789
> length 0
> (0) EAP-Message = 0x010100060d20
> (0) Message-Authenticator = 0x00000000000000000000000000000000
> (0) State = 0x8db2a5328db3a858fbbf5fa81909ec3c
> (0) Finished request
> Waking up in 4.9 seconds.
> (1) Received Access-Request Id 1 from 127.0.0.1:36789 to 127.0.0.1:1812
> length 446
> (1) User-Name = "client.pem"
> (1) NAS-IP-Address = 127.0.0.1
> (1) Calling-Station-Id = "02-00-00-00-00-01"
> (1) Framed-MTU = 1400
> (1) NAS-Port-Type = Wireless-802.11
> (1) Service-Type = Framed-User
> (1) Connect-Info = "CONNECT 11Mbps 802.11b"
> (1) EAP-Message =
> 0x020101330d0016030101280100012403039c4469b54ea5c4edd45618780c24fa5ca5f8897d2e475569a1553c51469fb9470000aac030c02cc028c024c014c00a00a500a300a1009f006b006a0069006800390038003700360088008700860085c032c02ec02ac026c00fc005009d003d00350084c02fc0
> (1) State = 0x8db2a5328db3a858fbbf5fa81909ec3c
> (1) Message-Authenticator = 0xae86ca804883a58af655d7ad8ce39609
> (1) session-state: No cached attributes
> (1) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (1) authorize {
> (1) policy filter_username {
> (1) if (&User-Name) {
> (1) if (&User-Name) -> TRUE
> (1) if (&User-Name) {
> (1) if (&User-Name =~ / /) {
> (1) if (&User-Name =~ / /) -> FALSE
> (1) if (&User-Name =~ /@[^@]*@/ ) {
> (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (1) if (&User-Name =~ /\.\./ ) {
> (1) if (&User-Name =~ /\.\./ ) -> FALSE
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (1) if (&User-Name =~ /\.$/) {
> (1) if (&User-Name =~ /\.$/) -> FALSE
> (1) if (&User-Name =~ /@\./) {
> (1) if (&User-Name =~ /@\./) -> FALSE
> (1) } # if (&User-Name) = notfound
> (1) } # policy filter_username = notfound
> (1) [preprocess] = ok
> (1) auth_log: EXPAND
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> (1) auth_log: --> /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (1) auth_log:
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> expands to /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (1) auth_log: EXPAND %t
> (1) auth_log: --> Tue Aug 21 19:09:39 2018
> (1) [auth_log] = ok
> (1) eap: Peer sent EAP Response (code 2) ID 1 length 307
> (1) eap: No EAP Start, assuming it's an on-going EAP conversation
> (1) [eap] = updated
> (1) files: users: Matched entry DEFAULT at line 1
> (1) [files] = ok
> (1) [expiration] = noop
> (1) [logintime] = noop
> (1) } # authorize = updated
> (1) Found Auth-Type = eap
> (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (1) authenticate {
> (1) eap: Expiring EAP session with state 0x8db2a5328db3a858
> (1) eap: Finished EAP session with state 0x8db2a5328db3a858
> (1) eap: Previous EAP request found for state 0x8db2a5328db3a858, released
> from the list
> (1) eap: Peer sent packet with method EAP TLS (13)
> (1) eap: Calling submodule eap_tls to process data
> (1) eap_tls: Continuing EAP-TLS
> (1) eap_tls: Got final TLS record fragment (301 bytes)
> (1) eap_tls: WARNING: Total received TLS record fragments (301 bytes),
> does not equal indicated TLS record length (0 bytes)
> (1) eap_tls: [eaptls verify] = ok
> (1) eap_tls: Done initial handshake
> (1) eap_tls: (other): before/accept initialization
> (1) eap_tls: TLS_accept: before/accept initialization
> (1) eap_tls: <<< recv TLS 1.2 [length 0128]
> (1) eap_tls: TLS_accept: unknown state
> (1) eap_tls: >>> send TLS 1.2 [length 003e]
> (1) eap_tls: TLS_accept: unknown state
> (1) eap_tls: >>> send TLS 1.2 [length 0885]
> (1) eap_tls: TLS_accept: unknown state
> (1) eap_tls: >>> send TLS 1.2 [length 014d]
> (1) eap_tls: TLS_accept: unknown state
> (1) eap_tls: >>> send TLS 1.2 [length 00b6]
> (1) eap_tls: TLS_accept: unknown state
> (1) eap_tls: TLS_accept: unknown state
> (1) eap_tls: TLS_accept: Need to read more data: unknown state
> (1) eap_tls: TLS_accept: Need to read more data: unknown state
> (1) eap_tls: In SSL Handshake Phase
> (1) eap_tls: In SSL Accept mode
> (1) eap_tls: [eaptls process] = handled
> (1) eap: Sending EAP Request (code 1) ID 2 length 1024
> (1) eap: EAP session adding &reply:State = 0x8db2a5328cb0a858
> (1) [eap] = handled
> (1) } # authenticate = handled
> (1) Using Post-Auth-Type Challenge
> (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (1) Challenge { ... } # empty sub-section is ignored
> (1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:36789
> length 0
> (1) EAP-Message =
> 0x010204000dc000000ada160303003e0200003a03031b79870f786030224aafaf12faf3cb11780b455b25fcdd8f3be3c65bd5d54eb400c030000012ff01000100000b000403000102000f00010116030308850b00088100087e0003c0308203bc308202a4a003020102020101300d06092a864886f70d01
> (1) Message-Authenticator = 0x00000000000000000000000000000000
> (1) State = 0x8db2a5328cb0a858fbbf5fa81909ec3c
> (1) Finished request
> Waking up in 4.9 seconds.
> (2) Received Access-Request Id 2 from 127.0.0.1:36789 to 127.0.0.1:1812
> length 143
> (2) User-Name = "client.pem"
> (2) NAS-IP-Address = 127.0.0.1
> (2) Calling-Station-Id = "02-00-00-00-00-01"
> (2) Framed-MTU = 1400
> (2) NAS-Port-Type = Wireless-802.11
> (2) Service-Type = Framed-User
> (2) Connect-Info = "CONNECT 11Mbps 802.11b"
> (2) EAP-Message = 0x020200060d00
> (2) State = 0x8db2a5328cb0a858fbbf5fa81909ec3c
> (2) Message-Authenticator = 0x09374abbc754eba45442ae669e219bc7
> (2) session-state: No cached attributes
> (2) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (2) authorize {
> (2) policy filter_username {
> (2) if (&User-Name) {
> (2) if (&User-Name) -> TRUE
> (2) if (&User-Name) {
> (2) if (&User-Name =~ / /) {
> (2) if (&User-Name =~ / /) -> FALSE
> (2) if (&User-Name =~ /@[^@]*@/ ) {
> (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (2) if (&User-Name =~ /\.\./ ) {
> (2) if (&User-Name =~ /\.\./ ) -> FALSE
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (2) if (&User-Name =~ /\.$/) {
> (2) if (&User-Name =~ /\.$/) -> FALSE
> (2) if (&User-Name =~ /@\./) {
> (2) if (&User-Name =~ /@\./) -> FALSE
> (2) } # if (&User-Name) = notfound
> (2) } # policy filter_username = notfound
> (2) [preprocess] = ok
> (2) auth_log: EXPAND
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> (2) auth_log: --> /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (2) auth_log:
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> expands to /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (2) auth_log: EXPAND %t
> (2) auth_log: --> Tue Aug 21 19:09:39 2018
> (2) [auth_log] = ok
> (2) eap: Peer sent EAP Response (code 2) ID 2 length 6
> (2) eap: No EAP Start, assuming it's an on-going EAP conversation
> (2) [eap] = updated
> (2) files: users: Matched entry DEFAULT at line 1
> (2) [files] = ok
> (2) [expiration] = noop
> (2) [logintime] = noop
> (2) } # authorize = updated
> (2) Found Auth-Type = eap
> (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (2) authenticate {
> (2) eap: Expiring EAP session with state 0x8db2a5328cb0a858
> (2) eap: Finished EAP session with state 0x8db2a5328cb0a858
> (2) eap: Previous EAP request found for state 0x8db2a5328cb0a858, released
> from the list
> (2) eap: Peer sent packet with method EAP TLS (13)
> (2) eap: Calling submodule eap_tls to process data
> (2) eap_tls: Continuing EAP-TLS
> (2) eap_tls: Peer ACKed our handshake fragment
> (2) eap_tls: [eaptls verify] = request
> (2) eap_tls: [eaptls process] = handled
> (2) eap: Sending EAP Request (code 1) ID 3 length 1024
> (2) eap: EAP session adding &reply:State = 0x8db2a5328fb1a858
> (2) [eap] = handled
> (2) } # authenticate = handled
> (2) Using Post-Auth-Type Challenge
> (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (2) Challenge { ... } # empty sub-section is ignored
> (2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:36789
> length 0
> (2) EAP-Message =
> 0x010304000dc000000ada3fc6f74e554b65096cf1c9576d66e5a1b19b053f667702d6acbfd8730004b8308204b43082039ca003020102020900c600a5ee176d055c300d06092a864886f70d01010b0500308183310b3009060355040613025553310b300906035504080c0257413113301106035504070c
> (2) Message-Authenticator = 0x00000000000000000000000000000000
> (2) State = 0x8db2a5328fb1a858fbbf5fa81909ec3c
> (2) Finished request
> Waking up in 4.9 seconds.
> (3) Received Access-Request Id 3 from 127.0.0.1:36789 to 127.0.0.1:1812
> length 143
> (3) User-Name = "client.pem"
> (3) NAS-IP-Address = 127.0.0.1
> (3) Calling-Station-Id = "02-00-00-00-00-01"
> (3) Framed-MTU = 1400
> (3) NAS-Port-Type = Wireless-802.11
> (3) Service-Type = Framed-User
> (3) Connect-Info = "CONNECT 11Mbps 802.11b"
> (3) EAP-Message = 0x020300060d00
> (3) State = 0x8db2a5328fb1a858fbbf5fa81909ec3c
> (3) Message-Authenticator = 0x32b0f0985f480c56b06736c57595844b
> (3) session-state: No cached attributes
> (3) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (3) authorize {
> (3) policy filter_username {
> (3) if (&User-Name) {
> (3) if (&User-Name) -> TRUE
> (3) if (&User-Name) {
> (3) if (&User-Name =~ / /) {
> (3) if (&User-Name =~ / /) -> FALSE
> (3) if (&User-Name =~ /@[^@]*@/ ) {
> (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (3) if (&User-Name =~ /\.\./ ) {
> (3) if (&User-Name =~ /\.\./ ) -> FALSE
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (3) if (&User-Name =~ /\.$/) {
> (3) if (&User-Name =~ /\.$/) -> FALSE
> (3) if (&User-Name =~ /@\./) {
> (3) if (&User-Name =~ /@\./) -> FALSE
> (3) } # if (&User-Name) = notfound
> (3) } # policy filter_username = notfound
> (3) [preprocess] = ok
> (3) auth_log: EXPAND
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> (3) auth_log: --> /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (3) auth_log:
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> expands to /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (3) auth_log: EXPAND %t
> (3) auth_log: --> Tue Aug 21 19:09:39 2018
> (3) [auth_log] = ok
> (3) eap: Peer sent EAP Response (code 2) ID 3 length 6
> (3) eap: No EAP Start, assuming it's an on-going EAP conversation
> (3) [eap] = updated
> (3) files: users: Matched entry DEFAULT at line 1
> (3) [files] = ok
> (3) [expiration] = noop
> (3) [logintime] = noop
> (3) } # authorize = updated
> (3) Found Auth-Type = eap
> (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (3) authenticate {
> (3) eap: Expiring EAP session with state 0x8db2a5328fb1a858
> (3) eap: Finished EAP session with state 0x8db2a5328fb1a858
> (3) eap: Previous EAP request found for state 0x8db2a5328fb1a858, released
> from the list
> (3) eap: Peer sent packet with method EAP TLS (13)
> (3) eap: Calling submodule eap_tls to process data
> (3) eap_tls: Continuing EAP-TLS
> (3) eap_tls: Peer ACKed our handshake fragment
> (3) eap_tls: [eaptls verify] = request
> (3) eap_tls: [eaptls process] = handled
> (3) eap: Sending EAP Request (code 1) ID 4 length 760
> (3) eap: EAP session adding &reply:State = 0x8db2a5328eb6a858
> (3) [eap] = handled
> (3) } # authenticate = handled
> (3) Using Post-Auth-Type Challenge
> (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (3) Challenge { ... } # empty sub-section is ignored
> (3) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:36789
> length 0
> (3) EAP-Message =
> 0x010402f80d8000000adaa158fd0cacf5726c80718dfbaa6c75fa64462d6736903610eb5f1638a7ba7c925b858636296265568e5076bed345f273aaa1d83a2e064f5e6d266da1b233d94533b8803e497f4f37900c0cb829a3f04bc6d4b610dee50a8a47dad71eec9a5ba6538c81bf9bb7fae723a0a61b23
> (3) Message-Authenticator = 0x00000000000000000000000000000000
> (3) State = 0x8db2a5328eb6a858fbbf5fa81909ec3c
> (3) Finished request
> Waking up in 4.9 seconds.
> (4) Received Access-Request Id 4 from 127.0.0.1:36789 to 127.0.0.1:1812
> length 1555
> (4) User-Name = "client.pem"
> (4) NAS-IP-Address = 127.0.0.1
> (4) Calling-Station-Id = "02-00-00-00-00-01"
> (4) Framed-MTU = 1400
> (4) NAS-Port-Type = Wireless-802.11
> (4) Service-Type = Framed-User
> (4) Connect-Info = "CONNECT 11Mbps 802.11b"
> (4) EAP-Message =
> 0x020405800dc000000a1316030308830b00087f00087c0003be308203ba308202a2a003020102020102300d06092a864886f70d01010b0500308183310b3009060355040613025553310b300906035504080c0257413113301106035504070c0a42656c6c696e6768616d31123010060355040a0c094661
> (4) State = 0x8db2a5328eb6a858fbbf5fa81909ec3c
> (4) Message-Authenticator = 0x9073f436730652ec433ae776fd3f8183
> (4) session-state: No cached attributes
> (4) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (4) authorize {
> (4) policy filter_username {
> (4) if (&User-Name) {
> (4) if (&User-Name) -> TRUE
> (4) if (&User-Name) {
> (4) if (&User-Name =~ / /) {
> (4) if (&User-Name =~ / /) -> FALSE
> (4) if (&User-Name =~ /@[^@]*@/ ) {
> (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (4) if (&User-Name =~ /\.\./ ) {
> (4) if (&User-Name =~ /\.\./ ) -> FALSE
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (4) if (&User-Name =~ /\.$/) {
> (4) if (&User-Name =~ /\.$/) -> FALSE
> (4) if (&User-Name =~ /@\./) {
> (4) if (&User-Name =~ /@\./) -> FALSE
> (4) } # if (&User-Name) = notfound
> (4) } # policy filter_username = notfound
> (4) [preprocess] = ok
> (4) auth_log: EXPAND
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> (4) auth_log: --> /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (4) auth_log:
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> expands to /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (4) auth_log: EXPAND %t
> (4) auth_log: --> Tue Aug 21 19:09:39 2018
> (4) [auth_log] = ok
> (4) eap: Peer sent EAP Response (code 2) ID 4 length 1408
> (4) eap: No EAP Start, assuming it's an on-going EAP conversation
> (4) [eap] = updated
> (4) files: users: Matched entry DEFAULT at line 1
> (4) [files] = ok
> (4) [expiration] = noop
> (4) [logintime] = noop
> (4) } # authorize = updated
> (4) Found Auth-Type = eap
> (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (4) authenticate {
> (4) eap: Expiring EAP session with state 0x8db2a5328eb6a858
> (4) eap: Finished EAP session with state 0x8db2a5328eb6a858
> (4) eap: Previous EAP request found for state 0x8db2a5328eb6a858, released
> from the list
> (4) eap: Peer sent packet with method EAP TLS (13)
> (4) eap: Calling submodule eap_tls to process data
> (4) eap_tls: Continuing EAP-TLS
> (4) eap_tls: Peer indicated complete TLS record size will be 2579 bytes
> (4) eap_tls: Expecting 2 TLS record fragments
> (4) eap_tls: Got first TLS record fragment (1398 bytes). Peer indicated
> more fragments to follow
> (4) eap_tls: [eaptls verify] = first fragment
> (4) eap_tls: ACKing Peer's TLS record fragment
> (4) eap_tls: [eaptls process] = handled
> (4) eap: Sending EAP Request (code 1) ID 5 length 6
> (4) eap: EAP session adding &reply:State = 0x8db2a53289b7a858
> (4) [eap] = handled
> (4) } # authenticate = handled
> (4) Using Post-Auth-Type Challenge
> (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (4) Challenge { ... } # empty sub-section is ignored
> (4) Sent Access-Challenge Id 4 from 127.0.0.1:1812 to 127.0.0.1:36789
> length 0
> (4) EAP-Message = 0x010500060d00
> (4) Message-Authenticator = 0x00000000000000000000000000000000
> (4) State = 0x8db2a53289b7a858fbbf5fa81909ec3c
> (4) Finished request
> Waking up in 4.9 seconds.
> (5) Received Access-Request Id 5 from 127.0.0.1:36789 to 127.0.0.1:1812
> length 1332
> (5) User-Name = "client.pem"
> (5) NAS-IP-Address = 127.0.0.1
> (5) Calling-Station-Id = "02-00-00-00-00-01"
> (5) Framed-MTU = 1400
> (5) NAS-Port-Type = Wireless-802.11
> (5) Service-Type = Framed-User
> (5) Connect-Info = "CONNECT 11Mbps 802.11b"
> (5) EAP-Message =
> 0x020504a30d009fd708c7fc4135e2c21b17e472a506e56bec63fd54772c0a3de87ec11d4dac88eeaf28e4c60bb8d1437218453166810fe18d87ca8ea690e9b386b211e159030d338d9af4acfc6b71505764594c6c1b85eced7cf21301ca8c1eca8f2752f3c06098f8efcab9203bb480391976249f12e805
> (5) State = 0x8db2a53289b7a858fbbf5fa81909ec3c
> (5) Message-Authenticator = 0x2b66063c58bd994f19a3dcc4fae8afdc
> (5) session-state: No cached attributes
> (5) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (5) authorize {
> (5) policy filter_username {
> (5) if (&User-Name) {
> (5) if (&User-Name) -> TRUE
> (5) if (&User-Name) {
> (5) if (&User-Name =~ / /) {
> (5) if (&User-Name =~ / /) -> FALSE
> (5) if (&User-Name =~ /@[^@]*@/ ) {
> (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (5) if (&User-Name =~ /\.\./ ) {
> (5) if (&User-Name =~ /\.\./ ) -> FALSE
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (5) if (&User-Name =~ /\.$/) {
> (5) if (&User-Name =~ /\.$/) -> FALSE
> (5) if (&User-Name =~ /@\./) {
> (5) if (&User-Name =~ /@\./) -> FALSE
> (5) } # if (&User-Name) = notfound
> (5) } # policy filter_username = notfound
> (5) [preprocess] = ok
> (5) auth_log: EXPAND
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> (5) auth_log: --> /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (5) auth_log:
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> expands to /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (5) auth_log: EXPAND %t
> (5) auth_log: --> Tue Aug 21 19:09:39 2018
> (5) [auth_log] = ok
> (5) eap: Peer sent EAP Response (code 2) ID 5 length 1187
> (5) eap: No EAP Start, assuming it's an on-going EAP conversation
> (5) [eap] = updated
> (5) files: users: Matched entry DEFAULT at line 1
> (5) [files] = ok
> (5) [expiration] = noop
> (5) [logintime] = noop
> (5) } # authorize = updated
> (5) Found Auth-Type = eap
> (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (5) authenticate {
> (5) eap: Expiring EAP session with state 0x8db2a53289b7a858
> (5) eap: Finished EAP session with state 0x8db2a53289b7a858
> (5) eap: Previous EAP request found for state 0x8db2a53289b7a858, released
> from the list
> (5) eap: Peer sent packet with method EAP TLS (13)
> (5) eap: Calling submodule eap_tls to process data
> (5) eap_tls: Continuing EAP-TLS
> (5) eap_tls: Got final TLS record fragment (1181 bytes)
> (5) eap_tls: [eaptls verify] = ok
> (5) eap_tls: Done initial handshake
> (5) eap_tls: <<< recv TLS 1.2 [length 0883]
> (5) eap_tls: Creating attributes from certificate OIDs
> (5) eap_tls: TLS-Cert-Serial := "c600a5ee176d055c"
> (5) eap_tls: TLS-Cert-Expiration := "181019201014Z"
> (5) eap_tls: TLS-Cert-Subject :=
> "/C=US/ST=WA/L=Town/O=company/emailAddress=admintest at email.com/CN=Radius
> Server"
> (5) eap_tls: TLS-Cert-Issuer :=
> "/C=US/ST=WA/L=Town/O=company/emailAddress=admintest at email.com/CN=Radius
> Server"
> (5) eap_tls: TLS-Cert-Common-Name := "Radius Server"
> (5) eap_tls: Creating attributes from certificate OIDs
> (5) eap_tls: TLS-Client-Cert-Serial := "02"
> (5) eap_tls: TLS-Client-Cert-Expiration := "181019201107Z"
> (5) eap_tls: TLS-Client-Cert-Subject :=
> "/C=US/ST=WA/O=company/CN=kevin.test/emailAddress=kevin.test at email.com"
> (5) eap_tls: TLS-Client-Cert-Issuer :=
> "/C=US/ST=WA/L=Town/O=company/emailAddress=admintest at email.com/CN=Radius
> Server"
> (5) eap_tls: TLS-Client-Cert-Common-Name := "kevin.test"
> (5) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web
> Client Authentication"
> (5) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID +=
> "1.3.6.1.5.5.7.3.2"
> (5) eap_tls: Verifying client certificate: /usr/bin/openssl verify -CApath
> /usr/local/etc/raddb/certs %{TLS-Client-Cert-Filename}
> (5) eap_tls: Executing: /usr/bin/openssl verify -CApath
> /usr/local/etc/raddb/certs %{TLS-Client-Cert-Filename}:
> (5) eap_tls: EXPAND %{TLS-Client-Cert-Filename}
> (5) eap_tls: --> /tmp/radiusd/radiusd.client.XX6sVjt9
> (5) eap_tls: Program returned code (0) and output
> '/tmp/radiusd/radiusd.client.XX6sVjt9: OK'
> (5) eap_tls: Client certificate CN kevin.test passed external validation
> (5) eap_tls: TLS_accept: unknown state
> (5) eap_tls: <<< recv TLS 1.2 [length 0046]
> (5) eap_tls: TLS_accept: unknown state
> (5) eap_tls: <<< recv TLS 1.2 [length 0108]
> (5) eap_tls: TLS_accept: unknown state
> (5) eap_tls: <<< recv TLS 1.2 [length 0001]
> (5) eap_tls: <<< recv TLS 1.2 [length 0010]
> (5) eap_tls: TLS_accept: unknown state
> (5) eap_tls: >>> send TLS 1.2 [length 0001]
> (5) eap_tls: TLS_accept: unknown state
> (5) eap_tls: >>> send TLS 1.2 [length 0010]
> (5) eap_tls: TLS_accept: unknown state
> (5) eap_tls: TLS_accept: unknown state
> (5) eap_tls: (other): SSL negotiation finished successfully
> (5) eap_tls: SSL Connection Established
> (5) eap_tls: [eaptls process] = handled
> (5) eap: Sending EAP Request (code 1) ID 6 length 61
> (5) eap: EAP session adding &reply:State = 0x8db2a53288b4a858
> (5) [eap] = handled
> (5) } # authenticate = handled
> (5) Using Post-Auth-Type Challenge
> (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (5) Challenge { ... } # empty sub-section is ignored
> (5) Sent Access-Challenge Id 5 from 127.0.0.1:1812 to 127.0.0.1:36789
> length 0
> (5) EAP-Message =
> 0x0106003d0d80000000331403030001011603030028381c7e1783d65af09f05df42d3f1b2fed20f91d132889dc662acf7908c7b8dd2a1a9530889f2030a
> (5) Message-Authenticator = 0x00000000000000000000000000000000
> (5) State = 0x8db2a53288b4a858fbbf5fa81909ec3c
> (5) Finished request
> Waking up in 4.9 seconds.
> (6) Received Access-Request Id 6 from 127.0.0.1:36789 to 127.0.0.1:1812
> length 143
> (6) User-Name = "client.pem"
> (6) NAS-IP-Address = 127.0.0.1
> (6) Calling-Station-Id = "02-00-00-00-00-01"
> (6) Framed-MTU = 1400
> (6) NAS-Port-Type = Wireless-802.11
> (6) Service-Type = Framed-User
> (6) Connect-Info = "CONNECT 11Mbps 802.11b"
> (6) EAP-Message = 0x020600060d00
> (6) State = 0x8db2a53288b4a858fbbf5fa81909ec3c
> (6) Message-Authenticator = 0x3ffc0b16b3614022609b9f298eafda17
> (6) session-state: No cached attributes
> (6) # Executing section authorize from file
> /usr/local/etc/raddb/sites-enabled/default
> (6) authorize {
> (6) policy filter_username {
> (6) if (&User-Name) {
> (6) if (&User-Name) -> TRUE
> (6) if (&User-Name) {
> (6) if (&User-Name =~ / /) {
> (6) if (&User-Name =~ / /) -> FALSE
> (6) if (&User-Name =~ /@[^@]*@/ ) {
> (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (6) if (&User-Name =~ /\.\./ ) {
> (6) if (&User-Name =~ /\.\./ ) -> FALSE
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (6) if (&User-Name =~ /\.$/) {
> (6) if (&User-Name =~ /\.$/) -> FALSE
> (6) if (&User-Name =~ /@\./) {
> (6) if (&User-Name =~ /@\./) -> FALSE
> (6) } # if (&User-Name) = notfound
> (6) } # policy filter_username = notfound
> (6) [preprocess] = ok
> (6) auth_log: EXPAND
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> (6) auth_log: --> /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (6) auth_log:
> /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
> expands to /usr/local/var/log/radius/radacct/
> 127.0.0.1/auth-detail-20180821
> (6) auth_log: EXPAND %t
> (6) auth_log: --> Tue Aug 21 19:09:39 2018
> (6) [auth_log] = ok
> (6) eap: Peer sent EAP Response (code 2) ID 6 length 6
> (6) eap: No EAP Start, assuming it's an on-going EAP conversation
> (6) [eap] = updated
> (6) files: users: Matched entry DEFAULT at line 1
> (6) [files] = ok
> (6) [expiration] = noop
> (6) [logintime] = noop
> (6) } # authorize = updated
> (6) Found Auth-Type = eap
> (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (6) authenticate {
> (6) eap: Expiring EAP session with state 0x8db2a53288b4a858
> (6) eap: Finished EAP session with state 0x8db2a53288b4a858
> (6) eap: Previous EAP request found for state 0x8db2a53288b4a858, released
> from the list
> (6) eap: Peer sent packet with method EAP TLS (13)
> (6) eap: Calling submodule eap_tls to process data
> (6) eap_tls: Continuing EAP-TLS
> (6) eap_tls: Peer ACKed our handshake fragment. handshake is finished
> (6) eap_tls: [eaptls verify] = success
> (6) eap_tls: [eaptls process] = success
> (6) eap: Sending EAP Success (code 3) ID 6 length 4
> (6) eap: Freeing handler
> (6) [eap] = ok
> (6) } # authenticate = ok
> (6) # Executing section post-auth from file
> /usr/local/etc/raddb/sites-enabled/default
> (6) post-auth {
> (6) update {
> (6) No attributes updated
> (6) } # update = noop
> (6) ldap: EXPAND .
> (6) ldap: --> .
> (6) ldap: EXPAND Authenticated at %S
> (6) ldap: --> Authenticated at 2018-08-21 19:09:39
> rlm_ldap (ldap): Reserved connection (0)
> (6) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}})
> (6) ldap: --> (samaccountname=client.pem)
> (6) ldap: Performing search in "dc=Domain,dc=net" with filter
> "(samaccountname=client.pem)", scope "sub"
> (6) ldap: Waiting for search result...
> (6) ldap: ERROR: Failed performing search: Operations error with LDAP
> database. Please see the LDAP server configuration / documentation for
> more information.
> (6) ldap: ERROR: Server said: 000004DC: LdapErr: DSID-0C0907C2, comment:
> In order to perform this operation a successful bind must be completed on
> the connection., data 0, v2580.
> rlm_ldap (ldap): Released connection (0)
> Need 5 more connections to reach 10 spares
> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://Domain.net:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> (6) [ldap] = fail
> (6) } # post-auth = fail
> (6) Using Post-Auth-Type Reject
> (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> (6) Post-Auth-Type REJECT {
> (6) attr_filter.access_reject: EXPAND %{User-Name}
> (6) attr_filter.access_reject: --> client.pem
> (6) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (6) [attr_filter.access_reject] = updated
> (6) [eap] = noop
> (6) policy remove_reply_message_if_eap {
> (6) if (&reply:EAP-Message && &reply:Reply-Message) {
> (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> (6) else {
> (6) [noop] = noop
> (6) } # else = noop
> (6) } # policy remove_reply_message_if_eap = noop
> (6) } # Post-Auth-Type REJECT = updated
> (6) Delaying response for 1.000000 seconds
> Waking up in 0.3 seconds.
> Waking up in 0.6 seconds.
> (6) Sending delayed response
> (6) Sent Access-Reject Id 6 from 127.0.0.1:1812 to 127.0.0.1:36789 length
> 44
> (6) EAP-Message = 0x03060004
> (6) Message-Authenticator = 0x00000000000000000000000000000000
> Waking up in 3.9 seconds.
> (0) Cleaning up request packet ID 0 with timestamp +4
> (1) Cleaning up request packet ID 1 with timestamp +4
> (2) Cleaning up request packet ID 2 with timestamp +4
> (3) Cleaning up request packet ID 3 with timestamp +4
> (4) Cleaning up request packet ID 4 with timestamp +4
> (5) Cleaning up request packet ID 5 with timestamp +4
> (6) Cleaning up request packet ID 6 with timestamp +4
> Ready to process requests
>
>
>
> From: Freeradius-Users <freeradius-users-bounces+kevin.virk=
> faithlife.com at lists.freeradius.org> on behalf of
> freeradius-users-request at lists.freeradius.org <
> freeradius-users-request at lists.freeradius.org>
> Sent: Tuesday, August 21, 2018 3:00 AM
> To: freeradius-users at lists.freeradius.org
> Subject: Freeradius-Users Digest, Vol 160, Issue 41
>
> Send Freeradius-Users mailing list submissions to
> freeradius-users at lists.freeradius.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.freeradius.org/mailman/listinfo/freeradius-users
> or, via email, send a message with subject or body 'help' to
> freeradius-users-request at lists.freeradius.org
>
> You can reach the person managing the list at
> freeradius-users-owner at lists.freeradius.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Freeradius-Users digest..."
>
>
> Today's Topics:
>
> 1. Re: Re: Apache with mod_auth_radius starts X requests
> (Fajar A. Nugraha)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 21 Aug 2018 16:25:50 +0700
> From: "Fajar A. Nugraha" <list at fajar.net>
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Subject: Re: Re: Apache with mod_auth_radius starts X requests
> Message-ID:
> <CAG1y0sda1T+K+gGYotwihfd+Ly2RLkPrZd_fCt2Ciiz31q-jQQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> On Tue, Aug 21, 2018 at 4:22 PM, Carsten Schulze <
> carsten.schulze at leuphana.de> wrote:
>
> > Hi,
> >
> > to finalize.
> >
> > I installed a PHP Directory Listner to that folder, with that, only one
> > request was generated.
> >
> > If its not possible, you can reduce the index.* (checks) in apache, which
> > will reduce the total amount of Radius-Reuqests.
> >
> > /etc/apache2/mods-enabled/dir.conf
> > <IfModule mod_dir.c>
> > #DirectoryIndex index.html index.cgi index.pl index.php
> > index.xhtml index.htm
> > DirectoryIndex index.php
> > </IfModule>
> >
> >
> Isn't that basically what
> https://github.com/FreeRADIUS/mod_auth_radius#4-some-warnings says?
>
> --
> Fajar
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> ------------------------------
>
> End of Freeradius-Users Digest, Vol 160, Issue 41
> *************************************************
>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
--
Best regards, Alex Morozenko
More information about the Freeradius-Users
mailing list