Help configuring FreeRADIUS on OS X Server - ERROR: (2) mschap: ERROR: (null): status = eServerError
Eric Wittle
eric at wittle.net
Mon Dec 3 12:48:54 CET 2018
In case it helps, I’m including the packet-handling result from the OSX server bundled version that works, for the same user trying to authenticate. The bundled version is 2.2.10.
-Eric
rad_recv: Access-Request packet from host 192.168.1.1 port 60795, id=2, length=132
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = "eric"
MS-CHAP-Challenge = 0x7773bea95387ac16365f5290c86a3bbc
MS-CHAP2-Response = 0x500058b7ad77e3cb4663ed328c1ca8bc8c5a00000000000000006a34bfaed3a90f2dc844d86da2b83d02f9f7a2c7dc8c5cf8
NAS-IP-Address = 127.0.1.1
NAS-Port = 0
# Executing section authorize from file /Library/Server/radius/raddb/sites-enabled/default
+group authorize {
++[preprocess] = ok
++[chap] = noop
[mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
++[mschap] = ok
++[digest] = noop
[suffix] No '@' in User-Name = "eric", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
[eap] No EAP-Message, not doing EAP
++[eap] = noop
[files] users: Matched entry DEFAULT at line 178
++[files] = ok
[opendirectory] The host 192.168.1.1 does not have an access group.
++[opendirectory] = ok
++[expiration] = noop
++[logintime] = noop
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] = noop
+} # group authorize = ok
Found Auth-Type = MSCHAP
# Executing group from file /Library/Server/radius/raddb/sites-enabled/default
+group MS-CHAP {
[mschap] No Cleartext-Password configured. Cannot create LM-Password.
[mschap] No Cleartext-Password configured. Cannot create NT-Password.
[mschap] Creating challenge hash with username: eric
[mschap] Client is using MS-CHAPv2 for eric, we need NT-Password
[mschap] Using OpenDirectory to authenticate
[mschap] Doing OD MSCHAPv2 auth
[mschap] Successful authentication for eric
++[mschap] = ok
+} # group MS-CHAP = ok
Login OK: [eric/<via Auth-Type = MSCHAP>] (from client router.wittle.net port 0)
# Executing section post-auth from file /Library/Server/radius/raddb/sites-enabled/default
+group post-auth {
++[exec] = noop
+} # group post-auth = noop
Sending Access-Accept of id 2 to 192.168.1.1 port 60795
Framed-Protocol = PPP
Framed-Compression = Van-Jacobson-TCP-IP
MS-CHAP2-Success = 0x50533d35323342334444384141413539344246304330433030373546423534413133454445393738323530
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 192.168.1.1 port 40029, id=3, length=96
Acct-Session-Id = "5C0514303B2A00"
User-Name = "eric"
Acct-Status-Type = Start
Service-Type = Framed-User
Framed-Protocol = PPP
Acct-Authentic = RADIUS
NAS-Port-Type = Async
Framed-IP-Address = 192.168.6.100
NAS-IP-Address = 127.0.1.1
NAS-Port = 0
Acct-Delay-Time = 0
# Executing section preacct from file /Library/Server/radius/raddb/sites-enabled/default
+group preacct {
++[preprocess] = ok
[acct_unique] WARNING: Attribute NAS-Identifier was not found in request, unique ID MAY be inconsistent
[acct_unique] Hashing 'NAS-Port = 0,,NAS-IP-Address = 127.0.1.1,Acct-Session-Id = "5C0514303B2A00",User-Name = "eric"'
[acct_unique] Acct-Unique-Session-ID = "2a99ab6a447c4184".
++[acct_unique] = ok
[suffix] No '@' in User-Name = "eric", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
++[files] = noop
+} # group preacct = ok
# Executing section accounting from file /Library/Server/radius/raddb/sites-enabled/default
+group accounting {
[detail] expand: %{Packet-Src-IP-Address} -> 192.168.1.1
[detail] expand: /private/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /private/var/log/radius/radacct/192.168.1.1/detail-20181203
[detail] /private/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /private/var/log/radius/radacct/192.168.1.1/detail-20181203
[detail] expand: %t -> Mon Dec 3 06:32:00 2018
++[detail] = ok
++[exec] = noop
[attr_filter.accounting_response] expand: %{User-Name} -> eric
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] = updated
+} # group accounting = updated
Sending Accounting-Response of id 3 to 192.168.1.1 port 40029
Finished request 1.
Cleaning up request 1 ID 3 with timestamp +23
Going to the next request
Waking up in 4.3 seconds.
Cleaning up request 0 ID 2 with timestamp +22
Ready to process requests.
> On Dec 3, 2018, at 6:26 AM, Eric Wittle <eric at wittle.net> wrote:
>
> OK, that’s not it. I just shut down the Apple Server FreeRadius (radiusconfig -stop), started the version I built according to the migration instructions (/usr/local/sbin/radiusd -X), and tried to access the VPN. There was one additional entry added to the ApplePasswordServer.Server.log:
>
> Dec 3 2018 06:21:55 123216us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>
> So the startup & shutdown you see below would have been from when I started and stopped the directory service from the server app for other reasons. It also seems that the username & password is making it from the VPN authentication request from my iOS device through to the directory server OK, but apparently something is happening with the response.
>
> -Eric
>
>> On Dec 3, 2018, at 6:14 AM, Eric Wittle <eric at wittle.net <mailto:eric at wittle.net>> wrote:
>>
>> Plus I believe there was a question of whether OpenDirectory logs anything useful. After a quick set of google searches, that is a good question. The closest I could find was a set of logs in the Apple Server log folder in the PasswordService directory.
>>
>> The contents of ApplePasswordServer.Error.Log
>> bash-3.2# tail -100 /Library/Logs/PasswordService/ApplePasswordServer.Error.log
>> -- Start: Server rolled log on: Nov 13 2018 21:17:19 --
>> Dec 2 2018 14:52:47 819295us Requested SASL mechanism not loaded: SMB-NT
>> Dec 2 2018 15:03:43 692394us Requested SASL mechanism not loaded: SMB-NT
>> Dec 2 2018 15:07:34 139111us Requested SASL mechanism not loaded: SMB-NT
>>
>> The tail end of ApplePasswordServer.Server.Log
>>
>> bash-3.2# tail -100 /Library/Logs/PasswordService/ApplePasswordServer.Server.log
>> Dec 2 2018 14:52:43 233320us Stopping server processes ...
>> Dec 2 2018 14:52:43 234062us Closing all incoming connections ...
>> Dec 2 2018 14:52:43 234097us StopCentralThreads: Stopping Connection Listeners ...
>> Dec 2 2018 14:52:43 234645us StopCentralThreads: Current Threads: 10
>> Dec 2 2018 14:52:43 234669us Stopping Network Processes ...
>> Dec 2 2018 14:52:43 234682us Deinitializing networking ...
>> Dec 2 2018 14:52:43 234701us Server Processes Stopped ...
>> Dec 2 2018 14:52:43 234718us RunAppThread Stopped
>> Dec 2 2018 14:52:43 234747us RunAppThread Deleted
>> Dec 2 2018 14:52:47 755661us Mac OS X Password Service version 424 (pid = 37915) was started at: Sun Dec 2 14:52:47 2018
>> .
>> Dec 2 2018 14:52:47 755702us RunAppThread Created
>> Dec 2 2018 14:52:47 755746us RunAppThread Started
>> Dec 2 2018 14:52:47 755760us Initializing Server Globals ...
>> Dec 2 2018 14:52:47 768754us Initializing Networking ...
>> Dec 2 2018 14:52:47 768819us Initializing TCP ...
>> Dec 2 2018 14:52:47 819245us SASL is using realm "MAIL.WITTLE.NET <http://mail.wittle.net/>"
>> Dec 2 2018 14:52:47 824367us Starting Central Thread ...
>> Dec 2 2018 14:52:47 824401us Starting other server processes ...
>> Dec 2 2018 14:52:47 824412us StartCentralThreads: 1 threads to stop
>> Dec 2 2018 14:52:47 824451us Initializing TCP ...
>> Dec 2 2018 14:52:47 824580us Starting TCP/IP Listener on ethernet interface, port 106
>> Dec 2 2018 14:52:47 824630us Starting TCP/IP Listener on ethernet interface, port 3659
>> Dec 2 2018 14:52:47 824723us Starting TCP/IP Listener on interface lo0, port 106
>> Dec 2 2018 14:52:47 824762us Starting TCP/IP Listener on interface lo0, port 3659
>> Dec 2 2018 14:52:47 824800us StartCentralThreads: Created 4 TCP/IP Connection Listeners
>> Dec 2 2018 14:52:47 824820us Starting UNIX domain socket listener /var/run/passwordserver
>> Dec 2 2018 14:52:47 825558us Finished starting other server processes ...
>> Dec 2 2018 14:52:47 825582us -- Password Server successfully started --
>> Dec 2 2018 14:52:47 825592us -- Start time: 0 sec, 74 msec --
>> Dec 2 2018 15:03:32 701865us Stopping server processes ...
>> Dec 2 2018 15:03:32 702676us Closing all incoming connections ...
>> Dec 2 2018 15:03:32 702706us StopCentralThreads: Stopping Connection Listeners ...
>> Dec 2 2018 15:03:32 703903us StopCentralThreads: Current Threads: 3
>> Dec 2 2018 15:03:32 703930us Stopping Network Processes ...
>> Dec 2 2018 15:03:32 703944us Deinitializing networking ...
>> Dec 2 2018 15:03:32 703960us Server Processes Stopped ...
>> Dec 2 2018 15:03:32 703977us RunAppThread Stopped
>> Dec 2 2018 15:03:32 703989us RunAppThread Deleted
>> Dec 2 2018 15:03:33 705899us Mac OS X Password Service (pid = 37915) was shut down at: Sun Dec 2 15:03:33 2018
>> .
>> Dec 2 2018 15:03:43 644217us Mac OS X Password Service version 424 (pid = 38843) was started at: Sun Dec 2 15:03:43 2018
>> .
>> Dec 2 2018 15:03:43 644253us RunAppThread Created
>> Dec 2 2018 15:03:43 644295us RunAppThread Started
>> Dec 2 2018 15:03:43 644316us Initializing Server Globals ...
>> Dec 2 2018 15:03:43 677609us Initializing Networking ...
>> Dec 2 2018 15:03:43 677736us Initializing TCP ...
>> Dec 2 2018 15:03:43 692357us SASL is using realm "MAIL.WITTLE.NET <http://mail.wittle.net/>"
>> Dec 2 2018 15:03:43 692877us Starting Central Thread ...
>> Dec 2 2018 15:03:43 692895us Starting other server processes ...
>> Dec 2 2018 15:03:43 692905us StartCentralThreads: 1 threads to stop
>> Dec 2 2018 15:03:43 692938us Initializing TCP ...
>> Dec 2 2018 15:03:43 693040us Starting TCP/IP Listener on ethernet interface, port 106
>> Dec 2 2018 15:03:43 693082us Starting TCP/IP Listener on ethernet interface, port 3659
>> Dec 2 2018 15:03:43 693110us Starting TCP/IP Listener on interface lo0, port 106
>> Dec 2 2018 15:03:43 693133us Starting TCP/IP Listener on interface lo0, port 3659
>> Dec 2 2018 15:03:43 693156us StartCentralThreads: Created 4 TCP/IP Connection Listeners
>> Dec 2 2018 15:03:43 693167us Starting UNIX domain socket listener /var/run/passwordserver
>> Dec 2 2018 15:03:43 694190us Finished starting other server processes ...
>> Dec 2 2018 15:03:43 694212us -- Password Server successfully started --
>> Dec 2 2018 15:03:43 694222us -- Start time: 0 sec, 54 msec --
>> Dec 2 2018 15:05:24 289083us Stopping server processes ...
>> Dec 2 2018 15:05:24 289128us Closing all incoming connections ...
>> Dec 2 2018 15:05:24 289150us StopCentralThreads: Stopping Connection Listeners ...
>> Dec 2 2018 15:05:24 290059us StopCentralThreads: Current Threads: 3
>> Dec 2 2018 15:05:24 290086us Stopping Network Processes ...
>> Dec 2 2018 15:05:24 290098us Deinitializing networking ...
>> Dec 2 2018 15:05:24 290113us Server Processes Stopped ...
>> Dec 2 2018 15:05:24 290129us RunAppThread Stopped
>> Dec 2 2018 15:05:24 290142us RunAppThread Deleted
>> Dec 2 2018 15:05:26 221197us Mac OS X Password Service (pid = 38843) was shut down at: Sun Dec 2 15:05:26 2018
>> .
>> Dec 2 2018 15:07:34 103685us Mac OS X Password Service version 424 (pid = 39140) was started at: Sun Dec 2 15:07:34 2018
>> .
>> Dec 2 2018 15:07:34 103718us RunAppThread Created
>> Dec 2 2018 15:07:34 103758us RunAppThread Started
>> Dec 2 2018 15:07:34 103779us Initializing Server Globals ...
>> Dec 2 2018 15:07:34 118899us Initializing Networking ...
>> Dec 2 2018 15:07:34 118961us Initializing TCP ...
>> Dec 2 2018 15:07:34 139076us SASL is using realm "MAIL.WITTLE.NET <http://mail.wittle.net/>"
>> Dec 2 2018 15:07:34 139134us Starting Central Thread ...
>> Dec 2 2018 15:07:34 139141us Starting other server processes ...
>> Dec 2 2018 15:07:34 139147us StartCentralThreads: 1 threads to stop
>> Dec 2 2018 15:07:34 139174us Initializing TCP ...
>> Dec 2 2018 15:07:34 139265us Starting TCP/IP Listener on ethernet interface, port 106
>> Dec 2 2018 15:07:34 139302us Starting TCP/IP Listener on ethernet interface, port 3659
>> Dec 2 2018 15:07:34 139322us Starting TCP/IP Listener on interface lo0, port 106
>> Dec 2 2018 15:07:34 139350us Starting TCP/IP Listener on interface lo0, port 3659
>> Dec 2 2018 15:07:34 139443us StartCentralThreads: Created 4 TCP/IP Connection Listeners
>> Dec 2 2018 15:07:34 139462us Starting UNIX domain socket listener /var/run/passwordserver
>> Dec 2 2018 15:07:34 140156us Finished starting other server processes ...
>> Dec 2 2018 15:07:34 140178us -- Password Server successfully started --
>> Dec 2 2018 15:07:34 140190us -- Start time: 0 sec, 41 msec --
>> Dec 2 2018 20:01:57 945387us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>> Dec 2 2018 20:35:44 395239us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>> Dec 2 2018 20:37:17 158109us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>> Dec 2 2018 20:37:43 63472us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>> Dec 2 2018 21:17:05 402081us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>> Dec 2 2018 21:37:24 961075us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>>
>> It is interesting in the above logs to see that the ApplePasswordServer is starting and stopping. Since I’m starting the OS X Server built-in freeradius instance with “radiusconfig -start”, and stoping it with “radiusconfig -stop”, I’m now wondering if the password server isn’t running when I start the version of FreeRADIUS I’m trying to install manually outside of OS X server.
>>
>> I’ll take a look and see if radiusconfig is a script…
>>
>> -Eric
>>
>>> On Dec 3, 2018, at 5:41 AM, Eric Wittle <eric at wittle.net <mailto:eric at wittle.net>> wrote:
>>>
>>> Pasted this time…
>>>
>>> FreeRADIUS Version 3.0.17
>>> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>>> PARTICULAR PURPOSE
>>> You may redistribute copies of FreeRADIUS under the terms of the
>>> GNU General Public License
>>> For more information about these matters, see the file named COPYRIGHT
>>> Starting - reading configuration files ...
>>> including dictionary file /usr/local/share/freeradius/dictionary
>>> including dictionary file /usr/local/share/freeradius/dictionary.dhcp
>>> including dictionary file /usr/local/share/freeradius/dictionary.vqp
>>> including dictionary file /usr/local/etc/raddb/dictionary
>>> including configuration file /usr/local/etc/raddb/radiusd.conf
>>> including configuration file /usr/local/etc/raddb/proxy.conf
>>> including configuration file /usr/local/etc/raddb/clients.conf
>>> including files in directory /usr/local/etc/raddb/mods-enabled/
>>> including configuration file /usr/local/etc/raddb/mods-enabled/always
>>> including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
>>> including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
>>> including configuration file /usr/local/etc/raddb/mods-enabled/chap
>>> including configuration file /usr/local/etc/raddb/mods-enabled/date
>>> including configuration file /usr/local/etc/raddb/mods-enabled/detail
>>> including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
>>> including configuration file /usr/local/etc/raddb/mods-enabled/digest
>>> including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
>>> including configuration file /usr/local/etc/raddb/mods-enabled/eap
>>> including configuration file /usr/local/etc/raddb/mods-enabled/echo
>>> including configuration file /usr/local/etc/raddb/mods-enabled/exec
>>> including configuration file /usr/local/etc/raddb/mods-enabled/expiration
>>> including configuration file /usr/local/etc/raddb/mods-enabled/expr
>>> including configuration file /usr/local/etc/raddb/mods-enabled/files
>>> including configuration file /usr/local/etc/raddb/mods-enabled/linelog
>>> including configuration file /usr/local/etc/raddb/mods-enabled/logintime
>>> including configuration file /usr/local/etc/raddb/mods-enabled/mschap
>>> including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
>>> including configuration file /usr/local/etc/raddb/mods-enabled/opendirectory
>>> including configuration file /usr/local/etc/raddb/mods-enabled/pap
>>> including configuration file /usr/local/etc/raddb/mods-enabled/passwd
>>> including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
>>> including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
>>> including configuration file /usr/local/etc/raddb/mods-enabled/realm
>>> including configuration file /usr/local/etc/raddb/mods-enabled/replicate
>>> including configuration file /usr/local/etc/raddb/mods-enabled/soh
>>> including configuration file /usr/local/etc/raddb/mods-enabled/sql
>>> including configuration file /usr/local/etc/raddb/mods-config/sql/main/sqlite/queries.conf
>>> including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
>>> including configuration file /usr/local/etc/raddb/mods-enabled/unix
>>> including configuration file /usr/local/etc/raddb/mods-enabled/unpack
>>> including configuration file /usr/local/etc/raddb/mods-enabled/utf8
>>> including files in directory /usr/local/etc/raddb/policy.d/
>>> including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
>>> including configuration file /usr/local/etc/raddb/policy.d/accounting
>>> including configuration file /usr/local/etc/raddb/policy.d/canonicalization
>>> including configuration file /usr/local/etc/raddb/policy.d/control
>>> including configuration file /usr/local/etc/raddb/policy.d/cui
>>> including configuration file /usr/local/etc/raddb/policy.d/debug
>>> including configuration file /usr/local/etc/raddb/policy.d/dhcp
>>> including configuration file /usr/local/etc/raddb/policy.d/eap
>>> including configuration file /usr/local/etc/raddb/policy.d/filter
>>> including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids
>>> including configuration file /usr/local/etc/raddb/policy.d/operator-name
>>> including files in directory /usr/local/etc/raddb/sites-enabled/
>>> including configuration file /usr/local/etc/raddb/sites-enabled/default
>>> including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
>>> main {
>>> security {
>>> allow_core_dumps = no
>>> }
>>> name = "radiusd"
>>> prefix = "/usr/local"
>>> localstatedir = "/var"
>>> logdir = "/var/log/radius"
>>> run_dir = "/var/run/radiusd"
>>> }
>>> main {
>>> name = "radiusd"
>>> prefix = "/usr/local"
>>> localstatedir = "/var"
>>> sbindir = "/usr/local/sbin"
>>> logdir = "/var/log/radius"
>>> run_dir = "/var/run/radiusd"
>>> libdir = "/usr/local/lib"
>>> radacctdir = "/var/log/radius/radacct"
>>> hostname_lookups = no
>>> max_request_time = 30
>>> cleanup_delay = 5
>>> max_requests = 16384
>>> pidfile = "/var/run/radiusd/radiusd.pid"
>>> checkrad = "/usr/local/sbin/checkrad"
>>> debug_level = 0
>>> proxy_requests = yes
>>> log {
>>> stripped_names = no
>>> auth = no
>>> auth_badpass = no
>>> auth_goodpass = no
>>> colourise = yes
>>> msg_denied = "You are already logged in - access denied"
>>> }
>>> resources {
>>> }
>>> security {
>>> max_attributes = 200
>>> reject_delay = 1.000000
>>> status_server = yes
>>> allow_vulnerable_openssl = "no"
>>> }
>>> }
>>> radiusd: #### Loading Realms and Home Servers ####
>>> proxy server {
>>> retry_delay = 5
>>> retry_count = 3
>>> default_fallback = no
>>> dead_time = 120
>>> wake_all_if_all_dead = no
>>> }
>>> home_server localhost {
>>> ipaddr = 127.0.0.1
>>> port = 1812
>>> type = "auth"
>>> secret = <<< secret >>>
>>> response_window = 20.000000
>>> response_timeouts = 1
>>> max_outstanding = 65536
>>> zombie_period = 40
>>> status_check = "status-server"
>>> ping_interval = 30
>>> check_interval = 30
>>> check_timeout = 4
>>> num_answers_to_alive = 3
>>> revive_interval = 120
>>> limit {
>>> max_connections = 16
>>> max_requests = 0
>>> lifetime = 0
>>> idle_timeout = 0
>>> }
>>> coa {
>>> irt = 2
>>> mrt = 16
>>> mrc = 5
>>> mrd = 30
>>> }
>>> }
>>> home_server_pool my_auth_failover {
>>> type = fail-over
>>> home_server = localhost
>>> }
>>> realm example.com <http://example.com/> {
>>> auth_pool = my_auth_failover
>>> }
>>> realm LOCAL {
>>> }
>>> radiusd: #### Loading Clients ####
>>> client localhost {
>>> ipaddr = 127.0.0.1
>>> require_message_authenticator = no
>>> secret = <<< secret >>>
>>> nas_type = "other"
>>> proto = "*"
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> client localhost_ipv6 {
>>> ipv6addr = ::1
>>> require_message_authenticator = no
>>> secret = <<< secret >>>
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> Debugger not attached
>>> # Creating Auth-Type = mschap
>>> # Creating Auth-Type = digest
>>> # Creating Auth-Type = eap
>>> # Creating Auth-Type = PAP
>>> # Creating Auth-Type = CHAP
>>> # Creating Auth-Type = MS-CHAP
>>> # Creating Auth-Type = opendirectory
>>> radiusd: #### Instantiating modules ####
>>> modules {
>>> # Loaded module rlm_always
>>> # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always
>>> always reject {
>>> rcode = "reject"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
>>> always fail {
>>> rcode = "fail"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
>>> always ok {
>>> rcode = "ok"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always
>>> always handled {
>>> rcode = "handled"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
>>> always invalid {
>>> rcode = "invalid"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
>>> always userlock {
>>> rcode = "userlock"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
>>> always notfound {
>>> rcode = "notfound"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
>>> always noop {
>>> rcode = "noop"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always
>>> always updated {
>>> rcode = "updated"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loaded module rlm_attr_filter
>>> # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>> attr_filter attr_filter.post-proxy {
>>> filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
>>> key = "%{Realm}"
>>> relaxed = no
>>> }
>>> # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>> attr_filter attr_filter.pre-proxy {
>>> filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
>>> key = "%{Realm}"
>>> relaxed = no
>>> }
>>> # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>> attr_filter attr_filter.access_reject {
>>> filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
>>> key = "%{User-Name}"
>>> relaxed = no
>>> }
>>> # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>> attr_filter attr_filter.access_challenge {
>>> filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
>>> key = "%{User-Name}"
>>> relaxed = no
>>> }
>>> # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>> attr_filter attr_filter.accounting_response {
>>> filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
>>> key = "%{User-Name}"
>>> relaxed = no
>>> }
>>> # Loaded module rlm_cache
>>> # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
>>> cache cache_eap {
>>> driver = "rlm_cache_rbtree"
>>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>>> ttl = 15
>>> max_entries = 0
>>> epoch = 0
>>> add_stats = no
>>> }
>>> # Loaded module rlm_chap
>>> # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
>>> # Loaded module rlm_date
>>> # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
>>> date {
>>> format = "%b %e %Y %H:%M:%S %Z"
>>> utc = no
>>> }
>>> # Loaded module rlm_detail
>>> # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
>>> detail {
>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>> detail auth_log {
>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>> detail reply_log {
>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>> detail pre_proxy_log {
>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>> detail post_proxy_log {
>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loaded module rlm_digest
>>> # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
>>> # Loaded module rlm_dynamic_clients
>>> # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
>>> # Loaded module rlm_eap
>>> # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
>>> eap {
>>> default_eap_type = "ttls"
>>> timer_expire = 60
>>> ignore_unknown_eap_types = no
>>> cisco_accounting_username_bug = no
>>> max_sessions = 16384
>>> }
>>> # Loaded module rlm_exec
>>> # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
>>> exec echo {
>>> wait = yes
>>> program = "/bin/echo %{User-Name}"
>>> input_pairs = "request"
>>> output_pairs = "reply"
>>> shell_escape = yes
>>> }
>>> # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
>>> exec {
>>> wait = no
>>> input_pairs = "request"
>>> shell_escape = yes
>>> timeout = 10
>>> }
>>> # Loaded module rlm_expiration
>>> # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
>>> # Loaded module rlm_expr
>>> # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
>>> expr {
>>> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
>>> }
>>> # Loaded module rlm_files
>>> # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
>>> files {
>>> filename = "/usr/local/etc/raddb/mods-config/files/authorize"
>>> acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
>>> preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
>>> }
>>> # Loaded module rlm_linelog
>>> # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
>>> linelog {
>>> filename = "/var/log/radius/linelog"
>>> escape_filenames = no
>>> syslog_severity = "info"
>>> permissions = 384
>>> format = "This is a log message for %{User-Name}"
>>> reference = "messages.%{%{reply:Packet-Type}:-default}"
>>> }
>>> # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
>>> linelog log_accounting {
>>> filename = "/var/log/radius/linelog-accounting"
>>> escape_filenames = no
>>> syslog_severity = "info"
>>> permissions = 384
>>> format = ""
>>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>>> }
>>> # Loaded module rlm_logintime
>>> # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
>>> logintime {
>>> minimum_timeout = 60
>>> }
>>> # Loaded module rlm_mschap
>>> # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
>>> mschap {
>>> use_mppe = yes
>>> require_encryption = no
>>> require_strong = no
>>> with_ntdomain_hack = yes
>>> passchange {
>>> }
>>> allow_retry = yes
>>> winbind_retry_with_normalised_username = no
>>> use_open_directory = yes
>>> }
>>> # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
>>> exec ntlm_auth {
>>> wait = yes
>>> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
>>> shell_escape = yes
>>> }
>>> # Loaded module rlm_opendirectory
>>> # Loading module "opendirectory" from file /usr/local/etc/raddb/mods-enabled/opendirectory
>>> # Loaded module rlm_pap
>>> # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
>>> pap {
>>> normalise = yes
>>> }
>>> # Loaded module rlm_passwd
>>> # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
>>> passwd etc_passwd {
>>> filename = "/etc/passwd"
>>> format = "*User-Name:Crypt-Password:"
>>> delimiter = ":"
>>> ignore_nislike = no
>>> ignore_empty = yes
>>> allow_multiple_keys = no
>>> hash_size = 100
>>> }
>>> # Loaded module rlm_preprocess
>>> # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
>>> preprocess {
>>> huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
>>> hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
>>> with_ascend_hack = no
>>> ascend_channels_per_line = 23
>>> with_ntdomain_hack = no
>>> with_specialix_jetstream_hack = no
>>> with_cisco_vsa_hack = no
>>> with_alvarion_vsa_hack = no
>>> }
>>> # Loaded module rlm_radutmp
>>> # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
>>> radutmp {
>>> filename = "/var/log/radius/radutmp"
>>> username = "%{User-Name}"
>>> case_sensitive = yes
>>> check_with_nas = yes
>>> permissions = 384
>>> caller_id = yes
>>> }
>>> # Loaded module rlm_realm
>>> # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
>>> realm IPASS {
>>> format = "prefix"
>>> delimiter = "/"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
>>> realm suffix {
>>> format = "suffix"
>>> delimiter = "@"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
>>> realm realmpercent {
>>> format = "suffix"
>>> delimiter = "%"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
>>> realm ntdomain {
>>> format = "prefix"
>>> delimiter = "\\"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loaded module rlm_replicate
>>> # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
>>> # Loaded module rlm_soh
>>> # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
>>> soh {
>>> dhcp = yes
>>> }
>>> # Loaded module rlm_sql
>>> # Loading module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
>>> sql {
>>> driver = "rlm_sql_sqlite"
>>> server = ""
>>> port = 0
>>> login = ""
>>> password = <<< secret >>>
>>> radius_db = "radius"
>>> read_groups = yes
>>> read_profiles = yes
>>> read_clients = yes
>>> delete_stale_sessions = yes
>>> sql_user_name = "%{User-Name}"
>>> default_user_profile = ""
>>> client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
>>> authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
>>> authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
>>> authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
>>> authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
>>> group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
>>> simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
>>> simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-Group}' AND acctstoptime IS NULL"
>>> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
>>> accounting {
>>> reference = "%{tolower:type.%{Acct-Status-Type}.query}"
>>> type {
>>> accounting-on {
>>> query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}"
>>> }
>>> accounting-off {
>>> query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}"
>>> }
>>> start {
>>> query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', %{%{integer:Event-Timestamp}:-date('now')}, %{%{integer:Event-Timestamp}:-date('now')}, NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
>>> }
>>> interim-update {
>>> query = "UPDATE radacct SET acctupdatetime = %{%{integer:Event-Timestamp}:-date('now')}, acctinterval = 0, framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0} WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
>>> }
>>> stop {
>>> query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0}, acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
>>> }
>>> }
>>> }
>>> post-auth {
>>> reference = ".query"
>>> query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
>>> }
>>> }
>>> rlm_sql (sql): Driver rlm_sql_sqlite (module rlm_sql_sqlite) loaded and linked
>>> Creating attribute SQL-Group
>>> # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
>>> radutmp sradutmp {
>>> filename = "/var/log/radius/sradutmp"
>>> username = "%{User-Name}"
>>> case_sensitive = yes
>>> check_with_nas = yes
>>> permissions = 420
>>> caller_id = no
>>> }
>>> # Loaded module rlm_unix
>>> # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
>>> unix {
>>> radwtmp = "/var/log/radius/radwtmp"
>>> }
>>> Creating attribute Unix-Group
>>> # Loaded module rlm_unpack
>>> # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
>>> # Loaded module rlm_utf8
>>> # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
>>> instantiate {
>>> }
>>> # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
>>> # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
>>> # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
>>> # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
>>> # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
>>> # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
>>> # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
>>> # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
>>> # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
>>> # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
>>> # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
>>> # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
>>> [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
>>> [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
>>> # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
>>> # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
>>> # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
>>> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
>>> # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
>>> # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
>>> # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>> # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>> # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>> # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
>>> # Linked to sub-module rlm_eap_md5
>>> # Linked to sub-module rlm_eap_leap
>>> # Linked to sub-module rlm_eap_gtc
>>> gtc {
>>> challenge = "Password: "
>>> auth_type = "PAP"
>>> }
>>> # Linked to sub-module rlm_eap_tls
>>> tls {
>>> tls = "tls-common"
>>> }
>>> tls-config tls-common {
>>> verify_depth = 0
>>> ca_path = "/usr/local/etc/raddb/certs"
>>> pem_file_type = yes
>>> private_key_file = "/usr/local/etc/raddb/certs/server.key"
>>> certificate_file = "/usr/local/etc/raddb/certs/server.crt"
>>> ca_file = "/usr/local/etc/raddb/certs/ca.pem"
>>> dh_file = "/usr/local/etc/raddb/certs/dh"
>>> random_file = "/dev/urandom"
>>> fragment_size = 1024
>>> include_length = yes
>>> auto_chain = yes
>>> check_crl = no
>>> check_all_crl = no
>>> cipher_list = "DEFAULT"
>>> cipher_server_preference = no
>>> ecdh_curve = "prime256v1"
>>> tls_max_version = ""
>>> tls_min_version = "1.0"
>>> cache {
>>> enable = no
>>> lifetime = 24
>>> max_entries = 255
>>> }
>>> verify {
>>> skip_if_ocsp_ok = no
>>> }
>>> ocsp {
>>> enable = no
>>> override_cert_url = yes
>>> url = "http://127.0.0.1/ocsp/ <http://127.0.0.1/ocsp/>"
>>> use_nonce = yes
>>> timeout = 0
>>> softfail = no
>>> }
>>> }
>>> # Linked to sub-module rlm_eap_ttls
>>> ttls {
>>> tls = "tls-common"
>>> default_eap_type = "mschapv2"
>>> copy_request_to_tunnel = no
>>> use_tunneled_reply = no
>>> virtual_server = "inner-tunnel"
>>> include_length = yes
>>> require_client_cert = no
>>> }
>>> tls: Using cached TLS configuration from previous invocation
>>> # Linked to sub-module rlm_eap_peap
>>> peap {
>>> tls = "tls-common"
>>> default_eap_type = "mschapv2"
>>> copy_request_to_tunnel = no
>>> use_tunneled_reply = no
>>> proxy_tunneled_request_as_eap = yes
>>> virtual_server = "inner-tunnel"
>>> soh = no
>>> require_client_cert = no
>>> }
>>> tls: Using cached TLS configuration from previous invocation
>>> # Linked to sub-module rlm_eap_mschapv2
>>> mschapv2 {
>>> with_ntdomain_hack = no
>>> send_error = no
>>> }
>>> # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
>>> # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
>>> reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
>>> reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
>>> reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
>>> # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
>>> # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
>>> # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
>>> # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
>>> rlm_mschap (mschap): using internal authentication
>>> # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
>>> # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
>>> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>>> # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
>>> reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
>>> reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
>>> # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
>>> # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
>>> # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
>>> # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
>>> # Instantiating module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
>>> rlm_sql_sqlite: libsqlite version: 3.19.3
>>> sqlite {
>>> filename = "/var/db/radius/freeradius.db"
>>> busy_timeout = 200
>>> }
>>> rlm_sql (sql): Attempting to connect to database "radius"
>>> rlm_sql (sql): Initialising connection pool
>>> pool {
>>> start = 5
>>> min = 3
>>> max = 32
>>> spare = 10
>>> uses = 0
>>> lifetime = 0
>>> cleanup_interval = 30
>>> idle_timeout = 60
>>> retry_delay = 30
>>> spread = no
>>> }
>>> rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>> rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>> rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>> rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>> rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>> rlm_sql (sql): Processing generate_sql_clients
>>> rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
>>> rlm_sql (sql): Reserved connection (0)
>>> rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas
>>> rlm_sql (sql): Adding client 192.168.1.1 (router.wittle.net <http://router.wittle.net/>) to global clients list
>>> rlm_sql (192.168.1.1): Client "router.wittle.net <http://router.wittle.net/>" (sql) added
>>> rlm_sql (sql): Released connection (0)
>>> Need 5 more connections to reach 10 spares
>>> rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>> } # modules
>>> radiusd: #### Loading Virtual Servers ####
>>> server { # from file /usr/local/etc/raddb/radiusd.conf
>>> } # server
>>> server default { # from file /usr/local/etc/raddb/sites-enabled/default
>>> # Loading authenticate {...}
>>> # Loading authorize {...}
>>> # Loading preacct {...}
>>> # Loading accounting {...}
>>> # Loading post-proxy {...}
>>> # Loading post-auth {...}
>>> } # server default
>>> server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
>>> # Loading authenticate {...}
>>> # Loading authorize {...}
>>> Ignoring "ldap" (see raddb/mods-available/README.rst)
>>> # Loading session {...}
>>> # Loading post-proxy {...}
>>> # Loading post-auth {...}
>>> # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:331
>>> } # server inner-tunnel
>>> radiusd: #### Opening IP addresses and Ports ####
>>> listen {
>>> type = "auth"
>>> ipaddr = *
>>> port = 0
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> listen {
>>> type = "acct"
>>> ipaddr = *
>>> port = 0
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> listen {
>>> type = "auth"
>>> ipv6addr = ::
>>> port = 0
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> listen {
>>> type = "acct"
>>> ipv6addr = ::
>>> port = 0
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> listen {
>>> type = "auth"
>>> ipaddr = 127.0.0.1
>>> port = 18120
>>> }
>>> Listening on auth address * port 1812 bound to server default
>>> Listening on acct address * port 1813 bound to server default
>>> Listening on auth address :: port 1812 bound to server default
>>> Listening on acct address :: port 1813 bound to server default
>>> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
>>> Listening on proxy address * port 59453
>>> Listening on proxy address :: port 59454
>>> Ready to process requests
>>> (0) Received Access-Request Id 0 from 192.168.1.1:57936 to 192.168.1.2:1812 length 132
>>> (0) Service-Type = Framed-User
>>> (0) Framed-Protocol = PPP
>>> (0) User-Name = "eric"
>>> (0) MS-CHAP-Challenge = 0xa44a52e59a4f962b746b666bbe7f01d0
>>> (0) MS-CHAP2-Response = 0x21009c4d4f0f11d45c28c3329de6c537a41c00000000000000005bdc768d4b3a1dddcc032970b9a466c01f8b9380857fb562
>>> (0) NAS-IP-Address = 127.0.1.1
>>> (0) NAS-Port = 0
>>> (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
>>> (0) authorize {
>>> (0) policy filter_username {
>>> (0) if (&User-Name) {
>>> (0) if (&User-Name) -> TRUE
>>> (0) if (&User-Name) {
>>> (0) if (&User-Name =~ / /) {
>>> (0) if (&User-Name =~ / /) -> FALSE
>>> (0) if (&User-Name =~ /@[^@]*@/ ) {
>>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>>> (0) if (&User-Name =~ /\.\./ ) {
>>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
>>> (0) if (&User-Name =~ /\.$/) {
>>> (0) if (&User-Name =~ /\.$/) -> FALSE
>>> (0) if (&User-Name =~ /@\./) {
>>> (0) if (&User-Name =~ /@\./) -> FALSE
>>> (0) } # if (&User-Name) = notfound
>>> (0) } # policy filter_username = notfound
>>> (0) [preprocess] = ok
>>> (0) [chap] = noop
>>> (0) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
>>> (0) [mschap] = ok
>>> (0) [digest] = noop
>>> (0) suffix: Checking for suffix after "@"
>>> (0) suffix: No '@' in User-Name = "eric", looking up realm NULL
>>> (0) suffix: No such realm "NULL"
>>> (0) [suffix] = noop
>>> (0) eap: No EAP-Message, not doing EAP
>>> (0) [eap] = noop
>>> (0) files: users: Matched entry DEFAULT at line 181
>>> (0) [files] = ok
>>> (0) opendirectory: The host 192.168.1.1 does not have an access group.
>>> (0) [opendirectory] = ok
>>> (0) sql: EXPAND %{User-Name}
>>> (0) sql: --> eric
>>> (0) sql: SQL-User-Name set to 'eric'
>>> rlm_sql (sql): Reserved connection (1)
>>> (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
>>> (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'eric' ORDER BY id
>>> (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'eric' ORDER BY id
>>> (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
>>> (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'eric' ORDER BY priority
>>> (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'eric' ORDER BY priority
>>> (0) sql: User not found in any groups
>>> rlm_sql (sql): Released connection (1)
>>> Need 4 more connections to reach 10 spares
>>> rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>> (0) [sql] = notfound
>>> (0) [expiration] = noop
>>> (0) [logintime] = noop
>>> (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
>>> (0) pap: WARNING: Authentication will fail unless a "known good" password is available
>>> (0) [pap] = noop
>>> (0) } # authorize = ok
>>> (0) Found Auth-Type = mschap
>>> (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
>>> (0) authenticate {
>>> (0) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password
>>> (0) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password
>>> (0) mschap: No NT-Password configured. Trying OpenDirectory Authentication
>>> (0) mschap: OD username_string = eric, OD shortUserName=eric (length = 4)
>>> (0) mschap: Stepbuf server challenge :
>>> ffffffa44a52ffffffe5ffffff9a4fffffff962b746b666bffffffbe7f01ffffffd0
>>> (0) mschap: Stepbuf peer challenge :
>>> ffffff9c4d4f0f11ffffffd45c28ffffffc332ffffff9dffffffe6ffffffc537ffffffa41c
>>> (0) mschap: Stepbuf p24 :
>>> 5bffffffdc76ffffff8d4b3a1dffffffddffffffcc032970ffffffb9ffffffa466ffffffc01fffffff8bffffff93ffffff80ffffff857fffffffb562
>>> (0) [mschap] = ok
>>> (0) } # authenticate = ok
>>> (0) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default
>>> (0) post-auth {
>>> (0) update {
>>> (0) No attributes updated
>>> (0) } # update = noop
>>> (0) sql: EXPAND .query
>>> (0) sql: --> .query
>>> (0) sql: Using query template 'query'
>>> rlm_sql (sql): Reserved connection (2)
>>> (0) sql: EXPAND %{User-Name}
>>> (0) sql: --> eric
>>> (0) sql: SQL-User-Name set to 'eric'
>>> (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
>>> (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'eric', '', 'Access-Accept', '2018-12-02 21:37:24')
>>> (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'eric', '', 'Access-Accept', '2018-12-02 21:37:24')
>>> (0) sql: SQL query returned: success
>>> (0) sql: 1 record(s) updated
>>> rlm_sql (sql): Released connection (2)
>>> (0) [sql] = ok
>>> (0) [exec] = noop
>>> (0) policy remove_reply_message_if_eap {
>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
>>> (0) else {
>>> (0) [noop] = noop
>>> (0) } # else = noop
>>> (0) } # policy remove_reply_message_if_eap = noop
>>> (0) } # post-auth = ok
>>> (0) Sent Access-Accept Id 0 from 192.168.1.2:1812 to 192.168.1.1:57936 length 0
>>> (0) Framed-Protocol = PPP
>>> (0) Framed-Compression = Van-Jacobson-TCP-IP
>>> (0) Finished request
>>> Waking up in 4.9 seconds.
>>> (0) Cleaning up request packet ID 0 with timestamp +27
>>> Ready to process requests
>>>
>>>
>>>> On Dec 2, 2018, at 9:47 PM, Eric Wittle <eric at wittle.net <mailto:eric at wittle.net>> wrote:
>>>>
>>>> I’m working to migrate off of the built-in FreeRADIUS server that is being removed from OS X Server. I have a working configuration using the built-in version. However, after following the instructions that are part of the OS X Server migration guide (https://developer.apple.com/support/macos-server/macOS-Server-Service-Migration-Guide.pdf <https://developer.apple.com/support/macos-server/macOS-Server-Service-Migration-Guide.pdf>, pages 12-16), authentication fails.
>>>>
>>>> I see an error: “Sun Dec 2 21:18:34 2018 : ERROR: (2) mschap: ERROR: (null): status = eServerError” in the radius.log file.
>>>>
>>>> Following the instructions on the user list, I captured the attached debug file. Any help would be appreciated, because I’m a bit lost.
>>>>
>>>> Thanks in advance.
>>>>
>>>> -Eric
>>>>
>>>> <debugfile>
>>>>
>>>
>>
>
More information about the Freeradius-Users
mailing list