Help configuring FreeRADIUS on OS X Server - ERROR: (2) mschap: ERROR: (null): status = eServerError
Eric Wittle
eric at wittle.net
Mon Dec 3 13:16:51 CET 2018
And finally what success and failure look like from the router’s messages log:
Successful authentication with OS X Server’s FreeRADIUS 2.10:
Dec 3 12:11:39 ubnt xl2tpd[16434]: Connection established to 166.177.185.119, 60074. Local: 33742, Remote: 28 (ref=0/0). LNS session is 'default'
Dec 3 12:11:39 ubnt xl2tpd[16434]: Call established with 166.177.185.119, PID: 17357, Local: 45819, Remote: 7746, Serial: 1
Dec 3 12:11:39 ubnt pppd[17357]: pppd 2.4.4 started by root, uid 0
Dec 3 12:11:39 ubnt pppd[17357]: Connect: ppp0 <-->
Dec 3 12:11:42 ubnt pppd[17357]: Unsupported protocol 'IPv6 Control Protovol' (0x8057) received
Dec 3 12:11:43 ubnt pppd[17357]: Cannot determine ethernet address for proxy ARP
Dec 3 12:11:43 ubnt pppd[17357]: local IP address 10.255.255.0
Dec 3 12:11:43 ubnt pppd[17357]: remote IP address 192.168.6.100
Dec 3 12:12:23 ubnt pppd[17357]: Connection terminated: no multilink.
Dec 3 12:12:23 ubnt pppd[17357]: Modem hangup
Failed authentication with manually installed FreeRadius 3
Dec 3 12:13:03 ubnt xl2tpd[16434]: Connection established to 166.177.185.119, 49849. Local: 23776, Remote: 29 (ref=0/0). LNS session is 'default'
Dec 3 12:13:03 ubnt xl2tpd[16434]: Call established with 166.177.185.119, PID: 17610, Local: 11728, Remote: 7750, Serial: 1
Dec 3 12:13:03 ubnt pppd[17610]: pppd 2.4.4 started by root, uid 0
Dec 3 12:13:03 ubnt pppd[17610]: Connect: ppp0 <-->
Dec 3 12:13:06 ubnt pppd[17610]:
Dec 3 12:13:06 ubnt pppd[17610]: Peer eric failed CHAP authentication
Dec 3 12:13:12 ubnt pppd[17610]: Connection terminated: no multilink.
Dec 3 12:13:12 ubnt pppd[17610]: Modem hangup
-Eric
> On Dec 3, 2018, at 6:48 AM, Eric Wittle <eric at wittle.net> wrote:
>
> In case it helps, I’m including the packet-handling result from the OSX server bundled version that works, for the same user trying to authenticate. The bundled version is 2.2.10.
>
> -Eric
>
> rad_recv: Access-Request packet from host 192.168.1.1 port 60795, id=2, length=132
> Service-Type = Framed-User
> Framed-Protocol = PPP
> User-Name = "eric"
> MS-CHAP-Challenge = 0x7773bea95387ac16365f5290c86a3bbc
> MS-CHAP2-Response = 0x500058b7ad77e3cb4663ed328c1ca8bc8c5a00000000000000006a34bfaed3a90f2dc844d86da2b83d02f9f7a2c7dc8c5cf8
> NAS-IP-Address = 127.0.1.1
> NAS-Port = 0
> # Executing section authorize from file /Library/Server/radius/raddb/sites-enabled/default
> +group authorize {
> ++[preprocess] = ok
> ++[chap] = noop
> [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
> ++[mschap] = ok
> ++[digest] = noop
> [suffix] No '@' in User-Name = "eric", looking up realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] = noop
> [eap] No EAP-Message, not doing EAP
> ++[eap] = noop
> [files] users: Matched entry DEFAULT at line 178
> ++[files] = ok
> [opendirectory] The host 192.168.1.1 does not have an access group.
> ++[opendirectory] = ok
> ++[expiration] = noop
> ++[logintime] = noop
> [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
> ++[pap] = noop
> +} # group authorize = ok
> Found Auth-Type = MSCHAP
> # Executing group from file /Library/Server/radius/raddb/sites-enabled/default
> +group MS-CHAP {
> [mschap] No Cleartext-Password configured. Cannot create LM-Password.
> [mschap] No Cleartext-Password configured. Cannot create NT-Password.
> [mschap] Creating challenge hash with username: eric
> [mschap] Client is using MS-CHAPv2 for eric, we need NT-Password
> [mschap] Using OpenDirectory to authenticate
> [mschap] Doing OD MSCHAPv2 auth
> [mschap] Successful authentication for eric
> ++[mschap] = ok
> +} # group MS-CHAP = ok
> Login OK: [eric/<via Auth-Type = MSCHAP>] (from client router.wittle.net <http://router.wittle.net/> port 0)
> # Executing section post-auth from file /Library/Server/radius/raddb/sites-enabled/default
> +group post-auth {
> ++[exec] = noop
> +} # group post-auth = noop
> Sending Access-Accept of id 2 to 192.168.1.1 port 60795
> Framed-Protocol = PPP
> Framed-Compression = Van-Jacobson-TCP-IP
> MS-CHAP2-Success = 0x50533d35323342334444384141413539344246304330433030373546423534413133454445393738323530
> Finished request 0.
> Going to the next request
> Waking up in 4.9 seconds.
> rad_recv: Accounting-Request packet from host 192.168.1.1 port 40029, id=3, length=96
> Acct-Session-Id = "5C0514303B2A00"
> User-Name = "eric"
> Acct-Status-Type = Start
> Service-Type = Framed-User
> Framed-Protocol = PPP
> Acct-Authentic = RADIUS
> NAS-Port-Type = Async
> Framed-IP-Address = 192.168.6.100
> NAS-IP-Address = 127.0.1.1
> NAS-Port = 0
> Acct-Delay-Time = 0
> # Executing section preacct from file /Library/Server/radius/raddb/sites-enabled/default
> +group preacct {
> ++[preprocess] = ok
> [acct_unique] WARNING: Attribute NAS-Identifier was not found in request, unique ID MAY be inconsistent
> [acct_unique] Hashing 'NAS-Port = 0,,NAS-IP-Address = 127.0.1.1,Acct-Session-Id = "5C0514303B2A00",User-Name = "eric"'
> [acct_unique] Acct-Unique-Session-ID = "2a99ab6a447c4184".
> ++[acct_unique] = ok
> [suffix] No '@' in User-Name = "eric", looking up realm NULL
> [suffix] No such realm "NULL"
> ++[suffix] = noop
> ++[files] = noop
> +} # group preacct = ok
> # Executing section accounting from file /Library/Server/radius/raddb/sites-enabled/default
> +group accounting {
> [detail] expand: %{Packet-Src-IP-Address} -> 192.168.1.1
> [detail] expand: /private/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /private/var/log/radius/radacct/192.168.1.1/detail-20181203
> [detail] /private/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /private/var/log/radius/radacct/192.168.1.1/detail-20181203
> [detail] expand: %t -> Mon Dec 3 06:32:00 2018
> ++[detail] = ok
> ++[exec] = noop
> [attr_filter.accounting_response] expand: %{User-Name} -> eric
> attr_filter: Matched entry DEFAULT at line 12
> ++[attr_filter.accounting_response] = updated
> +} # group accounting = updated
> Sending Accounting-Response of id 3 to 192.168.1.1 port 40029
> Finished request 1.
> Cleaning up request 1 ID 3 with timestamp +23
> Going to the next request
> Waking up in 4.3 seconds.
> Cleaning up request 0 ID 2 with timestamp +22
> Ready to process requests.
>
>> On Dec 3, 2018, at 6:26 AM, Eric Wittle <eric at wittle.net <mailto:eric at wittle.net>> wrote:
>>
>> OK, that’s not it. I just shut down the Apple Server FreeRadius (radiusconfig -stop), started the version I built according to the migration instructions (/usr/local/sbin/radiusd -X), and tried to access the VPN. There was one additional entry added to the ApplePasswordServer.Server.log:
>>
>> Dec 3 2018 06:21:55 123216us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>>
>> So the startup & shutdown you see below would have been from when I started and stopped the directory service from the server app for other reasons. It also seems that the username & password is making it from the VPN authentication request from my iOS device through to the directory server OK, but apparently something is happening with the response.
>>
>> -Eric
>>
>>> On Dec 3, 2018, at 6:14 AM, Eric Wittle <eric at wittle.net <mailto:eric at wittle.net>> wrote:
>>>
>>> Plus I believe there was a question of whether OpenDirectory logs anything useful. After a quick set of google searches, that is a good question. The closest I could find was a set of logs in the Apple Server log folder in the PasswordService directory.
>>>
>>> The contents of ApplePasswordServer.Error.Log
>>> bash-3.2# tail -100 /Library/Logs/PasswordService/ApplePasswordServer.Error.log
>>> -- Start: Server rolled log on: Nov 13 2018 21:17:19 --
>>> Dec 2 2018 14:52:47 819295us Requested SASL mechanism not loaded: SMB-NT
>>> Dec 2 2018 15:03:43 692394us Requested SASL mechanism not loaded: SMB-NT
>>> Dec 2 2018 15:07:34 139111us Requested SASL mechanism not loaded: SMB-NT
>>>
>>> The tail end of ApplePasswordServer.Server.Log
>>>
>>> bash-3.2# tail -100 /Library/Logs/PasswordService/ApplePasswordServer.Server.log
>>> Dec 2 2018 14:52:43 233320us Stopping server processes ...
>>> Dec 2 2018 14:52:43 234062us Closing all incoming connections ...
>>> Dec 2 2018 14:52:43 234097us StopCentralThreads: Stopping Connection Listeners ...
>>> Dec 2 2018 14:52:43 234645us StopCentralThreads: Current Threads: 10
>>> Dec 2 2018 14:52:43 234669us Stopping Network Processes ...
>>> Dec 2 2018 14:52:43 234682us Deinitializing networking ...
>>> Dec 2 2018 14:52:43 234701us Server Processes Stopped ...
>>> Dec 2 2018 14:52:43 234718us RunAppThread Stopped
>>> Dec 2 2018 14:52:43 234747us RunAppThread Deleted
>>> Dec 2 2018 14:52:47 755661us Mac OS X Password Service version 424 (pid = 37915) was started at: Sun Dec 2 14:52:47 2018
>>> .
>>> Dec 2 2018 14:52:47 755702us RunAppThread Created
>>> Dec 2 2018 14:52:47 755746us RunAppThread Started
>>> Dec 2 2018 14:52:47 755760us Initializing Server Globals ...
>>> Dec 2 2018 14:52:47 768754us Initializing Networking ...
>>> Dec 2 2018 14:52:47 768819us Initializing TCP ...
>>> Dec 2 2018 14:52:47 819245us SASL is using realm "MAIL.WITTLE.NET <http://mail.wittle.net/>"
>>> Dec 2 2018 14:52:47 824367us Starting Central Thread ...
>>> Dec 2 2018 14:52:47 824401us Starting other server processes ...
>>> Dec 2 2018 14:52:47 824412us StartCentralThreads: 1 threads to stop
>>> Dec 2 2018 14:52:47 824451us Initializing TCP ...
>>> Dec 2 2018 14:52:47 824580us Starting TCP/IP Listener on ethernet interface, port 106
>>> Dec 2 2018 14:52:47 824630us Starting TCP/IP Listener on ethernet interface, port 3659
>>> Dec 2 2018 14:52:47 824723us Starting TCP/IP Listener on interface lo0, port 106
>>> Dec 2 2018 14:52:47 824762us Starting TCP/IP Listener on interface lo0, port 3659
>>> Dec 2 2018 14:52:47 824800us StartCentralThreads: Created 4 TCP/IP Connection Listeners
>>> Dec 2 2018 14:52:47 824820us Starting UNIX domain socket listener /var/run/passwordserver
>>> Dec 2 2018 14:52:47 825558us Finished starting other server processes ...
>>> Dec 2 2018 14:52:47 825582us -- Password Server successfully started --
>>> Dec 2 2018 14:52:47 825592us -- Start time: 0 sec, 74 msec --
>>> Dec 2 2018 15:03:32 701865us Stopping server processes ...
>>> Dec 2 2018 15:03:32 702676us Closing all incoming connections ...
>>> Dec 2 2018 15:03:32 702706us StopCentralThreads: Stopping Connection Listeners ...
>>> Dec 2 2018 15:03:32 703903us StopCentralThreads: Current Threads: 3
>>> Dec 2 2018 15:03:32 703930us Stopping Network Processes ...
>>> Dec 2 2018 15:03:32 703944us Deinitializing networking ...
>>> Dec 2 2018 15:03:32 703960us Server Processes Stopped ...
>>> Dec 2 2018 15:03:32 703977us RunAppThread Stopped
>>> Dec 2 2018 15:03:32 703989us RunAppThread Deleted
>>> Dec 2 2018 15:03:33 705899us Mac OS X Password Service (pid = 37915) was shut down at: Sun Dec 2 15:03:33 2018
>>> .
>>> Dec 2 2018 15:03:43 644217us Mac OS X Password Service version 424 (pid = 38843) was started at: Sun Dec 2 15:03:43 2018
>>> .
>>> Dec 2 2018 15:03:43 644253us RunAppThread Created
>>> Dec 2 2018 15:03:43 644295us RunAppThread Started
>>> Dec 2 2018 15:03:43 644316us Initializing Server Globals ...
>>> Dec 2 2018 15:03:43 677609us Initializing Networking ...
>>> Dec 2 2018 15:03:43 677736us Initializing TCP ...
>>> Dec 2 2018 15:03:43 692357us SASL is using realm "MAIL.WITTLE.NET <http://mail.wittle.net/>"
>>> Dec 2 2018 15:03:43 692877us Starting Central Thread ...
>>> Dec 2 2018 15:03:43 692895us Starting other server processes ...
>>> Dec 2 2018 15:03:43 692905us StartCentralThreads: 1 threads to stop
>>> Dec 2 2018 15:03:43 692938us Initializing TCP ...
>>> Dec 2 2018 15:03:43 693040us Starting TCP/IP Listener on ethernet interface, port 106
>>> Dec 2 2018 15:03:43 693082us Starting TCP/IP Listener on ethernet interface, port 3659
>>> Dec 2 2018 15:03:43 693110us Starting TCP/IP Listener on interface lo0, port 106
>>> Dec 2 2018 15:03:43 693133us Starting TCP/IP Listener on interface lo0, port 3659
>>> Dec 2 2018 15:03:43 693156us StartCentralThreads: Created 4 TCP/IP Connection Listeners
>>> Dec 2 2018 15:03:43 693167us Starting UNIX domain socket listener /var/run/passwordserver
>>> Dec 2 2018 15:03:43 694190us Finished starting other server processes ...
>>> Dec 2 2018 15:03:43 694212us -- Password Server successfully started --
>>> Dec 2 2018 15:03:43 694222us -- Start time: 0 sec, 54 msec --
>>> Dec 2 2018 15:05:24 289083us Stopping server processes ...
>>> Dec 2 2018 15:05:24 289128us Closing all incoming connections ...
>>> Dec 2 2018 15:05:24 289150us StopCentralThreads: Stopping Connection Listeners ...
>>> Dec 2 2018 15:05:24 290059us StopCentralThreads: Current Threads: 3
>>> Dec 2 2018 15:05:24 290086us Stopping Network Processes ...
>>> Dec 2 2018 15:05:24 290098us Deinitializing networking ...
>>> Dec 2 2018 15:05:24 290113us Server Processes Stopped ...
>>> Dec 2 2018 15:05:24 290129us RunAppThread Stopped
>>> Dec 2 2018 15:05:24 290142us RunAppThread Deleted
>>> Dec 2 2018 15:05:26 221197us Mac OS X Password Service (pid = 38843) was shut down at: Sun Dec 2 15:05:26 2018
>>> .
>>> Dec 2 2018 15:07:34 103685us Mac OS X Password Service version 424 (pid = 39140) was started at: Sun Dec 2 15:07:34 2018
>>> .
>>> Dec 2 2018 15:07:34 103718us RunAppThread Created
>>> Dec 2 2018 15:07:34 103758us RunAppThread Started
>>> Dec 2 2018 15:07:34 103779us Initializing Server Globals ...
>>> Dec 2 2018 15:07:34 118899us Initializing Networking ...
>>> Dec 2 2018 15:07:34 118961us Initializing TCP ...
>>> Dec 2 2018 15:07:34 139076us SASL is using realm "MAIL.WITTLE.NET <http://mail.wittle.net/>"
>>> Dec 2 2018 15:07:34 139134us Starting Central Thread ...
>>> Dec 2 2018 15:07:34 139141us Starting other server processes ...
>>> Dec 2 2018 15:07:34 139147us StartCentralThreads: 1 threads to stop
>>> Dec 2 2018 15:07:34 139174us Initializing TCP ...
>>> Dec 2 2018 15:07:34 139265us Starting TCP/IP Listener on ethernet interface, port 106
>>> Dec 2 2018 15:07:34 139302us Starting TCP/IP Listener on ethernet interface, port 3659
>>> Dec 2 2018 15:07:34 139322us Starting TCP/IP Listener on interface lo0, port 106
>>> Dec 2 2018 15:07:34 139350us Starting TCP/IP Listener on interface lo0, port 3659
>>> Dec 2 2018 15:07:34 139443us StartCentralThreads: Created 4 TCP/IP Connection Listeners
>>> Dec 2 2018 15:07:34 139462us Starting UNIX domain socket listener /var/run/passwordserver
>>> Dec 2 2018 15:07:34 140156us Finished starting other server processes ...
>>> Dec 2 2018 15:07:34 140178us -- Password Server successfully started --
>>> Dec 2 2018 15:07:34 140190us -- Start time: 0 sec, 41 msec --
>>> Dec 2 2018 20:01:57 945387us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>>> Dec 2 2018 20:35:44 395239us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>>> Dec 2 2018 20:37:17 158109us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>>> Dec 2 2018 20:37:43 63472us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>>> Dec 2 2018 21:17:05 402081us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>>> Dec 2 2018 21:37:24 961075us AUTH2: {0x0a0b655a7dae11e49289ac87a301f654, eric} MS-CHAPv2 authentication succeeded.
>>>
>>> It is interesting in the above logs to see that the ApplePasswordServer is starting and stopping. Since I’m starting the OS X Server built-in freeradius instance with “radiusconfig -start”, and stoping it with “radiusconfig -stop”, I’m now wondering if the password server isn’t running when I start the version of FreeRADIUS I’m trying to install manually outside of OS X server.
>>>
>>> I’ll take a look and see if radiusconfig is a script…
>>>
>>> -Eric
>>>
>>>> On Dec 3, 2018, at 5:41 AM, Eric Wittle <eric at wittle.net <mailto:eric at wittle.net>> wrote:
>>>>
>>>> Pasted this time…
>>>>
>>>> FreeRADIUS Version 3.0.17
>>>> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
>>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>>>> PARTICULAR PURPOSE
>>>> You may redistribute copies of FreeRADIUS under the terms of the
>>>> GNU General Public License
>>>> For more information about these matters, see the file named COPYRIGHT
>>>> Starting - reading configuration files ...
>>>> including dictionary file /usr/local/share/freeradius/dictionary
>>>> including dictionary file /usr/local/share/freeradius/dictionary.dhcp
>>>> including dictionary file /usr/local/share/freeradius/dictionary.vqp
>>>> including dictionary file /usr/local/etc/raddb/dictionary
>>>> including configuration file /usr/local/etc/raddb/radiusd.conf
>>>> including configuration file /usr/local/etc/raddb/proxy.conf
>>>> including configuration file /usr/local/etc/raddb/clients.conf
>>>> including files in directory /usr/local/etc/raddb/mods-enabled/
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/always
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/chap
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/date
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/detail
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/digest
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/eap
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/echo
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/exec
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/expiration
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/expr
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/files
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/linelog
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/logintime
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/mschap
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/opendirectory
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/pap
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/passwd
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/realm
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/replicate
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/soh
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/sql
>>>> including configuration file /usr/local/etc/raddb/mods-config/sql/main/sqlite/queries.conf
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/unix
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/unpack
>>>> including configuration file /usr/local/etc/raddb/mods-enabled/utf8
>>>> including files in directory /usr/local/etc/raddb/policy.d/
>>>> including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
>>>> including configuration file /usr/local/etc/raddb/policy.d/accounting
>>>> including configuration file /usr/local/etc/raddb/policy.d/canonicalization
>>>> including configuration file /usr/local/etc/raddb/policy.d/control
>>>> including configuration file /usr/local/etc/raddb/policy.d/cui
>>>> including configuration file /usr/local/etc/raddb/policy.d/debug
>>>> including configuration file /usr/local/etc/raddb/policy.d/dhcp
>>>> including configuration file /usr/local/etc/raddb/policy.d/eap
>>>> including configuration file /usr/local/etc/raddb/policy.d/filter
>>>> including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids
>>>> including configuration file /usr/local/etc/raddb/policy.d/operator-name
>>>> including files in directory /usr/local/etc/raddb/sites-enabled/
>>>> including configuration file /usr/local/etc/raddb/sites-enabled/default
>>>> including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
>>>> main {
>>>> security {
>>>> allow_core_dumps = no
>>>> }
>>>> name = "radiusd"
>>>> prefix = "/usr/local"
>>>> localstatedir = "/var"
>>>> logdir = "/var/log/radius"
>>>> run_dir = "/var/run/radiusd"
>>>> }
>>>> main {
>>>> name = "radiusd"
>>>> prefix = "/usr/local"
>>>> localstatedir = "/var"
>>>> sbindir = "/usr/local/sbin"
>>>> logdir = "/var/log/radius"
>>>> run_dir = "/var/run/radiusd"
>>>> libdir = "/usr/local/lib"
>>>> radacctdir = "/var/log/radius/radacct"
>>>> hostname_lookups = no
>>>> max_request_time = 30
>>>> cleanup_delay = 5
>>>> max_requests = 16384
>>>> pidfile = "/var/run/radiusd/radiusd.pid"
>>>> checkrad = "/usr/local/sbin/checkrad"
>>>> debug_level = 0
>>>> proxy_requests = yes
>>>> log {
>>>> stripped_names = no
>>>> auth = no
>>>> auth_badpass = no
>>>> auth_goodpass = no
>>>> colourise = yes
>>>> msg_denied = "You are already logged in - access denied"
>>>> }
>>>> resources {
>>>> }
>>>> security {
>>>> max_attributes = 200
>>>> reject_delay = 1.000000
>>>> status_server = yes
>>>> allow_vulnerable_openssl = "no"
>>>> }
>>>> }
>>>> radiusd: #### Loading Realms and Home Servers ####
>>>> proxy server {
>>>> retry_delay = 5
>>>> retry_count = 3
>>>> default_fallback = no
>>>> dead_time = 120
>>>> wake_all_if_all_dead = no
>>>> }
>>>> home_server localhost {
>>>> ipaddr = 127.0.0.1
>>>> port = 1812
>>>> type = "auth"
>>>> secret = <<< secret >>>
>>>> response_window = 20.000000
>>>> response_timeouts = 1
>>>> max_outstanding = 65536
>>>> zombie_period = 40
>>>> status_check = "status-server"
>>>> ping_interval = 30
>>>> check_interval = 30
>>>> check_timeout = 4
>>>> num_answers_to_alive = 3
>>>> revive_interval = 120
>>>> limit {
>>>> max_connections = 16
>>>> max_requests = 0
>>>> lifetime = 0
>>>> idle_timeout = 0
>>>> }
>>>> coa {
>>>> irt = 2
>>>> mrt = 16
>>>> mrc = 5
>>>> mrd = 30
>>>> }
>>>> }
>>>> home_server_pool my_auth_failover {
>>>> type = fail-over
>>>> home_server = localhost
>>>> }
>>>> realm example.com <http://example.com/> {
>>>> auth_pool = my_auth_failover
>>>> }
>>>> realm LOCAL {
>>>> }
>>>> radiusd: #### Loading Clients ####
>>>> client localhost {
>>>> ipaddr = 127.0.0.1
>>>> require_message_authenticator = no
>>>> secret = <<< secret >>>
>>>> nas_type = "other"
>>>> proto = "*"
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> client localhost_ipv6 {
>>>> ipv6addr = ::1
>>>> require_message_authenticator = no
>>>> secret = <<< secret >>>
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> Debugger not attached
>>>> # Creating Auth-Type = mschap
>>>> # Creating Auth-Type = digest
>>>> # Creating Auth-Type = eap
>>>> # Creating Auth-Type = PAP
>>>> # Creating Auth-Type = CHAP
>>>> # Creating Auth-Type = MS-CHAP
>>>> # Creating Auth-Type = opendirectory
>>>> radiusd: #### Instantiating modules ####
>>>> modules {
>>>> # Loaded module rlm_always
>>>> # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always
>>>> always reject {
>>>> rcode = "reject"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
>>>> always fail {
>>>> rcode = "fail"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
>>>> always ok {
>>>> rcode = "ok"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always
>>>> always handled {
>>>> rcode = "handled"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
>>>> always invalid {
>>>> rcode = "invalid"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
>>>> always userlock {
>>>> rcode = "userlock"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
>>>> always notfound {
>>>> rcode = "notfound"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
>>>> always noop {
>>>> rcode = "noop"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always
>>>> always updated {
>>>> rcode = "updated"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loaded module rlm_attr_filter
>>>> # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.post-proxy {
>>>> filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
>>>> key = "%{Realm}"
>>>> relaxed = no
>>>> }
>>>> # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.pre-proxy {
>>>> filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
>>>> key = "%{Realm}"
>>>> relaxed = no
>>>> }
>>>> # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.access_reject {
>>>> filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
>>>> key = "%{User-Name}"
>>>> relaxed = no
>>>> }
>>>> # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.access_challenge {
>>>> filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
>>>> key = "%{User-Name}"
>>>> relaxed = no
>>>> }
>>>> # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.accounting_response {
>>>> filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
>>>> key = "%{User-Name}"
>>>> relaxed = no
>>>> }
>>>> # Loaded module rlm_cache
>>>> # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
>>>> cache cache_eap {
>>>> driver = "rlm_cache_rbtree"
>>>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>>>> ttl = 15
>>>> max_entries = 0
>>>> epoch = 0
>>>> add_stats = no
>>>> }
>>>> # Loaded module rlm_chap
>>>> # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
>>>> # Loaded module rlm_date
>>>> # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
>>>> date {
>>>> format = "%b %e %Y %H:%M:%S %Z"
>>>> utc = no
>>>> }
>>>> # Loaded module rlm_detail
>>>> # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
>>>> detail {
>>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> escape_filenames = no
>>>> log_packet_header = no
>>>> }
>>>> # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>>> detail auth_log {
>>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> escape_filenames = no
>>>> log_packet_header = no
>>>> }
>>>> # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>>> detail reply_log {
>>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> escape_filenames = no
>>>> log_packet_header = no
>>>> }
>>>> # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>>> detail pre_proxy_log {
>>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> escape_filenames = no
>>>> log_packet_header = no
>>>> }
>>>> # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>>> detail post_proxy_log {
>>>> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> escape_filenames = no
>>>> log_packet_header = no
>>>> }
>>>> # Loaded module rlm_digest
>>>> # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
>>>> # Loaded module rlm_dynamic_clients
>>>> # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
>>>> # Loaded module rlm_eap
>>>> # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
>>>> eap {
>>>> default_eap_type = "ttls"
>>>> timer_expire = 60
>>>> ignore_unknown_eap_types = no
>>>> cisco_accounting_username_bug = no
>>>> max_sessions = 16384
>>>> }
>>>> # Loaded module rlm_exec
>>>> # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
>>>> exec echo {
>>>> wait = yes
>>>> program = "/bin/echo %{User-Name}"
>>>> input_pairs = "request"
>>>> output_pairs = "reply"
>>>> shell_escape = yes
>>>> }
>>>> # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
>>>> exec {
>>>> wait = no
>>>> input_pairs = "request"
>>>> shell_escape = yes
>>>> timeout = 10
>>>> }
>>>> # Loaded module rlm_expiration
>>>> # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
>>>> # Loaded module rlm_expr
>>>> # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
>>>> expr {
>>>> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
>>>> }
>>>> # Loaded module rlm_files
>>>> # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
>>>> files {
>>>> filename = "/usr/local/etc/raddb/mods-config/files/authorize"
>>>> acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
>>>> preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
>>>> }
>>>> # Loaded module rlm_linelog
>>>> # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
>>>> linelog {
>>>> filename = "/var/log/radius/linelog"
>>>> escape_filenames = no
>>>> syslog_severity = "info"
>>>> permissions = 384
>>>> format = "This is a log message for %{User-Name}"
>>>> reference = "messages.%{%{reply:Packet-Type}:-default}"
>>>> }
>>>> # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
>>>> linelog log_accounting {
>>>> filename = "/var/log/radius/linelog-accounting"
>>>> escape_filenames = no
>>>> syslog_severity = "info"
>>>> permissions = 384
>>>> format = ""
>>>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>>>> }
>>>> # Loaded module rlm_logintime
>>>> # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
>>>> logintime {
>>>> minimum_timeout = 60
>>>> }
>>>> # Loaded module rlm_mschap
>>>> # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
>>>> mschap {
>>>> use_mppe = yes
>>>> require_encryption = no
>>>> require_strong = no
>>>> with_ntdomain_hack = yes
>>>> passchange {
>>>> }
>>>> allow_retry = yes
>>>> winbind_retry_with_normalised_username = no
>>>> use_open_directory = yes
>>>> }
>>>> # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
>>>> exec ntlm_auth {
>>>> wait = yes
>>>> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
>>>> shell_escape = yes
>>>> }
>>>> # Loaded module rlm_opendirectory
>>>> # Loading module "opendirectory" from file /usr/local/etc/raddb/mods-enabled/opendirectory
>>>> # Loaded module rlm_pap
>>>> # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
>>>> pap {
>>>> normalise = yes
>>>> }
>>>> # Loaded module rlm_passwd
>>>> # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
>>>> passwd etc_passwd {
>>>> filename = "/etc/passwd"
>>>> format = "*User-Name:Crypt-Password:"
>>>> delimiter = ":"
>>>> ignore_nislike = no
>>>> ignore_empty = yes
>>>> allow_multiple_keys = no
>>>> hash_size = 100
>>>> }
>>>> # Loaded module rlm_preprocess
>>>> # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
>>>> preprocess {
>>>> huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
>>>> hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
>>>> with_ascend_hack = no
>>>> ascend_channels_per_line = 23
>>>> with_ntdomain_hack = no
>>>> with_specialix_jetstream_hack = no
>>>> with_cisco_vsa_hack = no
>>>> with_alvarion_vsa_hack = no
>>>> }
>>>> # Loaded module rlm_radutmp
>>>> # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
>>>> radutmp {
>>>> filename = "/var/log/radius/radutmp"
>>>> username = "%{User-Name}"
>>>> case_sensitive = yes
>>>> check_with_nas = yes
>>>> permissions = 384
>>>> caller_id = yes
>>>> }
>>>> # Loaded module rlm_realm
>>>> # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
>>>> realm IPASS {
>>>> format = "prefix"
>>>> delimiter = "/"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
>>>> realm suffix {
>>>> format = "suffix"
>>>> delimiter = "@"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
>>>> realm realmpercent {
>>>> format = "suffix"
>>>> delimiter = "%"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
>>>> realm ntdomain {
>>>> format = "prefix"
>>>> delimiter = "\\"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Loaded module rlm_replicate
>>>> # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
>>>> # Loaded module rlm_soh
>>>> # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
>>>> soh {
>>>> dhcp = yes
>>>> }
>>>> # Loaded module rlm_sql
>>>> # Loading module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
>>>> sql {
>>>> driver = "rlm_sql_sqlite"
>>>> server = ""
>>>> port = 0
>>>> login = ""
>>>> password = <<< secret >>>
>>>> radius_db = "radius"
>>>> read_groups = yes
>>>> read_profiles = yes
>>>> read_clients = yes
>>>> delete_stale_sessions = yes
>>>> sql_user_name = "%{User-Name}"
>>>> default_user_profile = ""
>>>> client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
>>>> authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
>>>> authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
>>>> authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
>>>> authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
>>>> group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
>>>> simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
>>>> simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-Group}' AND acctstoptime IS NULL"
>>>> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
>>>> accounting {
>>>> reference = "%{tolower:type.%{Acct-Status-Type}.query}"
>>>> type {
>>>> accounting-on {
>>>> query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}"
>>>> }
>>>> accounting-off {
>>>> query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}"
>>>> }
>>>> start {
>>>> query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', %{%{integer:Event-Timestamp}:-date('now')}, %{%{integer:Event-Timestamp}:-date('now')}, NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
>>>> }
>>>> interim-update {
>>>> query = "UPDATE radacct SET acctupdatetime = %{%{integer:Event-Timestamp}:-date('now')}, acctinterval = 0, framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0} WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
>>>> }
>>>> stop {
>>>> query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0}, acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
>>>> }
>>>> }
>>>> }
>>>> post-auth {
>>>> reference = ".query"
>>>> query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
>>>> }
>>>> }
>>>> rlm_sql (sql): Driver rlm_sql_sqlite (module rlm_sql_sqlite) loaded and linked
>>>> Creating attribute SQL-Group
>>>> # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
>>>> radutmp sradutmp {
>>>> filename = "/var/log/radius/sradutmp"
>>>> username = "%{User-Name}"
>>>> case_sensitive = yes
>>>> check_with_nas = yes
>>>> permissions = 420
>>>> caller_id = no
>>>> }
>>>> # Loaded module rlm_unix
>>>> # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
>>>> unix {
>>>> radwtmp = "/var/log/radius/radwtmp"
>>>> }
>>>> Creating attribute Unix-Group
>>>> # Loaded module rlm_unpack
>>>> # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
>>>> # Loaded module rlm_utf8
>>>> # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
>>>> instantiate {
>>>> }
>>>> # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
>>>> # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
>>>> # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
>>>> # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
>>>> # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
>>>> # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
>>>> # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
>>>> # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
>>>> # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
>>>> # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>>> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
>>>> # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>>> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
>>>> # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>>> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
>>>> [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
>>>> [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
>>>> # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>>> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
>>>> # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
>>>> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
>>>> # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
>>>> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
>>>> # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
>>>> # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>>> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
>>>> # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>>> # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>>> # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
>>>> # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
>>>> # Linked to sub-module rlm_eap_md5
>>>> # Linked to sub-module rlm_eap_leap
>>>> # Linked to sub-module rlm_eap_gtc
>>>> gtc {
>>>> challenge = "Password: "
>>>> auth_type = "PAP"
>>>> }
>>>> # Linked to sub-module rlm_eap_tls
>>>> tls {
>>>> tls = "tls-common"
>>>> }
>>>> tls-config tls-common {
>>>> verify_depth = 0
>>>> ca_path = "/usr/local/etc/raddb/certs"
>>>> pem_file_type = yes
>>>> private_key_file = "/usr/local/etc/raddb/certs/server.key"
>>>> certificate_file = "/usr/local/etc/raddb/certs/server.crt"
>>>> ca_file = "/usr/local/etc/raddb/certs/ca.pem"
>>>> dh_file = "/usr/local/etc/raddb/certs/dh"
>>>> random_file = "/dev/urandom"
>>>> fragment_size = 1024
>>>> include_length = yes
>>>> auto_chain = yes
>>>> check_crl = no
>>>> check_all_crl = no
>>>> cipher_list = "DEFAULT"
>>>> cipher_server_preference = no
>>>> ecdh_curve = "prime256v1"
>>>> tls_max_version = ""
>>>> tls_min_version = "1.0"
>>>> cache {
>>>> enable = no
>>>> lifetime = 24
>>>> max_entries = 255
>>>> }
>>>> verify {
>>>> skip_if_ocsp_ok = no
>>>> }
>>>> ocsp {
>>>> enable = no
>>>> override_cert_url = yes
>>>> url = "http://127.0.0.1/ocsp/ <http://127.0.0.1/ocsp/>"
>>>> use_nonce = yes
>>>> timeout = 0
>>>> softfail = no
>>>> }
>>>> }
>>>> # Linked to sub-module rlm_eap_ttls
>>>> ttls {
>>>> tls = "tls-common"
>>>> default_eap_type = "mschapv2"
>>>> copy_request_to_tunnel = no
>>>> use_tunneled_reply = no
>>>> virtual_server = "inner-tunnel"
>>>> include_length = yes
>>>> require_client_cert = no
>>>> }
>>>> tls: Using cached TLS configuration from previous invocation
>>>> # Linked to sub-module rlm_eap_peap
>>>> peap {
>>>> tls = "tls-common"
>>>> default_eap_type = "mschapv2"
>>>> copy_request_to_tunnel = no
>>>> use_tunneled_reply = no
>>>> proxy_tunneled_request_as_eap = yes
>>>> virtual_server = "inner-tunnel"
>>>> soh = no
>>>> require_client_cert = no
>>>> }
>>>> tls: Using cached TLS configuration from previous invocation
>>>> # Linked to sub-module rlm_eap_mschapv2
>>>> mschapv2 {
>>>> with_ntdomain_hack = no
>>>> send_error = no
>>>> }
>>>> # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
>>>> # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
>>>> reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
>>>> reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
>>>> reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
>>>> # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
>>>> # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
>>>> # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
>>>> # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
>>>> rlm_mschap (mschap): using internal authentication
>>>> # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
>>>> # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
>>>> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>>>> # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
>>>> reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
>>>> reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
>>>> # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
>>>> # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
>>>> # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
>>>> # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
>>>> # Instantiating module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
>>>> rlm_sql_sqlite: libsqlite version: 3.19.3
>>>> sqlite {
>>>> filename = "/var/db/radius/freeradius.db"
>>>> busy_timeout = 200
>>>> }
>>>> rlm_sql (sql): Attempting to connect to database "radius"
>>>> rlm_sql (sql): Initialising connection pool
>>>> pool {
>>>> start = 5
>>>> min = 3
>>>> max = 32
>>>> spare = 10
>>>> uses = 0
>>>> lifetime = 0
>>>> cleanup_interval = 30
>>>> idle_timeout = 60
>>>> retry_delay = 30
>>>> spread = no
>>>> }
>>>> rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
>>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>>> rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
>>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>>> rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
>>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>>> rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
>>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>>> rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
>>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>>> rlm_sql (sql): Processing generate_sql_clients
>>>> rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
>>>> rlm_sql (sql): Reserved connection (0)
>>>> rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas
>>>> rlm_sql (sql): Adding client 192.168.1.1 (router.wittle.net <http://router.wittle.net/>) to global clients list
>>>> rlm_sql (192.168.1.1): Client "router.wittle.net <http://router.wittle.net/>" (sql) added
>>>> rlm_sql (sql): Released connection (0)
>>>> Need 5 more connections to reach 10 spares
>>>> rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
>>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>>> } # modules
>>>> radiusd: #### Loading Virtual Servers ####
>>>> server { # from file /usr/local/etc/raddb/radiusd.conf
>>>> } # server
>>>> server default { # from file /usr/local/etc/raddb/sites-enabled/default
>>>> # Loading authenticate {...}
>>>> # Loading authorize {...}
>>>> # Loading preacct {...}
>>>> # Loading accounting {...}
>>>> # Loading post-proxy {...}
>>>> # Loading post-auth {...}
>>>> } # server default
>>>> server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
>>>> # Loading authenticate {...}
>>>> # Loading authorize {...}
>>>> Ignoring "ldap" (see raddb/mods-available/README.rst)
>>>> # Loading session {...}
>>>> # Loading post-proxy {...}
>>>> # Loading post-auth {...}
>>>> # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:331
>>>> } # server inner-tunnel
>>>> radiusd: #### Opening IP addresses and Ports ####
>>>> listen {
>>>> type = "auth"
>>>> ipaddr = *
>>>> port = 0
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> listen {
>>>> type = "acct"
>>>> ipaddr = *
>>>> port = 0
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> listen {
>>>> type = "auth"
>>>> ipv6addr = ::
>>>> port = 0
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> listen {
>>>> type = "acct"
>>>> ipv6addr = ::
>>>> port = 0
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> listen {
>>>> type = "auth"
>>>> ipaddr = 127.0.0.1
>>>> port = 18120
>>>> }
>>>> Listening on auth address * port 1812 bound to server default
>>>> Listening on acct address * port 1813 bound to server default
>>>> Listening on auth address :: port 1812 bound to server default
>>>> Listening on acct address :: port 1813 bound to server default
>>>> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
>>>> Listening on proxy address * port 59453
>>>> Listening on proxy address :: port 59454
>>>> Ready to process requests
>>>> (0) Received Access-Request Id 0 from 192.168.1.1:57936 to 192.168.1.2:1812 length 132
>>>> (0) Service-Type = Framed-User
>>>> (0) Framed-Protocol = PPP
>>>> (0) User-Name = "eric"
>>>> (0) MS-CHAP-Challenge = 0xa44a52e59a4f962b746b666bbe7f01d0
>>>> (0) MS-CHAP2-Response = 0x21009c4d4f0f11d45c28c3329de6c537a41c00000000000000005bdc768d4b3a1dddcc032970b9a466c01f8b9380857fb562
>>>> (0) NAS-IP-Address = 127.0.1.1
>>>> (0) NAS-Port = 0
>>>> (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
>>>> (0) authorize {
>>>> (0) policy filter_username {
>>>> (0) if (&User-Name) {
>>>> (0) if (&User-Name) -> TRUE
>>>> (0) if (&User-Name) {
>>>> (0) if (&User-Name =~ / /) {
>>>> (0) if (&User-Name =~ / /) -> FALSE
>>>> (0) if (&User-Name =~ /@[^@]*@/ ) {
>>>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>>>> (0) if (&User-Name =~ /\.\./ ) {
>>>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
>>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
>>>> (0) if (&User-Name =~ /\.$/) {
>>>> (0) if (&User-Name =~ /\.$/) -> FALSE
>>>> (0) if (&User-Name =~ /@\./) {
>>>> (0) if (&User-Name =~ /@\./) -> FALSE
>>>> (0) } # if (&User-Name) = notfound
>>>> (0) } # policy filter_username = notfound
>>>> (0) [preprocess] = ok
>>>> (0) [chap] = noop
>>>> (0) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
>>>> (0) [mschap] = ok
>>>> (0) [digest] = noop
>>>> (0) suffix: Checking for suffix after "@"
>>>> (0) suffix: No '@' in User-Name = "eric", looking up realm NULL
>>>> (0) suffix: No such realm "NULL"
>>>> (0) [suffix] = noop
>>>> (0) eap: No EAP-Message, not doing EAP
>>>> (0) [eap] = noop
>>>> (0) files: users: Matched entry DEFAULT at line 181
>>>> (0) [files] = ok
>>>> (0) opendirectory: The host 192.168.1.1 does not have an access group.
>>>> (0) [opendirectory] = ok
>>>> (0) sql: EXPAND %{User-Name}
>>>> (0) sql: --> eric
>>>> (0) sql: SQL-User-Name set to 'eric'
>>>> rlm_sql (sql): Reserved connection (1)
>>>> (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
>>>> (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'eric' ORDER BY id
>>>> (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'eric' ORDER BY id
>>>> (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
>>>> (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'eric' ORDER BY priority
>>>> (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'eric' ORDER BY priority
>>>> (0) sql: User not found in any groups
>>>> rlm_sql (sql): Released connection (1)
>>>> Need 4 more connections to reach 10 spares
>>>> rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
>>>> rlm_sql_sqlite: Opening SQLite database "/var/db/radius/freeradius.db"
>>>> (0) [sql] = notfound
>>>> (0) [expiration] = noop
>>>> (0) [logintime] = noop
>>>> (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
>>>> (0) pap: WARNING: Authentication will fail unless a "known good" password is available
>>>> (0) [pap] = noop
>>>> (0) } # authorize = ok
>>>> (0) Found Auth-Type = mschap
>>>> (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
>>>> (0) authenticate {
>>>> (0) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password
>>>> (0) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password
>>>> (0) mschap: No NT-Password configured. Trying OpenDirectory Authentication
>>>> (0) mschap: OD username_string = eric, OD shortUserName=eric (length = 4)
>>>> (0) mschap: Stepbuf server challenge :
>>>> ffffffa44a52ffffffe5ffffff9a4fffffff962b746b666bffffffbe7f01ffffffd0
>>>> (0) mschap: Stepbuf peer challenge :
>>>> ffffff9c4d4f0f11ffffffd45c28ffffffc332ffffff9dffffffe6ffffffc537ffffffa41c
>>>> (0) mschap: Stepbuf p24 :
>>>> 5bffffffdc76ffffff8d4b3a1dffffffddffffffcc032970ffffffb9ffffffa466ffffffc01fffffff8bffffff93ffffff80ffffff857fffffffb562
>>>> (0) [mschap] = ok
>>>> (0) } # authenticate = ok
>>>> (0) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default
>>>> (0) post-auth {
>>>> (0) update {
>>>> (0) No attributes updated
>>>> (0) } # update = noop
>>>> (0) sql: EXPAND .query
>>>> (0) sql: --> .query
>>>> (0) sql: Using query template 'query'
>>>> rlm_sql (sql): Reserved connection (2)
>>>> (0) sql: EXPAND %{User-Name}
>>>> (0) sql: --> eric
>>>> (0) sql: SQL-User-Name set to 'eric'
>>>> (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
>>>> (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'eric', '', 'Access-Accept', '2018-12-02 21:37:24')
>>>> (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'eric', '', 'Access-Accept', '2018-12-02 21:37:24')
>>>> (0) sql: SQL query returned: success
>>>> (0) sql: 1 record(s) updated
>>>> rlm_sql (sql): Released connection (2)
>>>> (0) [sql] = ok
>>>> (0) [exec] = noop
>>>> (0) policy remove_reply_message_if_eap {
>>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
>>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
>>>> (0) else {
>>>> (0) [noop] = noop
>>>> (0) } # else = noop
>>>> (0) } # policy remove_reply_message_if_eap = noop
>>>> (0) } # post-auth = ok
>>>> (0) Sent Access-Accept Id 0 from 192.168.1.2:1812 to 192.168.1.1:57936 length 0
>>>> (0) Framed-Protocol = PPP
>>>> (0) Framed-Compression = Van-Jacobson-TCP-IP
>>>> (0) Finished request
>>>> Waking up in 4.9 seconds.
>>>> (0) Cleaning up request packet ID 0 with timestamp +27
>>>> Ready to process requests
>>>>
>>>>
>>>>> On Dec 2, 2018, at 9:47 PM, Eric Wittle <eric at wittle.net <mailto:eric at wittle.net>> wrote:
>>>>>
>>>>> I’m working to migrate off of the built-in FreeRADIUS server that is being removed from OS X Server. I have a working configuration using the built-in version. However, after following the instructions that are part of the OS X Server migration guide (https://developer.apple.com/support/macos-server/macOS-Server-Service-Migration-Guide.pdf <https://developer.apple.com/support/macos-server/macOS-Server-Service-Migration-Guide.pdf>, pages 12-16), authentication fails.
>>>>>
>>>>> I see an error: “Sun Dec 2 21:18:34 2018 : ERROR: (2) mschap: ERROR: (null): status = eServerError” in the radius.log file.
>>>>>
>>>>> Following the instructions on the user list, I captured the attached debug file. Any help would be appreciated, because I’m a bit lost.
>>>>>
>>>>> Thanks in advance.
>>>>>
>>>>> -Eric
>>>>>
>>>>> <debugfile>
>>>>>
>>>>
>>>
>>
>
More information about the Freeradius-Users
mailing list